Determination of microbial genome sizes by two-dimensional denaturing gradient gel electrophoresis.

In two-dimensional denaturing gradient gel electrophoresis, DNA is digested with a restriction endonuclease and the resulting DNA fragments are separated as a function of size by conventional agarose gel electrophoresis. Following this first dimension electrophoresis, the fragment distribution is placed at the top of a denaturing gradient slab gel and electrophoresis is carried out parallel to the gradient direction. This second dimension separation is a complex function of the base sequence of each fragment. Analysis of the DNA fragment distribution as a function of fragment size allows the DNA size to be calculated. This method has been applied to calculate three microbial genome sizes: Mycoplasma capricolum, 724 kb; Acholeplasma laidlawii, 1646 kb; and Hemophilus influenzae, 1833 kb.     

Detecting base pair substitutions in DNA fragments by temperature-gradient gel electrophoresis.

A vertical gel electrophoresis apparatus is described which can distinguish DNA fragments differing by single base pair substitutions. The system employs a homogenous polyacrylamide gel containing urea-formamide and a temperature gradient which runs either perpendicular or parallel to the direction of electrophoresis. The temperature-gradient system simplifies several features of the denaturant-gradient system (1) and is relatively inexpensive to construct. Eight homologous 373 bp DNAs differing by one, two, or nine base pair substitutions were examined. DNA electrophoretic mobility changed abruptly with the temperature induced unwinding of DNA domains. GC to AT substitutions at different locations within the first melting domain, as well as an AT to TA transversion were separated with temperature gradients parallel to the electrophoretic direction. The relative stabilities of the DNAs observed in the gels were compared to predictions of DNA melting theory. General agreement was observed however complete correspondence was not obtained.     

Design and application of 2-D DGGE-based gene mutational scanning tests

Currently, there is a need for practical, accurate and cost-efficient tests to comprehensively scan human genes for disease-related DNA sequence variation. Two-dimensional gene scanning (TDGS) is a parallel mutation detection system, based on a combination of extensive multiplex PCR amplification (‘PCR megaplex’) and two-dimensional (2-D) DNA electrophoresis. The latter comprises a size separation step followed by denaturing gradient gel electrophoresis (DGGE), and allows single base pair changes to be distinguished among multiple DNA fragments in parallel. Here, we describe the rapid design of TDGS tests and its application to mutation identification in several large human cancer genes.     

Application of constant denaturant capillary electrophoresis (CDCE) to mutation detection in humans

Constant denaturant electrophoresis is a DNA separation technique based on the principle of cooperative melting equilibrium. DNA sequences with distinct high and low melting domains can be utilized to separate and identify molecules differing by only one base pair in the lower melting domain. Combined with capillary gel electrophoresis and when coupled with high fidelity DNA amplification, this approach can detect mutants at a fraction of 10⁻⁶. Modifications to the capillary elecctrophoretic system have also increased DNA loading capacity which allows for analysis of rare mutations in a large, heterogeneous population such as DNA samples derived from human tissues. Employment of this technology has determined the first mutational spectrum in human cells and tissues in a mitochondrial sequence without phenotypic selection of mutants.     

Alterations in DNA helix stability due to base modifications can be evaluated using denaturing gradient gel electrophoresis

DNA molecules that differ by a single base-pair can be separated by denaturing gradient gel electrophoresis due to the sequence-specific melting properties of DNA. Base modifications such as methylation are also known to affect the melting temperature of DNA. We examined the final position of DNA fragments containing either 5-methyl-cytosine or 6-methyl-adenine in denaturing gradient gels. The presence of a single methylated base within an early melting domain resulted in a well-resolved shift in fragment position relative to the unmethylated sequence. In addition, fragments containing hemimethylated and fully methylated sites could be distinguished, and a proportionally larger shift was observed with an increasing number of methylated bases. Denaturing gradient gel electrophoresis thus provides a sensitive method for analyzing the methylation state of DNA, which is not dependent on the presence of restriction enzyme cleavage sites. We also demonstrate that denaturing gradient gel electrophoresis can be used to obtain a quantitative estimate of the change in helix stability caused by modification of one or two bases in a complex DNA sequence. Such estimates should allow more accurate modeling of melting of natural DNA sequences.     

AT base pairs are less stable than GC base pairs in Z-DNA: The crystal structure of d(m5CGTAm5CG)

Two hexanucleoside pentaphosphates, 5-methyl and 5-bromo cytosine derivatives of d(CpGpTp-ApCpG) have been synthesized, crystallized, and their three-dimensional structure solved. They both form left-handed Z-DNA and the methylated derivative has been refined to 1.2 Å resolution. These are the first crystal Z-DNA structures that contain AT base pairs. The overall form of the molecule is very similar to that of the unmethylated or the fully methylated (dC-dG)₃ hexamer although there are slight changes in base stacking. However, significant differences are found in the hydration of the helical groove. When GC base pairs are present, the helical groove is systematically filled with two water molecules per base pair hydrogen bonded to the bases. Both of these water molecules are not seen in the electron density map in the segments of the helix containing AT base pairs, probably because of solvent disorder. This could be one of the features that makes AT base pairs form Z-DNA less readily than GC base pairs.     

温度梯度凝胶电泳技术及应用

温度梯度凝胶电泳（TGGE）是一种用于检测核酸序列变异和点突变的电泳方法.该法利用不同构象的核酸分子具有不同的变性温度（T_m)来进行分离.TGGE方法具有分辨能力高、重复性好和节省时间的特点,可广泛应用于分子生物学研究领域.     

An apparent discrepancy between chain length and electrophoretic mobility of restriction fragments: a case of human mitochondrial DNA

Summary DNA sequence analysis and electrophoresis in denaturing gel revealed that a 60 base pair insertion which had been previously postulated on the basis of native polyacrylamide gel electrophoresis of mitochondrial DNA from Japanese (Horai and Matsunaga 1986) did not exist at all. Unusual behavior of certain restriction fragments in native polyacrylamide gels apparently resulted in what appeared to be an insertion. Further study revealed that this behavior is most likely due to secondary structures of the fragments. The results of the present study suggest that adequate care should be taken when assessing molecular weights of restriction fragments by native polyacrylamide gel electrophoresis.     

Parallel-stranded DNA with mixed AT/GC composition: role of trans G.C base pairs in sequence dependent helical stability

Parallel-stranded (ps) DNAs with mixed AT/GC content comprising G.C pairs in a varying sequence context have been investigated. Oligonucleotides were devised consisting of two 10-nt strands complementary either in a parallel or in an antiparallel orientation and joined via nonnucleotide linkers so as to form 10-bp ps or aps hairpins. A predominance of intramolecular hairpins over intermolecular duplexes was achieved by choice of experimental conditions and verified by fluorescence determinations yielding estimations of rotational relaxation times and fractional base pairing. A multistate mode of ps hairpin melting was revealed by temperature gradient gel electrophoresis (TGGE). The thermal stability of the ps hairpins with mixed AT/GC content depends strongly on the specific sequence in a manner peculiar to the ps double helix. The thermodynamic effects of incorporating trans G.C base pairs into an AT sequence are context-dependent: an isolated G. C base pair destabilizes the duplex whereas a block of > or =2 consecutive G.C base pairs exerts a stabilizing effect. A multistate heterogeneous zipper model for the thermal denaturation of the hairpins was derived and used in a global minimization procedure to compute the thermodynamic parameters of the ps hairpins from experimental melting data. In 0.1 M LiCl at 3 degrees C, the formation of a trans G.C pair in a GG/CC sequence context is approximately 3 kJ mol(-)(1) more favorable than the formation of a trans A.T pair in an AT/TA sequence context. However, GC/AT contacts contribute a substantial unfavorable free energy difference of approximately 2 kJ mol(-)(1). As a consequence, the base composition and fractional distribution of isolated and clustered G.C base pairs determine the overall stability of ps-DNA with mixed AT/GC sequences. Thus, the stability of ps-DNA comprising successive > or =2 G.C base pairs is greater than that of ps-DNA with an alternating AT sequence, whereas increasing the number of AT/GC contacts by isolating G.C base pairs exerts a destabilizing effect on the ps duplex. Molecular modeling of the various helices by force field techniques provides insight into the structural basis for these distinctions.     

The A--B transition: temperature and base composition effects on hydration of DNA

Natural DNAs and some polynucleotides organised in fiber present the A--B form transition at a relative humidity (r.h.) which depends on the temperature. A shift of the midpoint of that helix--helix transition to higher r.h. values is observed when the temperature is risen. It is shown that the average number of water molecules associated to a nucleotide pair is the relevant parameter for the A-B transition and that this parameter can be given a precise value by a combination of different r.h. and temperature values. The minimum number of water molecules necessary to get the B form depends on the base composition of the DNA. It is observed that AT base pairs have a higher affinity toward water molecules than GC base pairs. In the B form there are 27 water molecules per GC nucleotide pair and 44 per AT pair. Moreover, we noted that the fraction of nucleotides in the B form as a function of the average number of water molecules associated per base pair does not depend on the temperature. The A helical form is obtained with about 11 water molecules per nucleotide pair and this number is not very sensitive to the base composition of DNA.     

Comprehensive detection of single base changes in human genomic DNA using denaturing gradient gel electrophoresis and a GC clamp

We present a simple, efficient extension of denaturing gradient gel electrophoresis that allows the detection of nearly any sequence change in a defined fragment of DNA. The fragment can be obtained either by means of the polymerase chain reaction or by restriction digestion of genomic DNA. With restriction fragments of genomic DNA, sequence information is not required, and covalent modifications in genomic DNA that are lost in a PCR, such as methylation, are detectable. We describe how a GC clamp (an arbitrary, G+C-rich sequence of 30 to 60 bp) can be attached to a selected restriction fragment present in a digest of genomic DNA. The GC clamp alters the melting properties of the fragment; this change greatly increases the fraction of possible mutations that is detectable. In a 272-bp HaeIII fragment from the human beta-globin gene, we were able to detect 13 of 13 mutations tested in human genomic DNA. Four additional mutations in cloned plasmids were analyzed. The data agree with a simple theoretical model for DGGE, which predicts how two fragments, differing at a single (specified) base pair, are resolved in a gradient gel as a function of running time for the gel. The calculation assists in the design of probes and gel conditions that aid in the detection of sequence changes.     

New rapid methods for DNA sequencing based in exonuclease III digestion followed by repair synthesis.

We describe improve enzymatic methods for sequencing method for sequencing DNA. They are based on partial digestion of duplex DNA with exonuclease III to produce DNA molecules with 3' ends shortened to varying lengths, followed by repair synthesis to extend and label the 3' ends. After asymmetrical cleavage of the DNA with a restriction enzyme, the labeled products are separated by gel electrophoresis and the sequence read from the autoradiogram. The entire procedures, beginning with unrestricted DNA and followed through gel electrophoresis, takes only one day for sequencing both strands of the DNA molecule. These methods are especially suitable for sequencing DNA cloned in plasmid vectors, and they greatly extend the usefulness of the dideoxynucleotide chain termination method of Sanger et al. (Proc. Natl. Acad. Sci. USA 74, 5463, 1977). Using these methods we have determined the sequence of a 410 base pair fragment which includes the yeast SUP3 tyrosine tRNA gene.     

Base pair opening in three DNA-unwinding elements

DNA-unwinding elements are specific base sequences that are located in the origin of DNA replication where they provide the start point for strand separation and unwinding of the DNA double helix. In the present work we have obtained the first characterization of the opening of individual base pairs in DNA-unwinding elements. The three DNA molecules investigated reproduce the 13-mer DNA-unwinding elements present in the Escherichia coli chromosome. The base sequences of the three 13-mers are conserved in the origins of replication of enteric bacterial chromosomes. The exchange of imino protons with solvent protons was measured for each DNA as a function of the concentration of exchange catalyst using nuclear magnetic resonance spectroscopy. The exchange rates provided the rates and the equilibrium constants for opening of individual base pairs in each DNA at 20 degrees C. The results reveal that the kinetics and energetics of the opening reactions for AT/TA base pairs are different in the three DNA-unwinding elements due to long range effects of the base sequence. These differences encompass the AT/TA base pairs that are conserved in various bacterial genomes. Furthermore, a qualitative correlation is observed between the kinetics and energetics of opening of AT/TA base pairs and the location of the corresponding DNA-unwinding element in the origin of DNA replication.     

Studies of base pair sequence effects on DNA solvation based on all-atom molecular dynamics simulations

Detailed analyses of the sequence-dependent solvation and ion atmosphere of DNA are presented based on molecular dynamics (MD) simulations on all the 136 unique tetranucleotide steps obtained by the ABC consortium using the AMBER suite of programs. Significant sequence effects on solvation and ion localization were observed in these simulations. The results were compared to essentially all known experimental data on the subject. Proximity analysis was employed to highlight the sequence dependent differences in solvation and ion localization properties in the grooves of DNA. Comparison of the MD-calculated DNA structure with canonical A- and B-forms supports the idea that the G/C-rich sequences are closer to canonical A- than B-form structures, while the reverse is true for the poly A sequences, with the exception of the alternating ATAT sequence. Analysis of hydration density maps reveals that the flexibility of solute molecule has a significant effect on the nature of observed hydration. Energetic analysis of solute-solvent interactions based on proximity analysis of solvent reveals that the GC or CG base pairs interact more strongly with water molecules in the minor groove of DNA that the AT or TA base pairs, while the interactions of the AT or TA pairs in the major groove are stronger than those of the GC or CG pairs. Computation of solvent-accessible surface area of the nucleotide units in the simulated trajectories reveals that the similarity with results derived from analysis of a database of crystallographic structures is excellent. The MD trajectories tend to follow Manning's counterion condensation theory, presenting a region of condensed counterions within a radius of about 17 A from the DNA surface independent of sequence. The GC and CG pairs tend to associate with cations in the major groove of the DNA structure to a greater extent than the AT and TA pairs. Cation association is more frequent in the minor groove of AT than the GC pairs. In general, the observed water and ion atmosphere around the DNA sequences is the MD simulation is in good agreement with experimental observations.     

Structural principles of B-DNA grooves hydration in fibers as revealed by Monte Carlo simulations and X-ray diffraction

Being interested in possible effects of sequence-dependent hydration of B-DNA with mixed sequence in fibers, we performed a series of Monte Carlo calculations of hydration of polydeoxyribonucleotides in B form, considering all sequences with dinucleotide repeat. The computational results allow the ten base-stacking types to be classified in accordance with their primary hydration in the minor groove. As a rule, the minor groove is occupied by two water molecules per base pair in the depth of the groove, which are located nearly midway between the planes of successive base pairs and symmetrically according to the dyad there. The primary hydration of the major groove depends on the type of the given base pair. The coordinates of 3 water molecules per base pair in the depth of the major groove are determined by the type of this pair together with its position and orientation in the helix, and are practically independent on the adjacent base pairs. A/T-homopolymer tracts do not fit into this hydration pattern; the base pair edges are hydrated autonomously in both grooves. Analysis of the Li-B-DNA x-ray diffraction intensities reveals those two water positions in the minor groove. In the major groove, no electronic density peaks in sufficient distance from the base edges were found, thus confirming the absence of any helical invariance of primary hydration in this region. With the help of the rules proposed in this paper it is possible to position the water molecules of the first hydration shell in the grooves of canonical B-DNA for any given sequence.     

Modification of the melting properties of duplex DNA by attachment of a GC-rich DNA sequence as determined by denaturing gradient gel electrophoresis.

The melting behavior of a DNA fragment carrying the mouse beta maj-globin promoter was investigated as a means of establishing procedures for separating DNA fragments differing by any single base substitution using the denaturing gradient gel electrophoresis procedure of Fischer and Lerman (1,2). We find that attachment of a 300 base pair GC-rich DNA sequence, termed a GC-clamp, to a 135 bp DNA fragment carrying the mouse beta-globin promoter significantly alters the pattern of DNA melting within the promoter. When the promoter is attached to the clamp, the promoter sequences melt without undergoing strand dissociation. The calculated distribution of melting domains within the promoter differs markedly according to the relative orientation of the clamp and promoter sequences. We find that the behavior of DNA fragments containing the promoter and clamp sequences on denaturing gradient polyacrylamide gels is in close agreement with the theoretical melting calculations. These studies provide the basis for critical evaluation of the parameters for DNA melting calculations, and they establish conditions for determining whether all single base substitutions within the promoter can be separated on denaturing gradient gels.     

Agarose Gel Electrophoresis for the Separation of DNA Fragments

Agarose gel electrophoresis is the most effective way of separating DNA fragments of varying sizes ranging from 100 bp to 25 kb¹. Agarose is isolated from the seaweed genera Gelidium and Gracilaria, and consists of repeated agarobiose (L- and D-galactose) subunits². During gelation, agarose polymers associate non-covalently and form a network of bundles whose pore sizes determine a gel''s molecular sieving properties. The use of agarose gel electrophoresis revolutionized the separation of DNA. Prior to the adoption of agarose gels, DNA was primarily separated using sucrose density gradient centrifugation, which only provided an approximation of size. To separate DNA using agarose gel electrophoresis, the DNA is loaded into pre-cast wells in the gel and a current applied. The phosphate backbone of the DNA (and RNA) molecule is negatively charged, therefore when placed in an electric field, DNA fragments will migrate to the positively charged anode. Because DNA has a uniform mass/charge ratio, DNA molecules are separated by size within an agarose gel in a pattern such that the distance traveled is inversely proportional to the log of its molecular weight³. The leading model for DNA movement through an agarose gel is "biased reptation", whereby the leading edge moves forward and pulls the rest of the molecule along⁴. The rate of migration of a DNA molecule through a gel is determined by the following: 1) size of DNA molecule; 2) agarose concentration; 3) DNA conformation⁵; 4) voltage applied, 5) presence of ethidium bromide, 6) type of agarose and 7) electrophoresis buffer. After separation, the DNA molecules can be visualized under uv light after staining with an appropriate dye. By following this protocol, students should be able to: 1. Understand the mechanism by which DNA fragments are separated within a gel matrix 2. Understand how conformation of the DNA molecule will determine its mobility through a gel matrix 3. Identify an agarose solution of appropriate concentration for their needs 4. Prepare an agarose gel for electrophoresis of DNA samples 5. Set up the gel electrophoresis apparatus and power supply 6. Select an appropriate voltage for the separation of DNA fragments 7. Understand the mechanism by which ethidium bromide allows for the visualization of DNA bands 8. Determine the sizes of separated DNA fragments       

Nearly all single base substitutions in DNA fragments joined to a GC-clamp can be detected by denaturing gradient gel electrophoresis.

Duplex DNA fragments differing by single base substitutions can be separated by electrophoresis in denaturing gradient polyacrylamide gels, but only substitutions in a restricted part of the molecule lead to a separation (1). In an effort to circumvent this problem, we demonstrated that the melting properties and electrophoretic behavior of a 135 base pair DNA fragment containing a beta-globin promoter are changed by attaching a GC-rich sequence, called a 'GC-clamp' (2). We predicted that these changes should make it possible to resolve most, if not all, single base substitutions within fragments attached to the clamp. To test this possibility we examined the effect of several different single base substitutions on the electrophoretic behavior of the beta-globin promoter fragment in denaturing gradient gels. We find that the GC-clamp allows the separation of fragments containing substitutions throughout the promoter fragment. Many of these substitutions do not lead to a separation when the fragment is not attached to the clamp. Theoretical calculations and analysis of a large number of different mutations indicate that approximately 95% of all possible single base substitutions should be separable when attached to a GC-clamp.     

Hydration of short DNA, RNA and 2'-OMe oligonucleotides determined by osmotic stressing

Studies on hydration are important for better understanding of structure and function of nucleic acids. We compared the hydration of self-complementary DNA, RNA and 2′-O-methyl (2′-OMe) oligonucleotides GCGAAUUCGC, (UA)₆ and (CG)₃ using the osmotic stressing method. The number of water molecules released upon melting of oligonucleotide duplexes, Δn_W, was calculated from the dependence of melting temperature on water activity and the enthalpy, both measured with UV thermal melting experiments. The water activity was changed by addition of ethylene glycol, glycerol and acetamide as small organic co-solutes. The Δn_W was 3–4 for RNA duplexes and 2–3 for DNA and 2′-OMe duplexes. Thus, the RNA duplexes were hydrated more than the DNA and the 2′-OMe oligonucleotide duplexes by approximately one to two water molecules depending on the sequence. Consistent with previous studies, GC base pairs were hydrated more than AU pairs in RNA, whereas in DNA and 2′-OMe oligonucleotides the difference in hydration between these two base pairs was relatively small. Our data suggest that the better hydration of RNA contributes to the increased enthalpic stability of RNA duplexes compared with DNA duplexes.