Functional morphology of bite mechanics in the great barracuda (Sphyraena barracuda)

The great barracuda, Sphyraena barracuda, is a voracious marine predator that captures fish with a swift ram feeding strike. While aspects of its ram feeding kinematics have been examined, an unexamined aspect of their feeding strategy is the bite mechanism used to process prey. Barracuda can attack fish larger than the gape of their jaws, and in order to swallow large prey, can sever their prey into pieces with powerful jaws replete with sharp cutting teeth. Our study examines the functional morphology and biomechanics of 'ram-biting' behavior in great barracuda where the posterior portions of the oral jaws are used to slice through prey. Using fresh fish and preserved museum specimens, we examined the jaw mechanism of an ontogenetic series of barracuda ranging from 20 g to 8.2 kg. Jaw functional morphology was described from dissections of fresh specimens and bite mechanics were determined from jaw morphometrics using the software MandibLever (v3.2). High-speed video of barracuda biting (1500 framess(-1)) revealed that prey are impacted at the corner of the mouth during capture in an orthogonal position where rapid repeated bites and short lateral headshakes result in cutting the prey in two. Predicted dynamic force output of the lower jaw nearly doubles from the tip to the corner of the mouth reaching as high as 58 N in large individuals. A robust palatine bone embedded with large dagger-like teeth opposes the mandible at the rear of the jaws providing for a scissor-like bite capable of shearing through the flesh and bone of its prey.     

The effects of opercular linkage disruption on prey-capture kinematics in the teleost fish Sarotherodon melanotheron

The kinematics of prey capture in blackchin tilapia (Sarotherodon melanotheron) subjected to three experimental treatments (control, anesthetization, and opercular linkage disruption) were analyzed using high-speed video to explore the role of the opercular four-bar linkage in depressing the lower jaw in teleost fishes. A series of two-way mixed model analyses of variance (random effects=fish; fixed effects=treatment) revealed that maximum gape, lower jaw angle, gape cycle, and time to lower jaw depression differed among treatments. Tukey post-hoc comparisons revealed that the opercular linkage disruption treatment differed from the control and anesthetization treatments, suggesting that severing the opercular linkage affected the ability of fish to depress the lower jaw. We hypothesize that although the opercular four-bar linkage system may not be the only linkage mechanism involved in depressing the lower jaw, it plays a very important role in opening the mouth during feeding in teleost fishes.     

Predicting patterns of prey use from morphology of fishes

Synopsis Ecomorphological analyses that search for patterns of association between morphological and prey-use data sets will have a greater chance of understanding the causal relationships between form and diet if the morphological variables used have known consequences for feeding performance. We explore the utility of fish body size, mouth gape and jaw-lever mechanics in predicting patterns of prey use in two very different communities of fishes, Caribbean coral reef fishes, and species of the Centrarchidae that live in Lake Opinicon, Ontario. In spite of major differences in the spectrum of potential prey available, the centrarchids of Lake Opinicon show dietary transitions during ontogeny that are very similar to those seen among and within species of Caribbean groupers (Serranidae). The transition from small zooplankton to intermediate sized invertebrates and ultimately to fishes appears to be very general in ram-suction feeding fishes and is probably driven largely by the constraints of mouth size on prey capture ability. The jaw-lever systems for mouth opening and closing represent direct trade-offs for speed and force of jaw movement. The ratio of in-lever to out-lever in the opening system changes during ontogeny in bluegill, indicating that the mechanics and kinematics of jaw movement may change as well. Among 34 species of Caribbean reef fishes, biting species had jaw-closing ratios that favored force translation, while species that employ rapid-strike ram-suction had closing ratios that enhanced speed of closing and mouth opening ratios that favored a more rapid expansion of the mouth during the strike. We suggest that when prey are categorized into functional groups, reflecting the specific performance features that are important in capturing and handling them, and the differences among habitats in the available prey resource are taken into account, general patterns can be found in morphology-diet relations that cross phylogenetic boundaries.     

Using linkage models to explore skull kinematic diversity and functional convergence in arthrodire placoderms

Biomechanical models offer a powerful set of tools for quantifying the diversity of function across fossil taxa. A computer‐based four‐bar linkage model previously developed to describe the potential feeding kinematics of Dunkleosteus terrelli is applied here to several other arthrodire placoderm taxa from different lineages. Arthrodire placoderms are a group of basal gnathostomes showing one of the earliest diversifications of jaw structures. The linkage model allows biomechanical variation to be compared across taxa, identify trends in skull morphology among arthrodires that potentially influence function and explore the role of linkage systems in the early evolution of jaw structures. The linkage model calculates various kinematic metrics including gape angle, effective mechanical advantage, and kinematic transmission coefficients. Results indicate that the arthrodire feeding system may be more diverse and complex than previously thought. A range of potential kinematic profiles among arthrodire taxa illustrate a diversity of feeding function comparable with modern teleost fishes. Previous estimates of bite force in Dunkleosteus are revised based on new morphological data. High levels of kinematic transmission among arthrodires suggest the potential for rapid gape expansion and possible suction feeding. Morphological comparisons indicate that there were several morphological solutions for obtaining these fast kinematics, which allowed different taxa to achieve similar kinematic profiles while varying other aspects of the feeding apparatus. Mapping of key morphological components of the linkage system on a general placoderm phylogeny illustrates the potential importance of four‐bar systems to the early evolution of jaw structures. J. Morphol. 271:990–1005, 2010. © 2010 Wiley‐Liss, Inc.     

A forceful upper jaw facilitates picking-based prey capture: biomechanics of feeding in a butterflyfish,Chaetodon trichrous

Biomechanical models of feeding mechanisms elucidate how animals capture food in the wild, which, in turn, expands our understanding of their fundamental trophic niche. However, little attention has been given to modeling the protrusible upper jaw apparatus that characterizes many teleost species. We expanded existing biomechanical models to include upper jaw forces using a generalist butterflyfish, Chaetodon trichrous (Chaetodontidae) that produces substantial upper jaw protrusion when feeding on midwater and benthic prey. Laboratory feeding trials for C. trichrous were recorded using high-speed digital imaging; from these sequences we quantified feeding performance parameters to use as inputs for the biomechanical model. According to the model outputs, the upper jaw makes a substantial contribution to the overall forces produced during mouth closing in C. trichrous. Thus, biomechanical models that only consider lower jaw closing forces will underestimate total bite force for this and likely other teleost species. We also quantified and subsequently modeled feeding events for C. trichrous consuming prey from the water column versus picking attached prey from the substrate to investigate whether there is a functional trade-off between prey capture modes. We found that individuals of C. trichrous alter their feeding behavior when consuming different prey types by changing the timing and magnitude of upper and lower jaw movements and that this behavioral modification will affect the forces produced by the jaws during prey capture by dynamically altering the lever mechanics of the jaws. In fact, the slower, lower magnitude movements produced during picking-based prey capture should produce a more forceful bite, which will facilitate feeding on benthic attached prey items, such as corals. Similarities between butterflyfishes and other teleost lineages that also employ picking-based prey capture suggest that a suite of key behavioral and morphological innovations enhances feeding success for benthic attached prey items.     

Ecomorphological relationships among Caribbean tetraodontiform fishes

The anatomy of the oral jaw apparatus, lever-arm mechanics and the diet of six species of Caribbean fishes in the order Tetraodontiformes were investigated to explore the relationships between trophic morphology and feeding habit in these fishes. Tetraodontiforms use their oral jaw apparatus to capture and reduce a broad range of prey types such as plankton, polychaete worms, holothuroids, sea urchins, crabs, molluscs, gorgonians and algae. The different feeding habits of tetraodontiforms are reflected by differences in the morphological and biomechanical features of their oral jaw apparatus that appear to enhance their abilities to feed on hard prey organisms. Species that bite and crush hard, benthic prey organisms had more massive bones and muscles, longer jaw-opening in-levers, and higher jaw-closing lever ratios than the planktivorous, suction-feeding species. Masses of the jaw and suspensorium bones and lower jaw adductor muscles as well as the jaw-opening in-levers and jaw-closing lever ratios of crushers were greater than those of biters. In contrast, the mass of the adductor muscle of the upper jaw did not vary among species with different diets, indicating that this muscle may not be central to the factors that determine patterns of prey use in these fishes. The diversity of feeding behaviours and the wide range of feeding habits among fishes in the order Tetraodontiformes illustrate the versatility of the oral jaw apparatus as a single functional feeding system in fishes.     

Terrestrial feeding in the Mudskipper Periophthalmus (Pisces: Teleostei): A cineradiographic analysis

Mudskipping gobies (Periophthalminae) are among the most terrestrial of amphibious fishes. Specializations associated with terrestrial prey capture and deglutition have been studied in Periophthalmus koelreuteri by light and X-ray cinematography which permits direct visualization of pharyngeal jaw movement during deglutition. Anatomical specializations of the pharyngeal jaws are described and include depressible teeth, a large ventral process on ceratobranchial five, and muscular modifications.
Multiple terrestrial feedings occur by Periophthalmus without a return to the water, and cineradiography reveals that the buccal cavity is often filled with air during terrestrial excursions in contrast to some previous hypotheses. Transport of the prey into the oesophagus occurs primarily by anteroposterior movement of the upper pharyngeal jaw. The lower pharyngeal jaw plays a limited role in food transport and may serve primarily to hold and position prey. The bite between upper and lower pharyngeal jaws occurs between the anterior teeth, and both jaws are protracted together during raking of food into the oesophagus. Functional specializations correlated with terrestrial feeding include obligatory use of pharyngeal jaws for swallowing even small prey items and positioning of the prey in the pharynx by pharyngeal jaw and hyoid movements alone.
This analysis of terrestrial feeding allows hypotheses of design constraints imposed by the aquatic medium on fishes to be raised and tested.     

Estimating maximum bite performance in Tyrannosaurus rex using multi-body dynamics

Bite mechanics and feeding behaviour in Tyrannosaurus rex are controversial. Some contend that a modest bite mechanically limited T. rex to scavenging, while others argue that high bite forces facilitated a predatory mode of life. We use dynamic musculoskeletal models to simulate maximal biting in T. rex. Models predict that adult T. rex generated sustained bite forces of 35 000-57 000 N at a single posterior tooth, by far the highest bite forces estimated for any terrestrial animal. Scaling analyses suggest that adult T. rex had a strong bite for its body size, and that bite performance increased allometrically during ontogeny. Positive allometry in bite performance during growth may have facilitated an ontogenetic change in feeding behaviour in T. rex, associated with an expansion of prey range in adults to include the largest contemporaneous animals.     

Eating without hands or tongue: specialization, elaboration and the evolution of prey processing mechanisms in cartilaginous fishes

The ability to separate edible from inedible portions of prey is integral to feeding. However, this is typically overlooked in favour of prey capture as a driving force in the evolution of vertebrate feeding mechanisms. In processing prey, cartilaginous fishes appear handicapped because they lack the pharyngeal jaws of most bony fishes and the muscular tongue and forelimbs of most tetrapods. We argue that the elaborate cranial muscles of some cartilaginous fishes allow complex prey processing in addition to their usual roles in prey capture. The ability to manipulate prey has evolved twice along different mechanical pathways. Batoid chondrichthyans (rays and relatives) use elaborate lower jaw muscles to process armored benthic prey, separating out energetically useless material. In contrast, megacarnivorous carcharhiniform and lamniform sharks use a diversity of upper jaw muscles to control the jaws while gouging, allowing for reduction of prey much larger than the gape. We suggest experimental methods to test these hypotheses empirically.     

Implications of predatory specialization for cranial form and function in canids

The shape of the cranium varies widely among members of the order Carnivora, but the factors that drive the evolution of differences in shape remain unclear. Selection for increased bite force, bite speed or skull strength may all affect cranial morphology. We investigated the relationship between cranial form and function in the trophically diverse dog family, Canidae, using linear morphometrics and finite element (FE) analyses that simulated the internal and external forces that act on the skull during the act of prey capture and killing. In contrast to previous FE-based studies, we compared models using a newly developed method that removes the effects of size and highlights the relationship between shape and performance. Cranial shape varies among canids based on diet, and different selective forces presumably drove evolution of these phenotypes. The long, narrow jaws of small prey specialists appear to reflect selection for fast jaw closure at the expense of bite force. Generalists have intermediate jaw dimensions and produce moderate bite forces, but their crania are comparable in strength to those of small prey specialists. Canids that take large prey have short, broad jaws, produce the largest bite forces and possess very strong crania. Our FE simulations suggest that the remarkable strength of skulls of large prey specialists reflect the additional ability to resist extrinsic loads that may be encountered while struggling with large prey items.     

Largemouth bass (Micropterus salmoides) switch feeding modalities in response to sensory deprivation

Animals use a suite of sensory modalities to precisely locate and capture prey. While numerous studies have examined the effects of sensory deprivation on the behaviors leading to prey capture and while it is generally believed that information in the pre-strike period determines the way fish capture prey, this study is the first to examine the contribution of sensory information to jaw kinematics during capture. Largemouth bass were filmed using high-speed videography while capturing live mosquitofish. Bass were examined intact, with visual deprivation under infrared light, and with lateral line deprivation following treatment with cobalt chloride. Deprived of visual cues, this visual ram-feeding predator switches towards suction-based feeding to successfully capture prey. They approach prey slowly but open their mouths more rapidly, which has been shown to result in greater buccal pressure, causing their prey to move a greater distance at a more rapid velocity as they are being drawn into the predators' mouths. Deprived of lateral line cues, bass have higher forward velocities during capture and capture prey earlier in the gape cycle. This study demonstrates that sensory pre-strike information directly affects the capture modality employed by fishes and that fish can modulate between ram and suction not only by adjusting the amount of ram by increasing or decreasing their movements, but also by actively increasing the amount of suction used. These results suggest that the ability to modulate feeding behavior may allow animals to not only exploit a broader breadth of prey items, but also to be capable of doing so in a wider variety of environments.     

The effects of intraspecific competition on the prey capture behavior and kinematics of the bluegill sunfish, Lepomis macrochirus

Competition has broad effects on fish and specifically the effects of competition on the prey capture kinematics and behavior are important for the assessment of future prey capture studies in bony fishes. Prey capture kinematics and behavior in bony fishes have been shown to be affected by temperature and satiation. The densities at which bony fish are kept have also been shown to affect their growth, behavior, prey selection, feeding and physiology. We investigated how density induced intraspecific competition for food affects the prey capture kinematics of juvenile bluegill sunfish, Lepomis macrochirus. High speed video was utilized to film five bold individuals feeding at three different densities representing different levels of intraspecific competition. We hypothesized that: (1) the feeding kinematics will be faster at higher levels of competition compared to lower levels of competition, and (2) bluegill should shift from more suction-based feeding towards more ram-based feeding with increasing levels of competition in order to outcompete conspecifics for a prey item. We found that, with increased intraspecific competition, prey capture became faster, involving more rapid jaw opening and therefore greater inertial suction, shorter mouth closing times, and shorter gape cycles. Furthermore, the attack velocity of the fish increased with increasing competition, however a shift towards primarily ram based feeding was not confirmed. Our study demonstrates that prey capture kinematics are affected by the presence of conspecifics and future studies need to consider the effects of competition on prey capture kinematics.     

Linking cranial morphology to prey capture kinematics in three cleaner wrasses: Labroides dimidiatus,Larabicus quadrilineatus,and Thalassoma lutescens

Cleaner fishes are well known for removing and consuming ectoparasites off other taxa. Observers have noted that cleaners continuously “pick” ectoparasites from the bodies of their respective client organisms, but little is known about the kinematics of cleaning. While a recent study described the jaw morphology of cleaners as having small jaw‐closing muscles and weak bite forces, it is unknown how these traits translate into jaw movements during feeding to capture and remove ectoparasites embedded in their clients. Here, we describe cranial morphology and kinematic patterns of feeding for three species of cleaner wrasses. Through high‐speed videography of cleaner fishes feeding in two experimental treatments, we document prey capture kinematic profiles for Labroides dimidiatus, Larabicus quadrilineatus, and Thalassoma lutescens. Our results indicate that cleaning in labrids may be associated with the ability to perform low‐displacement, fast jaw movements that allow for rapid and multiple gape cycles on individually targeted items. Finally, while the feeding kinematics of cleaners show notable similarities to those of “picker” cyprinodontiforms, we find key differences in the timing of events. In fact, cleaners generally seem to be able to capture prey twice as fast as cyprinodontiforms. We thus suggest that the kinematic patterns exhibited by cleaners are indicative of picking behavior, but that “pickers” may be more kinematically diverse than previously thought. J. Morphol. 276:1377–1391, 2015. © 2015 Wiley Periodicals, Inc.     

Micro- and macroevolutionary decoupling of cichlid jaws: a test of Liem's key innovation hypothesis

The extent to which elements of functional systems can change independently (modularity) likely influences the diversification of lineages. Major innovations in organismal design, like the pharyngeal jaw in cichlid fishes, may be key to a group's success when they relax constraints on diversification by increasing phenotypic modularity. In cichlid fishes, pharyngeal jaw modifications that enhanced the ability to breakdown prey may have freed their oral jaws from serving their ancestral dual role as a site of both prey capture and prey processing. This functional decoupling that allowed the oral jaws to become devoted solely to prey capture has been hypothesized to have permitted the two sets of cichlid jaws to evolve independently. We tested the hypothesis that oral and pharyngeal jaw mechanics are evolutionarily decoupled both within and among Neotropical Heroine cichlids. In the trophically polymorphic species Herichthys minckleyi, molariforms that exhibit enlarged molarlike pharyngeal jaw teeth were found to have approximately 400% greater lower jaw mass compared to H. minckleyi with the alternative papilliform pharyngeal morphology. However, oral jaw gape, lower jaw velocity ratios, anterior jaw linkage mechanics, and jaw protrusion did not differ between the morphotypes. In 40 other Heroine species, there was a weak correlation between oral jaw mechanics and pharyngeal jaw mass when phylogenetic history was ignored. Yet, after expansion of the cytochrome b phylogeny for Heroines, change in oral jaw mechanics was found to be independent of evolutionary change in pharyngeal jaw mass based on independent contrasts. Evolutionary decoupling of oral and pharyngeal jaw mechanics has likely played a critical role in the unparalleled trophic diversification of cichlid fishes.     

Morphological and functional bases of durophagy in the queen triggerfish,Balistes vetula (Pisces,tetraodontiformes)

Tetraodontiform fishes are characterized by jaws specialized for powerful biting and a diet dominated by hard-shelled prey. Strong biting by the oral jaws is an unusual feature among teleosts. We present a functional morphological analysis of the feeding mechanism of a representative tetraodontiform, Balistes vetula. As is typical for the order, long, sharp, strong teeth are mounted on the short, robust jaw bones of B. vetula. The neurocranium and suspensorium are enlarged and strengthened to serve as sites of attachment for the greatly hypertrophied adductor mandibulae muscles. Electromyographic recordings made from 11 cranial muscles during feeding revealed four distinct behaviors in the feeding repertoire of B. vetula. Suction is used effectively to capture soft prey and is associated with a motor pattern similar to that reported for many other teleosts. However, when feeding on hard prey, B. vetula directly bit the prey, exhibiting a motor pattern very different from that of suction feeding. During buccal manipulation, repeated cycles of jaw opening and closing (biting) were coupled with rapid movement of the prey in and out of the mouth. Muscle activity during buccal manipulation was similar to that seen during bite-captures. A blowing behavior was periodically employed during prey handling, as prey were forcefully “spit out” from the mouth, either to reposition them or to separate unwanted material from flesh. The motor pattern used during blowing was distinct from similar behaviors described for other fishes, indicating that this behaviors may be unique to tetraodontiforms. Thus B. vetula combines primitive behaviors and motor patterns (suction feeding and buccal manipulation) with specialized morphology (strong teeth, robust jaws, and hypertrophied adductor muscles) and a novel behavior (blowing) to exploit armored prey such as sea urchins molluscs, and crabs. © 1993 Wiley-Liss, Inc.     

Advances in the Study of Feeding Behaviors, Mechanisms, and Mechanics of Sharks

Sharks as a group have a long history as highly successful predatory fishes. Although, the number of recent studies on their diet, feeding behavior, feeding mechanism, and mechanics have increased, many areas still require additional investigation. Dietary studies of sharks are generally more abundant than those on feeding activity patterns, and most of the studies are confined to relatively few species, many being carcharhiniform sharks. These studies reveal that sharks are generally asynchronous opportunistic feeders on the most abundant prey item, which are primarily other fishes. Studies of natural feeding behavior are few and many observations of feeding behavior are based on anecdotal reports. To capture their prey sharks either ram, suction, bite, filter, or use a combination of these behaviors. Foraging may be solitary or aggregate, and while cooperative foraging has been hypothesized it has not been conclusively demonstrated. Studies on the anatomy of the feeding mechanism are abundant and thorough, and far exceed the number of functional studies. Many of these studies have investigated the functional role of morphological features such as the protrusible upper jaw, but only recently have we begun to interpret the mechanics of the feeding apparatus and how it affects feeding behavior. Teeth are represented in the fossil record and are readily available in extant sharks. Therefore much is known about their morphology but again functional studies are primarily theoretical and await experimental analysis. Recent mechanistic approaches to the study of prey capture have revealed that kinematic and motor patterns are conserved in many species and that the ability to modulate feeding behavior varies greatly among taxa. In addition, the relationship of jaw suspension to feeding behavior is not as clear as was once believed, and contrary to previous interpretations upper jaw protrusibility appears to be related to the morphology of the upper jaw-chondrocranial articulation rather than the type of jaw suspension. Finally, we propose a set of specific hypotheses including: (1) The functional specialization for suction feeding hypothesis that morphological and functional specialization for suction feeding has repeatedly arisen in numerous elasmobranch lineages, (2) The aquatic suction feeding functional convergence hypothesis that similar hydrodynamic constraints in bony fishes and sharks result in convergent morphological and functional specializations for suction feeding in both groups, (3) The feeding modulation hypothesis that suction capture events in sharks are more stereotyped and therefore less modulated compared to ram and bite capture events, and (4) The independence of jaw suspension and feeding behavior hypothesis whereby the traditional categorization of jaw suspension types in sharks is not a good predictor of jaw mobility and prey capture behavior. Together with a set of questions these hypotheses help to guide future research on the feeding biology of sharks.     

Mechanics of biting in great white and sandtiger sharks

Although a strong correlation between jaw mechanics and prey selection has been demonstrated in bony fishes (Osteichthyes), how jaw mechanics influence feeding performance in cartilaginous fishes (Chondrichthyes) remains unknown. Hence, tooth shape has been regarded as a primary predictor of feeding behavior in sharks. Here we apply Finite Element Analysis (FEA) to examine form and function in the jaws of two threatened shark species, the great white (Carcharodon carcharias) and the sandtiger (Carcharias taurus). These species possess characteristic tooth shapes believed to reflect dietary preferences. We show that the jaws of sandtigers and great whites are adapted for rapid closure and generation of maximum bite force, respectively, and that these functional differences are consistent with diet and dentition. Our results suggest that in both taxa, insertion of jaw adductor muscles on a central tendon functions to straighten and sustain muscle fibers to nearly orthogonal insertion angles as the mouth opens. We argue that this jaw muscle arrangement allows high bite forces to be maintained across a wider range of gape angles than observed in mammalian models. Finally, our data suggest that the jaws of sub-adult great whites are mechanically vulnerable when handling large prey. In addition to ontogenetic changes in dentition, further mineralization of the jaws may be required to effectively feed on marine mammals. Our study is the first comparative FEA of the jaws for any fish species. Results highlight the potential of FEA for testing previously intractable questions regarding feeding mechanisms in sharks and other vertebrates.     

A dynamic model of mouth closing movements in clariid catfishes: the role of enlarged jaw adductors

Some species of Clariidae (air breathing catfishes) have extremely large (hypertrophied) jaw closure muscles. Besides producing higher bite forces, the enlarged muscles may also cause higher accelerations of the lower jaw during rapid mouth closure. Thus, jaw adductor hypertrophy could potentially also enable faster mouth closure. In this study, a forward dynamic model of jaw closing is developed to evaluate the importance of jaw adductor hypertrophy on the speed of mouth closure. The model includes inertia, pressure, tissue resistance and hydrodynamic drag forces on the lower jaw, which is modelled as a rotating half-ellipse. Simulations are run for four clariid species showing a gradual increase in jaw adductor hypertrophy (Clarias gariepinus, Clariallabes longicauda, Gymnallabes typus and Channallabes apus). The model was validated using data from high-speed videos of prey captures in these species. In general, the kinematic profiles of the fastest mouth closure from each species are reasonably well predicted by the model. The model was also used to compare the four species during standardized mouth closures (same initial gape angle, travel distance and cranial size). These simulations suggest that the species with enlarged jaw adductors have an increased speed of jaw closure (in comparison with the non-hypertrophied C. gariepinus) for short lower jaw rotations and when feeding at high gape angles. Consequently, the jaw system in these species seems well equipped to capture relatively large, evasive prey. For prey captures during which the lower jaw rotates freely over a larger distance before impacting the prey, the higher kinematic efficiency of the C. gariepinus jaw system results in the fastest jaw closures. In all cases, the model predicts that an increase in the physiological cross-sectional area of the jaw muscles does indeed contribute to the speed of jaw closure in clariid fish.     

The Effects of Satiation on Strike Mode and Prey Capture Kinematics in the Largemouth bass, Micropterus salmoides

The feeding mechanism and kinematics of prey capture have been studied in many fishes. However, the effects of satiation on the strike mode and prey capture kinematics have never been directly measured. We analyze 12 kinematic variables to determine the effects of satiation on prey capture in five largemouth bass, Micropterus salmoides, by using high speed videography. We also present the first experimental test for modulatory capabilities in response to satiation, by using the ram-suction index. Significant changes in the kinematic variables of maximum lower jaw depression, maximum gape distance, maximum hyoid depression, time to maximum hyoid depression, and time from maximum hyoid depression to recovery were seen with the effects of satiation. Change in the kinematic variables imply a decrease in jaw opening velocity and the magnitude of suction velocity created during repetitive strikes by M. salmoides with increasing satiation. The bass primarily uses a ram strike mode, with some suction bites occasionally. Ram-suction index analyses suggests that M. salmoides does not modulate strike mode in response to satiation. However, the bass modulate prey capture kinematics without altering strike mode with the effects of satiation. Prey capture success decreases in each bass, as the probability of a successful prey capture event becomes lower, with increasing satiation. These findings demonstrate that satiation can have major effects on prey capture kinematics and future studies of feeding kinematics should account for satiation in their analyses.     

Functional morphology of the cranio‐mandibular complex of the Guira cuckoo (Aves)

The cranio‐mandibular complex is an important structure involved in food capture and processing. Its morphology is related to the nature of the food item. Jaw muscles enable the motion of this complex and their study is essential for functional and evolutionary analysis. The present study compares available behavioral and dietary data obtained from the literature with novel results from functional morphological analyses of the cranio‐mandibular complex of the Guira cuckoo (Guira guira) to understand its relationship with the zoophagous trophic habit of this species. The bite force was estimated based on muscle dissections, measurements of the physiological cross‐sectional area, and biomechanical modeling of the skull. The results were compared with the available functional morphological data for other birds. The standardized bite force of G. guira is higher than predicted for exclusively zoophagous birds, but lower than for granivorous and/or omnivorous birds. Guira guira possesses the generalized jaw muscular system of neognathous birds, but some features can be related to its trophic habit. The external adductor muscles act mainly during food item processing and multiple aspects of this muscle group are interpreted to increase bite force, that is, their high values of muscle mass, their mechanical advantage (MA), and their perpendicular orientation when the beak is closed. The m. depressor mandibulae and the m. pterygoideus dorsalis et ventralis are interpreted to prioritize speed of action (low MA values), being most important during prey capture. The supposed ecological significance of these traits is the potential to widen the range of prey size that can be processed and the possibility of rapidly capturing agile prey through changes in the leverage of the muscles involved in opening and closing of the bill. This contributes to the trophic versatility of the species and its ability to thrive in different habitats, including urban areas.