Characterization of the gene products produced in minicells by pSM1, a derivative of R100

Summary At least ten polypeptides larger than 6 kilodaltons (K) are produced in minicells from the miniplasmid pSM1 in vivo. pSM1 (5804 bp) is a small derivative of the drug resistance plasmid R100 (ca. 90 kb) and carries the R100 essential replication region as well as some non-essential functions. Cloned restriction fragments of pSM1 and plasmids with deletions within pSM1 sequences were used to assign eight of the ten oberserved polypeptides to specific coding regions of pSM1. Two of these polypeptides were identified as RepA1 and RepA2, proteins encoded by the essential replication region of pSM1/R100. The nucleotide sequence consisting of 885 bp outside the essential replication region is presented here. This sequence contains an open reading frame,orf4, for a protein 22.9 K in size, and one of the pSM1-encoded polypeptides was identified as theorf4 gene product. Five additional polypeptides were shown to be the products of other open reading frames mapping outside the essential replication region. Specific functions have been assigned to four of these polypeptides and tentatively to the fifth.     

Isolation and sequencing of the replication region of plasmid pBFp1 isolated from a marine biofilm

A 24 kb plasmid, pBFp1, encoding mercury resistance was previously isolated from a marine biofilm. Isolation and sequencing of a 4280 bp DNA fragment containing the plasmid replicon (rep-pBFp1) revealed a putative open reading frame encoding a RepA protein and an oriV-like region containing an A+T rich sub-region, iterons, and DnaA boxes. Sequence comparisons showed significant similarities to the incW plasmid pSa both for the RepA amino acid sequence and in the iteron DNA sequence. Plasmid pBFp1 was also shown to be incompatible with pSa in standard incompatibility testing. A probe from the repA gene of pBFp1 was further made and tested on a collection of plasmids exogenously isolated from marine habitats in a previous study.     

Complete Sequence of Plasmid pMP1 from the Marine Environmental Vibrio vulnificus and Location of Its Replication Origin

A novel cryptic plasmid, pMP1, from an environmental Vibrio vulnificus MP-4 isolated from Mai Po Nature Reserve in Hong Kong, has been characterized. The 7.6-kb plasmid had guanine–cytosine content of 40.03% and encoded four open reading frames (ORFs) with >100 amino acids. The predicted protein of ORF1 contained 478 amino acids showing 29% identity and 50% similarity over 309 amino acids to the integrase of Vibrio cholerae phage VP2. ORF2 encoded a putative protein of 596 amino acids, which were 23% identity and 42% similarity over 455 amino acids to the tail tape measure protein TP901 of Chromohalobacter salexigens phage. ORF3 and ORF4 encoded putative proteins of 103 and 287 amino acids, respectively, but showed no homologies to any known proteins. Further experiments indicated that a 3.2-kb fragment from EcoRI digestion could self-replicate. Analysis indicated that a sequence upstream of ORF4 had the features characteristic of theta-type replicons: AT-rich region, six potential direct repeats (iterons) spaced approximately two DNA helical turn apart (about 23 bp), two copies of 9 bp dnaA boxes, three Dam methylation sites, and five inverted repeats. Complementation experiments confirmed that the protein encoded by ORF4 was required for plasmid replication. We propose that ORF4 encode a new type of Rep protein and pMP1 is a new type of theta plasmid.     

溶藻弧菌质粒pVAE259全序列测定与分子生物学特征分析

【目的】获得溶藻弧菌环状质粒pVAE259全序列,分析其分子生物学特征并探索该质粒可能具备的功能。【方法】使用酶切、克隆测序的方法获得pVAE259的全序列,利用软件分析DNA序列和可能的编码蛋白,推测质粒的生物学信息。【结果】pVAE259为闭合环状质粒,全长6,075 bp,GC含量为42.16%。在NCBI中比对发现pVAE259与Vibriosp.41隐蔽性质粒pPS41具有较高的相似性。我们在序列中找到一个oriT位点,另外全序列的4118-5494 bp推测为质粒复制区域。pVAE259中存在7个氨基酸序列长度大于100的开放式阅读框(ORF):ORF1-ORF7。其中ORF1编码蛋白属于释放酶超级家族(Relaxase Super-family)蛋白,在NCBI数据库中它与大肠杆菌(Escherichia coli)的MobA-like蛋白最相似;ORF2编码蛋白属于复制酶超级家族(Replicase Super-family),它与嗜麦芽寡养单胞菌(Stenotrophomonas maltophilia)的复制蛋白RepA最相似;ORF5与伸长盐单胞菌(Halomonas elongata)质粒pHE1的转移蛋白MobC相似。【结论】根据上述结果及相关文献分析,pVAE259可能是具有转移能力的质粒,该质粒是否影响宿主菌的表型性状还不清楚。     

Characterization of the IncW cryptic plasmid pXV2 from Xanthomonas campestris pv. vesicatoria

The gram-negative plant pathogen Xanthomonas campestris pv. vesicatoria strain Xv2 harbors an indigenous, cryptic plasmid pXV2 of 14.6 kb. This plasmid can only be maintained in Xanthomonas and is incapable of self-transmission. However, incompatibility testing classified it in IncW, a group containing the smallest number of naturally occurring, broad-host-range, conjugative plasmids. A pXV2 derivative containing only a 5.5-kb PstI fragment is stably maintained. Deletion of a 3.0-kb region from the PstI fragment causes a loss of plasmid stability. Nucleotide sequencing of the 2. 1-kb region essential for autonomous replication revealed a repA gene and a downstream noncoding region containing four iterons, two 17- and two 19-nt direct repeats, and an AT-rich region lying between the two sets of iterons. The sequence of the deduced RepA and the iterons shows homology to the RepA (39% identity) and the iterons, respectively, of the IncW plasmid pSa. Maxicell expression of the repA gene produced a protein of 35 kDa, a size similar to that deduced from the nucleotide sequence. Trans-complementation test confirmed that the repA gene and the iterons are indeed the essential elements for pXV2 replication.     

Genes and sites involved in replication and incompatibility of an R100 plasmid derivative based on nucleotide sequence analysis

Summary The nucleotide sequence of the entire region required for autonomous replication and incompatibility of an R100 plasmid derivative, pSM1, has been determined. This region includes the replication region and all plasmid encoded information required for replication. Numerous reading frames for possible proteins can be found in this region. The existence of one of these proteins called RepA1 (285 amino acids; 33,000 daltons) which is encoded within the region known by cloning analysis to be required for replication is supported by several lines of evidence. These include an examination of the characteristic sequences on the proximal and distal ends of the coding region, a comparison of the sequence of the replication regions of pSM1 and the highly related R1 plasmid derivative Rsc13 as well as other biochemical and genetic evidence. The existence of two other proteins, RepA3 (64 amino acids; 7000 daltons) and RepA2 (103 amino acids; 11,400 daltons) is also consistent with most of the criteria mentioned above. However, the region encoding RepA3, which by cloning analysis is within the region responsible for both replication and incompatibility, has never been demonstrated to produce a 7,000 dalton polypeptide. Since a large secondary structure can be constructed in this region, it is possible that the region contains structure or other information that is responsible for incompatibility. RepA2, encoded entirely within the region identified by cloning analysis to be responsible for incompatibility but not for replication can be visualized in vivo and in vitro. However, the nucleotide sequence of the region encoding RepA2 is completely different in mutually incompatible plasmid derivatives of R1 and R100. It is therefore unlikely that RepA2 plays a major role in incompatibility. Thus, we predict that RepA1 is required to initiate DNA synthesis at the replication origin and that the region proximal to RepA1 either encodes a gene product or structure information that is responsible for incompatibility.     

Characterization and Sequence Analysis of the Replicator Region of the Novel Plasmid pALC1 from Paracoccus alcaliphilus

The replicator region of a low-copy-number plasmid, pALC1, of Paracoccus alcaliphilus JCM 7364 was cloned in a form of the minireplicon pALC100 (3.6 kb). The host range of the minireplicon embraces several species of genus Paracoccus, as well as Agrobacterium tumefaciens, Rhizobium leguminosarum, and Rhodobacter sphaeroides (all belonging to alpha-Proteobacteria), but not Escherichia coli. The complete nucleotide sequence of the replicator region (2276 bp) revealed the presence of one complete open reading frame coding for the 28.4-kDa protein (RepA) with similarity to replication proteins of plasmid pSW500 of Erwinia stewartii and pVS1 of Pseudomonas fluorescens. The iteron-like region was identified upstream of the repA gene and consisted of two clusters of repeated sequences (17 bp long) separated by a putative DnaA box. Analysis of the predicted amino acid sequence of two adjacent incomplete ORFs suggests the localization of repA between genes involved in conjugation (traG) and partitioning (parA) within the pALC1 genome.     

Sequence Analysis of the Plasmid pRRI2 from the Rumen Bacterium Prevotella ruminicola 223/M2/7 and the Use of pRRI2 in Prevotella/Bacteroides Shuttle Vectors

pRRI2 is a small cryptic plasmid from the rumen bacterium Prevotella ruminicola 223/M2/7 which has been used for the construction of shuttle vectors (pRH3 and pRRI207) that replicate in many Bacteroides/Prevotella strains as well as in Escherichia coli. Sequence analysis of pRRI2 reveals that it is a 3240-bp plasmid carrying two clear open reading frames. Rep, encoded by ORF1, shows 48 and 47% amino acid sequence identity with RepA proteins from Bacteroides vulgatus and Bacteroides fragilis, respectively. ORF2, named Pre, shares 34% amino acid sequence identity with a putative plasmid recombination protein from the Flavobacterium spp. plasmid pFL1 and 30% amino acid sequence identity with BmpH from B. fragilis Tn5520. Disruption of ORF1 with HindIII prevents replication and maintenance in Bacteroides spp. hosts, but shuttle vectors carrying pRRI2 interrupted within ORF2, by EcoRI*, are able to replicate. pRRI2 shows no significant similarity with the only other P. ruminicola plasmid to have been studied previously, pRAM4.     

Sequence analysis and characterization of plasmids from Streptococcus thermophilus

The nucleotide sequences of eight plasmids isolated from seven Streptococcus thermophilus strains have been determined. Plasmids pSt04, pER1-1, and pJ34 are related and replicate via a rolling circle mechanism. Plasmid pJ34 encodes for a replication initiation protein (RepA) and a small polypeptide with unknown function. Plasmids pSt04 and pER1-1 carry in addition to repA genes coding for small heat shock proteins (sHsp). Expression of these proteins is induced at elevated temperatures or low pH and increases the thermo- and acid resistance. Plasmids pER1-2 and pSt22-2 show identical sequences with five putative open reading frames (ORFs). The gene products of ORF1 and ORF4 reveal some similarities to transposon encoded proteins of Bacillus subtilis and Tn916. ORF1 of plasmid pSt106 encodes a protein similar to resolvases of different Gram-positive bacteria. Integrity of ORF2 and 3, encoding a putative DNA primase and a replication protein, is essential for replication. ORF1 to 3 of plasmid pSt08, which are organized in a tricistronic operon, encode a RepA protein, an adenosine-specific methyltransferase, and a type II restriction endonuclease. Another type II restriction-modification (R/M) system is encoded on plasmid pSt0 which is highly similar to those encoded on lactococcal plasmid pHW393 and B. subtilis plasmid pXH13. Plasmid-free derivatives of strains St0 and St08 show increased phage sensitivity, indicating that in the wild-type strains the R/M systems are functionally expressed. Recombinant plasmids based on the replicons of plasmids pSt04, pJ34, pSt106, pSt08, and pSt0, are able to replicate in Lactococcus lactis and B. subtilis, respectively, whereas constructs carrying pER1-2 only replicate in S. thermophilus.     

Characterization of the replicon of a 51-kb native plasmid from the gram-positive bacterium Leifsonia xyli subsp. cynodontis

The 4992-bp replicon of a large cryptic plasmid in the gram-positive bacterium Leifsonia xyli subsp. cynodontis was identified and sequenced. The replicon encoded two proteins essential for plasmid replication and stability. The putative replication protein (RepA) is homologous to that of the plasmids in mycobacterial pLR7 family, while the putative ParA protein immediately downstream of RepA is significantly homologous to the Walker-type ATPase required for partition of plasmid and chromosome of the gram-positive bacteria. These two proteins and other ORFs are clustered with the putative promoters and other regulatory sequences, illustrating an efficient organization of the replicon for this novel plasmid.     

Nucleotide sequence analysis of small cryptic plasmid pGP2 from <Emphasis Type="Italic">Acetobacter estunensis</Emphasis>

Complete nucleotide sequence of plasmid pGP2 from Acetobacter estunensis GP2 was identified after initial cloning of EcoRI fragment followed by preparation of deletion derivatives. Its size was defined to 2,797 bp and several sites for several restriction enzymes were revealed by DNA sequencing. Sequence analysis predicts three putative open reading frames (ORFs). ORF1 shows significant identity with the bacterial excinuclease α-subunit, ORF2 is a putative replication protein with low similarity with other Acetobacter plasmid’s replication proteins, and ORF3 encodes a class B acid phosphatase/phosphotransferase. The replication module comprises a DnaA box like sequence, direct repeats, a potential prokaryotic promoter and a rep gene. The rep module is similar with several θ-replicating, iteron-containing modules from plasmids, suggesting pGP2 replication may follow the same course. Any phenotypic character determinant gene is absent in pGP2, suggesting this plasmid to be cryptic. However, a pGP2 derivative plasmid, containing the putative pGP2 rep region, can replicate and is stably maintained in Acetobacter and Escherichia coli strains; it can also carry foreign DNA fragments. Thus, pGP2-X could serve as a cloning shuttle vector between these bacteria. Prepared deletion derivatives of plasmid pGP2 suggested that Rep protein is essential for plasmid replication in host bacteria. In its natural host, A. estunensis GP2, pGP2 maintains a four-times lower copy number than in E. coli.     

Functional analysis of ori1 and repA of the R-plasmid pSJ5.6 from Neisseria gonorrhoeae

The functional ori1 of the 5.6kb gonococcal R-plasmid pSJ5.6 contains an A-T rich region followed by four 22bp direct repeats and one 19bp inverted repeat. The replication region of the plasmid also contains a gene encoding for a 39kD RepA protein. We have further assessed the functionality of the replication region in pSJ5.6, an-iteron type plasmid, using in vivo complementation assays in Escherichia coli. A 2.1kb PstI-RsaI fragment containing the ori1 and repA gene of pSJ5.6 was cloned into vector pZErO -2 to obtain pZA-MRR. The pUC origin in pZA-MRR was deleted to render the plasmid dependable on the cis-acting ori1 for replication. The resulting plasmid, pMRR, was capable of replication and maintenance in E. coli. We also cloned the ori1 and repA gene separately to obtain pA-Ori and pZG-Rep, respectively. Using in vivo complementation assays, we demonstrated that the ori1(+) plasmid (pA-Ori) was maintained only when the RepA protein was supplied in trans by the high copy number plasmid pZG-Rep.     

Genetic analysis of a novel plasmid pZMX101 from Halorubrum saccharovorum: determination of the minimal replicon and comparison with the related haloarchaeal plasmid pSCM201

The DNA sequence of a novel haloarchaeal plasmid pZMX101 (3918 bp) from Halorubrum saccharovorum was determined and six ORFs were predicted. The largest ORF encodes a putative replication initiation protein RepA, which shares 40% sequence similarity with the Rep201 of a theta-replication plasmid pSCM201 recently isolated from Haloarcula, suggesting that pZMX101 might replicate via a theta-type mechanism. Using pZMX101 as the only haloarchaeal replicon, a shuttle vector pZMX108 was constructed and successfully transformed into Haloferax volcanii DS70. Based on this in vivo system, the minimal replicon (1978 bp) of pZMX101 was determined. It is composed of the repA gene plus c. 400-bp upstream and 300-bp downstream sequences. Significantly, the putative replication origin of pZMX101 and that of pSCM201 contain different types of sequence motifs, and these two plasmids exhibit distinct host preference for Haloferax and Haloarcula, respectively.     

Genetic Organization of the Basic Replicon of Plasmid pMTH4 of a Facultatively Methylotrophic Bacterium <Emphasis Type="Italic">Paracoccus methylutens</Emphasis> DM12

Two functional regions within the basic replicon of plasmid pMTH4 of Paracoccus methylutens DM12 have been distinguished that are responsible for the replication of the plasmid (REP) and its stabilization (STA). In the REP region, a gene encoding the putative replication initiation protein RepA has been identified, with the highest similarity to the replication protein of plasmid pALC1 (Paracoccus alcaliphilus). The potential origin of replication (oriV), consisting of five long repeated sequences (iterons) as well as putative DnaA and IHF boxes, has been localized in the promoter region of the gene repA. The STA region was found to ensure stability for heterogeneous plasmid pABW3 that is unstable itself in paracocci. The mini-STA region (850 bp) contains two short open reading frames, one of which shows similarity to the RelB protein of Escherichia coli. Our investigations suggest that the stabilizing system of pMTH4 is based on the toxin and antidote principle.     

Nucleotide sequence analysis of cryptic plasmid pAM5 from Acidiphilium multivorum

Plasmid pAM5 of Acidiphilium multivorum JCM-8867 has been completely sequenced by initial cloning of HindIII-PstI fragments followed by primer walking. It has a size of 5161bp and single site for several restriction enzymes as revealed by DNA sequencing. Sequence analysis predicts five putative open reading frames. ORF1 and ORF3 show significant identity with various plasmid encoded mobilization (Mob) and replication initiation (Rep) proteins, respectively. The putative Mob protein has several characteristics of the MOB(Q) family having the motifs with conserved amino acid residues. Upstream of the Mob ORF, there exists a 34bp oriT region having a nic consensus sequence. The constructed plasmid pSK1 bearing pAM5 mob region can be mobilized to Escherichia coli in presence of conjugative plasmid pRK2013. The replication module comprises of several DnaA like boxes, several perfect direct and inverted repeats, a potential prokaryotic promoter and putative rep gene. The rep module is very similar to several theta replicating iteron family plasmids, suggesting pAM5 replication to follow the same course. Any phenotypic character determinant (e.g., metal resistance, antibiotic resistance etc.) gene is absent in pAM5, suggesting this plasmid to be cryptic in nature. However, a pAM5 derivative plasmid named pSK2, containing the putative pAM5 rep region, can replicate and be stably maintained in Acidiphilium, Acidocella, and E. coli strains; it can also carry foreign DNA fragments. Thus, pSK2 could serve as a cloning shuttle vector between these bacteria. It was observed that pAM5 Rep is essential for pSK2 to replicate in acidophiles. In its natural host, A. multivorum JCM-8867, pAM5 maintains a copy number of 50-60, and its derivative pSK2 maintains a comparatively, higher copy number in E. coli than in acidophiles.     

Complete nucleotide sequence and structural organization of pPB1, a small Lactobacillus plantarum cryptic plasmid that originated by modular exchange

A small cryptic plasmid designated pPB1 was isolated from Lactobacillus plantarum BIFI-38 and its complete 2899 bp nucleotide sequence was determined. Sequence analysis revealed four putative open reading frames. Based on sequence analysis two modules could be identified. First, the replication module consisted of a sequence coding for a replication protein (RepB) and its corresponding target site, and two putative repressor proteins (RepA and RepC). Sequence analysis indicated the possible synthesis of an antisense RNA that might regulate RepB production. A putative lagging-strand initiation site was also found, suggesting that pPB1 replicates via a rolling circle mechanism. The second module of pPB1 consisted of a sequence coding for a putative mobilization protein and its corresponding oriT site. Since the nucleotide sequence of the replication module showed 94.5% identity to the similar region on the Leuconostoc lactis plasmid pCI411, and the nucleotide sequence of the mobilization module had 97.5% identity to L. plantarum plasmid pLB4, it is concluded that pPB1 originated by modular exchange between two such plasmids by homologous recombination. Putative recombination sites where crossover might have taken place were also identified.