The structure of the membrane-binding 38 C-terminal residues from bovine PP3 determined by liquid- and solid-state NMR spectroscopy.

The secondary structure and membrane-associated conformation of a synthetic peptide corresponding to the putative membrane-binding C-terminal 38 residues of the bovine milk component PP3 was determined using 1H NMR in methanol, CD in methanol and SDS micelles, and 15N solid-state NMR in planar phospholipid bilayers. The solution NMR and CD spectra reveal that the PP3 peptide in methanol and SDS predominantly adopts an alpha-helical conformation extending over its entire length with a potential bend around residue 19. 15N solid-state NMR of two PP3 peptides 15N-labelled at the Gly7 and Ala32 positions, respectively, and dissolved in dimyristoylphosphatidylcholine/dimyristoylphosphatidylglycerol phospholipid bilayers shows that the peptide is associated to the membrane surface with the amphipathic helix axis oriented parallel to the bilayer surface.     

Origin of low mammalian cell toxicity in a class of highly active antimicrobial amphipathic helical peptides

We recently described a novel antimicrobial peptide, RTA3, derived from the commensal organism Streptococcus mitis, with strong anti-Gram-negative activity, low salt sensitivity, and minimal mammalian cell toxicity in vitro and in vivo. This peptide conforms to the positively charged, amphipathic helical peptide motif, but has a positively charged amino acid (Arg-5) on the nonpolar face of the helical structure that is induced upon membrane binding. We surmised that disruption of the hydrophobic face with a positively charged residue plays a role in minimizing eukaryotic cell toxicity, and we tested this using a mutant with an R5L substitution. The greatly enhanced toxicity in the mutant peptide correlated with its ability to bind and adopt helical conformations upon interacting with neutral membranes; the wild type peptide RTA3 did not bind to neutral membranes (binding constant reduced by at least 1000-fold). Spectroscopic analysis indicates that disruption of the hydrophobic face of the parent peptide is accommodated in negatively charged membranes without partial peptide unfolding. These observations apply generally to amphipathic helical peptides of this class as we obtained similar results with a peptide and mutant pair (Chen, Y., Mant, C. T., Farmer, S. W., Hancock, R. E., Vasil, M. L., and Hodges, R. S. (2005) J. Biol. Chem. 280, 12316-12329) having similar structural properties. In contrast to previous interpretations, we demonstrate that these peptides simply do not bind well to membranes (like those of eukaryotes) with exclusively neutral lipids in their external bilayer leaflet. We highlight a significant role for tryptophan in promoting binding of amphipathic helical peptides to neutral bilayers, augmenting the arsenal of strategies to reduce mammalian toxicity in antimicrobial peptides.     

Removal of clustered positive charge from dihydropyridine receptor II-III loop peptide augments activation of ryanodine receptors

Peptides based on the skeletal muscle DHPR II-III loop have been shown to regulate ryanodine receptor channel activity. The N-terminal region of this cytoplasmic loop is predicted to adopt an alpha-helical conformation. We have selected a peptide sequence of 26 residues (Ala(667)-Asp(692)) as the minimum sequence to emulate the helical propensity of the corresponding protein sequence. The interaction of this control peptide with skeletal and cardiac RyR channels in planar lipid bilayers was then assessed and was found to lack isoform specificity. At low concentrations peptide A(667)-D(692) increased RyR open probability, whilst at higher concentrations open probability was reduced. By replacing a region of clustered positive charge with a neutral sequence with the same predisposition to helicity, the inhibitory effect was ablated and activation was enhanced. This novel finding demonstrates that activation does not derive from the presence of positively charged residues adjacent in the primary structure and, although it may be mediated by the alignment of basic residues down one face of an amphipathic helix, not all of these residues are essential.     

Peptide binding to lipid bilayers. Binding isotherms and zeta-potential of a cyclic somatostatin analogue

The binding of the cyclic somatostatin analogue SMS 201-995, (+)-D-Phe1-Cys2-Phe3-D-Trp4-(+)-Lys5-Thr6- Cys7-Thr(ol)8, to neutral and negatively charged lipids was investigated with a centrifugation assay and with electrophoretic and monolayer methods. Monolayers and bilayers were composed of 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC) and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol (POPG), either in pure form or in a 75/25 (mol/mol) mixture. The expansion of monolayer films demonstrated the intercalation of the peptide between the lipid molecules with a surface area requirement of 135 A2 per peptide molecule, indicating a parallel alignment of the peptide long axis with the membrane surface. Above a limiting pressure of 32.5 mN/m for POPC and 38.5 mN/m for POPG, peptide penetration was no longer possible. The peptide binding isotherm could be measured for mixed POPC/POPG bilayers up to a peptide concentration of 0.5 mM. Due to electrostatic attraction, binding between the positively charged peptide and the negatively charged membrane surface was enhanced as compared to the binding to a neutral membrane. After correction for electrostatic effects by means of the Gouy-Chapman theory, the binding isotherm as well as the electrophoretic zeta-potential measurement could be described by the same partition equilibrium with a surface partition constant of Kp = 36 +/- 4 M-1 (at 0.1 M NaCl). About 60-70% of SMS 201-995 is probably embedded in the headgroup region with little penetration into the lipid core. The partition constant increases with increasing salt concentration or with decreasing lipid lateral pressure.(ABSTRACT TRUNCATED AT 250 WORDS)     

Structure and membrane orientation of IAPP in its natively amidated form at physiological pH in a membrane environment

Human islet amyloid polypeptide is a hormone coexpressed with insulin by pancreatic beta-cells. For reasons not clearly understood, hIAPP aggregates in type II diabetics to form oligomers that interfere with beta-cell function, eventually leading to the loss of insulin production. The cellular membrane catalyzes the formation of amyloid deposits and is a target of amyloid toxicity through disruption of the membrane's structural integrity. Therefore, there is considerable current interest in solving the 3D structure of this peptide in a membrane environment. NMR experiments could not be directly utilized in lipid bilayers due to the rapid aggregation of the peptide. To overcome this difficulty, we have solved the structure of the naturally occurring peptide in detergent micelles at a neutral pH. The structure has an overall kinked helix motif, with residues 7-17 and 21-28 in a helical conformation, and with a 3(10) helix from Gly 33-Asn 35. In addition, the angle between the N- and C-terminal helices is constrained to 85°. The greater helical content of human IAPP in the amidated versus free acid form is likely to play a role in its aggregation and membrane disruptive activity.     

Membrane surface charge modulates lipoprotein complex forming capability of peptides derived from the C-terminal domain of apolipoprotein E

Apolipoprotein E (apoE) plays a major role in the transport and metabolism of lipid by acting as a ligand for low density lipoprotein-receptors. The amphipathic helical regions of its C-terminal domain are necessary for the lipoprotein binding and assembly of nascent lipoprotein particles. Lipoproteins in the plasma are known to possess a net negative charge, determined by both its protein and lipid components, which regulates the metabolism of lipoproteins. The role of membrane surface charge on the interaction of apoE has not been studied previously. Also the importance of individual amphipathic helical regions of its C-terminal domain in binding to negatively charged lipid membrane is not addressed. In this study we have compared the interaction of four peptide segments of apoE C-terminal domain (apoE_(202-223), apoE_(223-244), apoE_(245-266), and apoE_(268-289)) with zwitterionic and negatively charged model membranes by employing UV-visible and fluorescence spectroscopy, circular dichroism, and native PAGE analysis. Our results show that the peptide sequence 202-223, 245-266 and 268-289 of apoE has higher affinity towards negatively charged lipid membrane and are independently capable of forming lipoprotein particles of 17 ± 2 nm Stokes diameter. The results suggest that surface charge of lipoprotein regulates its metabolism possibly by modulating the recruitment of apoE on its surface.     

Membrane topology of a 14-mer model amphipathic peptide: a solid-state NMR spectroscopy study

We have investigated the interaction between a synthetic amphipathic 14-mer peptide and model membranes by solid-state NMR. The 14-mer peptide is composed of leucines and phenylalanines modified by the addition of crown ethers and forms a helical amphipathic structure in solution and bound to lipid membranes. To shed light on its membrane topology, 31P, 2H, 15N solid-state NMR experiments have been performed on the 14-mer peptide in interaction with mechanically oriented bilayers of dilauroylphosphatidylcholine (DLPC), dimyristoylphosphatidylcholine (DMPC), and dipalmitoylphosphatidylcholine (DPPC). The 31P, 2H, and 15N NMR results indicate that the 14-mer peptide remains at the surface of the DLPC, DMPC, and DPPC bilayers stacked between glass plates and perturbs the lipid orientation relative to the magnetic field direction. Its membrane topology is similar in DLPC and DMPC bilayers, whereas the peptide seems to be more deeply inserted in DPPC bilayers, as revealed by the greater orientational and motional disorder of the DPPC lipid headgroup and acyl chains. 15N{31P} rotational echo double resonance experiments have also been used to measure the intermolecular dipole-dipole interaction between the 14-mer peptide and the phospholipid headgroup of DMPC multilamellar vesicles, and the results indicate that the 14-mer peptide is in contact with the polar region of the DMPC lipids. On the basis of these studies, the mechanism of membrane perturbation of the 14-mer peptide is associated to the induction of a positive curvature strain induced by the peptide lying on the bilayer surface and seems to be independent of the bilayer hydrophobic thickness.     

Membrane-bound dimer structure of a beta-hairpin antimicrobial peptide from rotational-echo double-resonance solid-state NMR

The intermolecular packing of a beta-hairpin antimicrobial peptide, PG-1, in lipid bilayers is determined using solid-state NMR distance measurements. Previous spin counting experiments showed that PG-1 associates as dimers in POPC bilayers; however, the detailed dimer structure was unknown. We have now measured several intermolecular 13C-19F, 1H-13C, and 15N-13C distances in site-specifically labeled PG-1 to constrain the structure of the intermolecular interface. The distances are measured using the rotational-echo double-resonance (REDOR) technique under magic-angle spinning. The results indicate that two PG-1 molecules align in a parallel fashion with the C-terminal strand of the hairpin forming the dimer interface. Six hydrogen bonds stabilize this interface, and the Phe12 side chain adopts the g- conformation in the membrane as in solution. The parallel packing of the peptide in the lipid bilayer differs from the antiparallel dimer found in DPC micelles and may be stabilized by its strong amphipathic character, which should facilitate its insertion into the amphipathic lipid bilayer. This study demonstrates the utility of the REDOR NMR technique for the elucidation of the oligomeric structure of membrane proteins.     

Stabilization of helical structure in two 17-residue amphipathic analogues of the C-terminal peptide of cytochrome C

The conformations of two 17-residue peptide analogues derived from the C-terminal sequence of pigeon cytochrome c (native sequence = KAERADLIAYLKQATAK) were examined in aqueous and lipid environments by CD spectroscopy. The two analogues, KKLLKKLIAYLKQATAK (K peptide) and EELLEELIAYLKQATAK (E peptide), were made amphipathic with respect to helical segregation by substituting a 6-residue sequence at the N-terminus of the native peptide. Their structures were compared to the native peptide under aqueous conditions of varying pH and temperature, and in the presence of liposomes composed of phosphatidylcholine and phosphatidylserine in the ratio of 9:1. The results indicated that the native peptide remains unstructured under all the conditions examined even though this region of the native molecule is surface exposed and helical. The E peptide, however, was helical under aqueous conditions at 25 degrees C from pH 2-10 with a maximum helicity at pH 4 (54% helix from analysis of CD data). The ellipticity of the E peptide at pH 4 and 8 was concentration dependent, indicating an aggregation phenomenon. In studies in which the CD spectrum was measured at different temperatures, the E peptide became more helical at lower temperatures at pH 4 but not at pH 8. Upon interaction with a lipid membrane in the form of liposomes, there appeared to be a slight destabilization in the structure of the E peptide. The K peptide in an aqueous environment behaved like the native peptide in that it was structureless at all pHs and temperatures examined. In the presence of liposomes, however, this peptide had a high helical content (75% helix from analysis of CD data). These findings suggest that while stabilization of the helix dipole with negative charges at the N-terminus are important in inducing helical conformation in the E peptide, hydrophobic interactions created during aggregation appear to provide the principal stabilizing force. The results with the K peptide demonstrate that the positive N-terminal sequence of this peptide is able to interact with the negatively charged head groups in the phospholipid membrane in such a fashion as to stabilize a helical structure that is not apparent in an aqueous environment alone.     

How to lose a kink and gain a helix: pH independent conformational changes of the fusion domains from influenza hemagglutinin in heterogeneous lipid bilayers

We have simulated two conformations of the fusion domain of influenza hemagglutinin (HA) within explicit water, salt, and heterogeneous lipid bilayers composed of POPC:POPG (4:1). Each conformation has seven different starting points in which the initial peptide structure is the same for each conformation, but the location across the membrane normal and lipid arrangement around the peptide are varied, giving a combined total simulation time of 140 ns. For the HA5 conformation (primary structure from recent NMR spectroscopy at pH = 5), the peptide exhibits a stable and less kinked structure in the lipid bilayer compared to that from the NMR studies. The relative fusogenic behavior of the different conformations has been investigated by calculation of the relative free energy of insertion into the hydrophobic region of lipid bilayer as a function of the depth of immersion. For the HA7 conformations (primary structure from recent NMR spectroscopy at pH = 7.4), while the N-terminal helix preserves its initial structure, the flexible C-terminal chain produces a transient helical motif inside the lipid bilayer. This conformational change is pH-independent, and is closely related to the peptide insertion into the lipid bilayer.     

Effects of membrane surface charge and calcium on the gating of rat brain sodium channels in planar bilayers [published erratum appears in J Gen Physiol 1989 Apr;93(4):following 760]

The voltage-dependent gating of single, batrachotoxin-activated Na channels from rat brain was studied in planar lipid bilayers composed of negatively charged or neutral phospholipids. The relationship between the probability of finding the Na channel in the open state and the membrane potential (Po vs. Vm) was determined in symmetrical NaCl, both in the absence of free Ca2+ and after the addition of Ca2+ to the extracellular side of the channel, the intracellular side, or both. In the absence of Ca2+, neither the midpoint (V0.5) of the Po vs. Vm relation, nor the steepness of the gating curve, was affected by the charge on the bilayer lipid. The addition of 7.5 mM Ca2+ to the external side caused a depolarizing shift in V0.5. This depolarizing shift was approximately 17 mV in neutral bilayers and approximately 25 mV in negatively charged bilayers. The addition of the same concentration of Ca2+ to only the intracellular side caused hyperpolarizing shifts in V0.5 of approximately 7 mV (neutral bilayers) and approximately 14 mV (negatively charged bilayers). The symmetrical addition of Ca2+ caused a small depolarizing shift in Po vs. Vm. We conclude that: (a) the Na channel protein possesses negatively charged groups on both its inner and outer surfaces. Charges on both surfaces affect channel gating but those on the outer surface exert a stronger influence. (b) Negative surface charges on the membrane phospholipid are close enough to the channel's gating machinery to substantially affect its operation. Charges on the inner and outer surfaces of the membrane lipid affect gating symmetrically. (c) Effects on steady-state Na channel activation are consistent with a simple superposition of contributions to the local electrostatic potential from charges on the channel protein and the membrane lipid.     

Interaction of protegrin-1 with lipid bilayers: membrane thinning effect

Protegrins (PG) are important in defending host tissues, preventing infection via an attack on the membrane surface of invading microorganisms. Protegrins have powerful antibiotic abilities, but the molecular-level mechanisms underlying the interactions of their beta-sheet motifs with the membrane are not known. Protegrin-1 (PG-1) is composed of 18 amino acids with a high content of basic residues and two disulfide bonds. Here we focused on the stability of PG-1 at the amphipathic interface in lipid bilayers and on the details of the peptide-membrane interactions. We simulated all-atom models of the PG-1 monomer with explicit water and lipid bilayers composed of both homogeneous POPC (palmitoyl-oleyl-phosphatidylcholine) lipids and a mixture of POPC/POPG (palmitoyl-oleyl-phosphatidylglycerol) (4:1) lipids. We observed that local thinning of the lipid bilayers mediated by the peptide is enhanced in the lipid bilayer containing POPG, consistent with experimental results of selective membrane targeting. The beta-hairpin motif of PG-1 is conserved in both lipid settings, whereas it is highly bent in aqueous solution. The conformational dynamics of PG-1, especially the highly charged beta-hairpin turn region, are found to be mostly responsible for disturbing the membrane. Even though the eventual membrane disruption requires PG-1 oligomers, our simulations clearly show the first step of the monomeric effects. The thinning effects in the bilayer should relate to pore/channel formation in the lipid bilayer and thus be responsible for further defects in the membrane caused by oligomer.     

Antibacterial peptide pleurocidin forms ion channels in planar lipid bilayers

Pleurocidin, a 25-residue alpha helical cationic peptide, isolated from skin mucous secretions of the winter flounder, displays a strong anti-microbial activity and appears to play a role in innate host defence. This peptide would be responsible for pore formation in the membrane of bacteria leading to lysis and therefore death. In this study, we investigated the behaviour of pleurocidin in different planar lipid bilayers to determine its mechanism of membrane permeabilisation. Macroscopic conductance experiments showed that pleurocidin did not display a pore-forming activity in neutral phosphatidylcholine/phosphatidylethanolamine (PC/PE) lipid bilayers. However, in 7:3:1 PC/PE/phosphatidylserine (PS) lipid bilayers, pleurocidin showed reproducible I/V curves at different peptide concentrations. This activity is confirmed by single-channel experiments since well-defined ion channels were obtained if the lipid mixture was containing an anionic lipid (PS). The ion channel characteristics such as-no voltage dependence, only one unitary conductance, linear relation ship current-voltage-, are not in favour of the membrane permeabilisation according to the barrel model but rather by the toroidal pore formation.     

Phospholipid interactions of synthetic peptides representing the N-terminus of HIV gp41

Peptides representing the N-terminal 23 residues of the surface protein gp41 of LAV1a and LAVmal strains of the human immunodeficiency virus were synthesized and their interactions with phospholipid vesicles studied. The peptides are surface-active and penetrate lipid monolayers composed of negatively charged but not neutral lipids. Similarly, the peptides induce lipid mixing and solute (6-carboxyfluorescein) leakage of negatively charged, but not neutral, vesicles. Circular dichroism and infrared spectroscopy show that at low peptide:lipid ratios (approximately 1:200), the peptides bind to negatively charged vesicles as alpha-helices. At higher peptide:lipid ratios (1:30), a beta conformation is observed for the LAV1a peptide, accompanied by a large increase in light scattering. The LAVmal peptide showed less beta-structure and induced less light scattering. With neutral vesicles, only the beta conformation and a peptide:lipid ratio-dependent increase in vesicle suspension light scattering were observed for both peptides. We hypothesize that the inserted alpha-helical form causes vesicle membrane disruption whereas the surface-bound beta form induces aggregation.     

Structural design and characterization of a channel-forming peptide

A 16-residue polypeptide model with the sequence acetyl-YALSLAATLLKEAASL-OH was derived by rational de novo peptide design. The designed sequence consists of amino acid residues with high propensity to adopt an alpha helical conformation, and sequential order was arranged to produce an amphipathic surface. The designed sequence was chemically synthesized using a solid-phase method and the polypeptide was purified by reverse-phase liquid chromatography. Molecular mass analysis by electro-spray ionization mass spectroscopy confirmed the correct designed sequence. Structural characterization by circular dichroism spectroscopy demonstrated that the peptide adopts the expected alpha helical conformation in 50% acetonitrile solution. Liposome binding assay using Small Unilamellar Vesicle (SUV) showed a marked release of entrapped glucose by interaction between the lipid membrane and the tested peptide. The channel-forming activity of the peptide was revealed by a planar lipid bilayer experiment. An analysis of the conducting current at various applied potentials suggested that the peptide forms a cationic ion channel with an intrinsic conductance of 188 pS. These results demonstrate that a simple rational de novo design can be successfully employed to create short peptides with desired structures and functions.     

The effect of pH on the structure, binding and model membrane lysis by cecropin B and analogs

Cecropins are a group of anti-bacterial, cationic peptides that have an amphipathic N-terminal segment, and a largely hydrophobic C-terminal segment and normally form a helix-hinge-helix structure. In this study, the ability of cecropin B (CB) and two analogs to lyse phospholipid bilayers, which have two levels of anionic content, has been examined by dye-leakage measurements over the pH range 2. 0-12.0. The two analogs differ from the natural peptide by having either two amphipathic segments (CB1) or two hydrophobic segments (CB3). All these peptides (except CB3 on low anionic content bilayers where it is not active) have maximal lytic activity on both types of bilayers at high pH. However, the pattern of secondary structure formation on these bilayers by the peptides, as measured by circular dichroism (CD), and the pattern of their ability to bind lipid monolayers, as measured using a biosensor, do not directly correlate with the pattern of their lytic ability. CB and CB1 with low anionic content bilayers have secondary structures as measured by CD with a similar pattern to membrane lysis, but binding is maximal near neutral, not high, pH. CB3 has some secondary structures on low anionic content bilayers at low pH and this becomes maximal over the basic range, but CB3 neither binds to nor lyses with these lipid layers. On high anionic content lipid layers, all peptides show high levels of secondary structures over most of the pH range and maximal binding at neutral pH (except for CB3, which does not bind). All three peptides lyse with high anionic content bilayers, but show no activity at neutral pH and reach maximal activity at very high pH. This work shows that pH is a major factor in the capability of antibacterial peptides to lyse with liposomes and that secondary structure and binding ability may not be the main determinants.     

The membrane insertion of helical antimicrobial peptides from the N-terminus of Helicobacter pylori ribosomal protein L1

The interaction of two helical antimicrobial peptides, HPA3 and HPA3P with planar supported lipid membranes was quantitatively analysed using two complementary optical biosensors. The peptides are analogues of Hp(2-20) derived from the N-terminus of Helicobacter pylori ribosomal protein L1 (RpL1). The binding of these two peptide analogues to zwitterionic dimyristoyl-phosphatidylcholine (DMPC) and negatively charged membranes composed of DMPC/dimyristoylphosphatidylglycerol (DMPG) (4:1) was determined using surface plasmon resonance (SPR) and dual polarisation interferometry (DPI). Using SPR analysis, it was shown that the proline substitution in HPA3P resulted in much lower binding for both zwitterionic and anionic membranes than HPA3. Structural changes in the planar DMPC and DMPC/DMPG (4:1) bilayers induced by the binding of both Hp(2-20) analogues were then resolved in real-time with DPI. The overall process of peptide-induced changes in membrane structure was analysed by the real-time changes in bound peptide mass as a function of bilayer birefringence. The insertion of both HPA3 and HPA3P into the supported lipid bilayers resulted in a decrease in birefringence with increasing amounts of bound peptide which reflects a decrease in the order of the bilayer. The binding of HPA3 to each membrane was associated with a higher level of bound peptide and greater membrane lipid disordering and a faster and higher degree of insertion into the membrane than HPA3P. Furthermore, the binding of both HPA3 and HPA3P to negatively charged DMPC/DMPG bilayers also leads to a greater disruption of the lipid ordering. These results demonstrate the geometrical changes in the membrane upon peptide insertion and the extent of membrane structural changes can be obtained quantitatively. Moreover, monitoring the effect of peptides on a structurally characterised bilayer has provided further insight into the role of membrane structure changes in the molecular basis of peptide selectivity and activity and may assist in defining the mode of antimicrobial action.     

Lecithin:cholesterol acyltransferase activation by synthetic amphipathic peptides

The amphipathic helical theory of Segrest and colleagues (FEBS Lett.:38:247-253, 1974) proposes that the lipid-binding segments of serum apolipoproteins are in an alpha helical conformation. Furthermore the helices have a hydrophobic face and a hydrophilic face with a specific distribution of positively and negatively charged residues. The importance of the pattern of the charged residues in the lipid binding and lecithin:cholesterol acyltransferase (LCAT) activation by the segments is still debated. We designed a 30-residue peptide, GALA, which in the alpha helical conformation has a hydrophilic face composed of glutamic acid residues (Sabbarao et al.: Biochemistry 26:2964-2972, 1987). GALA behaves like the serum apolipoproteins in its interaction with dimyristoylphosphatidylcholine (DMPC) at neutral pH; the amino terminal tryptophan of GALA undergoes a blue shift in its fluorescence emission spectrum, and the circular dichroism (CD) spectrum indicates that GALA acquires alpha helical structure in the presence of DMPC. A DMPC-GALA:19/1 (molar ratio) complex can be isolated by gel-permeation chromatography. This complex has a discoidal structure with the approximate dimensions of 44-A edge thickness and a 170- to 350-A diameter. GALA activates LCAT with DMPC but not with unsaturated phospholipids as the substrate. The apparent partition coefficient of GALA into DMPC vesicles is 100-fold larger than into egg phosphatidylcholine vesicles. The interaction of GALA with unsaturated lipids at neutral pH is so weak that no detectable change in the spectroscopic properties of GALA or the structure of the liposomes can be detected under the conditions used here. The sequence of GALA differs from previously studied model Apo A1 peptides by the absence of positively charged residues on the hydrophilic face. This indicates that positive charges in Apo A1-like peptides are not required in order to form discoidal structures with saturated phospholipids or to activate LCAT with such lipid substrates.     

Interaction of 18-residue peptides derived from amphipathic helical segments of globular proteins with model membranes

We investigated the interaction of six 18-residue peptides derived from amphipathic helical segments of globular proteins with model membranes. The net charge of the peptides at neutral pH varies from −1 to +6. Circular dichroism spectra indicate that peptides with a high net positive charge tend to fold into a helical conformation in the presence of negatively charged lipid vesicles. In helical conformation, their average hydrophobic moment and hydrophobicity would render them surface-active. The composition of amino acids on the polar face of the helix in the peptides is considerably different. The peptides show variations in their ability to permeabilise zwitterionic and anionic lipid vesicles. Whereas increased net positive charge favours greater permeabilisation, the distribution of charged residues in the polar face also plays a role in determining membrane activity. The distribution of amino acids in the polar face of the helix in the peptides that were investigated do not fall into the canonical classes described. Amphipathic helices, which are part of proteins, with a pattern of amino acid distribution different from those observed in class L, A and others, could help in providing newer insights into peptide-membrane interactions.     

The interaction of peripheral proteins and membranes studied with alpha-lactalbumin and phospholipid bilayers of various compositions

To characterize the interaction of peripheral proteins and membranes at the molecular level, we studied the reversible association of bovine alpha-lactalbumin (BLA) with lipid bilayers composed of different molecular forms of phosphatidylserine or equimolar mixtures of these phosphatidylserine forms and egg yolk phosphatidylcholine. At pH 4.5, almost all BLA (>90%) associates to negatively charged small unilamellar vesicles. The conformational changes that binding to these bilayers induced on the protein were characterized by circular dichroism and fluorescence spectroscopy. Because binding of BLA to negatively charged vesicles is reverted by adjusting the pH back to >6.0, we also investigated the conformation of the membrane-bound protein by NMR-monitored H-D exchange of the backbone amide protons. The conformation adopted by BLA bound to these bilayers resembles a molten globule-like state but the negative ellipticity at 222 nm and the apparent alpha-helix content of the bound protein senses the changes in the physical properties of the membrane. Binding to bilayers in the gel state appears to correlate with an increased amount of alpha-helical structure and with a lower extent of integration into the membrane, corresponding to the adsorbed protein, while the opposite is found for BLA bound to vesicles in the liquid-crystalline phase, corresponding to the embedded conformation. A common feature for the membrane-bound conformations of BLA is that the amphipathic helix C (residues 86 to 99) is an important determinant for the adsorption and further integration of the protein into the membrane.