Unweighted state as a sidestep preparation improve the initiation and reaching performance for basketball players

The preparatory motion of a defensive motion in contact sport such as basketball should be small and involve landing on both feet for strict time and motion constraints. We thus proposed the movement creating a unweighted state. Ten basketball players performed a choice reaction sidestepping task with and without the voluntary, continuous vertical fluctuation movement. The results indicated that the preparatory movement shortened the time of their sidestep initiation (301 vs. 314 ms, p = 0.011) and reaching performance (883 vs. 910 ms, p = 0.018) but did not increase their peak ground reaction force or movement velocity. The mechanism of the improvement was estimated to be the following: in the preparation phase, the vertical body fluctuation created the force fluctuation; after the direction signal, the unweighted state can shorten the time required to initiate the sidestepping (unweighted: 279 ms; weighted: 322 ms, p = 0.002); around the initiation phase, the dropping down of the body and weighted state can contribute to the reaching performance. We conducted additional experiment investigating muscle–tendon-complex dynamics and muscle activity using ultrasound device and electromyography. The result suggests that the building up of active state of muscle might explain the improvement of sidestepping performance.     

Orthoses posted in both the forefoot and rearfoot reduce moments and angular impulses on lower extremity joints during walking

The purpose of the present study was to determine the effects of orthoses designed to support the forefoot and rearfoot on the kinematics and kinetics of the lower extremity joints during walking. Fifteen participants volunteered for this study. Kinematic and kinetic variables during overground walking were compared with the participants wearing sandals without orthoses or sandals with orthoses. Orthoses increased knee internal abduction moment during late stance and knee abduction angular impulse, and reduced the medial ground reaction force during late stance, adduction free moment, forefoot eversion angle, ankle inversion moment and angular impulse, hip adduction angle, hip abduction moment, and hip external rotation moment and angular impulse (p<0.05). Orthoses decreased the torsional forces on the lower extremity and reduced the loading at the hip during walking. These findings combined with our previous studies and those of others suggest that forefoot abnormalities are critically important in influencing lower extremity kinematics and kinetics, and may underlie some non-traumatic lower extremity injuries.     

Expressing the joint moments of drop jumps and sidestep cutting in different reference frames – does it matter?

Joint moments help us understand joint loading and muscle function during movement. However, the interpretation depends on the choice of reference frame, but the different reference frames have not been compared in dynamic, high-impact sporting movements. We have compared the magnitude and the resulting ranking of hip and knee joint moments expressed in the laboratory coordinate system, the local system of the distal segment and projected or decomposed to the Joint Coordinate System (JCS) axes. Hip and knee joint moments of drop jumps and sidestep cutting in 70 elite female handball players were calculated based on recordings from an eight-camera 240 Hz system and two force platforms and expressed with the four methods. The greatest variations in magnitude between conditions were seen for drop jump hip internal rotation (range: 0.31–0.71 Nm/kg) and sidestep cutting knee flexion (2.87–3.39 Nm/kg) and hip internal rotation (0.87–2.36 Nm/kg) and knee internal rotation (0.10–0.40 Nm/kg) moments. The rank correlations were highest between conditions for flexion moments (0.88–1.00) and sidestep cutting abduction moments (0.71–0.98). The rank correlations ranged from 0.64 to 0.73 for drop jump knee abduction moments and between −0.17 and 0.67 for hip and knee internal rotation moments. Expression of joint moments in different reference systems affects the magnitude and ranking of athletes. This lack of consistency may complicate the comparison and combination of results. Projection to the JCS is the only method where joint moments correspond to muscle and ligament loading. More widespread adoption of this convention could facilitate comparison of studies and ease the interpretation of results.     

Relationship between eccentric hip torque and lower-limb kinematics: gender differences

The purposes of this study were to compare lower-limb kinematics between genders, and determine the relationships among eccentric hip abductor and lateral rotator torques and lower-limb kinematics. The movements of the pelvis, femur, and knee were calculated for 16 women and 16 men during the single-leg squat. Eccentric hip abductor and lateral rotator torques were measured using an isokinetic dynamometer. The results showed that women had greater contralateral pelvic depression, femur adduction, and knee abduction than men. The eccentric hip abductor and lateral rotator torques were correlated with coronal plane femur and knee movements in the overall sample. When the genders were analyzed separately, it was observed that women with greater eccentric hip abductor torque exhibited less femur adduction and femur medial rotation, and greater knee adduction excursion. No significant relationship was observed between the isokinetic and kinematic variables in the male group. The differences between the genders help to explain the greater rate of knee disorders observed in women. Moreover, the eccentric hip abduction action seemed to be more important in women to control the lower-limb movements.     

Effect of hip flexibility on optimal stalder performances on high bar

In the optimisation of sports movements using computer simulation models, the joint actuators must be constrained in order to obtain realistic results. In models of a gymnast, the main constraint used in previous studies was maximum voluntary active joint torque. In the stalder, gymnasts reach their maximal hip flexion under the bar. The purpose of this study was to introduce a model of passive torque to assess the effect of the gymnast's flexibility on the technique of the straddled stalder. A three-dimensional kinematics driven simulation model was developed. The kinematics of the shoulder flexion, hip flexion and hip abduction were optimised to minimise torques for four hip flexion flexibilities: 100°, 110°, 120° and 130°. With decreased flexibility, the piked posture period is shorter and occurs later. Moreover the peaks of shoulder and hip torques increase. Gymnasts with low hip flexibility need to be stronger to achieve a stalder; hip flexibility should be considered by coaches before teaching this skill.     

Lower-limb muscle function during sidestep cutting

To investigate lower-limb muscle function during sidestep cutting, prior studies have analysed electromyography (EMG) data together with three dimensional motion analysis. Such an approach does not directly quantify the biomechanical role of individual lower-limb muscles during a sidestep cut. This study recorded three dimensional motion analysis, ground reaction force (GRF) and EMG data for eight healthy males executing an unanticipated sidestep cut. Using a musculoskeletal modelling approach, muscle function was determined by computing the muscle contributions to the GRFs and lower-limb joint moments. We found that bodyweight support (vertical GRF) was primarily provided by the vasti, gluteus maximus, soleus and gastrocnemius. These same muscles, along with the hamstrings, were also primarily responsible for modulating braking and propulsion (anteroposterior GRF). The vasti, gluteus maximus and gluteus medius were the key muscles for accelerating the centre-of-mass towards the desired cutting direction by generating a medially-directed GRF. Our findings have implications for designing retraining programs to improve sidestep cutting technique.     

Lower extremity control during turns initiated with and without hip external rotation

The pirouette turn is often initiated in neutral and externally rotated hip positions by dancers. This provides an opportunity to investigate how dancers satisfy the same mechanical objectives at the whole-body level when using different leg kinematics. The purpose of this study was to compare lower extremity control strategies during the turn initiation phase of pirouettes performed with and without hip external rotation. Skilled dancers (n=5) performed pirouette turns with and without hip external rotation. Joint kinetics during turn initiation were determined for both legs using ground reaction forces (GRFs) and segment kinematics. Hip muscle activations were monitored using electromyography. Using probability-based statistical methods, variables were compared across turn conditions as a group and within-dancer. Despite differences in GRFs and impulse generation between turn conditions, at least 90% of each GRF was aligned with the respective leg plane. A majority of the net joint moments at the ankle, knee, and hip acted about an axis perpendicular to the leg plane. However, differences in shank alignment relative to the leg plane affected the distribution of the knee net joint moment when represented with respect to the shank versus the thigh. During the initiation of both turns, most participants used ankle plantar flexor moments, knee extensor moments, flexor and abductor moments at the push leg׳s hip, and extensor and abductor moments at the turn leg׳s hip. Representation of joint kinetics using multiple reference systems assisted in understanding control priorities.     

Gender differences exist in the hip joint moments of healthy older walkers

Gender differences in the incidence of symptomatic hip osteoarthritis (OA), changes in hip cartilage volume and hip joint space and rates hip arthroplasty of older people are reported in the literature. As the rate of progression of OA is in part mechanically modulated it is possible that this gender bias may be related to inherent differences (if they exist) in walking mechanics between older males and females. The purpose of this study was to examine potential mechanisms for gender differences in hip joint mechanics during walking by testing the hypotheses that females would exhibit higher hip flexion, adduction and internal rotation moments but not significantly greater normalized ground reaction forces (GRFs). Forty-two healthy subjects (21 male, 21 female), ages 50–79 yr were recruited for gait analysis. In support of the hypotheses, greater external hip adduction and internal rotation along with hip extension moments were found for females compared to males after normalizing for body size for all self-selected walking speeds. Differences in walking style (kinematics) were the main determinants in the joint kinetic differences as no differences in the normalized GRFs were found. As external joint moments are surrogate measures of the joint contact forces, the results of this study suggest the hip joint stress for the female population is higher compared to male population. This is in favor of a hypothesis that the increased joint contact stress in a female population could contribute to a greater joint degeneration at the hip in females as compared with males.     

Kinematic adaptations to a variable stiffness shoe: mechanisms for reducing joint loading

A recently described variable-stiffness shoe has been shown to reduce the adduction moment and pain in patients with medial-compartment knee osteoarthritis. The mechanism associated with how this device modifies overall gait patterns to reduce the adduction moment is not well understood. Yet this information is important for applying load modifying intervention for the treatment of knee osteoarthritis. A principal component analysis (PCA) was used to test the hypothesis that there are differences in the frontal plane kinematics that are correlated with differences in the ground reaction forces (GRFs) and center of pressure (COP) for a variable-stiffness compared to a constant-stiffness control shoe. Eleven healthy adults were tested in a constant-stiffness control shoe and a variable-stiffness shoe while walking at self-selected speeds. The PCA was performed on trial vectors consisting of all kinematic, GRF and COP data. The projection of trial vectors onto the linear combination of four PCs showed there were significant differences between shoes. The interpretation of the PCs indicated an increase in the ankle eversion, knee abduction and adduction, decreases in the hip adduction and pelvic obliquity angles and reduced excursion of both the COP and peak medial-lateral GRFs for the variable-stiffness compared to the control shoe. The variable-stiffness shoe produced a unique dynamic change in the frontal plane motion of the ankle, hip and pelvis that contributed to changes in the GRF and COP and thus reduced the adduction moment at a critical instant during gait suggesting a different mechanism that was seen with fixed interventions (e.g. wedges).     

System of the performance evaluation criteria weighted per positions in the basketball game

Based upon the expertise performed by ten basketball professional relative importance coefficients with regard to positions in the game were determined for nineteen performance evaluation criteria. High degree of interobservers agreement was obtained concerning all positions (from 0.91 to 0.98). In concordance with the obtained results the particular play positions were explicitly described, as well as similarities and differences between them were determined from the aspect of the single criteria importance. The following criteria had an above average importance for the: Position 1--levels of defensive pressure, transition defense efficiency, the ball control, passing skills, dribble penetration, outside shots, and transition offence efficiency; Position 2--level of defensive pressure, transition defense efficiency, outside shots, dribble penetration, offence without the ball, and transition offence efficiency; Position 3--transition defense efficiency, outside shots, dribble penetration, offense without the ball, free throws, and transition offence efficiency; Position 4--defensive and offensive rebounding efficiency, inside shots, dribble penetration, efficiency of screening, and free throws; Position 5--defensive and offensive rebounding efficiency, inside shots, dribble penetration, efficiency of screening, drawing fouls and three-point plays, and free throws. The research results could be usefully applied by the basketball practitioners to selecting and following-up players, the teching-learning process directing and improving, the training process programming and the transformational effects controlling.     

The effect of the partially restricted sit-to-stand task on biomechanical variables in subjects with and without Parkinson’s disease

The aim of this study was to explore the electromyographic, kinetic and kinematic patterns during a partially restricted sit-to-stand task in subjects with and without Parkinson’s disease (PD). If the trunk is partially restricted, different behavior of torques and muscle activities could be found and it can serve as a reference of the deterioration in the motor performance of subjects with PD. Fifteen subjects participated in this study and electromyography (EMG) activity of the tibialis anterior (TA), soleus (SO), vastus medialis oblique (VMO), biceps femoris (BF) and erector spinae (ES) were recorded and biomechanical variables were calculated during four phases of the movement. Subjects with PD showed more flexion at the ankle, knee and hip joints and increased knee and hip joint torques in comparison to healthy subjects in the final position. However, these joint torques can be explained by the differences in kinematic data. Also, the hip, knee and ankle joint torques were not different in the acceleration phase of movement. The use of a partially restricted sit-to-stand task in PD subjects with moderate involvement leads to the generation of joint torques similar to healthy subjects. This may have important implications for rehabilitation training in PD subjects.     

竞争性抑制的非稳态酶动力学布尔函数图论研究

以非稳戊酶动力学的布尔函数图形方法,来研究一类竞争性抑制的非稳态酶动力学问题,推导出此类反应的百稳态酶动力学方程,并对此动力学方程进行了讨论,分析了此类竞争性抑制酶反应体系的非稳态酶动力学问题。     

Insight into the function of the obturator internus muscle in humans: Observations with development and validation of an electromyography recording technique

There are no direct recordings of obturator internus muscle activity in humans because of difficult access for electromyography (EMG) electrodes. Functions attributed to this muscle are based on speculation and include hip external rotation/abduction, and a role in stabilization as an “adjustable ligament” of the hip. Here we present (1) a technique to insert intramuscular EMG electrodes into obturator internus plus (2) the results of an investigation of obturator internus activity relative to that of nearby hip muscles during voluntary hip efforts in two hip positions and a weight-bearing task. Fine-wire electrodes were inserted with ultrasound guidance into obturator internus, gluteus maximus, piriformis and quadratus femoris in ten participants. Participants performed ramped and maximal isometric hip efforts (open kinetic chain) into flexion/extension, abduction/adduction, and internal/external rotation, and hip rotation to end range in standing. Analysis of the relationship between activity of the obturator internus and the other hip muscles provided evidence of limited contamination of the recordings with crosstalk. Obturator internus EMG amplitude was greatest during hip extension, then external rotation then abduction, with minimal to no activation in other directions. Obturator internus EMG was more commonly the first muscle active during abduction and external rotation than other muscles. This study describes a viable and valid technique to record obturator internus EMG and provides the first evidence of its activation during simple functions. The observation of specificity of activation to certain force directions questions the hypothesis of a general role in hip stabilisation regardless of force direction.     

Instructions limiting the number of steps do not affect the kinetics of the threshold of balance recovery in younger adults

To our knowledge, no one has explored the effect of modifications in balance recovery instructions on the kinetics of the threshold of balance recovery. In particular, the effect of instructions limiting the number of steps on joint torques at the maximum lean angle has not been quantified. We determined the joint torques at the ankle, knee and hip of 28 younger adults recovering balance at their maximum lean angle using: (i) only a single step, (ii) no more than two steps and (iii) no limit on the number of steps. Results showed that instructions limiting the number of steps did not affect peak normalized joint torques by more than 0.0083 or 10Nm except for knee and hip flexion torques from first to second heel strike for the first step leg as well as from second toe-off to heel strike for the second step leg. However, these large differences in peak normalized joint torques after the first step were simply caused by the additional steps used when participants could take more than one step compared to when participants were limited to only a single step. Between the three limits on the number of steps, the kinetics of both legs were nearly identical up to the end of the first step and the additional steps did not help to increase the maximum lean angle. Therefore, we have demonstrated that instructions limiting or not limiting the number of steps appear to be equally valid to study falls in younger adults.     

The influence of knee alignment on lower extremity kinetics during squats

The squat is an assessment of lower extremity alignment during movement, however there is little information regarding altered joint kinetics during poorly performed squats. The purpose of this study was to examine changes in joint kinetics and power from altered knee alignment during a squat. Thirty participants completed squats while displacing the knee medially, anteriorly, and with neutral alignment (control). Sagittal and frontal plane torques at the ankle, knee, and hip were altered in the descending and ascending phase of the squat in both the medial and anterior malaligned squat compared to the control squat. Ankle and trunk power increased and hip power decreased in the medial malaligned squat compared to the control squat. Ankle, knee, and trunk power increased and hip power decreased in the anterior malaligned squat compared to the control squat. Changes in joint torques and power during malaligned squats suggest that altered knee alignment increases ankle and trunk involvement to execute the movement. Increased anterior knee excursion during squatting may also lead to persistent altered loading of the ankle and knee. Sports medicine professionals using the squat for quadriceps strengthening must consider knee alignment to reduce ankle and trunk involvement during the movement.     

Ground reaction forces and lower-limb joint kinetics of turning gait in typically developing children

Turning is a common locomotor task essential to daily activity; however, very little is known about the forces and moments responsible for the kinematic adaptations occurring relative to straight-line gait in typically developing children. Thus, the aims of this study were to analyse ground reaction forces (GRFs), ground reaction free vertical torque (T_Z), and the lower-limb joint kinetics of 90° outside (step) and inside (spin) limb turns. Step, spin, and straight walking trials from fifty-four typically developing children were analysed. All children were fit with the Plug-in Gait and Oxford Foot Model marker sets while walking over force plates embedded in the walkway. Net internal joint moments and power were computed via a standard inverse dynamics approach. All dependent variables were statistically analysed over the entire curves using the mean difference 95% bootstrap confidence band approach. GRFs were directed medially for step turns and laterally for spin turns during the turning phase. Directions were reversed and magnitudes decreased during the approach phase. Step turns showed reduced ankle power generation, while spin turns showed large T_Z. Both strategies required large knee and hip coronal and transverse plane moments during swing. These kinetic differences highlight adaptations required to maintain stability and reorient the body towards the new walking direction during turning. From a clinical perspective, turning gait may better reveal weaknesses and motor control deficits than straight walking in pathological populations, such as children with cerebral palsy, and could potentially be implemented in standard gait analysis sessions.     

Optimizing whole-body kinematics to minimize valgus knee loading during sidestepping: implications for ACL injury risk

The kinematic mechanisms associated with elevated externally applied valgus knee moments during non-contact sidestepping and subsequent anterior cruciate ligament (ACL) injury risk are not well understood. To address this issue, the residual reduction algorithm (RRA) in OpenSim was used to create nine subject-specific, full-body (37 degrees of freedom) torque-driven simulations of athletic males performing unplanned sidestep (UnSS) sport tasks. The RRA was used again to produce an optimized kinematic solution with reduced peak valgus knee torques during the weight acceptance phase of stance. Pre-to-post kinematic optimization, mean peak valgus knee moments were significantly reduced by 44.2 Nm (p=0.045). Nine of a possible 37 upper and lower body kinematic changes in all three planes of motion were consistently used during the RRA to decrease peak valgus knee moments. The generalized kinematic strategy used by all nine simulations to reduce peak valgus knee moments and subsequent ACL injury risk during UnSS was to redirect the whole-body center of mass medially, towards the desired direction of travel.     

Kinetics of cross-slope running

The purpose of the present study was to identify kinetic responses to running on mediolaterally elevated (cross-sloped) running surfaces. Ground reaction forces (GRFs), GRF lever arms and joint moment characteristics of 19 male runners were analyzed when running at 3.5 m/s on a custom-made, tiltable runway. Tilt angles of 3° and 6° for medial and lateral elevation were analyzed using a 10 camera Vicon Nexus system and a force platform. The point of force application of the GRF showed a systematic shift in the order of 1–1.5 cm to either the lateral or medial aspect of the foot for lateral or medial inclinations, respectively. Consequently, the strongest significant effects of tilt orientation and level on joint kinetics and ground reaction force lever arms were identified at the ankle, knee and hip joint in the frontal plane of movement. External eversion moments at the ankle were significantly increased by 35% for 6° of lateral elevation and decreased by 16% for 6° of medial elevation. Altering the cross-slope of the running surface changed the pattern of ankle joint moments in the transversal plane. Effect sizes were on average larger for laterally elevated conditions, indicating a higher sensitivity of kinetic parameters to this kind of surface tilt. These alterations in joint kinetics should be considered in the choice of the running environment, especially for specific risk groups, like runners in rehabilitation processes.     

Females and males use different hip and knee mechanics in response to symmetric military-relevant loads

The purpose of this study was to determine if females and males use different hip and knee mechanics when walking with standardized military-relevant symmetric loads. Fifteen females and fifteen males walked on a treadmill for 2-min at a constant speed under three symmetric load conditions (unloaded: 1.71 kg, medium: 15 kg, heavy: 26 kg). Kinematic and kinetics of the hip and knee were calculated in the sagittal and frontal planes of the dominant limb. In females, hip abduction moments (normalized to total mass) and sagittal knee excursion decreased with increased load (p ≤ 0.024). In males, hip frontal excursion and adduction angle increased with load (p ≤ 0.003). Females had greater peak hip adduction angle than males in the unloaded and medium load conditions (p ≤ 0.036). Across sex, sagittal hip and knee excursion, peak knee extension angle, and peak hip and knee flexion angles increased with increased load (p ≤ 0.005). When normalized to body mass, all peak joint moments increased with each load (p ≤ 0.016) except peak hip adduction moment. When normalized to total mass, peak hip adduction moment and knee flexion, extension, and adduction moments decreased with each load (p < 0.001). While hip frontal plane kinetic alterations to load were only noted in females, kinematic changes were noted in males at the hip and females at the knee. Differences in strategies may increase the risk of hip and knee injuries in females compared to males. This study noted load and sex effects that were previously undetected, highlighting the importance of using military-relevant standardized loads and investigating frontal plane adaptations.     

Influence of optimization constraints in uneven parallel bar dismount swing simulations

Forward dynamics simulations of a dismount preparation swing on the uneven parallel bars were optimized to investigate the sensitivity of dismount revolution potential to the maximum bar force before slipping, and to low-bar avoidance. All optimization constraints were classified as 1-anatomical/physiological; limiting maximum hand force on the high bar before slipping, joint ranges of motion and maximum torques, muscle activation/deactivation timing and 2-geometric; avoiding low-bar contact, and requiring minimum landing distance. The gymnast model included torso/head, arm and two leg segments connected by a planar rotating, compliant shoulder and frictionless ball-and-socket hip joints. Maximum shoulder and hip torques were measured as functions of joint angle and angular velocity. Motions were driven by scaling maximum torques by a joint torque activation function of time which approximated the average activation of all muscles crossing the joint causing extension/flexion, or adduction/abduction. Ten joint torque activation values, and bar release times were optimized to maximize dismount revolutions using the downhill simplex method. Low-bar avoidance and maximum bar-force constraints are necessary because they reduce dismount revolution potential. Compared with the no low-bar performance, optimally avoiding the low bar by piking and straddling (abducting) the hips reduces dismount revolutions by 1.8%. Using previously reported experimentally measured peak uneven bar-force values of 3.6 and 4.0 body weight (BW) as optimization constraints, 1.40 and 1.55 revolutions with the body extended and arms overhead were possible, respectively. The bar-force constraint is not active if larger than 6.9 BW, and instead performances are limited only by maximum shoulder and hip torques. Bar forces accelerate the mass center (CM) when performing muscular work to flex/extend the joints, and increase gymnast mechanical energy. Therefore, the bar-force constraint inherently limits performance by limiting the ability to do work and reducing system energy at bar release.