DNA聚合酶对PacBio SMRT测序结果影响的评价

目的 评估不同DNA聚合酶是否会对以16S rRNA全长为测序靶点的肠道微生物多样性研究结果产生影响。方法 用美国太平洋公司的三代测序仪（PacBio single molecule real-time sequencing technology）对3份分别采用KAPA HiFiTM HotStart DNA聚合酶和PCRBIO HotStart DNA聚合酶扩增的军犬粪便样品进行精确至“种”水平的测序分析。结果 经配对Mann-Whitney U检验显示,不同DNA聚合酶扩增的同一样品在门、属和种水平上差异无统计学意义（P>0.05）,然而在某些相对含量较少的操作分类单元（OTU）上,其扩增效率存在差异。经基于非加权UniFrac距离的非加权组平均法聚类分析和基于加权UniFrac距离的非参数多元方差分析发现不同DNA聚合酶扩增的同一样品其多样性差异无统计学意义（P>0.05）。结论 KAPA HiFiTM HotStart DNA聚合酶和PCRBIO HotStart DNA聚合酶虽对模板DNA扩增存在一定的偏好性,但该偏好性不影响PacBio SMRT测序结果。     

A polymerase engineered for bisulfite sequencing

Bisulfite sequencing is a key methodology in epigenetics. However, the standard workflow of bisulfite sequencing involves heat and strongly basic conditions to convert the intermediary product 5,6-dihydrouridine-6-sulfonate (dhU6S) (generated by reaction of bisulfite with deoxycytidine (dC)) to uracil (dU). These harsh conditions generally lead to sample loss and DNA damage while milder conditions may result in incomplete conversion of intermediates to uracil. Both can lead to poor recovery of bisulfite-treated DNA by the polymerase chain reaction (PCR) as either damaged DNA and/or intermediates of bisulfite treatment are poor substrate for standard DNA polymerases. Here we describe an engineered DNA polymerase (5D4) with an enhanced ability to replicate and PCR amplify bisulfite-treated DNA due to an ability to bypass both DNA lesions and bisulfite intermediates, allowing significantly milder conversion conditions and increased sensitivity in the PCR amplification of bisulfite-treated DNA. Incorporation of the 5D4 DNA polymerase into the bisulfite sequencing workflow thus promises significant sensitivity and efficiency gains.     

Optimization of DNA Recovery and Amplification from Non-Carbonized Archaeobotanical Remains

Ancient DNA (aDNA) recovered from archaeobotanical remains can provide key insights into many prominent archaeological research questions, including processes of domestication, past subsistence strategies, and human interactions with the environment. However, it is often difficult to isolate aDNA from ancient plant materials, and furthermore, such DNA extracts frequently contain inhibitory substances that preclude successful PCR amplification. In the age of high-throughput sequencing, this problem is even more significant because each additional endogenous aDNA molecule improves analytical resolution. Therefore, in this paper, we compare a variety of DNA extraction techniques on primarily desiccated archaeobotanical remains and identify which method consistently yields the greatest amount of purified DNA. In addition, we test five DNA polymerases to determine how well they replicate DNA extracted from non-charred ancient plant remains. Based upon the criteria of resistance to enzymatic inhibition, behavior in quantitative real-time PCR, replication fidelity, and compatibility with aDNA damage, we conclude these polymerases have nuanced properties, requiring researchers to make educated decisions as to which one to use for a given task. The experimental findings should prove useful to the aDNA and archaeological communities by guiding future research methodologies and ensuring precious archaeobotanical remains are studied in optimal ways, and may thereby yield important new perspectives on the interactions between humans and past plant communities.     

An efficient pipeline for ancient DNA mapping and recovery of endogenous ancient DNA from whole‐genome sequencing data

Ancient DNA research has developed rapidly over the past few decades due to improvements in PCR and next‐generation sequencing (NGS) technologies, but challenges still exist. One major challenge in relation to ancient DNA research is to recover genuine endogenous ancient DNA sequences from raw sequencing data. This is often difficult due to degradation of ancient DNA and high levels of contamination, especially homologous contamination that has extremely similar genetic background with that of the real ancient DNA. In this study, we collected whole‐genome sequencing (WGS) data from 6 ancient samples to compare different mapping algorithms. To further explore more effective methods to separate endogenous DNA from homologous contaminations, we attempted to recover reads based on ancient DNA specific characteristics of deamination, depurination, and DNA fragmentation with different parameters. We propose a quick and improved pipeline for separating endogenous ancient DNA while simultaneously decreasing homologous contaminations to very low proportions. Our goal in this research was to develop useful recommendations for ancient DNA mapping and for separation of endogenous DNA to facilitate future studies of ancient DNA.     

Blocking human contaminant DNA during PCR allows amplification of rare mammal species from sedimentary ancient DNA

Analyses of degraded DNA are typically hampered by contamination, especially when employing universal primers such as commonly used in environmental DNA studies. In addition to false-positive results, the amplification of contaminant DNA may cause false-negative results because of competition, or bias, during the PCR. In this study, we test the utility of human-specific blocking primers in mammal diversity analyses of ancient permafrost samples from Siberia. Using quantitative PCR (qPCR) on human and mammoth DNA, we first optimized the design and concentration of blocking primer in the PCR. Subsequently, 454 pyrosequencing of ancient permafrost samples amplified with and without the addition of blocking primer revealed that DNA sequences from a diversity of mammalian representatives of the Beringian megafauna were retrieved only when the blocking primer was added to the PCR. Notably, we observe the first retrieval of woolly rhinoceros (Coelodonta antiquitatis) DNA from ancient permafrost cores. In contrast, reactions without blocking primer resulted in complete dominance by human DNA sequences. These results demonstrate that in ancient environmental analyses, the PCR can be biased towards the amplification of contaminant sequences to such an extent that retrieval of the endogenous DNA is severely restricted. The application of blocking primers is a promising tool to avoid this bias and can greatly enhance the quantity and the diversity of the endogenous DNA sequences that are amplified.     

Sources of PCR-induced distortions in high-throughput sequencing data sets

PCR permits the exponential and sequence-specific amplification of DNA, even from minute starting quantities. PCR is a fundamental step in preparing DNA samples for high-throughput sequencing. However, there are errors associated with PCR-mediated amplification. Here we examine the effects of four important sources of error—bias, stochasticity, template switches and polymerase errors—on sequence representation in low-input next-generation sequencing libraries. We designed a pool of diverse PCR amplicons with a defined structure, and then used Illumina sequencing to search for signatures of each process. We further developed quantitative models for each process, and compared predictions of these models to our experimental data. We find that PCR stochasticity is the major force skewing sequence representation after amplification of a pool of unique DNA amplicons. Polymerase errors become very common in later cycles of PCR but have little impact on the overall sequence distribution as they are confined to small copy numbers. PCR template switches are rare and confined to low copy numbers. Our results provide a theoretical basis for removing distortions from high-throughput sequencing data. In addition, our findings on PCR stochasticity will have particular relevance to quantification of results from single cell sequencing, in which sequences are represented by only one or a few molecules.     

Single-molecule polymerase chain reaction reduces bias: application to DNA methylation analysis by bisulfite sequencing

The treatment of DNA with bisulfite, which converts C to U but leaves 5-methyl-C unchanged, forms the basis of many analytical techniques for DNA methylation analysis. Many techniques exist for measuring the methylation state of a single CpG but, for analysis of an entire region, cloning and sequencing remains the gold standard. However, biases in polymerase chain reaction (PCR) amplification and in cloning can skew the results. We hypothesized that single-molecule PCR (smPCR) amplification would eliminate the PCR amplification bias because competition between templates that amplify at different efficiencies no longer exists. The amplified products can be sequenced directly, thus eliminating cloning bias. We demonstrated this accurate and unbiased approach by analyzing a sample that was expected to contain a 50:50 ratio of methylated to unmethylated molecules: a region of the X-linked FMR1 gene from a human female cell line. We compared traditional cloning and sequencing to smPCR and sequencing. Sequencing smPCR products gave an expected methylated to unmethylated ratio of 48:52, whereas conventional cloning and sequencing gave a biased ratio of 72:28. Our results show that smPCR sequencing can eliminate both PCR and cloning bias and represents an attractive approach to bisulfite sequencing.     

Library preparation methods for next-generation sequencing: Tone down the bias

Next-generation sequencing (NGS) has caused a revolution in biology. NGS requires the preparation of libraries in which (fragments of) DNA or RNA molecules are fused with adapters followed by PCR amplification and sequencing. It is evident that robust library preparation methods that produce a representative, non-biased source of nucleic acid material from the genome under investigation are of crucial importance. Nevertheless, it has become clear that NGS libraries for all types of applications contain biases that compromise the quality of NGS datasets and can lead to their erroneous interpretation. A detailed knowledge of the nature of these biases will be essential for a careful interpretation of NGS data on the one hand and will help to find ways to improve library quality or to develop bioinformatics tools to compensate for the bias on the other hand. In this review we discuss the literature on bias in the most common NGS library preparation protocols, both for DNA sequencing (DNA-seq) as well as for RNA sequencing (RNA-seq). Strikingly, almost all steps of the various protocols have been reported to introduce bias, especially in the case of RNA-seq, which is technically more challenging than DNA-seq. For each type of bias we discuss methods for improvement with a view to providing some useful advice to the researcher who wishes to convert any kind of raw nucleic acid into an NGS library.     

PCR and DNA sequencing

Specific DNA segments defined by the sequence of two oligonucleotides can be enzymatically amplified up to a millionfold using the polymerase chain reaction (PCR). One of the most significant uses of this technique is for generation of sequencing templates, either from cloned inserts or directly from genomic DNA. To avoid the problem of reassociation of the linear DNA strands in the sequencing reaction, ssDNA templates can be produced directly in the PCR or generated directly from dsDNA by enzymatic treatment, electrophoretic separation or affinity purification. By combining PCR with direct sequencing, both the amplification and the sequencing reaction can be performed in the same vial. Finally, use of fluorescently labeled terminators or sequencing primers will allow the whole procedure to be amenable to complete automation.     

Analyzing and minimizing PCR amplification bias in Illumina sequencing libraries

Despite the ever-increasing output of Illumina sequencing data, loci with extreme base compositions are often under-represented or absent. To evaluate sources of base-composition bias, we traced genomic sequences ranging from 6% to 90% GC through the process by quantitative PCR. We identified PCR during library preparation as a principal source of bias and optimized the conditions. Our improved protocol significantly reduces amplification bias and minimizes the previously severe effects of PCR instrument and temperature ramp rate.     

Enhancing PCR amplification and sequencing using DNA-binding proteins

The polymerase chain reaction (PCR) is a powerful core molecular biology technique, which when coupled to chain termination sequencing allows gene and DNA sequence information to be derived rapidly. A number of modifications to the basic PCR format have been developed in an attempt to increase amplification efficiency and the specificity of the reaction. We have applied the use of DNA-binding protein, gene 32 protein from bacteriophage T4 (T4gp32) to increase amplification efficiency with a number of diverse templates. In addition, we have found that using single-stranded DNA-binding protein (SSB) or recA protein in DNA sequencing reactions dramatically increases the resolution of sequencing runs. The use of DNA-binding proteins in amplification and sequencing may prove to be generally applicable in improving the yield and quality of a number of templates from various sources.     

Detection of DNA Sequences Refractory to PCR Amplification Using a Biophysical SERRS Assay (Surface Enhanced Resonant Raman Spectroscopy)

The analysis of ancient or processed DNA samples is often a great challenge, because traditional Polymerase Chain Reaction – based amplification is impeded by DNA damage. Blocking lesions such as abasic sites are known to block the bypass of DNA polymerases, thus stopping primer elongation. In the present work, we applied the SERRS-hybridization assay, a fully non-enzymatic method, to the detection of DNA refractory to PCR amplification. This method combines specific hybridization with detection by Surface Enhanced Resonant Raman Scattering (SERRS). It allows the detection of a series of double-stranded DNA molecules containing a varying number of abasic sites on both strands, when PCR failed to detect the most degraded sequences. Our SERRS approach can quickly detect DNA molecules without any need for DNA repair. This assay could be applied as a pre-requisite analysis prior to enzymatic reparation or amplification. A whole new set of samples, both forensic and archaeological, could then deliver information that was not yet available due to a high degree of DNA damage.     

Novel thermostable Y-family polymerases: applications for the PCR amplification of damaged or ancient DNAs

For many years, Taq polymerase has served as the stalwart enzyme in the PCR amplification of DNA. However, a major limitation of Taq is its inability to amplify damaged DNA, thereby restricting its usefulness in forensic applications. In contrast, Y-family DNA polymerases, such as Dpo4 from Sulfolobus solfataricus, can traverse a wide variety of DNA lesions. Here, we report the identification and characterization of five novel thermostable Dpo4-like enzymes from Acidianus infernus, Sulfolobus shibatae, Sulfolobus tengchongensis, Stygiolobus azoricus and Sulfurisphaera ohwakuensis, as well as two recombinant chimeras that have enhanced enzymatic properties compared with the naturally occurring polymerases. The Dpo4-like polymerases are moderately processive, can substitute for Taq in PCR and can bypass DNA lesions that normally block Taq. Such properties make the Dpo4-like enzymes ideally suited for the PCR amplification of damaged DNA samples. Indeed, by using a blend of Taq and Dpo4-like enzymes, we obtained a PCR amplicon from ultraviolet-irradiated DNA that was largely unamplifyable with Taq alone. The inclusion of thermostable Dpo4-like polymerases in PCRs, therefore, augments the recovery and analysis of lesion-containing DNA samples, such as those commonly found in forensic or ancient DNA molecular applications.     

Rapid quantification of DNA libraries for next-generation sequencing

The next-generation DNA sequencing workflows require an accurate quantification of the DNA molecules to be sequenced which assures optimal performance of the instrument. Here, we demonstrate the use of qPCR for quantification of DNA libraries used in next-generation sequencing. In addition, we find that qPCR quantification may allow improvements to current NGS workflows, including reducing the amount of library DNA required, increasing the accuracy in quantifying amplifiable DNA, and avoiding amplification bias by reducing or eliminating the need to amplify DNA before sequencing.     

BARCRAWL and BARTAB: software tools for the design and implementation of barcoded primers for highly multiplexed DNA sequencing

Background  

Advances in automated DNA sequencing technology have greatly increased the scale of genomic and metagenomic studies. An increasingly popular means of increasing project throughput is by multiplexing samples during the sequencing phase. This can be achieved by covalently linking short, unique "barcode" DNA segments to genomic DNA samples, for instance through incorporation of barcode sequences in PCR primers. Although several strategies have been described to insure that barcode sequences are unique and robust to sequencing errors, these have not been integrated into the overall primer design process, thus potentially introducing bias into PCR amplification and/or sequencing steps.     

Direct sequencing of long polymerase chain reaction fragments

Direct sequencing of polymerase chain reaction (PCR)-generated templates is a commonly used technique in molecular biology laboratories. We describe an improved method for direct sequencing of PCR fragments longer than 20 kb obtained with a commercial mixture ofTaq andPwo DNA polymerases. The sequencing protocol was optimized for an automated infrared DNA sequencer, consistently yielding long reads (500–600 bases).     

Comparing the performance of three ancient DNA extraction methods for high‐throughput sequencing

The DNA molecules that can be extracted from archaeological and palaeontological remains are often degraded and massively contaminated with environmental microbial material. This reduces the efficacy of shotgun approaches for sequencing ancient genomes, despite the decreasing sequencing costs of high‐throughput sequencing (HTS). Improving the recovery of endogenous molecules from the DNA extraction and purification steps could, thus, help advance the characterization of ancient genomes. Here, we apply the three most commonly used DNA extraction methods to five ancient bone samples spanning a ~30 thousand year temporal range and originating from a diversity of environments, from South America to Alaska. We show that methods based on the purification of DNA fragments using silica columns are more advantageous than in solution methods and increase not only the total amount of DNA molecules retrieved but also the relative importance of endogenous DNA fragments and their molecular diversity. Therefore, these methods provide a cost‐effective solution for downstream applications, including DNA sequencing on HTS platforms.     

DNA sequencing by a subcloning-walking strategy using a specific and semi-random primer in the polymerase chain reaction.

In its basic concept, in vitro DNA amplification by the polymerase chain reaction (PCR) is restricted to those instances in which segments of known sequence flank the fragment to be amplified. Recently, techniques have been developed for amplification of unknown DNA sequences. These techniques, however, are dependent on the presence of suitable restriction endonuclease sites. Here, we describe a strategy for PCR amplification of DNA that lies outside the boundaries of known sequence. It is based on the use of one specific primer, homologous to the known sequence, and one semi-random primer. Restriction sites in the 5' proximal regions of both primers allow for cloning of the amplified DNA in a suitable sequencing vector or any other vector. It was shown by sequence analysis that the cloned DNA fragments represent contiguous DNA fragments that are flanked at one side by the sequence of the specific primer. When omitting the semi-random primer, a single clone was obtained, which originated from PCR amplification of target DNA by the specific primer in both directions.     

单分子PCR产物错误率分析

碱基错配致使PCR扩增产物中存在突变序列.大量模板PCR扩增时突变序列所占的比例较低,对随后进行的PCR产物分析影响不大,但当对微量甚至单个模板DNA扩增时,情况则完全不同.对单分子PCR产物的错误率进行了理论分析,结果表明：根据实验目的和条件,选择忠实性不同的聚合酶是十分关键的.