IS10/Tn10 transposition efficiently accommodates diverse transposon end configurations.

Transposon Tn10 and its component insertion sequence IS10 move by non-replicative transposition. We have studied the array of reaction intermediates and products in a high efficiency in vitro IS10/Tn10 transposition reaction. Synapsis of two transposon ends, followed by cleavage and strand transfer, can occur very efficiently irrespective of the relative locations and orientations of the two ends. The two participating ends can occur in inverted or direct orientation on the same molecule or, most importantly, on two different molecules. This behavior contrasts sharply with that of Mu, in which transposition is strongly biased in favor of inverted repeat synapsis. Mechanistically, the absence of discrimination amongst various end configurations implies that the architecture within the IS10/Tn10 synaptic complex is relatively simple, i.e. lacking any significant intertwining of component DNA strands. Biologically these observations are important because they suggest that the IS10 insertion sequence module has considerable flexibility in the types of DNA rearrangements that it can promote. Most importantly, it now seems highly probable that a single non-replicative IS10 element can promote DNA rearrangements usually attributed to replicative transposition, i.e. adjacent deletions and cointegrates, by utilizing transposon ends on two sister chromosomes. Other events which probably also contribute to the diversity of IS10/Tn10-promoted rearrangements are discussed.     

Single active site catalysis of the successive phosphoryl transfer steps by DNA transposases: insights from phosphorothioate stereoselectivity

The transposase family of proteins mediate DNA transposition or retroviral DNA integration via multistep phosphoryl transfer reactions. For Tn10 and phage Mu, a single active site of one transposase protomer catalyzes the successive transposition reaction steps. We examined phosphorothioate stereoselectivity at the scissile position for all four reaction steps catalyzed by the Tn10 transposase. The results suggest that the first three steps required for double-strand cutting at the transposon end proceed as a succession of pseudo-reverse reaction steps while the 3' end of the transposon remains bound to the same side of the active site. However, the mode of substrate binding to the active site changes for the cut transposon 3' end to target DNA strand joining. The phosphorothioate stereoselectivity of the corresponding steps of phage Mu transposition and HIV DNA integration matches that of Tn10 reaction, indicating a common mode of substrate-active site interactions for this class of DNA transposition reactions.     

Kinetic and structural analysis of a cleaved donor intermediate and a strand transfer intermediate in Tn10 transposition.

Tn10 transposes by a nonreplicative "cut and paste" mechanism. We describe here two protein-DNA complexes that are reaction intermediates in the Tn10 transposition process: a cleaved donor complex whose DNA component consists of transposon sequences cleanly excised from flanking donor DNA, and a strand transfer complex whose DNA component contains transposon termini specifically joined to a target site. The kinetic behavior of the first species suggests that it is an early intermediate in the transposition reaction. These two Tn10 complexes are closely analogous to complexes identified in the pathway for replicative "cointegrate" formation by bacteriophage Mu and thus represent intermediates that may be common to both nonreplicative and replicative transposition. These and other results suggest that the Tn10 and Mu reactions are fundamentally very similar despite their very different biological outcomes. The critical difference between the two reactions is the fate of the DNA strand that is not joined to target DNA.     

Tn7 transposition in vitro proceeds through an excised transposon intermediate generated by staggered breaks in DNA.

We have developed a cell-free system in which the bacterial transposon Tn7 inserts at high frequency into its preferred target site in the Escherichia coli chromosome, attTn7; Tn7 transposition in vitro requires ATP and Tn7-encoded proteins. Tn7 transposes via a cut and paste mechanism in which the element is excised from the donor DNA by staggered double-strand breaks and then inserted into attTn7 by the joining of 3' transposon ends to 5' target ends. Neither recombination intermediates nor products are observed in the absence of any protein component or DNA substrate. Thus, we suggest that Tn7 transposition occurs in a nucleoprotein complex containing several proteins and the substrate DNAs and that recognition of attTn7 within this complex provokes strand cleavages at the Tn7 ends.     

The transpososome: control of transposition at the level of catalysis

Studies of several transposable genetic elements have pinpointed the importance of the transpososome, a nucleoprotein complex involving the transposon ends and a transposon-encoded enzyme--the transposase--as a key in regulating transposition. Transpososomes provide a precise architecture within which the chemical reactions involved in transposon displacement occur. Data are accumulating that suggest they are dynamic and undergo staged conformational changes to accommodate different steps in the transposition pathway. This has been underpinned by recent results obtained particularly with Tn5, Tn10 and bacteriophage Mu.     

Role of DNA topology in Mu transposition: mechanism of sensing the relative orientation of two DNA segments

DNA strand transfer at the initiation of Mu transposition normally requires a negatively supercoiled transposon donor molecule, containing both ends of Mu in inverted repeat orientation. We propose that the specific relative orientation of the Mu ends is needed only to energetically favor a particular configuration that the ends must adopt in a synaptic complex. The model was tested by constructing special donor DNA substrates that, because of their catenation or knotting, energetically favor this same configuration of the Mu ends, even though they are on separate molecules or in direct repeat orientation. These structures are efficient substrates for the strand transfer reaction, whereas appropriate control structures are not. The result eliminates tracking or protein scaffold models for orientation preference. Several other systems in which the relative orientation of two DNA segments is sensed may utilize the same mechanism.     

Mechanisms of metal ion action in Tn10 transposition

Tn10/IS10 transposition involves assembly of a synaptic complex (or transpososome) in which two transposon ends are paired, followed by four distinct chemical steps at each transposon end. The chemical steps are dependent on the presence of a suitable divalent metal cation (Me(2+)). Transpososome assembly and structure are also affected by Me(2+). To gain further insight into the mechanisms of Me(2+) action in Tn10/IS10 transposition we have investigated the effects of substituting Mn(2+) for Mg(2+), the physiologic Me(2+), in transposition. We have also investigated the significance of an Me(2+)-assisted conformational change in transpososome structure. We show that Mn(2+) has two previously unrecognized effects on the Tn10 donor cleavage reaction. It accelerates the rates of hairpin formation and hairpin resolution without significantly affecting the rate of the first chemical step, first strand nicking. Mn(2+) also relaxes the specificity of first strand nicking. We also show that Me(2+)-assisted transpososome unfolding coincides with a structural transition in the transposon-donor junction that may be necessary for hairpin formation. Possible mechanisms for these observations are considered.     

Tn5 transposase loops DNA in the absence of Tn5 transposon end sequences

Transposases mediate transposition first by binding specific DNA end sequences that define a transposable element and then by organizing protein and DNA into a highly structured and stable nucleoprotein 'synaptic' complex. Synaptic complex assembly is a central checkpoint in many transposition mechanisms. The Tn5 synaptic complex contains two Tn5 transposase subunits and two Tn5 transposon end sequences, exhibits extensive protein-end sequence DNA contacts and is the node of a DNA loop. Using single-molecule and bulk biochemical approaches, we found that Tn5 transposase assembles a stable nucleoprotein complex in the absence of Tn5 transposon end sequences. Surprisingly, this end sequence-independent complex has structural similarities to the synaptic complex. This complex is the node of a DNA loop; transposase dimerization and DNA specificity mutants affect its assembly; and it likely has the same number of proteins and DNA molecules as the synaptic complex. Furthermore, our results indicate that Tn5 transposase preferentially binds and loops a subset of non-Tn5 end sequences. Assembly of end sequence-independent nucleoprotein complexes likely plays a role in the in vivo downregulation of transposition and the cis-transposition bias of many bacterial transposases.     

Functional coupling between the two active sites during Tn 10 transposition buffers the mutation of sequences critical for DNA hairpin processing

DNA processing reactions often involve multiple components acting in concert to achieve the desired outcome. However, it is usually difficult to know how the components communicate and cooperate to orchestrate an ordered series of events. We address this question in the context of the Tn 10 transposition reaction, in which the DNA cleavage and joining events occur within a higher-order complex containing a transposase dimer, two transposon ends and the DNA-bending host-factor IHF (Integration Host Factor). Previously it was shown that the complex is asymmetric. The a side consists of an IHF protomer initially immobilized by a DNA-loop, but subsequently used to promote conformational changes required for the cleavage steps. The beta side of the complex was considered to fulfil a more passive role. Here we show that the a side of the complex promotes coupled conformational changes at both transposon ends, while the a and beta sides communicate and cooperate to dominate different phases of the transposition reaction. Together, these effects provide for a robust response to critical changes in the transposon end. These findings also explain the intriguing genetic phenotypes of a series of previously reported Tn10 mutants and have consequences for the evolution of new elements.     

Specific DNA cleavage mediated by the integrase of conjugative transposon Tn916.

The conjugative transposon Tn916 encodes a protein called INT(Tn916) which, based on DNA sequence comparisons, is a member of the integrase family of site-specific recombinases. Integrase proteins such as INT(lambda), FLP, and XERC/D that promote site-specific recombination use characteristic, conserved amino acid residues to catalyze the cleavage and ligation of DNA substrates during recombination. The reaction proceeds by a two-step transesterification reaction requiring the formation of a covalent protein-DNA intermediate. Different requirements for homology between recombining DNA sites during integrase-mediated site-specific recombination and Tn916 transposition suggest that INT(Tn916) may use a reaction mechanism different from that used by other integrase recombinases. We show that purified INT(Tn916) mediates specific cleavage of duplex DNA substrates containing the Tn916 transposon ends and adjacent bacterial sequences. Staggered cleavages occur at both ends of the transposon, resulting in 5' hydroxyl protruding ends containing coupling sequences. These are sequences that are transferred with the transposon from donor to recipient during conjugative transposition. The nature of the cleavage products suggests that a covalent protein-DNA linkage occurs via a residue of INT(Tn916) and the 3'-phosphate group of the DNA. INT(Tn916) alone is capable of executing the strand cleavage step required for recombination during Tn916 transposition, and this reaction probably occurs by a mechanism similar to that of other integrase family site-specific recombinases.     

A specific class of IS10 transposase mutants are blocked for target site interactions and promote formation of an excised transposon fragment

We report the identification and characterization of a class of IS10 transposase mutants that carry out only some of the steps required for transposition. These mutants were identified among transposition-defective mutants as a specific subclass that retains the wild-type ability to induce SOS functions in the presence of transposon ends. Mutants of this class successfully promote excision of the element from its donor site, but do not promote transfer of the transposon sequences to a target site. SOS induction presumably results from the degradation of the donor site. Uniquely among transposition-defective mutants, SOS+ Tnsp- mutants promote the formation of a new product, the excised transposon fragment (ETF), which consists of the transposon excised from the original donor molecule by double-strand breaks at the transposon ends. SOS+ Tnsp- mutants identified thus far define two patches of amino acids that might correspond to regions of different function. A single additional mutation maps within a region that is highly conserved among IS element transposases. The existence of SOS+ Tnsp- mutants and the structure of the ETF provide strong support for the previously proposed nonreplicative model of Tn10/IS10 transposition.     

Formation of a nucleoprotein complex containing Tn7 and its target DNA regulates transposition initiation

Tn7 insertion into its specific target site, attTn7, is mediated by the proteins TnsA, TnsB, TnsC and TnsD. The double-strand breaks that separate Tn7 from the donor DNA require the Tns proteins, the transposon and an attTn7 target DNA, suggesting that a prerequisite for transposition is the formation of a nucleoprotein complex containing TnsABC+D, and these DNAs. Here, we identify a TnsABC+D transposon-attTn7 complex, and demonstrate that it is a transposition intermediate. We demonstrate that an interaction between TnsB, the transposase subunit that binds to the transposon ends, and TnsC, the target DNA-binding protein that controls the activity of the transposase, is essential for assembly of the TnsABC+D transposon-attTn7 complex. We also show that certain TnsB residues are required for recombination because they mediate a TnsB-TnsC interaction critical to formation of the TnsABC+D transposon-attTn7 complex. We demonstrate that TnsA, the other transposase subunit, which also interacts with TnsC, greatly stabilizes the TnsABC+D transposon-attTn7 complex. Thus multiple interactions between the transposase subunits, TnsA and TnsB, and the target-binding transposase activator, TnsC, control Tn7 transposition.     

Tn10 transposition and circle formation in vitro

We describe a cell-free system that promotes Tn10 transposition and transposon circle formation, a related intramolecular event. Tn10 circle formation in vitro has been characterized in detail, and is shown to require a supercoiled substrate and to proceed in the absence of ATP. The reaction requires Tn10 transposase protein, and either of two E. coli proteins, integration host factor (IHF) and HU, which are small DNA binding proteins that change the conformation of DNA. Tn10 is composed of inverted repeats of insertion sequence IS10. Pair-wise combinations of the IS10 "outside" and "inside" ends mediate distinct classes of rearrangements in vivo, and they exhibit different reaction requirements in vitro. In contrast to the Tn10 reaction, which involves two outside ends, circle formation with two inside ends proceeds with a transposase fraction alone, in the absence of added host factors, and is inhibited by methylation of the dam site within each terminus.     

Absence of direct repeats flanking transposons resulting from intramolecular transposition

Tn2660 is an ampicillin-resistance-conferring transposon with a high degree of homology for the transposon Tn3. The nucleotide sequences flanking the termini of Tn2660 have been determined on plasmids inferred to have resulted from both inter- and intramolecular transposition of Tn2660. In all cases, transposition of Tn2660, as of Tn3, creates 5-bp flanking direct repeats, except following intramolecular transposition resulting from trans ligation. In this case, in R6K replicons, the nucleotide sequence between the two Tn2660 elements is stably inverted from the normal orientation, and 5-bp direct repeats do not flank each transposon, but instead flank opposite ends of the two transposon copies.     

Intramolecular transposition by Tn10

Transposon Tn10 promotes the formation of a circular product containing only transposon sequences. We show that these circles result from an intramolecular transposition reaction in which all of the strand cleavage and ligation events have occurred but newly created transposon/target junctions have not undergone repair. The unligated strand termini at these junctions are those expected according to a simple model in which the target DNA is cleaved by a pair of staggered nicks 9 bp apart, transposon sequences are separated from flanking donor DNA by cleavage at the terminal nucleotides on both strands (at both ends) of the element, and 3' transposon strand ends are ligated to 5' target strand ends. The stability of the unligated junctions suggests that they are protected from cellular processing by transposase and/or host proteins. We propose that the nonreplicative nature of Tn10 transposition is determined by the efficiency with which the nontransferred transposon strand is separated from flanking donor DNA and by the nature of the protein-DNA complexes present at the strand transfer junctions.     

DNA-protein complexes during attachment-site synapsis in Mu DNA transposition.

Initial events in Mu DNA transposition involve specific recognition of Mu DNA ends (att sites) and an internal enhancer site by the Mu transposase (A protein). This interaction between A protein and Mu DNA sequences present on a supercoiled DNA substrate leads to the formation of a stable synaptic complex in which the att ends are nicked, prior to DNA strand transfer. This study examines the properties of a synaptic complex proficient for DNA transposition. We show that the A protein binds as a monomer to its binding sites, and causes the DNA to bend through approximately 90 degrees at each site. All six att binding sites (three at each Mu end) are occupied by A within the synaptic complex. Three of these sites are loosely held and can be emptied of A upon challenge with heparin. A synaptic complex with only three sites occupied is stable and is fully competent in the subsequent strand-transfer step of transposition.     

The C-terminal alpha helix of Tn5 transposase is required for synaptic complex formation

An important step in Tn5 transposition requires transposase-transposase homodimerization to form a synaptic complex competent for cleavage of transposon DNA free from the flanking sequence. We demonstrate that the C-terminal helix of Tn5 transposase (residues 458-468 of 476 total amino acids) is required for synaptic complex formation during Tn5 transposition. Specifically, deletion of eight amino acids or more from the C terminus greatly reduces or abolishes synaptic complex formation in vitro. Due to this impaired synaptic complex formation, transposases lacking eight amino acids are also defective in the cleavage step of transposition. Interactions within the synaptic complex dimer interface were investigated by site-directed mutagenesis, and residues required for synaptic complex formation include amino acids comprising the dimer interface in the Tn5 inhibitor x-ray crystal structure dimer. Because the crystal structure dimer was hypothesized to be the inhibitory complex and not a synaptic complex, this result was surprising. Based on these data, models for both in vivo and in vitro synaptic complex formation are presented.     

Phage Mu transposition immunity reflects supercoil domain structure of the chromosome

Transposition immunity is the negative influence that the presence of one transposon sequence has on the probability of a second identical element inserting in the same site or in sites nearby. A transposition-defective Mu derivative (MudJr1) produced transposition immunity in both directions from one insertion point in the Salmonella typhimurium chromosome. To control for the sequence preference of Mu transposition proteins, Tn10 elements were introduced as targets at various distances from an immunity-conferring MudJr1 element. Mu transposition into a Tn10 target was not detectable when the distance of separation from MudJr1 was 5 kb, and transposition was unencumbered when the separation was 25 kb. Between 5 kb and 25 kb, immunity decayed gradually with distance. Immunity decayed more sharply in a gyrase mutant than in a wild-type strain. We propose that Mu transposition immunity senses the domain structure of bacterial chromosomes.