Characterization of a sulfur-regulated oxygenative alkylsulfatase from Pseudomonas putida S-313

The atsK gene of Pseudomonas putida S-313 was required for growth with alkyl sulfate esters as sulfur source. The AtsK protein was overexpressed in Escherichia coli and purified to homogeneity. Sequence analysis revealed that AtsK was closely related to E. coli taurine dioxygenase (38% amino acid identity). The AtsK protein catalyzed the alpha-ketoglutarate-dependent cleavage of a range of alkyl sulfate esters, with chain lengths ranging from C(4) to C(12), required oxygen and Fe(2+) for activity and released succinate, sulfate, and the corresponding aldehyde as products. Enzyme activity was optimal at pH 7 and was strongly stimulated by ascorbate. Unlike most other characterized alpha-ketoglutarate-dependent dioxygenases, AtsK accepted a range of alpha-keto acids as co-substrates, including alpha-ketoglutarate (K(m) 140 microm), alpha-ketoadipate, alpha-ketovalerate, and alpha-ketooctanoate. The measured K(m) values for hexyl sulfate and SDS were 40 and 34 microm, respectively. The apparent M(r) of the purified enzyme of 121,000 was consistent with a homotetrameric structure, which is unusual for this enzyme superfamily, members of which are usually monomeric or dimeric. The properties and amino acid sequence of the AtsK enzyme thus define it as an unusual oxygenolytic alkylsulfatase and a novel member of the alpha-ketoglutarate-dependent dioxygenase family.     

Succinate complex crystal structures of the alpha-ketoglutarate-dependent dioxygenase AtsK: steric aspects of enzyme self-hydroxylation

The alkylsulfatase AtsK from Pseudomonas putida S-313 is a member of the non-heme iron(II)-alpha-ketoglutarate-dependent dioxygenase superfamily. In the initial step of their catalytic cycle, enzymes belonging to this widespread and versatile family coordinate molecular oxygen to the iron center in the active site. The subsequent decarboxylation of the cosubstrate alpha-ketoglutarate yields carbon dioxide, succinate, and a highly reactive ferryl (IV) species, which is required for substrate oxidation via a complex mechanism involving the transfer of radical species. Non-productive activation of oxygen may lead to harmful side reactions; therefore, such enzymes need an effective built-in protection mechanism. One of the ways of controlling undesired side reactions is the self-hydroxylation of an aromatic side chain, which leads to an irreversibly inactivated species. Here we describe the crystal structure of the alkylsulfatase AtsK in complexes with succinate and with Fe(II)/succinate. In the crystal structure of the AtsK-Fe(II)-succinate complex, the side chain of Tyr(168) is co-ordinated to the iron, suggesting that Tyr(168) is the target of enzyme self-hydroxylation. This is the first structural study of an Fe(II)-alpha-ketoglutarate-dependent dioxygenase that presents an aromatic side chain coordinated to the metal center, thus allowing structural insight into this protective mechanism of enzyme self-inactivation.     

Crystal structure of the non-heme iron dioxygenase PtlH in pentalenolactone biosynthesis

The non-heme iron dioxygenase PtlH from the soil organism Streptomyces avermitilis is a member of the iron(II)/alpha-ketoglutarate-dependent dioxygenase superfamily and catalyzes an essential reaction in the biosynthesis of the sesquiterpenoid antibiotic pentalenolactone. To investigate the structural basis for substrate recognition and catalysis, we have determined the x-ray crystal structure of PtlH in several complexes with the cofactors iron, alpha-ketoglutarate, and the non-reactive enantiomer of the substrate, ent-1-deoxypentalenic acid, in four different crystal forms to up to 1.31 A resolution. The overall structure of PtlH forms a double-stranded barrel helix fold, and the cofactor-binding site for iron and alpha-ketoglutarate is similar to other double-stranded barrel helix fold enzymes. Additional secondary structure elements that contribute to the substrate-binding site in PtlH are not conserved in other double-stranded barrel helix fold enzymes. Binding of the substrate enantiomer induces a reorganization of the monoclinic crystal lattice leading to a disorder-order transition of a C-terminal alpha-helix. The newly formed helix blocks the major access to the active site and effectively traps the bound substrate. Kinetic analysis of wild type and site-directed mutant proteins confirms a critical function of two arginine residues in substrate binding, while simulated docking of the enzymatic reaction product reveals the likely orientation of bound substrate.     

Mycobacterium tuberculosis Rv3406 Is a Type II Alkyl Sulfatase Capable of Sulfate Scavenging

The genome of Mycobacterium tuberculosis (Mtb) encodes nine putative sulfatases, none of which have a known function or substrate. Here, we characterize Mtb’s single putative type II sulfatase, Rv3406, as a non-heme iron (II) and α-ketoglutarate-dependent dioxygenase that catalyzes the oxidation and subsequent cleavage of alkyl sulfate esters. Rv3406 was identified based on its homology to the alkyl sulfatase AtsK from Pseudomonas putida. Using an in vitro biochemical assay, we confirmed that Rv3406 is a sulfatase with a preference for alkyl sulfate substrates similar to those processed by AtsK. We determined the crystal structure of the apo Rv3406 sulfatase at 2.5 Å. The active site residues of Rv3406 and AtsK are essentially superimposable, suggesting that the two sulfatases share the same catalytic mechanism. Finally, we generated an Rv3406 mutant (Δrv3406) in Mtb to study the sulfatase’s role in sulfate scavenging. The Δrv3406 strain did not replicate in minimal media with 2-ethyl hexyl sulfate as the sole sulfur source, in contrast to wild type Mtb or the complemented strain. We conclude that Rv3406 is an iron and α-ketoglutarate-dependent sulfate ester dioxygenase that has unique substrate specificity that is likely distinct from other Mtb sulfatases.     

Crystal structure of mammalian cysteine dioxygenase. A novel mononuclear iron center for cysteine thiol oxidation

Cysteine dioxygenase is a mononuclear iron-dependent enzyme responsible for the oxidation of cysteine with molecular oxygen to form cysteine sulfinate. This reaction commits cysteine to either catabolism to sulfate and pyruvate or the taurine biosynthetic pathway. Cysteine dioxygenase is a member of the cupin superfamily of proteins. The crystal structure of recombinant rat cysteine dioxygenase has been determined to 1.5-A resolution, and these results confirm the canonical cupin beta-sandwich fold and the rare cysteinyltyrosine intramolecular cross-link (between Cys(93) and Tyr(157)) seen in the recently reported murine cysteine dioxygenase structure. In contrast to the catalytically inactive mononuclear Ni(II) metallocenter present in the murine structure, crystallization of a catalytically competent preparation of rat cysteine dioxygenase revealed a novel tetrahedrally coordinated mononuclear iron center involving three histidines (His(86), His(88), and His(140)) and a water molecule. Attempts to acquire a structure with bound ligand using either cocrystallization or soaking crystals with cysteine revealed the formation of a mixed disulfide involving Cys(164) near the active site, which may explain previously observed substrate inhibition. This work provides a framework for understanding the molecular mechanisms involved in thiol dioxygenation and sets the stage for exploration of the chemistry of both the novel mononuclear iron center and the catalytic role of the cysteinyl-tyrosine linkage.     

Engineering p-hydroxyphenylpyruvate dioxygenase to a p-hydroxymandelate synthase and evidence for the proposed benzene oxide intermediate in homogentisate formation

p-Hydroxyphenylpyruvate dioxygenase (HPD) plays a key role in the normal catabolism of tyrosine. An Fe2+/oxygen-dependent enzyme, it converts p-hydroxyphenylpyruvate into homogentisate and is part of the superfamily of alpha-ketoglutarate-dependent enzymes that couples oxidative decarboxylation of an alpha-ketoacid cofactor to oxidative modification of its substrate. In this case, the alpha-ketoacid is part of the substrate side chain. HPD shows strong homology to p-hydroxymandelate synthase (HMS), an enzyme that catalyzes the formation of p-hydroxymandelate from p-hydroxyphenylpyruvate, an early step in the biosynthesis of p-hydroxyphenylglycine, which is a nonproteinogenic amino acid incorporated into several biologically active secondary metabolites. Sequence alignment between the HPD and the HMS enzyme families and analysis of the Pseudomonas fluorescens HPD crystal structure highlighted four residues within each active site that may play roles in catalytic differentiation between the two products. We attempted to convert Streptomyces avermitilis HPD into an engineered S. avermitilis HMS by site-directed mutagenesis of these four residues individually and in combination. HPLC assay analysis of each His6-tagged mutant indicated that F337I successfully produced p-hydroxymandelate, along with homogentisate and an unknown compound. The structure of the latter was determined to be an oxepinone derived from the benzene-oxide intermediate long hypothesized in HPD catalysis.     

Substrate-induced conformational changes in Escherichia coli taurine/alpha-ketoglutarate dioxygenase and insight into the oligomeric structure

The enzymes in the alpha-ketoglutarate (alphaKG) dependent dioxygenase superfamily represent the largest class of non-heme iron oxidases and have important medical, ecological, and biotechnological roles. One such enzyme, taurine/alpha-ketoglutarate dioxygenase (TauD), catalyzes the conversion of 2-aminoethanesulfonate (taurine) to sulfite and aminoacetaldehyde while decomposing alphaKG to succinate and CO(2). This alphaKG dependent dioxygenase is expressed in Escherichia coli under sulfur starvation conditions and allows the cell to utilize taurine, and other similar sulfonates in the environment, as an alternative sulfur source. In this work, we report the structures of the apo and holo forms of TauD to 1.9 A resolution (R(cryst) = 21.2%, R(free) = 24.9%) and 2.5 A resolution (R(cryst) = 22.5%, R(free) = 27.8%), respectively. The models reported herein provide significant new insight into the substrate orientations at the active site and the conformational changes that are induced upon taurine binding. Furthermore, analysis of our crystallographic data coupled with reanalysis of the crystallographic model (resolution = 3.0 A, R(cryst) = 28.1, R(free) = 32.0) presented by Elkins et al. (Biochemistry (2002) 41, 5185-5192) reveals an alternative oligomeric arrangement for the enzyme that is consistent with the conserved primary and secondary structure elements of other alphaKG dependent dioxygenases.     

A theoretical study on the metabolic requirements resulting from alpha-ketoglutarate-dependent cleavage of phenoxyalkanoates

The etherolytic cleavage of phenoxyalkanoic acids in various bacteria is catalyzed by an alpha-ketoglutarate-dependent dioxygenase. In this reaction, the electron acceptor is oxidatively decarboxylated to succinate, whereas the proper substrate is cleaved by forming the oxidized alkanoic acid and the phenolic intermediate. The necessity of regenerating alpha-ketoglutarate and the consequences for the overall metabolism were investigated in a theoretical study. It was found that the dioxygenase mechanism is accompanied by a significant loss of carbon amounting to up to 62.5% in the assimilatory branch, thus defining the upper limit of carbon conversion efficiency. This loss in carbon is almost compensated for in comparison to a monooxygenase-catalyzed initial step when the dissimilatory efforts of the entire metabolism are included: the yield coefficients become similar. The alpha-ketoglutarate-dependent dioxygenase mechanism has more drastic consequences for microorganisms which are restricted in their metabolism to the first step of phenoxyalkanoate degradation by excreting the phenolic intermediate as a dead-end product. In the case of phenoxyacetate derivatives, the cleavage reaction would quickly cease due to the exhaustion of alpha-ketoglutarate and no growth would be possible. With the cleavage products of phenoxypropionate and phenoxybutyrate herbicides, i.e., pyruvate and succinate(semialdehyde), respectively, as the possible products, the regeneration of alpha-ketoglutarate will be guaranteed for stoichiometric reasons. However, the maintenance of the cleavage reaction ought to be restricted due to physiological factors owing to the involvement of other metabolic reactions in the pool of metabolites. These effects are discussed in terms of a putative recalcitrance of these compounds.     

Crystal structure of N-succinylarginine dihydrolase AstB, bound to substrate and product, an enzyme from the arginine catabolic pathway of Escherichia coli

The ammonia-producing arginine succinyltransferase pathway is the major pathway in Escherichia coli and related bacteria for arginine catabolism as a sole nitrogen source. This pathway consists of five steps, each catalyzed by a distinct enzyme. Here we report the crystal structure of N-succinylarginine dihydrolase AstB, the second enzyme of the arginine succinyltransferase pathway, providing the first structural insight into enzymes from this pathway. The enzyme exhibits a pseudo 5-fold symmetric alpha/beta propeller fold of circularly arranged betabetaalphabeta modules enclosing the active site. The crystal structure indicates clearly that this enzyme belongs to the amidinotransferase (AT) superfamily and that the active site contains a Cys-His-Glu triad characteristic of the AT superfamily. Structures of the complexes of AstB with the reaction product and a C365S mutant with bound the N-succinylarginine substrate suggest a catalytic mechanism that consists of two cycles of hydrolysis and ammonia release, with each cycle utilizing a mechanism similar to that proposed for arginine deiminases. Like other members of the AT superfamily of enzymes, AstB possesses a flexible loop that is disordered in the absence of substrate and assumes an ordered conformation upon substrate binding, shielding the ligand from the bulk solvent, thereby controlling substrate access and product release.     

X-ray crystal structure of Escherichia coli taurine/alpha-ketoglutarate dioxygenase complexed to ferrous iron and substrates

Taurine/alpha-ketoglutarate dioxygenase (TauD), a non-heme Fe(II) oxygenase, catalyses the conversion of taurine (2-aminoethanesulfonate) to sulfite and aminoacetaldehyde concurrent with the conversion of alpha-ketoglutarate (alphaKG) to succinate and CO(2). The enzyme allows Escherichia coli to use taurine, widely available in the environment, as an alternative sulfur source. Here we describe the X-ray crystal structure of TauD complexed to Fe(II) and both substrates, alphaKG and taurine. The tertiary structure and fold of TauD are similar to those observed in other enzymes from the broad family of Fe(II)/alphaKG-dependent oxygenases, with closest structural similarity to clavaminate synthase. Using the TauD coordinates, a model was determined for the closely related enzyme 2,4-dichlorophenoxyacetate/alphaKG dioxygenase (TfdA), supporting predictions derived from site-directed mutagenesis and other studies of that biodegradative protein. The TauD structure and TfdA model define the metal ligands and the positions of nearby aromatic residues that undergo post-translational modifications involving self-hydroxylation reactions. The substrate binding residues of TauD were identified and those of TfdA predicted. These results, along with sequence alignment information, reveal how TauD selects a tetrahedral substrate anion in preference to the planar carboxylate selected by TfdA, providing insight into the mechanism of enzyme catalysis.     

Purification and characterization of two enantioselective alpha-ketoglutarate-dependent dioxygenases, RdpA and SdpA, from Sphingomonas herbicidovorans MH

Alpha-ketoglutarate-dependent (R)-dichlorprop dioxygenase (RdpA) and alpha-ketoglutarate-dependent (S)-dichlorprop dioxygenase (SdpA), which are involved in the degradation of phenoxyalkanoic acid herbicides in Sphingomonas herbicidovorans MH, were expressed and purified as His6-tagged fusion proteins from Escherichia coli BL21(DE3)(pLysS). RdpA and SdpA belong to subgroup II of the alpha-ketoglutarate-dependent dioxygenases and share the specific motif HXDX(24)TX(131)HX(10)R. Amino acids His-111, Asp-113, and His-270 and amino acids His-102, Asp-104, and His 257 comprise the 2-His-1-carboxylate facial triads and were predicted to be involved in iron binding in RdpA and SdpA, respectively. RdpA exclusively transformed the (R) enantiomers of mecoprop [2-(4-chloro-2-methylphenoxy)propanoic acid] and dichlorprop [2-(2,4-dichlorophenoxy)propanoic acid], whereas SdpA was specific for the (S) enantiomers. The apparent Km values were 99 microM for (R)-mecoprop, 164 microM for (R)-dichlorprop, and 3 microM for alpha-ketoglutarate for RdpA and 132 microM for (S)-mecoprop, 495 microM for (S)-dichlorprop, and 20 microM for alpha-ketoglutarate for SdpA. Both enzymes had high apparent Km values for oxygen; these values were 159 microM for SdpA and >230 microM for RdpA, whose activity was linearly dependent on oxygen at the concentration range measured. Both enzymes had narrow cosubstrate specificity; only 2-oxoadipate was able to replace alpha-ketoglutarate, and the rates were substantially diminished. Ferrous iron was necessary for activity of the enzymes, and other divalent cations could not replace it. Although the results of growth experiments suggest that strain MH harbors a specific 2,4-dichlorophenoxyacetic acid-converting enzyme, tfdA-, tfdAalpha-, or cadAB-like genes were not discovered in a screening analysis in which heterologous hybridization and PCR were used.     

Kinetic dissection of the catalytic mechanism of taurine:alpha-ketoglutarate dioxygenase (TauD) from Escherichia coli

Recent studies on taurine:alpha-ketoglutarate dioxygenase (TauD) from Escherichia coli have provided evidence for a three-step, minimal kinetic mechanism involving the quaternary TauD.Fe(II).alpha-ketoglutarate.taurine complex, the taurine-hydroxylating Fe(IV)-oxo intermediate (J) that forms upon reaction of the quaternary complex with O(2), and a poorly defined, Fe(II)-containing intermediate state that converts in the rate-limiting step back to the quaternary complex [Price, J. C., Barr, E. W., Tirupati, B., Bollinger, J. M., Jr., and Krebs, C. (2003) Biochemistry 42, 7497-7508]. The mapping of this kinetic mechanism onto the consensus chemical mechanism for the Fe(II)- and alpha-ketoglutarate-dependent engendered several predictions and additional questions that have been experimentally addressed in the present study. The results demonstrate (1) that postulated intermediates between the quaternary complex and J accumulate very little or not at all; (2) that decarboxylation of alpha-ketoglutarate occurs prior to or concomitantly with formation of J; (3) that the second intermediate state comprises one or more product complex with Mossbauer features that are partially resolved from those of the binary TauD.Fe(II), ternary TauD.Fe(II).alpha-ketoglutarate, and quaternary TauD.Fe(II).alpha-ketoglutarate.taurine complexes; and (4) that the rate-determining step in the catalytic cycle is release of product(s) prior to the rapid, ordered binding of alpha-ketoglutarate and then taurine to regenerate the O(2)-reactive quaternary complex. The results thus integrate the previously proposed kinetic and chemical mechanisms and indicate which of the postulated intermediates in the latter will be detectable only upon perturbation of the kinetics by changes in reaction conditions (e.g., temperature), protein mutagenesis, the use of substrate analogues, or some combination of these.     

Subtle difference between benzene and toluene dioxygenases of Pseudomonas putida

Benzene dioxygenase and toluene dioxygenase from Pseudomonas putida have similar catalytic properties, structures, and gene organizations, but they differ in substrate specificity, with toluene dioxygenase having higher activity toward alkylbenzenes. The catalytic iron-sulfur proteins of these enzymes consist of two dissimilar subunits, alpha and beta; the alpha subunit contains a [2Fe-2S] cluster involved in electron transfer, the catalytic nonheme iron center, and is also responsible for substrate specificity. The amino acid sequences of the alpha subunits of benzene and toluene dioxygenases differ at only 33 of 450 amino acids. Chimeric proteins and mutants of the benzene dioxygenase alpha subunit were constructed to determine which of these residues were primarily responsible for the change in specificity. The protein containing toluene dioxygenase C-terminal region residues 281 to 363 showed greater substrate preference for alkyl benzenes. In addition, we identified four amino acid substitutions in this region, I301V, T305S, I307L, and L309V, that particularly enhanced the preference for ethylbenzene. The positions of these amino acids in the alpha subunit structure were modeled by comparison with the crystal structure of naphthalene dioxygenase. They were not in the substrate-binding pocket but were adjacent to residues that lined the channel through which substrates were predicted to enter the active site. However, the quadruple mutant also showed a high uncoupled rate of electron transfer without product formation. Finally, the modified proteins showed altered patterns of products formed from toluene and ethylbenzene, including monohydroxylated side chains. We propose that these properties can be explained by a more facile diffusion of the substrate in and out of the substrate cavity.     

Crystal structures of Xanthomonas campestris OleA reveal features that promote head-to-head condensation of two long-chain fatty acids

OleA is a thiolase superfamily enzyme that has been shown to catalyze the condensation of two long-chain fatty acyl-coenzyme A (CoA) substrates. The enzyme is part of a larger gene cluster responsible for generating long-chain olefin products, a potential biofuel precursor. In thiolase superfamily enzymes, catalysis is achieved via a ping-pong mechanism. The first substrate forms a covalent intermediate with an active site cysteine that is followed by reaction with the second substrate. For OleA, this conjugation proceeds by a nondecarboxylative Claisen condensation. The OleA from Xanthomonas campestris has been crystallized and its structure determined, along with inhibitor-bound and xenon-derivatized structures, to improve our understanding of substrate positioning in the context of enzyme turnover. OleA is the first characterized thiolase superfamily member that has two long-chain alkyl substrates that need to be bound simultaneously and therefore uniquely requires an additional alkyl binding channel. The location of the fatty acid biosynthesis inhibitor, cerulenin, that possesses an alkyl chain length in the range of known OleA substrates, in conjunction with a single xenon binding site, leads to the putative assignment of this novel alkyl binding channel. Structural overlays between the OleA homologues, 3-hydroxy-3-methylglutaryl-CoA (HMG-CoA) synthase and the fatty acid biosynthesis enzyme FabH, allow assignment of the two remaining channels: one for the thioester-containing pantetheinate arm and the second for the alkyl group of one substrate. A short β-hairpin region is ordered in only one of the crystal forms, and that may suggest open and closed states relevant for substrate binding. Cys143 is the conserved catalytic cysteine within the superfamily, and the site of alkylation by cerulenin. The alkylated structure suggests that a glutamic acid residue (Glu117β) likely promotes Claisen condensation by acting as the catalytic base. Unexpectedly, Glu117β comes from the other monomer of the physiological dimer.     

The first structure of a bacterial class B Acid phosphatase reveals further structural heterogeneity among phosphatases of the haloacid dehalogenase fold

AphA is a periplasmic acid phosphatase of Escherichia coli belonging to class B bacterial phosphatases, which is part of the DDDD superfamily of phosphohydrolases. The crystal structure of AphA has been determined at 2.2A and its resolution extended to 1.7A on an AuCl(3) derivative. This represents the first crystal structure of a class B bacterial phosphatase. Despite the lack of sequence homology, the AphA structure reveals a haloacid dehalogenase-like fold. This finding suggests that this fold could be conserved among members of the DDDD superfamily of phosphohydrolases. The active enzyme is a homotetramer built by using an extended N-terminal arm intertwining the four monomers. The active site of the native enzyme, as prepared, hosts a magnesium ion, which can be replaced by other metal ions. The structure explains the non-specific behaviour of AphA towards substrates, while a structure-based alignment with other phosphatases provides clues about the catalytic mechanism.     

Molecular Dynamics Simulations and Structure-Guided Mutagenesis Provide Insight into the Architecture of the Catalytic Core of the Ectoine Hydroxylase

Many bacteria amass compatible solutes to fend-off the detrimental effects of high osmolarity on cellular physiology and water content. These solutes also function as stabilizers of macromolecules, a property for which they are referred to as chemical chaperones. The tetrahydropyrimidine ectoine is such a compatible solute and is widely synthesized by members of the Bacteria. Many ectoine producers also synthesize the stress protectant 5-hydroxyectoine from the precursor ectoine, a process that is catalyzed by the ectoine hydroxylase (EctD). The EctD enzyme is a member of the non-heme-containing iron(II) and 2-oxoglutarate-dependent dioxygenase superfamily. A crystal structure of the EctD protein from the moderate halophile Virgibacillus salexigens has previously been reported and revealed the coordination of the iron catalyst, but it lacked the substrate ectoine and the co-substrate 2-oxoglutarate. Here we used this crystal structure as a template to assess the likely positioning of the ectoine and 2-oxoglutarate ligands within the active site by structural comparison, molecular dynamics simulations, and site-directed mutagenesis. Collectively, these approaches suggest the positioning of the iron, ectoine, and 2-oxoglutarate ligands in close proximity to each other and with a spatial orientation that will allow the region-selective and stereo-specific hydroxylation of (4S)-ectoine to (4S,5S)-5-hydroxyectoine. Our study thus provides a view into the catalytic core of the ectoine hydroxylase and suggests an intricate network of interactions between the three ligands and evolutionarily highly conserved residues in members of the EctD protein family.     

Crystal Structure of Aldehyde Dehydrogenase 16 Reveals Trans-Hierarchical Structural Similarity and a New Dimer

The aldehyde dehydrogenase (ALDH) superfamily is a vast group of enzymes that catalyze the NAD⁺-dependent oxidation of aldehydes to carboxylic acids. ALDH16 is perhaps the most enigmatic member of the superfamily, owing to its extra C-terminal domain of unknown function and the absence of the essential catalytic cysteine residue in certain non-bacterial ALDH16 sequences. Herein we report the first production of recombinant ALDH16, the first biochemical characterization of ALDH16, and the first crystal structure of ALDH16. Recombinant expression systems were generated for the bacterial ALDH16 from Loktanella sp. and human ALDH16A1. Four high-resolution crystal structures of Loktanella ALDH16 were determined. Loktanella ALDH16 is found to be a bona fide enzyme, exhibiting NAD⁺-binding, ALDH activity, and esterase activity. In contrast, human ALDH16A1 apparently lacks measurable aldehyde oxidation activity, suggesting that it is a pseudoenzyme, consistent with the absence of the catalytic Cys in its sequence. The fold of ALDH16 comprises three domains: NAD⁺-binding, catalytic, and C-terminal. The latter is unique to ALDH16 and features a Rossmann fold connected to a protruding β-flap. The tertiary structural interactions of the C-terminal domain mimic the quaternary structural interactions of the classic ALDH superfamily dimer, a phenomenon we call “trans-hierarchical structural similarity.” ALDH16 forms a unique dimer in solution, which mimics the classic ALDH superfamily dimer-of-dimer tetramer. Small-angle X-ray scattering shows that human ALDH16A1 has the same dimeric structure and fold as Loktanella ALDH16. We suggest that the Loktanella ALDH16 structure may be considered to be the archetype of the ALDH16 family.     

Subtle Difference between Benzene and Toluene Dioxygenases of Pseudomonas putida

Benzene dioxygenase and toluene dioxygenase from Pseudomonas putida have similar catalytic properties, structures, and gene organizations, but they differ in substrate specificity, with toluene dioxygenase having higher activity toward alkylbenzenes. The catalytic iron-sulfur proteins of these enzymes consist of two dissimilar subunits, α and β; the α subunit contains a [2Fe-2S] cluster involved in electron transfer, the catalytic nonheme iron center, and is also responsible for substrate specificity. The amino acid sequences of the α subunits of benzene and toluene dioxygenases differ at only 33 of 450 amino acids. Chimeric proteins and mutants of the benzene dioxygenase α subunit were constructed to determine which of these residues were primarily responsible for the change in specificity. The protein containing toluene dioxygenase C-terminal region residues 281 to 363 showed greater substrate preference for alkyl benzenes. In addition, we identified four amino acid substitutions in this region, I301V, T305S, I307L, and L309V, that particularly enhanced the preference for ethylbenzene. The positions of these amino acids in the α subunit structure were modeled by comparison with the crystal structure of naphthalene dioxygenase. They were not in the substrate-binding pocket but were adjacent to residues that lined the channel through which substrates were predicted to enter the active site. However, the quadruple mutant also showed a high uncoupled rate of electron transfer without product formation. Finally, the modified proteins showed altered patterns of products formed from toluene and ethylbenzene, including monohydroxylated side chains. We propose that these properties can be explained by a more facile diffusion of the substrate in and out of the substrate cavity.     

Crystal structures of a novel ferric reductase from the hyperthermophilic archaeon Archaeoglobus fulgidus and its complex with NADP+

BACKGROUND: Studies performed within the last decade have indicated that microbial reduction of Fe(III) to Fe(II) is a biologically significant process. The ferric reductase (FeR) from Archaeoglobus fulgidus is the first reported archaeal ferric reductase and it catalyzes the flavin-mediated reduction of ferric iron complexes using NAD(P)H as the electron donor. Based on its catalytic activity, the A. fulgidus FeR resembles the bacterial and eukaryotic assimilatory type of ferric reductases. However, the high cellular abundance of the A. fulgidus FeR (approximately 0.75% of the total soluble protein) suggests a catabolic role for this enzyme as the terminal electron acceptor in a ferric iron-based respiratory pathway [1]. RESULTS: The crystal structure of recombinant A. fulgidus FeR containing a bound FMN has been solved at 1.5 A resolution by multiple isomorphous replacement/ anomalous diffraction (MIRAS) phasing methods, and the NADP+- bound complex of FeR was subsequently determined at 1.65 A resolution. FeR consists of a dimer of two identical subunits, although only one subunit has been observed to bind the redox cofactors. Each subunit is organized around a six-stranded antiparallel beta barrel that is homologous to the FMN binding protein from Desulfovibrio vulgaris. This fold has been shown to be related to a circularly permuted version of the flavin binding domain of the ferredoxin reductase superfamily. The A. fulgidus ferric reductase is further distinguished from the ferredoxin reductase superfamily by the absence of a Rossmann fold domain that is used to bind the NAD(P)H. Instead, FeR uses its single domain to provide both the flavin and the NAD(P)H binding sites. Potential binding sites for ferric iron complexes are identified near the cofactor binding sites. CONCLUSIONS: The work described here details the structures of the enzyme-FMN, enzyme-FMN-NADP+, and possibly the enzyme-FMN-iron intermediates that are present during the reaction mechanism. This structural information helps identify roles for specific residues during the reduction of ferric iron complexes by the A. fulgidus FeR.