Metabolism of resorcinylic compounds by bacteria: orcinol pathway in Pseudomonas putida.

Enrichment cultures yielded two strains of Pseudomonas putida capable of growth with orcinol (3,5-dihydroxytoluene) as the sole source of carbon. Experiments with cell suspensions and cell extracts indicate that orcinol is metabolized by hydroxylation of the benzene ring followed successively by ring cleavage and hydrolyses to give 2 mol of acetate and 1 mol of pyruvate per mol of orcinol as shown: orcinol leads to 2,3,5-trihydroxytoluene leads to 2,4,6-trioxoheptanoate leads to acetate + acetylpyruvate leads to acetate + pyruvate. Evidence for this pathway is based on: (i) high respiratory activities of orcinol-grown cells towards 2,3,5-trihydroxytoluene; (ii) transient accumulation of a quinone, probably 2-hydroxy-6-methyl-1,4-benzoquinone, during grouth with orcinol; (iii) formation of pyruvate and acetate from orcinol, 2,3,5-trihydroxytoluene, and acetylpyruvate catalyzed by extracts of orcinol, but not by succinate-grown cells; (iv) characterization of the product of oxidation of 3-methylcatechol (an analogue of 2,3,5-trihydroxytoluene) showing that oxygenative cleavage occurs between carbons bearing methyl and hydroxyl substituents; (v) transient appearance of a compound having spectral properties similar to those of acetylpyruvate during 2,3,5-trihydroxytoluene oxidation by extracts of orcinol-grown cells. Orcinol hydroxylase exhibits catalytic activity when resorcinol or m-cresol is substituted for orcinol; hydroxyquinol and 3-methylcatechol are substrates for the ring cleavage enzyme 2,3,5-trihydroxytoluene-1,2-oxygenase. The enzymes of this pathway are induced by growth with orcinol but not with glucose or succinate.     

Purification of soluble guanylate cyclase from rat lung.

The soluble form of guanylate cyclase from rat lung has been purified approximately 23,000-fold to homogeneity by isoelectric precipitation, GTP-Sepharose chromatography, and preparative gel electrophoresis. A single protein-staining band is observed after analytical gel electrophoresis on either 4 or 7.5% polyacrylamide gels. The final purified enzyme has a specific activity of about 700 nmol of cyclic GMP formed/min/mg of protein at 37 degrees C in the presence of 4.8 mM MnCl2 and 100 micrometer GTP. Bovine serum albumin appears to slightly increase guanylate cyclase activity, but mainly stabilizes the purified enzyme; in its presence, specific activities in excess of 1 mumol of cyclic GMP formed/min/mg of enzyme protein can be obtained. When Mg2+ or Ca2+ are substituted for Mn2+, specific activities decrease to approximately 21 and 40 nmol of cyclic GMP formed/min/mg of protein, respectively. The apparent Michaelis constant for MnGTP in the presence of 4.8 mM MnCl2 is 10.2 micrometer. Kinetic patterns on double reciprocal plots as a function of free Mn2+ are concave downward. The native enzyme has a molecular weight of approximately 151,000 as determined on Sephacryl S-200; sodium dodecyl sulfate-polyacrylamide gel electrophoresis results in two protein-staining bands with approximate molecular weights of 79,400 and 74,000. Thus, it appears that the soluble form of guanylate cyclase from rat lung exists as a dimer.     

Purification and characterization of a novel enzyme, arylalkyl acylamidase, from Pseudomonas putida Sc2.

A novel enzyme, arylalkyl acylamidase, which shows a strict specificity for N-acetyl arylalkylamines, but not acetanilide derivatives, was purified from the culture broth of Pseudomonas putida Sc2. The purified enzyme appeared to be homogeneous, as judged by native and SDS/PAGE. The enzyme has a molecular mass of approximately 150 kDa and consists of four identical subunits. The purified enzyme catalyzed the hydrolysis of N-acetyl-2-phenylethylamine to 2-phenylethylamine and acetic acid at the rate of 6.25 mumol.min-1.mg-1 at 30 degrees C. It also catalyzed the hydrolysis of various N-acetyl arylalkylamines containing a benzene or indole ring, and acetic acid arylalkyl esters. The enzyme did not hydrolyze acetanilide, N-acetyl aliphatic amines, N-acetyl amino acids, N-acetyl amino sugars or acylthiocholine. The apparent Km for N-acetylbenzylamine, N-acetyl-2-phenylethylamine and N-acetyl-3-phenylpropylamine are 41 mM, 0.31 mM and 1.6 mM, respectively. The purified enzyme was sensitive to thiol reagents such as Ag2SO4, HgCl2 and p-chloromercuribenzoic acid, and its activity was enhanced by divalent metal ions such as Zn2+, Mg2+ and Mn2+.     

Purification and some properties of uridine diphosphate N-acetylglucosamine pyrophosphorylase from Neurospora crassa.

Uridine diphosphate N-acetylglucosamine pyrophosphorylase (EC. 2.7.7.23) of Neurospora crassa has been purified approximately 210-fold with dithiothreitol as the stabilizing agent by use of chromatographic techniques. The enzyme preparation appeared to be homogeneous when subjected to electrophoresis. The molecular weight was estimated as approximately 37 000 by gel filtration. The enzyme had an isoelectric point around pH 4.4. Maximum activity of the enzyme was observed at pH 7.5. The enzyme required Mg2+, which may be replaced by other divalent cations such as Mn2+ and Co2+ for lesser degrees of effectiveness. The enzyme was strictly specific for UDP-N-acetylglucosamine as the substrate. The estimated values of Km were 2.2 mM for UDP-N-acetylglucosamine and 5.4 mM for inorganic pyrophosphate. The enzyme activity was highly stimulated by the addition of dithiothreitol or dithioerythritol but was lost by sulfhydryl inhibitory reagents.     

Purification and biochemical characterization of phenylacetyl-CoA ligase from Pseudomonas putida. A specific enzyme for the catabolism of phenylacetic acid

A new enzyme, phenylacetyl-CoA ligase (AMP-forming) (PA-CoA ligase, EC 6.2.1-) involved in the catabolism of phenylacetic acid (PAA) in Pseudomonas putida is described and characterized. PA-CoA ligase was specifically induced by PAA when P. putida was grown in a chemically defined medium in which phenylacetic acid was the sole carbon source. Hydroxyl, methyl-phenylacetyl derivatives, and other PAA close structural molecules did not induce the synthesis of this enzyme and neither did acetic, butyric, succinic, nor fatty acids (greater than C5 atoms carbon length). PA-CoA ligase requires ATP, CoA, PAA, and MgCl2 for its activity. The maximal rate of catalysis was achieved in 50 mM HCl/Tris buffer, pH 8.2, at 30 degrees C and under these conditions, the Km calculated for ATP, CoA, and PAA were 9.7, 1.0, and 16.5 mM, respectively. The enzyme is inhibited by some divalent cations (Cu2+, Zn2+, and Hg2+) and by the sulfhydryl reagents N-ethylmaleimide, 5,5'-dithiobis(2-nitrobenzoic acid), and p-chloromercuribenzoate. PA-CoA ligase was purified to homogeneity (513-fold). It runs as a single polypeptide in 12% sodium dodecyl sulfate-polyacrylamide gel electrophoresis and has a molecular mass of 48 +/- 1 kDa. PA-CoA ligase does not use as substrate either 3-hydroxyphenylacetic, 4-hydroxyphenylacetic, or 3,4-dihydroxyphenylacetic acids and shows a substrate specificity different from other acyl-CoA-activating enzymes. The enzyme is detected in P. putida from the early logarithmic phase of growth and is repressed by glucose, suggesting that PA-CoA ligase is a specific enzyme involved in the utilization of PAA as energy source.     

Purification, characterization, and amino acid composition of rabbit pulmonary bleomycin hydrolase

Bleomycin (BLM) hydrolase, a protective enzyme that inactivates the antitumor antibiotic BLM, was purified (6000-fold) to homogeneity from rabbit lungs by DEAE-Sephacel, phenyl-Sepharose chromatography, BLM-Sepharose affinity chromatography, and Mono Q fast protein liquid chromatography. The enzyme had a molecular mass of 250,000 daltons as demonstrated by Superose gel permeation chromatography and polyacrylamide gel electrophoresis (PAGE) under native conditions. Sodium dodecyl sulfate-PAGE revealed a single band of 50,000 daltons, suggesting a pentameric structure. The Km and Vmax for BLM A2 were 1.3 mM and 5.9 mumol mg-1 h-1, respectively. BLM hydrolase activity was labile, had a half-life of 25 min at 56 degrees C, 10 h at 37 degrees C, and 5 days at 4 degrees C, and was stabilized by 2 mM dithiothreitol. The enzyme had a pH optimum of 7.0-7.5 and was inhibited by N-ethylmaleimide, leupeptin, puromycin, and divalent cations such as Cu2+, Cd2+, Zn2+, and Co2+ but was unaffected by chelating agents. On the basis of Mono P chromatofocusing chromatography, three isoforms of BLM hydrolase (apparent pI's of 5.3, 4.5, and 4.3) were present in rabbit pulmonary cytosol. The elution profiles of BLM hydrolase from phenyl-Sepharose and Mono P chromatofocusing indicated that this enzyme is hydrophobic and acidic. This was confirmed by amino acid composition analysis, which demonstrated that 48% of the total amino acids of bleomycin hydrolase were hydrophobic and 37% were acidic.     

Guanylate cyclase in Escherichia coli. Purification and properties.

Guanylate cyclase has been purified from extracts of Escherichia coli. After a 1000-fold purification, the enzyme contains only minor contaminants as judged by disc gel electrophoresis. The Km for GTP is approximately 7 times 10(-5) M and the optimal pH is 8.0. More activity is observed with Mn2+ than with Mg2+, and maximal activity is observed at 0.14 mM Mn2+ and 1.4 mM Mg2+. Based on its behavior on Sephadex G-100, the molecular weight of E. coli guanylate cyclase is about 30,000. Disc gel electrophoretic analysis indicates that the enzyme consists of a single polypeptide chain. Guanylate cyclase does not form 3':5'-AMP from ATP, and therefore, is distinct from adenylate cyclase.     

D-Malic enzyme of Pseudomonas fluorescens

By the enrichment culture technique 14 gram-negative bacteria and two yeast strains were isolated that used D(+)-malic acid as sole carbon source. The bacteria were identified as Pseudomonas putida, Pseudomonas fluorescens, Pseudomonas aeruginosa and Klebsiella aerogenes. In cell-free extracts of P. fluorescens and P. putida the presence of malate dehydrogenase, D-malic enzyme (NAD-dependent) and L-malic enzyme (NADP-dependent) was demonstrated. D-Malic enzyme from P. fluorescens was purified. Stabilization of the enzyme by 50 mM ammonium sulphate an 1 mM EDTA was essential. Preparation of D-malic enzyme that gave one band with disc gel electrophoresis showed a specific activity of 4-5 U/mg. D-Malic enzyme requires divalent cations. The Km values were for malate Km = 0.3 mM and for NAD Km = 0.08 mM. The pH optimum for the reaction was found to be in the range of pH 8.1 to pH 8.8. D-Malic enzyme is partially inhibited by oxaloacetic acid, meso-tartaric acid, D-lactic acid and ATP. Determined by gel filtration and gradient gel electrophoresis, the molecular weight was approximately 175 000.     

Crystalline L-histidine ammonia-lyase of Achromobacter liquidum. Crystallization and enzymic properties.

Crystalline L-histidine ammonia-lyase of Achromobacter liquidum was prepared with a 24% recovery of the activity. The specific activity of the pure enzyme (63 mumol of urocanic acid min-1 mg-1) is similar to those so far reported for the enzyme from other sources. The purified enzyme appeared to be homogeneous by analytical disc electrophoresis and isoelectric focusing (pI = 4.95). The molecular weight determined by Sephadex G-200 gel filtration is 200000. The optimum pH is 8.2, and the optimum temperature is 50 degrees C. The enzyme showed strict specificity to L-histidine (Km = 3.6 mM). Several histidine derivatives are not susceptible to the enzyme but do inhibit the enzyme activity competitively; the most effective inhibitors are L-histidine methyl ester (Ki = 3.66 mM) and beta-imidazole lactic acid (Ki = 3.84 mM). L-Histidine hydrazide (Ki = 36 mM) and imidazole (Ki = 6 mM) noncompetitively inhibited the enzyme EDTA markedly inhibited enzyme activity and this inhibition were reversed by divalent metal ions such as Mn2+, Co2+ Zn2+, Ni2+, Mg2+, and Ca2+. These results suggest that the presence of divalent metal ions is necessary for the catalytic activity of histidine ammonia-lyase. Sodium borohydride and hydrogen peroxide inhibited the enzyme activity.     

Purification and characterization of phosphoenolpyruvate carboxylase from a cyanobacterium.

Phosphoenolpyruvate (PEP) carboxylase (EC 4.1.1.31) was purified 100-fold from the cyanobacterium Coccochloris peniocystis with a yield of 10%. A single isozyme was found at all stages of purification, and activity of other beta-carboxylase enzymes was not detected. The apparent molecular weight of the native enzyme was 560,000. Optimal activity was observed at pH 8.0 and 40 degrees C, yielding a Vmax of 8.84 mumol/mg of protein per min. The enzyme was not protected from heat inactivation by aspartate, malate, or oxalacetate. Michaelis-Menten reaction kinetics were observed for various concentrations of PEP, Mg2+, and HCO3-, yielding Km values of 0.6, 0.27, and 0.8 mM, respectively. Enzyme activity was inhibited by aspartate and tricarboxylic acid cycle intermediates and noncompetitively inhibited by oxalacetate, while activation by any compound was not observed. However, the enzyme was sensitive to metabolic control at subsaturating substrate concentrations at neutral pH. These data indicate that cyanobacterial PEP carboxylase resembles the enzyme isolated from C3 plants (plants which initially incorporate CO2 into C3 sugars) and suggest that PEP carboxylase functions anapleurotically in cyanobacteria.     

Isolation and characterization of a dinucleoside triphosphatase from Saccharomyces cerevisiae.

An enzyme able to cleave dinucleoside triphosphates has been purified 3,750-fold from Saccharomyces cerevisiae. Contrary to the enzymes previously shown to catabolize Ap4A in yeast, this enzyme is a hydrolase rather than a phosphorylase. The dinucleoside triphosphatase molecular ratio estimated by gel filtration is 55,000. Dinucleoside triphosphatase activity is strongly stimulated by the presence of divalent cations. Mn2+ displays the strongest stimulating effect, followed by Mg2+, Co2+, Cd2+, and Ca2+. The Km value for Ap3A is 5.4 microM (50 mM Tris-HCl [pH 7.8], 5 mM MgCl2, and 0.1 mM EDTA; 37 degrees C). Dinucleoside polyphosphates are substrates of this enzyme, provided that they contain more than two phosphates and that at least one of the two bases is a purine (Ap3A, Ap3G, Ap3C, Gp3G, Gp3C, m7Gp3A, m7Gp3G, Ap4A, Ap4G, Ap4C, Ap4U, Gp4G, and Ap5A are substrates; AMP, ADP, ATP, Ap2A, and Cp4U are not). Among the products, a nucleoside monophosphate is always formed. The specificity of cleavage of methylated dinucleoside triphosphates and the molecular weight of dinucleoside triphosphatase indicate that this enzyme is different from the mRNA decapping enzyme previously characterized (A. Stevens, Mol. Cell. Biol. 8:2005-2010, 1988).     

Purification and properties of a novel extra-cellular thermotolerant metallolipase of Bacillus coagulans MTCC-6375 isolate

A novel extra-cellular lipase from Bacillus coagulans MTCC-6375 was purified 76.4-fold by DEAE anion exchange and Octyl Sepharose chromatography. The purified enzyme was found to be electrophoretically pure by denaturing gel electrophoresis and possessed a molecular mass of approximately 103 kDa. The lipase was optimally active at 45 degrees C and retained approximately 50% of its original activity after 20 min of incubation at 55 degrees C. The enzyme was optimally active at pH 8.5. Mg2+, Cu2+, Ca2+, Hg2+, Al3+, and Fe3+ at 1mM enhanced hydrolytic activity of the lipase. Interestingly, Hg2+ ions resulted in a maximal increase in lipase activity but Zn2+ and Co2+ ions showed an antagonistic effect on this enzyme. EDTA at 150 mM concentration inhibited the activity of lipase but Hg2+ or Al3+ (10mM) restored most of the activity of EDTA-quenched lipase. Phenyl methyl sulfonyl fluoride (PMSF, 15 mM) decreased 98% of original activity of lipase. The lipase was more specific to p-nitrophenyl esters of 8 (pNPC) and 16 (pNPP) carbon chain length esters. The lipase had a Vmax and Km of 0.44 mmol mg(-1)min(-1) and 28 mM for hydrolysis of pNPP, and 0.7 mmol mg(-1)min(-1) and 32 mM for hydrolysis of pNPC, respectively.     

Purification, quaternary structure, composition, and properties of D-ribulose-1,5-bisphosphate carboxylase from Thiobacillus intermedius.

D-Ribulose-1,5-bisphosphate (RuBP) carboxylase has been purified from glutamate-CO2-S2O3(2)-grown Thiobacillus intermedius by pelleting the enzyme from the high-speed supernatant and by intermediary crystallization followed by sedimentation into a discontinuous 0.2 to 0.8 M sucrose gradient. The enzyme was homogeneous by the criteria of electrophoresis on polyacrylamide gels of several acrylamide concentrations, sedimentation velocity and equilibrium measurements, and electron microscopic observations of negatively stained preparations. The molecular weights of the enzyme determined by sedimentation equilibrium and light-scattering measurements averaged 462,500 +/- 13,000. The enzyme consisted of closely similar or identical polypeptide chains of a molecular weight of 54,500 +/- 5,450 determined by polyacrylamide gel electrophoresis in the presence of sodium dodecyl sulfate. The S(0)20,w of the enzyme was 18.07S +/- 0.22. Electron microscopic examination suggested that the octomeric enzyme (inferred from the molecular measurements mentioned) had a cubical structure. The specific activity of the enzyme was 2.76 mumol of RuBP-dependent CO2 fixed/min per mg of protein (at pH 8 and 30 C), and the turnover number in terms of moles of CO2 fixed per mole of catalytic site per second was 2.6. The enzyme was stable for 3 months at -20 C and at least 4 weeks at 0 C. The apparent Km for CO2 was 0.75 mM, and Km values for RuBP and Mg2+ were 0.076 and 3.6 mM, respectively. Dialyzed enzyme could be fully reactivated by the addition of 20 mM Mg2+ and partially reactivated by 20 mM Co2+, but Cd2+, Mn2+, Ca2+, and Zn2+ had no effect. The compound 6-phosphogluconate was a linear competitive inhibitor with respect to RuBP when it had been preincubated with enzyme, Mg2+, and HCO3-.     

Acetyl-coenzyme A carboxylase from the developing endosperm of Ricinus communis. I. Isolation and characterization

Acetyl-coenzyme A carboxylase has been purified from the plastids of developing castor oil seeds. High concentrations of the enzyme are required for stability as well as the presence of dithiothreitol, glycerol, bicarbonate, Triton X-100, and polyvinyl-pyrrolidone. It has a molecular weight of approximately 528,000 and appears to be membrane associated. Acetyl-CoA carboxylase is active over a wide pH range with an optimum at 8.0. Arrhenius plots are biphasic. The enzyme displays normal Michaelis-Menten kinetics with limiting Michaelis constants of KATP, 0.1 mM; KHCO-3, 3.0 mM; and Kacetyl-CoA, 0.05 mM. Monovalent cations, such as K+ and Cs+, exert a small activating effect on the enzyme while a divalent cation, Mn2+ or Mg2+, is essential for activity. The enzyme does not appear to be highly regulated by cellular metabolites.     

delta1-piperideine-2-carboxylate reductase of Pseudomonas putida.

Pseudomonas putida metabolizes D-lysine to delta 1-piperideine-2-carboxylate and L-pipecolate. The second step of this catabolic pathway is catalyzed by delta 1-piperideine-2-carboxylate reductase. This enzyme was isolated and purified from cells grown on DL-lysine as substrate. The enzyme was very unstable, resulting in low recovery of activity and low purity after a six-step purification procedure. The enzyme had a pH optimum of 8.0 to 8.3. The Km values for delta 1-piperideine-2-carboxylate and NADPH were 0.23 and 0.13 mM, respectively. NADPH at concentrations above 0.15 mM was inhibitory to the enzyme. Delta 1-pyrroline-5-carboxylate, pyroglutamate, and NADH were poor substrates or coenzyme for delta 1-piperideine-2-carboxylate reductase. The enzyme reaction from delta 1-piperideine-2-carboxylate to L-pipecolate was irreversible. EDTA, sodium pyrophosphate, and dithiothreitol at concentrations of 1 mM protected the enzyme during storage. The enzyme was inhibited almost totally by Zn2+, Mn2+, Hg2+ Co2+, and p-chloromercuribenzoate at concentrations of 0.1 mM. The enzyme had a molecular weight of about 200,000. Both D-lysine and L-lysine were good inducers for the enzyme. Neither delta1-piperideine-2-carboxylate nor L-pipecolate was an effective inducer for the enzyme. P. putida cells grew on D-lysine only after a 5- to 8-h lag, which could be abolished by adding a supplement of 0.01% alpha-ketoglutarate or other readily metabolizable compounds. Such a supplement also converted the noncoordinate induction of this enzyme and pipecolate oxidase, both of the D-lysine pathway, to coordinacy. However, this effect was not observed if the enzyme pair was from different pathways of lysine metabolism in this organism (i.e., the D- and L-lysine pathways).     

Purification and properties of an inducible beta-galactosidase isolated from the yeast Kluyveromyces lactis.

beta-Galactosidase (EC 3.2.1.32) was purified 80-fold from the yeast Kluyveromyces lactis induced for this enzyme by growth on lactose. When the purified enzyme was subjected to electrophoresis on an acrylamide gel in the presence of sodium dodecyl sulfate, one protein with an apparent molecular weight of 135,000 was observed. The enzyme has a sedimentation coefficient of 9.6S. This beta-galactosidase and the one from Escherichia coli are not antigenically related. Maximal enzyme activity requires Na+ and Mn2+ and a reducing agent. beta-Galactosidase has Km values of 12 to 17 and 1.6 mM for lactose and o-nitrophenyl-beta-D-galactoside, respectively. The hydrolase and transgalactosylase activities of the enzyme are similar to those of E. coli beta-galactosidase.     

Purification and properties of mitochondrial phosphoenolpyruvate carboxykinase from liver of Squalus acanthias

Liver from Squalus acanthias (spiny dogfish), a representative elasmobranch, contains approximately 1.4 units (mumol/min) of phosphoenolpyruvate carboxykinase activity per gram and approximately 90% of the total units of activity are localized in the mitochondria. The mitochondrial phosphoenolpyruvate carboxykinase was isolated and characterized. The purified enzyme has properties generally similar to those found in mammalian and avian species. The enzyme has a molecular weight of approximately 70,000 and exists in a functional state as a monomer. The isolated enzyme displays a dual cation requirement (e.g., 6 mM Mg2+ and 10 microM Mn2+) for maximal activity; very little activity is observed when Mg2+ is present alone, and the maximal activity attained with Mn2+ alone (millimolar concentrations required) is significantly less than that observed under optimal conditions with both cations present. When assayed in the direction of oxalacetate formation there is a lag in product formation with time; the lag can be eliminated by the presence of 50 microM GTP (product). The Km for substrates is not affected by Mn2+ concentration, suggesting that the role of Mn2+ may not be related to substrate binding. The apparent Km for phosphoenolpyruvate (approximately 1 mM) is substantially higher than that reported for phosphoenolpyruvate carboxykinase from other species. The activity of phosphoenolpyruvate carboxykinase is increased 70% by physiological concentrations of urea. Maximal velocity of the reaction in the direction of oxalacetate formation is approximately half that of the reverse reaction.     

Purification and characterization of N-hydroxy-2-acetylaminofluorene sulfotransferase from rat liver.

N-Hydroxy-2-acetylaminofluorene (N-OH-2-AAF) sulfotransferase is an enzyme that catalyzes the sulfate transfer from the active sulfate, 3'-phosphoadenosine 5'-phosphosulfate (PAPS), to N-OH-2-AAF to form a highly reactive product acetylaminofluorene N-sulfate. It has been purified about 2000-fold with a yield of over 12% from adult Sprague-Dawley male rat livers by an eight-step procedure. The final preparation was homogeneous on analytrical disc gel electrophoresis. The purified enzyme had activity toward p-nitrophenol with an approximately 1600-fold increase in specific activity over the crude homogenate, but it had almost no detectable activity toward steroids such as estrone, beta-estradiol, testosterone, dehydroisoandrosterone, and corticosterone. There was also very little sulfation activity toward serotonin and L-tyrosine methyl ester. The optimal pH for the enzyme activity is approximately 6.3 when measured in sodium phosphate buffer. Mg2+ at 6 to 9 mM could increase the enzyme activity up to 30%. Mn2+ activated the enzyme only slightly at very low concentrations. Zn2+, Co2+, Cu2+, and Ni2+ were all strongly inhibitory, but Ca2+ had very little effect. Thiol compounds were found to have a stabilizing effect and thiol-blocking reagents were potent inhibitors for this enzyme. The pure enzyme was very unstable especially in diluet solutions. The isoelectric point (pl) of the enzyme is 5.66 +/- 0.07. The molecular weight of the native enzyme was 68,000 +/- 500 as estimated by Sephadex G-100 and G-200 gel filtrations. A single component with molecular weight of 38,250 +/- 1,350 was observed on sodium dodecyl sulfate gel electrophoresis in the absence and presence of 2-mercaptoethanol. Comparison of the enzyme activity in mail and female rat livers at each stage of purification revealed that there was only a trace amount of N-OH-2-AAF sulfotransferase present in the female rat liver.     

Dienelactone hydrolase from Pseudomonas sp. strain B13.

Dienelactone hydrolase (EC 3.1.1.45) catalyzes the conversion of cis- or trans-4-carboxymethylenebut-2-en-4-olide (dienelactone) to maleylacetate. An approximately 24-fold purification from extracts of 3-chlorobenzoate-grown Pseudomonas sp. strain B13 yielded a homogeneous preparation of the enzyme. The purified enzyme crystallized readily and proved to be a monomer with a molecular weight of about 30,000. Each dienelactone hydrolase molecule contains two cysteinyl side chains. One of these was readily titrated by stoichiometric amounts of p-chloromercuribenzoate, resulting in inactivation of the enzyme; the inactivation could be reversed by the addition of dithiothreitol. The other cysteinyl side chain appeared to be protected in the native protein against chemical reaction with p-chloromercuribenzoate. The properties of sulfhydryl side chains in dienelactone hydrolase resembled those that have been characterized for bacterial 4-carboxymethylbut-3-en-4-olide (enol-lactone) hydrolases (EC 3.1.1.24), which also are monomers with molecular weights of about 30,000. The amino acid composition of the dienelactone hydrolase resembled the amino acid composition of enol-lactone hydrolase from Pseudomonas putida, and alignment of the NH2-terminal amino acid sequence of the dienelactone hydrolase with the corresponding sequence of an Acinetobacter calcoaceticus enol-lactone hydrolase revealed sequence identity at 8 of the 28 positions. These observations foster the hypothesis that the lactone hydrolases share a common ancestor. The lactone hydrolases differed in one significant property: the kcat of dienelactone hydrolase was 1,800 min-1, an order of magnitude below the kcat observed with enol-lactone hydrolases. The relatively low catalytic activity of dienelactone hydrolase may demand its production at the high levels observed for induced cultures of Pseudomonas sp. strain B13.