Crystal structure of the complex formed between a group I phospholipase A2 and a naturally occurring fatty acid at 2.7 A resolution

This is the first evidence of a naturally bound fatty acid to a group I Phospholipase A(2) (PLA(2)) and also to a PLA(2) with Asp 49. The fatty acid identified as n-tridecanoic acid is observed at the substrate recognition site of PLA(2) hydrophobic channel. The complex was isolated from the venom of Bungarus caeruleus (Common Indian Krait). The primary sequence of the PLA(2) was determined using the cDNA method. Three-dimensional structure has been solved by the molecular replacement method and refined using the CNS package to a final R factor of 19.8% for the data in the resolution range from 20.0 to 2.7 A. The final refined model is comprised of 912 protein atoms, one sodium ion, one molecule of n-tridecanoic acid, and 60 water molecules. The sodium ion is located in the calcium-binding loop with a sevenfold coordination. A characteristic extra electron density was observed in the hydrophobic channel of the enzyme, into which a molecule of n-tridecanoic acid was clearly fitted. The MALDI-TOF measurements of the crystals had earlier indicated an increase in the molecular mass of PLA(2) by 212 Da over the native PLA(2). A major part of the ligand fits well in the binding pocket and interacts directly with His 48 and Asp 49. Although the overall structure of PLA(2) in the present complex is similar to the native structure reported earlier, it differs significantly in the folding of its calcium-binding loop.     

A novel prokaryotic phospholipase A2. Characterization, gene cloning, and solution structure

Until now, phospholipase A(2) (PLA(2); EC 3.1.14) has been found only from eukaryotic sources. In the present study, we found a secreted PLA(2), which is produced by a soil bacterium, Streptomyces violaceoruber A-2688, demonstrating that the enzyme is the first phospholipase A(2) identified in prokaryote. After characterization of the novel PLA(2), a gene encoding the enzyme was cloned, sequenced, and overexpressed using a Streptomyces host-vector system. The amino acid sequence showed that the prokaryotic PLA(2) has only four cysteines and less homology to the eukaryotic ones, which have 12-16 cysteines. The solution structures of the prokaryotic PLA(2), bound and unbound with calcium(II) ion, were determined by using the NMR technique and structure calculation. The overall structure of the S. violaceoruber PLA(2), which is composed of only five alpha-helices, is completely different from those of eukaryotic PLA(2)s, which consist of beta-sheets and alpha-helices. The structure of the calcium-binding domain is obviously distinct from that without the ion; the ligands for the calcium(II) ion are the two carboxylates of Asp(43) (monodentate) and Asp(65) (bidentate), the carbonyl oxygen of Leu(44), and three water molecules. A calcium-binding experiment showed that the calcium dissociation constant ( approximately 5 mm) for the prokaryotic PLA(2) is much larger than those of eukaryotic ones.     

Crystal structure of a heterodimer of phospholipase A2 from Naja naja sagittifera at 2.3 A resolution reveals the presence of a new PLA2-like protein with a novel cys 32-Cys 49 disulphide bridge with a bound sugar at the substrate-binding site

The crystal structure of the phospholipase A2 (PLA2) heterodimer from Naja naja sagittifera reveals the presence of a new PLA2-like protein with eight disulphide bridges. The heterodimer is formed between a commonly observed group I PLA2 having seven characteristic disulfide bonds and a novel PLA2-like protein (Cys-PLA2) containing two extra cysteines at two highly conserved sites (positions 32 and 49) of structural and functional importance. The crystals of the heterodimer belong to tetragonal space group P41212 with cell dimensions, a = b = 77.7 A and c = 68.4 A corresponding to a solvent content of 33%, which is one of the lowest values observed so far in the PLA2 crystals. The structure has been solved with molecular replacement method and refined to a final R value of 21.6% [Rfree = 25.6%]. The electron density revealed the presence of cysteines 32 and 49 that are covalently linked to give rise to an eighth disulphide bridge in the PLA2-like monomer. A non-protein high-quality electron density was also observed at the substrate-binding site in the PLA2-like protein that has been interpreted as N-acetylglucosamine. The overall tertiary folds of the two monomers are similar having all features of PLA2-type folding. A zinc ion is detected at the interface of the heterodimer with fivefold coordination while another zinc ion was found on the surface of Cys-PLA2 with sixfold coordination. The conformations of the calcium-binding loops of both monomers are significantly different from each other as well as from those in other group I PLA2s. The N-acetylglucosamine molecule is favorably placed in the substrate-binding site of Cys-PLA2 and forms five hydrogen bonds and several van der Waals interactions with protein atoms, thus indicating a strong affinity. It also provides clue of the possible mechanism of sugar recognition by PLA2 and PLA2-like proteins. The formation of heterodimer seems to have been induced by zinc ion.     

Sequence and crystal structure determination of a basic phospholipase A2 from common krait (Bungarus caeruleus) at 2.4 A resolution: identification and characterization of its pharmacological sites

This is the first phospholipase A2 (PLA2) structure from the family of kraits. The protein was isolated from Bungarus caeruleus (common krait) and the primary sequence was determined using cDNA approach. Three-dimensional structure of this presynaptic neurotoxic PLA2 from group I has been determined by molecular replacement method using the model of PLA2 component of beta2-bungarotoxin (Bungarus multicinctus) and refined using CNS package to a final R-factor of 20.1 % for all the data in resolution range 20.0-2.4 A. The final refined model comprises 897 protein atoms and 77 water molecules. The overall framework of krait phospholipase A2 with three long helices and two short antiparallel beta-strands is extremely similar to those observed for other group I PLA2s. However, the critical parts of PLA2 folding are concerned with its various functional loops. The conformations of these loops determine the efficiency of enzyme action and presence/absence of various pharmacological functions. In the present structure calcium-binding loop is occupied by a sodium ion with a 7-fold co-ordination. The conformation of loop 55-75 in krait PLA2 corresponds to a very high activity of the enzyme. A comparison of its sequence with multimeric PLA2s clearly shows the absence of critical residues such as Tyr3, Trp61 and Phe64, which are involved in the multimerization of PLA2 molecules. The protein shows anticoagulant and neurotoxic activities.     

Structural analysis of the zinc hydroxide–Thr-199–Glu-106 hydrogen-bond network in human carbonic anhydrase II

The singnificance of the zinc hydroxide–Thr-199–Glu-106 hydrogen-bond network in the active site of human carbonic anhydrase II has been examined by X-ray crystallographic analyses of site-specific mutants. Mutants with Ala-199 and Ala-106 or Gln-106 have low catalytic activities, while a mutant with Asp-106 has almost full CO₂ hydration activity. The structures of these four mutants, as well as that of the bicarbonate complex of the mutant with Ala-199, have been determined at 1.7 to 2.2 Å resolution. Removal of the γ atoms of residue 199 leads to distorted tetrahedral geometry at the zine ion, and a catalytically important zinc-bound water molecule has moved towards Glu-106. In the bicarbonate complex of the mutant with Ala-199 one oxygen atom from bicarbonate binds to zinc without displacing this water molecule. Tetrahedral coordination geometries are retained in the mutants at position 106. The mutants with Ala-106 and Gln-106 have a zinc-bound sulfate ion, whereas this sulfate site is only partially occupied in the mutant with Asp-106. The hydrogen-bond network seems to be “reversed” in the mutants with Ala-106 and Gln-106. The network is preserved as in native enzyme in the mutant with Asp-106 but the side chain of Asp-106 is more extended than that of Glu-106 in the native enzyme. These results illustrate the importance of Glu-106 and Thr-199 for controlling the precise coordination geometry of the zinc ion and its ligand preferences with results in an optimal orientation of a zine-bound hydroxide ion for an attack on the CO₂ substrate. © 1993 Wiley-Liss, Inc.     

Three-dimensional structure of a presynaptic neurotoxic phospholipase A2 from Daboia russelli pulchella at 2.4 A resolution

The phospholipase A(2 )from Daboia russelli pulchella (DPLA(2)) is the only known member of subclass II of group IIA. The three-dimensional structure of this presynaptic neurotoxic DPLA(2) enzyme has been determined at 2.4 A resolution. The structure was determined by the molecular replacement method using the model Crotalus atrox, and refined using X-PLOR to a final R-factor of 18.8 % for all data in the resolution range 20.0 A-2.4 A. The final refined model comprises 1888 atoms from two crystallographically independent protein molecules and 160 water oxygen atoms. The overall folding of DPLA(2), with three long helices and two short antiparallel beta-strands is grossly similar to those observed for other PLA(2)s. In the present structure, the calcium binding site is empty but the conformation of the calcium binding loop is similar to those observed in the calcium bound states. Two spatially adjacent regions of residues 55-61 (a typical beta-turn I) and 83-94 (a well defined loop) are remarkably different in conformation, electrostatic characteristics and inter-segmental interactions from those found in non-neurotoxic PLA(2)s. Yet another striking structural feature in DPLA(2 )pertains to the stretch of residues 53-77, which has a series of positively charged residues protruding outwardly. The above segment is presumed to be involved in the anticoagulant activity. A unique hydrophobic patch including residues Leu17, Ala18, Ile19, Pro20, Phe106 and Leu110 is found on the surface together with an equally emphatic region of -OH groups containing residues such as Ser21, Tyr22, Ser23, Ser24, Tyr25 and Tyr28. The interactions between two molecules of DPLA(2) in the asymmetric unit are remarkably different from those observed in the standard dimers and trimers of PLA(2)s, leaving the enzyme's active site fully exposed for enzyme-substrate reactions, it makes this structure one of the most favourable examples for structure-based drug design through soaking experiments.     

Crystal structure of activated ribulose-1,5-bisphosphate carboxylase complexed with its substrate, ribulose-1,5-bisphosphate

The three-dimensional structure of the complex of ribulose-1,5-bisphosphate carboxylase from Rhodospirillum rubrum, CO2, Mg2+, and ribulose bisphosphate has been determined with x-ray crystallographic methods to 2.6-A resolution. Ribulose-1,5-bisphosphate binds across the active site with the two phosphate groups in the two phosphate binding sites of the beta/alpha barrel. The oxygen atoms of the carbamate and the side chain of Asp-193 provide the protein ligands to the bound Mg2+ ion. The C2 and the C3 or C4 oxygen atoms of the substrate are also within the first coordination sphere of the metal ion. At the present resolution of the electron density maps, two slightly different conformations of the substrate, with the C3 hydroxyl group "cis" or "trans" to the C2 oxygen, can be built into the observed electron density. The two different conformations suggest two different mechanisms of proton abstraction in the first step of catalysis, the enolization of the ribulose 1,5-bisphosphate. Two loop regions, which are disordered in the crystals of the nonactivated enzyme, could be built into their respective electron density. A comparison with the structure of the quaternary complex of the spinach enzyme shows that despite the different conformations of loop 6, the positions of the Mg2+ ion, and most atoms of the substrate are very similar when superimposed on each other. There are, however, some significant differences at the active site, especially in the metal coordination sphere.     

Interaction of metal ions with carboxylic and carboxamide groups in protein structures

An analysis of the geometry of metal binding by carboxylic and carboxamide groups in proteins is presented. Most of the ligands are from aspartic and glutamic acid side chains. Water molecules bound to carboxylate anions are known to interact with oxygen lone-pairs. However, metal ions are also found to approach the carboxylate group along the C-O direction. More metal ions are found to be along the syn than the anti lone-pair direction. This seems to be the result of the stability of the five-membered ring that is formed by the carboxylate anion hydrogen bonded to a ligand water molecule and the metal ion in the syn position. Ligand residues are usually from the helix, turn or regions with no regular secondary structure. Because of the steric interactions associated with bringing all the ligands around a metal center, a calcium ion can bind only near the ends of a helix; a metal, like zinc, with a low coordination number, can bind anywhere in the helix. Based on the analysis of the positions of water molecules in the metal coordination sphere, the sequence of the EF hand (a calcium-binding structure) is discussed.     

Crystal structure of phospholipase A2 complex with the hydrolysis products of platelet activating factor: equilibrium binding of fatty acid and lysophospholipid-ether at the active site may be mutually exclusive

We have solved the 1.55 A crystal structure of the anion-assisted dimer of porcine pancreatic group IB phospholipase A2 (PLA2), complexed with the products of hydrolysis of the substrate platelet activating factor. The dimer contains five coplanar phosphate anions bound at the contact surface between the two PLA2 subunits. This structure parallels a previously reported anion-assisted dimer that mimics the tetrahedral intermediate of PLA2 bound to a substrate interface [Pan, Y. H., et al. (2001) Biochemistry 40, 609-617]. The dimer structure has a molecule of the product acetate bound in subunit A and the other product 1-octadecyl-sn-glycero-3-phosphocholine (LPC-ether) to subunit B. Therefore, this structure is of the two individual product binary complexes and not of a ternary complex with both products in one active site of PLA2. Protein crystals with bound products were only obtained by cocrystallization starting from the initial substrate. In contrast, an alternate crystal form was obtained when PLA2 was cocrystallized with LPC-ether and succinate, and this crystal form did not contain bound products. The product bound structure has acetate positioned in the catalytic site of subunit A such that one of its oxygen atoms is located 3.5 A from the catalytic calcium. Likewise, a longer than typical Ca-to-Gly(32) carbonyl distance of 3.4 A results in a final Ca coordination that is four-coordinate and has distorted geometry. The other oxygen of acetate makes hydrogen bonds with N(delta)(1)-His(48), O(delta)(1)-Asp(49), and the catalytic assisting water (w7). In contrast, the glycerophosphocholine headgroup of LPC-ether in subunit B makes no contacts with calcium or with the catalytic residues His(48) or Asp(49). The tail of the LPC-ether is located near the active site pocket with the last nine carbons of the sn-1- acyl chain refined in two alternate conformations. The remaining atoms of the LPC-ether product have been modeled into the solvent channel but have their occupancies set to zero in the refined model due to disorder. Together, the crystallographic and equilibrium binding results with the two products show that the simultaneous binding of both the products in a single active site is not favored.     

Glutamic acid 71 and aspartic acid 66 control the binding of the second calcium ion in porcine pancreatic phospholipase A2

In addition to the Ca2+ ion at the active site, porcine pancreatic phospholipase A2 (PLA) is known to bind a second calcium ion with a lower affinity at alkaline pH. The second calcium-binding site has been held responsible for effective interaction of phospholipase with organized lipid/water interfaces [van Dam-Mieras, M. C. E., Slotboom, A. J., Pieterson, W. A. and de Haas, G. H. (1975) Biochemistry 14, 5387-5394]. To study the identity of the acidic amino acid residues involved in liganding the second calcium ion in detail, we used site-directed mutagenesis to specifically alter the cDNA encoding porcine pancreatic phospholipase. Three mutant phospholipase species were constructed, each of which lacked one of the potentially important carboxylates: Asp66----Asn, Glu71----Asn and Glu92----Gln. The Gln92 mutant PLA displayed the same properties as native phospholipase indicating that Glu92 is not important for binding the second metal ion. However, Glu71 and, to a lesser extent, Asp66 are both directly involved in the low-affinity calcium binding.     

Predicting calcium-binding sites in proteins - a graph theory and geometry approach

Identifying calcium-binding sites in proteins is one of the first steps towards predicting and understanding the role of calcium in biological systems for protein structure and function studies. Due to the complexity and irregularity of calcium-binding sites, a fast and accurate method for predicting and identifying calcium-binding protein is needed. Here we report our development of a new fast algorithm (GG) to detect calcium-binding sites. The GG algorithm uses a graph theory algorithm to find oxygen clusters of the protein and a geometric algorithm to identify the center of these clusters. A cluster of four or more oxygen atoms has a high potential for calcium binding. High performance with about 90% site sensitivity and 80% site selectivity has been obtained for three datasets containing a total of 123 proteins. The results suggest that a sphere of a certain size with four or more oxygen atoms on the surface and without other atoms inside is necessary and sufficient for quickly identifying the majority of the calcium-binding sites with high accuracy. Our finding opens a new avenue to visualize and analyze calcium-binding sites in proteins facilitating the prediction of functions from structural genomic information.     

The crystal structure of prokaryotic phospholipase A2

In this study, the x-ray crystal structures of the calcium-free and calcium-bound forms of phospholipase A(2) (PLA(2)), produced extracellularly by Streptomyces violaceoruber, were determined by using the multiple isomorphous replacement and molecular replacement methods, respectively. The former and latter structures were refined to an R-factor of 18.8% at a 1.4-A resolution and an R-factor of 15.0% at a 1.6-A resolution, respectively. The overall structure of the prokaryotic PLA(2) exhibits a novel folding topology that demonstrates that it is completely distinct from those of eukaryotic PLA(2)s, which have been already determined by x-ray and NMR analyses. Furthermore, the coordination geometry of the calcium(II) ion apparently deviated from that of eukaryotic PLA(2)s. Regardless of the evolutionary divergence, the catalytic mechanism including the calcium(II) ion on secreted PLA(2) seems to be conserved between prokaryotic and eukaryotic cells. Demonstrating that the overall structure determined by x-ray analysis is almost the same as that determined by NMR analysis is useful to discuss the catalytic mechanism at the molecular level of the bacterial PLA(2).     

Structure and function of the catalytic site mutant Asp 99 Asn of phospholipase A2: absence of the conserved structural water.

To probe the role of the Asp-99 ... His-48 pair in phospholipase A2 (PLA2) catalysis, the X-ray structure and kinetic characterization of the mutant Asp-99-->Asn-99 (D99N) of bovine pancreatic PLA2 was undertaken. Crystals of D99N belong to the trigonal space group P3(1)21 and were isomorphous to the wild type (WT) (Noel JP et al., 1991, Biochemistry 30:11801-11811). The 1.9-A X-ray structure of the mutant showed that the carbonyl group of Asn-99 side chain is hydrogen bonded to His-48 in the same way as that of Asp-99 in the WT, thus retaining the tautomeric form of His-48 and the function of the enzyme. The NH2 group of Asn-99 points away from His-48. In contrast, in the D102N mutant of the protease enzyme trypsin, the NH2 group of Asn-102 is hydrogen bonded to His-57 resulting in the inactive tautomeric form and hence the loss of enzymatic activity. Although the geometry of the catalytic triad in the PLA2 mutant remains the same as in the WT, we were surprised that the conserved structural water, linking the catalytic site with the ammonium group of Ala-1 of the interfacial site, was ejected by the proximity of the NH2 group of Asn-99. The NH2 group now forms a direct hydrogen bond with the carbonyl group of Ala-1.     

Crystallographic portrayal of different conformational states of a Lys49 phospholipase A₂ homologue: insights into structural determinants for myotoxicity and dimeric configuration

Catalytically inactive phospholipase A(2) (PLA(2)) homologues play key roles in the pathogenesis induced by snake envenomation, causing extensive tissue damage via a mechanism still unknown. Although, the amino acid residues directly involved in catalysis are conserved, the substitution of Asp49 by Arg/Lys/Gln or Ser prevents the binding of the essential calcium ion and hence these proteins are incapable of hydrolyzing phospholipids. In this work, the crystal structure of a Lys49-PLA(2) homologue from Bothrops brazili (MTX-II) was solved in two conformational states: (a) native, with Lys49 singly coordinated by the backbone oxygen atom of Val31 and (b) complexed with tetraethylene glycol (TTEG). Interestingly, the TTEG molecule was observed in two different coordination cages depending on the orientation of the nominal calcium-binding loop and of the residue Lys49. These structural observations indicate a direct role for the residue Lys49 in the functioning of a catalytically inactive PLA(2) homologue suggesting a contribution of the active site-like region in the expression of pharmacological effects such as myotoxicity and edema formation. Despite the several crystal structures of Lys49-PLA(2) homologues already determined, their biological assembly remains controversial with two possible conformations. The extended dimer with the hydrophobic channel exposed to the solvent and the compact dimer in which the active site-like region is occluded by the dimeric interface. In the MTX-II crystal packing analysis was found only the extended dimer as a possible stable quaternary arrangement.     

A gadolinium(III) complex of a carboxylic-phosphorus acid derivative of diethylenetriamine covalently bound to inulin, a potential macromolecular MRI contrast agent

A novel conjugate of a polysaccharide and a Gd(III) chelate with potential as contrast agent for magnetic resonance imaging (MRI) was synthesized. The structure of the chelate was derived from H5DTPA by replacing the central pendant arm by a phosphinic acid functional group, which was covalently bound to the polysaccharide inulin. On the average, each monosaccharide unit of the inulin was attached to approximately one (0.9) chelate moiety. The average molecular weight is 23110 and the average number of Gd3+ ions per molecule is 24. The ligand binds the Gd3+ ion in an octadentate fashion via three nitrogen atoms, four carboxylate oxygen atoms, and one P-O oxygen atom, and its first coordination sphere is completed by a water molecule. This compound shows promising properties for application as a contrast agent for MRI thanks to a favorable residence lifetime of this water molecule (170 ns at 298 K), a relatively long rotational correlation time (866 ps at 298 K), and the presence of two water molecules in the second coordination sphere of the Gd3+ ion. Furthermore, its stability toward transmetalation with Zn(II) is as high as that of the clinically used [Gd(DTPA)(H2O)]2-.     

Structural investigations of calcium binding and its role in activity and activation of outer membrane phospholipase A from Escherichia coli

Outer membrane phospholipase A (OMPLA) is an integral membrane enzyme that catalyses the hydrolysis of phospholipids. Enzymatic activity is regulated by reversible dimerisation and calcium-binding. We have investigated the role of calcium by X-ray crystallography. In monomeric OMPLA, one calcium ion binds between two external loops (L3L4 site) at 10 A from the active site. After dimerisation, a new calcium-binding site (catalytic site) is formed at the dimer interface in the active site of each molecule at 6 A from the L3L4 calcium site. The close spacing and the difference in calcium affinity of both sites suggests that the L3L4 site may function as a storage site for a calcium ion, which relocates to the catalytic site upon dimerisation. A sequence alignment demonstrates conservation of the catalytic calcium site but evolutionary variation of the L3L4 site. The residues in the dimer interface are conserved as well, suggesting that all outer membrane phospholipases require dimerisation and calcium in the catalytic site for activity. For this family of phospholipases, we have characterised a consensus sequence motif (YTQ-X(n)-G-X(2)-H-X-SNG) that contains conserved residues involved in dimerisation and catalysis.     

Fine structure-activity analysis of mutations at position 51 of tyrosyl-tRNA synthetase

Residue Thr-51 at the active site of tyrosyl-tRNA synthetase (Bacillus stearothermophilus) has been replaced with all the smaller amino acids by protein engineering to investigate direct and indirect effects of mutation on substrate binding and catalysis. The gamma-hydroxyl group of Thr-51 was thought to be 0.5 A too far from the ribose ring oxygen of ATP to form a hydrogen bond. Consistent with this, it is found that mutation of Thr-51----Cys-51, which should place the gamma-thiol group within its correct distance for hydrogen bonding, increases the affinity of the enzyme for ATP. Other mutations (Ser-51, Ala-51, and Gly-51) show the contributions to binding of the other atoms in the side chain of Thr-51. A family of enzymes has been produced, TyrTS(Thr-51) (wild type), TyrTS(Ala-51), TyrTS(Cys-51), and TyrTS(Pro-51), in which the value of kcat/KM for ATP in aminoacylation increases along the series. This is achieved by the value of KM decreasing significantly (2.5, 1.25, 0.29, and 0.019 mM, respectively) while there are smaller decreases in kcat (4.7, 4.0, 2.9, and 1.8 s-1, respectively). These variations cause each one of the enzymes to be more active than the others at particular concentrations of ATP. For example, at concentrations of ATP greater than 5.9 mM, TyrTS(Thr-51) is the most active, while TyrTS(Ala-51), TyrTS(Cys-51), and TyrTS(Pro-51) are the most active at 5.9-2.2, 2.2-0.42, and less than 0.42 mM ATP, respectively. Interestingly, position 51 shows variation in tyrosyl-tRNA synthetases isolated from different organisms.     

Amino acid composition and NH2-terminal amino acid sequence of human phospholipase A2 purified from rheumatoid synovial fluid

The amino acid composition and partial NH2-terminal amino acid sequence of an extracellular phospholipase A2 in human rheumatoid synovial fluid were determined. The predominant amino acids in the phospholipase A2 were cysteine, glycine, arginine, and lysine, suggesting that it is a basic one. The NH2-terminal 34 amino acids were found to be as follows: Asn-Leu-Val-Asn-Phe-His-Arg-Met-Ile-Lys-Leu-Thr-Thr-Gly-Lys-Glu-Ala-Ala-Leu- Ser-Tyr-Gly-Phe-Tyr-Gly-Cys-X-Cys-Gly-Val-Gly-Gly-Arg-Gly The enzyme contains Phe-5, Met-8, Ile-9, Tyr-24, Gly-25, Cys-26, Cys-28, Gly-29, Gly-31, Gly-32, and Gly-34 residues, all of which are conserved in most of the sequenced phospholipase A2. The remarkable feature of this enzyme was the absence of Cys-11, which is conserved in the "Group I" enzyme family. This is the first report concerning partial amino acid sequences of human non-pancreatic phospholipase A2.     

The refined structure of vitamin D-dependent calcium-binding protein from bovine intestine. Molecular details, ion binding, and implications for the structure of other calcium-binding proteins

The structure of bovine intestinal calcium-binding protein (ICaBP) has been determined crystallographically at a resolution of 2.3 A and refined by a least squares technique to an R factor of 17.8%. The refined structure includes all 600 non-hydrogen protein atoms, two bound calcium ions, and solvent consisting of one sulfate ion and 36 water molecules. The molecule consists of two helix-loop-helix calcium-binding domains known as EF hands, connected by a linker containing a single turn of helix. Helix-helix interactions are primarily hydrophobic, but also include a few strategic hydrogen bonds. Most of the hydrogen bonds, however, are found in the calcium-binding loops, where they occur both within a single loop and between the two. Examination of the hydrogen bonding patterns in the calcium-binding loops of ICaBP and the related protein, parvalbumin, reveals several conserved hydrogen bonds which are evidently important for loop stabilization. The primary and tertiary structural features which promote the formation of an EF hand were originally identified from the structure of parvalbumin. They are modified in light of the ICaBP structure and considered as they apply to other calcium-binding proteins. The C-terminal domain of ICaBP is a normal EF hand, with ion binding properties similar to those of the calmodulin hands, but the N-terminal domain is a variant hand whose calcium ligands are mostly peptide carbonyls. Relative to a normal EF hand, this domain exhibits a similar KD for calcium binding but a greatly reduced affinity for calcium analogs such as cadmium and the lanthanide series. Lanthanides in particular may be inappropriate models for calcium in this system.     

The crystal structure of a lysine 49 phospholipase A2 from the venom of the cottonmouth snake at 2.0-A resolution

The crystal structure of a lysine 49 variant phospholipase A2 (K49 PLA2) has been determined at 2.0-A resolution. This particular phospholipase A2, purified from the venom of the eastern cottonmouth (Agkistrodon piscivorus piscivorus), a North American pit viper, differs significantly from others studied crystallographically because of replacement of the aspartate residue at position 49, whose side chain is important in calcium binding, by lysine. The crystallographic analysis of K49 PLA2 was undertaken to assess the structural ramifications of this substitution, particularly as they affect the binding mechanism of both the calcium cofactor and the phospholipid substrate. The protein crystals are tetragonal, space group P4(1)2(1)2, with unit cell dimensions of a = b = 71.7 (1) and c = 57.8 (3) A. Preliminary phases were obtained by molecular replacement techniques with a search model derived from the refined 2.5-A structure of a rattle-snake venom phospholipase A2 (Brunie, S., Bolin, J., Gewirth, D., and Sigler, P. B. (1985) J. Biol. Chem. 260, 9742-9749). The starting model gave an initial crystallographic RF of 0.526 (RF = sigma parallel to Fo /-/ Fc parallel to /sigma/Fo/). The structure was refined against all data to 2.0-A resolution. The final RF is 0.158. The final model includes 150 discrete water molecules. The K49 PLA2 model is composed primarily of alpha-helices joined by loops, some of which are quite extensive. Although dissimilarities are observed in the loop regions, the helical portions are very similar to those in other known phospholipase A2 structures. The proposed catalytic center (His48, Tyr73, and Asp99) is also structurally conserved. The region in K49 PLA2 corresponding to the calcium-binding site in other phospholipases A2 is occupied by the epsilon-amino group of lysine 49.