Characterization of strand exchange activity of yeast Rad51 protein.

The Saccharomyces cerevisiae RAD51 gene product takes part in genetic recombination and repair of DNA double strand breaks. Rad51, like Escherichia coli RecA, catalyzes strand exchange between homologous circular single-stranded DNA (ssDNA) and linear double-stranded DNA (dsDNA) in the presence of ATP and ssDNA-binding protein. The formation of joint molecules between circular ssDNA and linear dsDNA is initiated at either the 5' or the 3' overhanging end of the complementary strand; joint molecules are formed only if the length of the overhanging end is more than 1 nucleotide. Linear dsDNAs with recessed complementary or blunt ends are not utilized. The polarity of strand exchange depends upon which end is used to initiate the formation of joint molecules. Joint molecules formed via the 5' end are processed by branch migration in the 3'-to-5' direction with respect to ssDNA, and joint molecules formed with a 3' end are processed in the opposite direction.     

Changes in the tension in dsDNA alter the conformation of RecA bound to dsDNA�CRecA filaments

The RecA protein is an ATPase that mediates recombination via strand exchange. In strand exchange a single-stranded DNA (ssDNA) bound to RecA binding site I in a RecA/ssDNA filament pairs with one strand of a double-stranded DNA (dsDNA) and forms heteroduplex dsDNA in site I if homology is encountered. Long sequences are exchanged in a dynamic process in which initially unbound dsDNA binds to the leading end of a RecA/ssDNA filament, while heteroduplex dsDNA unbinds from the lagging end via ATP hydrolysis. ATP hydrolysis is required to convert the active RecA conformation, which cannot unbind, to the inactive conformation, which can unbind. If dsDNA extension due to RecA binding increases the dsDNA tension, then RecA unbinding must decrease tension. We show that in the presence of ATP hydrolysis decreases in tension induce decreases in length whereas in the absence of hydrolysis, changes in tension have no systematic effect. These results suggest that decreases in force enhance dissociation by promoting transitions from the active to the inactive RecA conformation. In contrast, increases in tension reduce dissociation. Thus, the changes in tension inherent to strand exchange may couple with ATP hydrolysis to increase the directionality and stringency of strand exchange.     

The preference for a 3' homologous end is intrinsic to RecA-promoted strand exchange

The recA protein (RecA) promotes DNA pairing and strand exchange optimally in the presence of single-stranded binding protein (SSB). Under these conditions, 3' homologous ends are essential for stable joint molecule formation between linear single-stranded DNA (ssDNA) and supercoiled DNA (i.e. 3' ends are 50-60 times more reactive than 5' ends). Linear ssDNAs with homology at the 5' end do not participate in pairing. In the absence of SSB, the strand exchange reaction is less efficient; however, linear ssDNAs with 3' end homology are still 5- to 10-fold more reactive than those with 5' end homology. The preference for a 3' homologous end in the absence of SSB suggests that this is an intrinsic property of RecA-promoted strand exchange. The preferential reactivity of 3' homologous ends is likely to be a consequence of the polarity of polymerization of RecA on ssDNA. Specifically, since RecA polymerizes in the 5'----3' direction, 3' ends are more likely to be coated with RecA and, hence, will be more reactive than 5' ends.     

The function of the secondary DNA-binding site of RecA protein during DNA strand exchange.

RecA protein features two distinct DNA-binding sites. During DNA strand exchange, the primary site binds to single-stranded DNA (ssDNA), forming the helical RecA nucleoprotein filament. The weaker secondary site binds double-stranded DNA (dsDNA) during the homology search process. Here we demonstrate that this site has a second important function. It binds the ssDNA strand that is displaced from homologous duplex DNA during DNA strand exchange, stabilizing the initial heteroduplex DNA product. Although the high affinity of the secondary site for ssDNA is essential for DNA strand exchange, it renders DNA strand exchange sensitive to an excess of ssDNA which competes with dsDNA for binding. We further demonstrate that single-stranded DNA-binding protein can sequester ssDNA, preventing its binding to the secondary site and thereby assisting at two levels: it averts the inhibition caused by an excess of ssDNA and prevents the reversal of DNA strand exchange by removing the displaced strand from the secondary site.     

Rad51 uses one mechanism to drive DNA strand exchange in both directions

The Rad51 protein of Saccharomyces cerevisiae, like its bacterial counterpart RecA, promotes strand exchange between circular single-stranded DNA (ssDNA) and linear double-stranded DNA (dsDNA) in vitro. However, the two proteins differ in the requirement for initiating joint molecules and in the polarity of branch migration. Whereas RecA initiates joint molecules from any type of ends on the dsDNA and branch migration proceeds exclusively in the 5'- to 3'-direction with respect to the single strand DNA substrate, initiation mediated by Rad51 requires a complementary 3' or 5' overhanging end of the linear dsDNA and branch migration proceeds in either direction. Here we report that the rates of Rad51-mediated branch migration in either the 5'- to 3'- or 3'- to 5'-directions are affected to the same extent by temperature and MgCl(2). Furthermore, branch migration in both directions is equally impeded by insertions of non-homologous sequences in the dsDNA, inserts of 6 base pairs or more being completely inhibitory. We have also found that the preference of strand exchange in the 5'- to 3'-direction does not change if RPA is replaced by Escherichia coli SSB or T4 gene 32 proteins, suggesting that the preference for the direction of strand exchange is intrinsic to Rad51. Based on these results, we conclude that Rad51-promoted branch migration in either direction occurs fundamentally by the same mechanism, quite probably by stabilizing successively formed heteroduplex base pair.     

Three-strand exchange by the Escherichia coli RecA protein using ITP as a nucleotide cofactor: mechanistic parallels with the ATP-dependent reaction of the RecA protein from Streptococcus pneumoniae

The RecA protein from Escherichia coli promotes an ATP-dependent three-strand exchange reaction between a circular single-stranded DNA (ssDNA) and a homologous linear double-stranded (dsDNA). We have now found that under certain conditions, the RecA protein is also able to promote the three-strand exchange reaction using the structurally related nucleoside triphosphate, ITP, as the nucleotide cofactor. However, although both reactions are stimulated by single-stranded DNA-binding (SSB) protein, the ITP-dependent reaction differs from the ATP-dependent reaction in that it is observed only at low SSB protein concentrations, whereas the ATP-dependent reaction proceeds efficiently even at high SSB protein concentrations. Moreover, the circular ssDNA-dependent ITP hydrolysis activity of the RecA protein is strongly inhibited by SSB protein (suggesting that SSB protein displaces RecA protein from ssDNA when ITP is present), whereas the ATP hydrolysis activity is uninhibited even at high SSB protein concentrations (because RecA protein is resistant to displacement by SSB protein when ATP is present). These results suggest that SSB protein does not stimulate the ITP-dependent strand exchange reaction presynaptically (by facilitating the binding of RecA protein to the circular ssDNA substrate) but may act postsynaptically (by binding to the displaced strand that is generated when the circular ssDNA invades the linear dsDNA substrate). Interestingly, the mechanistic characteristics of the ITP-dependent strand exchange reaction of the E. coli RecA protein are similar to those of the ATP-dependent strand exchange reaction of the RecA protein from Streptococcus pneumoniae. These findings are discussed in terms of the relationship between the dynamic state of the RecA-ssDNA filament and the mechanism of the SSB protein-stimulated three-strand exchange reaction.     

Complementary strand relocation may play vital roles in RecA-based homology recognition

RecA-family proteins mediate homologous recombination and recombinational DNA repair through homology search and strand exchange. Initially, the protein forms a filament with the incoming single-stranded DNA (ssDNA) bound in site I. The RecA–ssDNA filament then binds double-stranded DNA (dsDNA) in site II. Non-homologous dsDNA rapidly unbinds, whereas homologous dsDNA undergoes strand exchange yielding heteroduplex dsDNA in site I and the leftover outgoing strand in site II. We show that applying force to the ends of the complementary strand significantly retards strand exchange, whereas applying the same force to the outgoing strand does not. We also show that crystallographically determined binding site locations require an intermediate structure in addition to the initial and final structures. Furthermore, we demonstrate that the characteristic dsDNA extension rates due to strand exchange and free RecA binding are the same, suggesting that relocation of the complementary strand from its position in the intermediate structure to its position in the final structure limits both rates. Finally, we propose that homology recognition is governed by transitions to and from the intermediate structure, where the transitions depend on differential extension in the dsDNA. This differential extension drives strand exchange forward for homologs and increases the free energy penalty for strand exchange of non-homologs.     

Complete inhibition of Streptococcus pneumoniae RecA protein-catalyzed ATP hydrolysis by single-stranded DNA-binding protein (SSB protein): implications for the mechanism of SSB protein-stimulated DNA strand exchange

The ATP-dependent three-strand exchange activity of the Streptococcus pneumoniae RecA protein (RecA(Sp)), like that of the Escherichia coli RecA protein (RecA(Ec)), is strongly stimulated by the single-stranded DNA-binding protein (SSB) from either E. coli (SSB(Ec)) or S. pneumoniae (SSB(Sp)). The RecA(Sp) protein differs from the RecA(Ec) protein, however, in that its ssDNA-dependent ATP hydrolysis activity is completely inhibited by SSB(Ec) or SSB(Sp) protein, apparently because these proteins displace RecA(Sp) protein from ssDNA. These results indicate that in contrast to the mechanism that has been established for the RecA(Ec) protein, SSB protein does not stimulate the RecA(Sp) protein-promoted strand exchange reaction by facilitating the formation of a presynaptic complex between the RecA(Sp) protein and the ssDNA substrate. In addition to acting presynaptically, however, it has been proposed that SSB(Ec) protein also stimulates the RecA(Ec) protein strand exchange reaction postsynaptically, by binding to the displaced single strand that is generated when the ssDNA substrate invades the homologous linear dsDNA. In the RecA(Sp) protein-promoted reaction, the stimulatory effect of SSB protein may be due entirely to this postsynaptic mechanism. The competing displacement of RecA(Sp) protein from the ssDNA substrate by SSB protein, however, appears to limit the efficiency of the strand exchange reaction (especially at high SSB protein concentrations or when SSB protein is added to the ssDNA before RecA(Sp) protein) relative to that observed under the same conditions with the RecA(Ec) protein.     

RecA Protein from the extremely radioresistant bacterium Deinococcus radiodurans: expression, purification, and characterization

The RecA protein of Deinococcus radiodurans (RecA(Dr)) is essential for the extreme radiation resistance of this organism. The RecA(Dr) protein has been cloned and expressed in Escherichia coli and purified from this host. In some respects, the RecA(Dr) protein and the E. coli RecA (RecA(Ec)) proteins are close functional homologues. RecA(Dr) forms filaments on single-stranded DNA (ssDNA) that are similar to those formed by the RecA(Ec). The RecA(Dr) protein hydrolyzes ATP and dATP and promotes DNA strand exchange reactions. DNA strand exchange is greatly facilitated by the E. coli SSB protein. As is the case with the E. coli RecA protein, the use of dATP as a cofactor permits more facile displacement of bound SSB protein from ssDNA. However, there are important differences as well. The RecA(Dr) protein promotes ATP- and dATP-dependent reactions with distinctly different pH profiles. Although dATP is hydrolyzed at approximately the same rate at pHs 7.5 and 8.1, dATP supports an efficient DNA strand exchange only at pH 8.1. At both pHs, ATP supports efficient DNA strand exchange through heterologous insertions but dATP does not. Thus, dATP enhances the binding of RecA(Dr) protein to ssDNA and the displacement of ssDNA binding protein, but the hydrolysis of dATP is poorly coupled to DNA strand exchange. The RecA(Dr) protein thus may offer new insights into the role of ATP hydrolysis in the DNA strand exchange reactions promoted by the bacterial RecA proteins. In addition, the RecA(Dr) protein binds much better to duplex DNA than the RecA(Ec) protein, binding preferentially to double-stranded DNA (dsDNA) even when ssDNA is present in the solutions. This may be of significance in the pathways for dsDNA break repair in Deinococcus.     

The direction of RecA protein assembly onto single strand DNA is the same as the direction of strand assimilation during strand exchange

The RecA protein of Escherichia coli optimally promotes DNA strand exchange reactions in the presence of the single strand DNA-binding protein of E. coli (SSB protein). Under these conditions, assembly of RecA protein onto single-stranded DNA (ssDNA) occurs in three steps. First, the ssDNA is rapidly covered by SSB protein. The binding of RecA protein is then initiated by nucleation of a short tract of RecA protein onto the ssDNA. Finally, cooperative polymerization of additional RecA protein accompanied by displacement of SSB protein results in a ssDNA-RecA protein filament (Griffith, J. D., Harris, L. D., and Register, J. C. (1984) Cold Spring Harbor Symp. Quant. Biol. 49, 553-559). We report here that RecA protein assembly onto circular ssDNA yields RecA protein-covered circles in which greater than 85% are completely covered by RecA protein with no remaining SSB protein-covered segments (as detected by electron microscopy). However, when linear ssDNA is used, 90% of the filaments contain a short segment at one end complexed with SSB protein. This suggests that RecA protein assembly is unidirectional. Visualization of the assembly of RecA protein onto either long ssDNA tails (containing either 5' or 3' termini) or ssDNA gaps generated in double strand DNA allowed us to determine that the RecA protein polymerizes in the 5' to 3' direction on ssDNA and preferentially nucleates at ssDNA-double strand DNA junctions containing 5' termini.     

Hyper-recombinogenic RecA protein from Pseudomonas aeruginosa with enhanced activity of its primary DNA binding site

According to one prominent model, each protomer in the activated nucleoprotein filament of homologous recombinase RecA possesses two DNA-binding sites. The primary site binds (1) single-stranded DNA (ssDNA) to form presynaptic complex and (2) the newly formed double-stranded (ds) DNA whereas the secondary site binds (1) dsDNA of a partner to initiate strand exchange and (2) the displaced ssDNA following the strand exchange. RecA protein from Pseudomonas aeruginosa (RecAPa) promotes in Escherichia coli hyper-recombination in an SOS-independent manner. Earlier we revealed that RecAPa rapidly displaces E.coli SSB protein (SSB-Ec) from ssDNA to form presynaptic complex. Here we show that this property (1) is based on increased affinity of ssDNA for the RecAPa primary DNA binding site while the affinity for the secondary site remains similar to that for E.coli RecA, (2) is not specific for SSB-Ec but is also observed for SSB protein from P.aeruginosa that, in turn, predicts a possibility of enhanced recombination repair in this pathogenic bacterium.     

The human Rad51 protein: polarity of strand transfer and stimulation by hRP-A.

The human Rad51 protein is homologous to the RecA protein and catalyses homologous pairing and strand transfer reactions in vitro. Using single-stranded circular and homologous linear duplex DNA, we show that hRad51 forms stable joint molecules by transfer of the 5' end of the complementary strand of the linear duplex to the ssDNA. The polarity of strand transfer is therefore 3' to 5', defined relative to the ssDNA on which hRad51 initiates filament formation. This polarity is opposite to that observed with RecA. Homologous pairing and strand transfer require stoichiometric amounts of hRad51, corresponding to one hRad51 monomer per three nucleotides of ssDNA. Joint molecules are not observed when the protein is present in limiting or excessive amounts. The human ssDNA binding-protein, hRP-A, stimulates hRad51-mediated reactions. Its effect is consistent with a role in the removal of secondary structures from ssDNA, thereby facilitating the formation of continuous Rad51 filaments.     

Real-time observation of strand exchange reaction with high spatiotemporal resolution

RecA binds to single-stranded (ss) DNA to form?a helical filament that catalyzes strand exchange with a homologous double-stranded (ds) DNA. The study of strand exchange in ensemble assays is limited by the diffusion limited homology search process, which masks the subsequent strand exchange reaction. We developed a single-molecule fluorescence assay with a few base-pair and millisecond resolution that can separate initial docking from the subsequent propagation of joint molecule formation. Our data suggest that propagation occurs in 3?bp increments with destabilization of the incoming dsDNA and concomitant pairing with the reference ssDNA. Unexpectedly, we discovered the formation of?a dynamic complex between RecA and the displaced DNA that remains bound transiently after joint molecule formation. This finding could have important implications for the irreversibility of strand exchange. Our model for strand exchange links structural models of RecA to its catalytic function.     

Energetics of RecA-mediated recombination reactions. Without ATP hydrolysis RecA can mediate polar strand exchange but is unable to recycle

We demonstrate that the step of DNA strand exchange during RecA-mediated recombination reaction can occur equally efficiently in the presence or absence of ATP hydrolysis. The polarity of strand exchange is the same when instead of ATP its non-hydrolyzable analog adenosine-5'-O-(3-thiotriphosphate) is used. We show that the ATP dependence of recombination reaction is limited to the post-exchange stages of the reactions. The low DNA affinity state of RecA protomers, induced after ATP hydrolysis, is necessary for the dissociation of RecA-DNA complexes at the end of the reaction. This dissociation of RecA from DNA is necessary for the release of recombinant DNA molecules from the complexes formed with RecA and for the recycling of RecA protomers for another round of the recombination reaction.     

RecA protein-promoted homologous pairing and strand exchange between intact and partially single-stranded duplex DNA.

In the pairing reaction between circular gapped and fully duplex DNA, RecA protein first polymerizes on the gapped DNA to form a nucleoprotein filament. Conditions that removed the formation of secondary structure in the gapped DNA, such as addition of Escherichia coli single-stranded DNA binding protein or preincubation in 1 mM-MgCl2, optimized the binding of RecA protein and increased the formation of joint molecules. The gapped duplex formed stable joints with fully duplex DNA that had a 5' or 3' terminus complementary to the single-stranded region of the gapped molecule. However, the joints formed had distinct properties and structures depending on whether the complementary terminus was at the 5' or 3' end. Pairing between gapped DNA and fully duplex linear DNA with a 3' complementary terminus resulted in strand displacement, symmetric strand exchange and formation of complete strand exchange products. By contrast, pairing between gapped and fully duplex DNA with a 5' complementary terminus produced a joint that was restricted to the gapped region; there was no strand displacement or symmetric strand exchange. The joint formed in the latter reaction was likely a three-stranded intermediate rather than a heteroduplex with the classical Watson-Crick structure. We conclude that, as in the three-strand reaction, the process of strand exchange in the four-strand reaction is polar and progresses in a 5' to 3' direction with respect to the initiating strand. The present study provides further evidence that in both three-strand and four-strand systems the pairing and strand exchange reactions share a common mechanism.     

The efficiency of strand invasion by Escherichia coli RecA is dependent upon the length and polarity of ssDNA tails

RecA protein is essential for homologous recombination and the repair of DNA double-strand breaks in Escherichia coli. The protein binds DNA to form nucleoprotein filaments that promote joint molecule formation and strand exchange in vitro. RecA polymerises on ssDNA in the 5'-3' direction and catalyses strand exchange and branch migration with a 5'-3' polarity. It has been reported previously, using D-loop assays, in which ssDNA (containing a heterologous block at one end) invades supercoiled duplex DNA that 3'-homologous ends are reactive, whereas 5'-ends are inactive. This polarity bias was thought to be due to the polarity of RecA filament formation, which results in the 3'-ends being coated in RecA, whereas 5'-ends remain naked. Using a range of duplex substrates containing ssDNA tails of various lengths and polarities, we now demonstrate that when no heterologous block is imposed, 5'-ends are just as reactive as 3'-ends. Moreover, using short-tailed substrates, we find that 5'-ends form more stable D-loops than 3'-ends. This bias may be a consequence of the instability of short 3'-joints. With more physiological substrates containing long ssDNA tails, we find that RecA shows no intrinsic preference for 5' or 3'-ends and that both form D-loop complexes with high efficiency.     

Electron microscopic visualization of the RecA protein-mediated pairing and branch migration phases of DNA strand exchange

The RecA protein of Escherichia coli will drive the pairing and exchange of strands between homologous DNA molecules in a reaction stimulated by single-stranded binding protein. Here, reactions utilizing three homologous DNA pairs which can undergo both paranemic and plectonemic joining were examined by electron microscopy: supertwisted double-stranded (ds) DNA and linear single-stranded (ss) DNA, linear dsDNA and circular ssDNA, and linear dsDNA and colinear ssDNA. Several major observations were: (i) with RecA protein bound to the DNA, plectonemic joints were ultrastructurally indistinguishable from paranemic joints; (ii) complexes which appeared to be joined both paranemically and plectonemically were present in these reactions in roughly equal numbers; and (iii) in complexes undergoing strand exchange, both DNA partners were often enveloped within a RecA protein filament consisting of hundreds of RecA protein monomers and several kilobases of DNA. These observations suggest that, following RecA protein-ssDNA filament formation, strand exchange proceeds by a pathway that can be divided structurally into three phases: pairing, envelopment/exchange, and release of the products.     

ADP-dependent DNA strand exchange by the mutant [P67G/E68A] RecA protein

We have prepared a mutant RecA protein in which proline 67 and glutamic acid 68 in the NTP binding site were replaced by a glycine and alanine residue, respectively. The [P67G/E68A]RecA protein catalyzes the single-stranded DNA-dependent hydrolysis of ATP and is able to promote the standard ATP-dependent three-strand exchange reaction between a circular bacteriophage phiX174 (phiX) single-stranded DNA molecule and a homologous linear phiX double-stranded (ds) DNA molecule (5.4 kilobase pairs). The strand exchange activity differs from that of the wild type RecA protein, however, in that it is (i) completely inhibited by an ATP regeneration system, and (ii) strongly stimulated by the addition of high concentrations of ADP to the reaction solution. These results indicate that the strand exchange activity of the [P67G/E68A]RecA protein is dependent on the presence of both ATP and ADP. The ADP dependence of the reaction is reduced or eliminated when (i) a shorter linear phiX dsDNA fragment (1.1 kilobase pairs) is substituted for the full-length linear phiX dsDNA substrate, or (ii) the Mg(2+) concentration is reduced to a level just sufficient to complex the ATP present in the reaction solution. These results indicate that it is the branch migration phase (and not the initial pairing step) of the [P67G/E68A]RecA protein-promoted strand exchange reaction that is dependent on ADP. It is likely that the [P67G/E68A]RecA mutation has revealed a requirement for ADP that also exists (but is not as readily apparent) in the strand exchange reaction of the wild type RecA protein.     

Single-molecule studies of the stringency factors and rates governing the polymerization of RecA on double-stranded DNA

RecA is a key protein in homologous recombination. During recombination, one single-stranded DNA (ssDNA) bound to site I in RecA exchanges Watson-Crick pairing with a sequence-matched ssDNA that was part of a double-stranded DNA molecule (dsDNA) bound to site II in RecA. After strand exchange, heteroduplex dsDNA is bound to site I. In vivo, direct polymerization of RecA on dsDNA through site I does not occur, though it does in vitro. The mechanisms underlying the difference have been unclear. We use single-molecule experiments to decouple the two steps involved in polymerization: nucleation and elongation. We find that elongation is governed by a fundamental clock that is insensitive to force and RecA concentration from 0.2 and 6 μM, though rates depend on ionic conditions. Thus, we can probe nucleation site stability by creating nucleation sites at high force and then measuring elongation as a function of applied force. We find that in the presence of ATP hydrolysis a minimum force is required for polymerization. The minimum force decreases with increasing RecA or ATP concentrations. We propose that force reduces the off-rate for nucleation site binding and that nucleation site stability is the stringency factor that prevents in vivo polymerization.     

The effects on strand exchange of 5' versus 3' ends of single-stranded DNA in RecA nucleoprotein filaments

Since the ends of DNA chains are thought to be important in homologous recombination, the way in which RecA protein and similar recombination enzymes process ends is important. We analyzed the effects of ends both on the formation of joints, and the progression of strand exchange. When the only homologous end was provided by a single strand, there was no significant difference between the formation of joints at a 5' end or a 3' end; but in agreement with the report of Konforti & Davis, Escherichia coli single-stranded DNA binding protein (SSB) selectively inhibited the activity of 5' ends. Complete strand exchange, assessed by study of linear single-stranded and double-stranded substrates, took place only in the 5' to 3' direction relative to DNA in the nucleoprotein filament. These observations pose a paradox: in the presence of SSB, of which there are about 800 tetramers per cell, the formation of homologous joints by RecA protein is favored at a 3' end, from which, however, authentic strand exchange appears not to occur. Since observations reported here and elsewhere show that joints have different properties when formed at a 5' versus a 3' end, we suggest that they may be processed differently in vivo.