Development of a lactococcal integration vector by using IS981 and a temperature-sensitive lactococcal replication region.

A vector (pKMP10) capable of Campbell-like integration into the Lactococcus lactis subsp. lactis LM0230 chromosome via homologous recombination with chromosomal IS981 sequences was constructed from the replication region of lactococcal plasmid pSK11L, an internal fragment of IS981, and the erythromycin resistance gene and Escherichia coli replication origin of pVA891. The pSK11L replication region is temperature sensitive for maintenance in L. lactis subsp. lactis LM0230, resulting in loss of unintegrated pKMP10 during growth at greater than 37 degrees C. pKMP10 integrants made up 8 to 75% of LM0230(pKMP10) erythromycin-resistant cells following successive growth at 25 degrees C with selection, 39 degrees C without selection, and 39 degrees C with selection. pKMP10 integrants were also isolated from L. lactis subsp. lactis MG1363(pKMP10) but at a 10-fold-lower frequency (4%). No integrants were isolated form L. lactis subsp. lactis MMS368(pKMP10) (a Rec-deficient strain) or LM0230(pKMP1-E) (the corresponding plasmid lacking the IS981 fragment). Examination of 17 LM0230 integrants by Southern hybridization revealed pKMP10 integration into five different chromosomal sites. Four of the integration sites appeared to be chromosomal IS981 sequences, while one was an uncharacterized chromosomal sequence. The four IS981 integrants seemed to have pKMP10 integrated in a tandem repeat structure of undetermined length. Integrated pKMP10 was more stable (0 to 2% plasmid loss) than unintegrated pKMP10 (100% plasmid loss) when grown for 100 generations at 32 degrees C without selection.     

Replication and temperature-sensitive maintenance functions of lactose plasmid pSK11L from Lactococcus lactis subsp. cremoris.

The replication region of pSK11L, the lactose plasmid of Lactococcus lactis subsp. cremoris (L. cremoris) SK11, was isolated on a 14.8-kbp PvuII fragment by shotgun cloning into an Escherichia coli vector encoding erythromycin resistance and selection for erythromycin-resistant transformants of L. lactis subsp. lactis (L. lactis) LM0230. Deletion analysis and Tn5 mutagenesis of the resulting plasmid (pKMP1) further localized the replication region to a 2.3-kbp ScaI-SpeI fragment. DNA sequence analysis of this 2.3-kbp fragment revealed a 1,155-bp open reading frame encoding the putative replication protein, Rep. The replication origin was located upstream of rep and consisted of an 11-bp imperfect direct repeat and a 22-bp sequence tandemly repeated three and one-half times. The overall organization of the pSK11L replicon was remarkably similar to that of pCI305, suggesting that pSK11L does not replicate by the rolling-circle mechanism. Like pSK11L, pKMP1 was unstable in L. lactis LM0230. Deletion analysis allowed identification of several regions which appeared to contribute to the maintenance of pKMP1 in L. lactis LM0230. pKMP1 was significantly more stable in L. cremoris EB5 than in L. lactis LM0230 at all of the temperatures compared. This stability was lost by deletion of a 3.1-kbp PvuII-XbaI fragment which had no effect on stability in L. lactis LM0230. Other regions affecting stability in L. cremoris EB5 but not in L. lactis LM0230 were also identified. Stability assays conducted at various temperatures showed that pKMP1 maintenance was temperature sensitive in both L. lactis LM0230 and L. cremoris EB5, although the plasmid was more unstable in L. lactis LM0230. The region responsible for the temperature sensitivity phenotype in L. lactis LM0230 was tentatively localized to a 1.2-kbp ClaI-HindIII fragment which was distinct from the replication region of pSK11L. Our results suggest that the closely related L. lactis and L. cremoris subspecies behave differently regarding maintenance of plasmids.     

Molecular characterization of the integration of the lactose plasmid from Lactococcus lactis subsp. cremoris SK11 into the chromosome of L. lactis subsp. lactis.

When Lactococcus lactis subsp. lactis LM0230 is transformed by the lactose plasmid (pSK11L) from Lactococcus lactis subsp. cremoris SK11, variants with pSK11L in the integrated state can be derived (J. M. Feirtag, J. P. Petzel, E. Pasalodos, K. A. Baldwin, and L. L. McKay, Appl. Environ. Microbiol. 57:539-548, 1991). In the present study, a 1.65-kb XbaI-XhoI fragment of pSK11L was subcloned for use as a probe in Southern hybridization analyses of the mechanism of integration, which was shown to proceed via a Campbell-like, single-crossover event. Furthermore, the presence of the XbaI-XhoI fragment in a nonreplicating vector facilitated the stable, Rec-dependent integration of the vector into the chromosome of L. lactis subsp. lactis LM0230 and other lactococci. DNA sequence analysis of the fragment revealed an open reading frame of 885 bp with lactococcal expression sequences. The putative gene did not have significant homology with other genes in computer data bases. The XbaI-XhoI fragment is a naturally occurring piece of lactococcal DNA that can be used as a recombinogenic cassette in the construction of integration vectors for the industrially important lactococci.     

Molecular characterization of the integration of the lactose plasmid from Lactococcus lactis subsp. cremoris SK11 into the chromosome of L. lactis subsp. lactis.

When Lactococcus lactis subsp. lactis LM0230 is transformed by the lactose plasmid (pSK11L) from Lactococcus lactis subsp. cremoris SK11, variants with pSK11L in the integrated state can be derived (J. M. Feirtag, J. P. Petzel, E. Pasalodos, K. A. Baldwin, and L. L. McKay, Appl. Environ. Microbiol. 57:539-548, 1991). In the present study, a 1.65-kb XbaI-XhoI fragment of pSK11L was subcloned for use as a probe in Southern hybridization analyses of the mechanism of integration, which was shown to proceed via a Campbell-like, single-crossover event. Furthermore, the presence of the XbaI-XhoI fragment in a nonreplicating vector facilitated the stable, Rec-dependent integration of the vector into the chromosome of L. lactis subsp. lactis LM0230 and other lactococci. DNA sequence analysis of the fragment revealed an open reading frame of 885 bp with lactococcal expression sequences. The putative gene did not have significant homology with other genes in computer data bases. The XbaI-XhoI fragment is a naturally occurring piece of lactococcal DNA that can be used as a recombinogenic cassette in the construction of integration vectors for the industrially important lactococci.     

Insertion elements on lactococcal proteinase plasmids

DNA segments of 809 and 808 nucleotides, with 18-base-pair terminal inverted repeats, are present on the proteinase plasmids pWV05 from Lactococcus lactis subsp. cremoris Wg2 and pSK111 from L. lactis subsp. cremoris SK11, respectively. These DNA segments are highly similar: 77% identical nucleotides and both contain an open reading frame that can encode a protein of 226 amino acids. Furthermore, both DNA segments are located downstream of the proteinase maturation gene prtM, but they differ individually in their orientation with respect to the prtM gene. On the basis of the striking similarity between ISS1, an 808-base-pair insertion sequence (IS) from L. lactis subsp. lactis ML3 lactose plasmid pSK08, and the DNA segments of pWV05 and pSK111, we propose that these DNA segments comprise IS elements. The IS elements from strains Wg2 and SK11 were named ISS1W and ISS1N, respectively. On pWV05, ISS1W is flanked on one side by only part of a second IS element, indicating that pWV05 evolved as a deletion derivative of a precursor plasmid that carried at least two IS elements.     

Thermosensitive plasmid replication, temperature-sensitive host growth, and chromosomal plasmid integration conferred by Lactococcus lactis subsp. cremoris lactose plasmids in Lactococcus lactis subsp. lactis.

Evidence is presented that lactose-fermenting ability (Lac+) in Lactococcus lactis subsp. cremoris AM1, SK11, and ML1 is associated with plasmid DNA, even though these strains are difficult to cure of Lac plasmids. When the Lac plasmids from these strains were introduced into L. lactis subsp. lactis LM0230, they appeared to replicate in a thermosensitive manner; inheritance of the plasmid was less efficient at 32 to 40 degrees C than at 22 degrees C. The stability of the L. lactis subsp. cremoris Lac plasmids in lactococci appeared to be a combination of both host and plasmid functions. Stabilized variants were isolated by growing the cultures at 32 to 40 degrees C; these variants contained the Lac plasmids integrated into the L. lactis subsp. lactis LM0230 chromosome. In addition, the presence of the L. lactis subsp. cremoris Lac plasmids in L. lactis subsp. lactis resulted in a temperature-sensitive growth response; growth of L. lactis subsp. lactis transformants was significantly inhibited at 38 to 40 degrees C, thereby resembling some L. lactis subsp. cremoris strains with respect to temperature sensitivity of growth.     

Thermosensitive plasmid replication, temperature-sensitive host growth, and chromosomal plasmid integration conferred by Lactococcus lactis subsp. cremoris lactose plasmids in Lactococcus lactis subsp. lactis

Evidence is presented that lactose-fermenting ability (Lac+) in Lactococcus lactis subsp. cremoris AM1, SK11, and ML1 is associated with plasmid DNA, even though these strains are difficult to cure of Lac plasmids. When the Lac plasmids from these strains were introduced into L. lactis subsp. lactis LM0230, they appeared to replicate in a thermosensitive manner; inheritance of the plasmid was less efficient at 32 to 40 degrees C than at 22 degrees C. The stability of the L. lactis subsp. cremoris Lac plasmids in lactococci appeared to be a combination of both host and plasmid functions. Stabilized variants were isolated by growing the cultures at 32 to 40 degrees C; these variants contained the Lac plasmids integrated into the L. lactis subsp. lactis LM0230 chromosome. In addition, the presence of the L. lactis subsp. cremoris Lac plasmids in L. lactis subsp. lactis resulted in a temperature-sensitive growth response; growth of L. lactis subsp. lactis transformants was significantly inhibited at 38 to 40 degrees C, thereby resembling some L. lactis subsp. cremoris strains with respect to temperature sensitivity of growth.     

Insertion elements on lactococcal proteinase plasmids.

DNA segments of 809 and 808 nucleotides, with 18-base-pair terminal inverted repeats, are present on the proteinase plasmids pWV05 from Lactococcus lactis subsp. cremoris Wg2 and pSK111 from L. lactis subsp. cremoris SK11, respectively. These DNA segments are highly similar: 77% identical nucleotides and both contain an open reading frame that can encode a protein of 226 amino acids. Furthermore, both DNA segments are located downstream of the proteinase maturation gene prtM, but they differ individually in their orientation with respect to the prtM gene. On the basis of the striking similarity between ISS1, an 808-base-pair insertion sequence (IS) from L. lactis subsp. lactis ML3 lactose plasmid pSK08, and the DNA segments of pWV05 and pSK111, we propose that these DNA segments comprise IS elements. The IS elements from strains Wg2 and SK11 were named ISS1W and ISS1N, respectively. On pWV05, ISS1W is flanked on one side by only part of a second IS element, indicating that pWV05 evolved as a deletion derivative of a precursor plasmid that carried at least two IS elements.     

Identification, DNA sequence, and distribution of IS981, a new, high-copy-number insertion sequence in lactococci.

An insertion in the lactococcal plasmid pGBK17, which inactivated the gene(s) encoding resistance to the prolate-headed phage c2, was cloned, sequenced, and identified as a new lactococcal insertion sequence (IS). IS981 was 1,222 bp in size and contained two open reading frames, one large enough to encode a transposase. IS981 ended in imperfect inverted repeats of 26 of 40 bp and generated a 5-bp direct repeat of target DNA at the site of insertion. IS981 was present on the chromosome of Lactococcus lactis subsp. lactis LM0230 from where it transposed to pGBK17 during transformation. Twenty-three strains of lactococci examined for the presence of IS981 by Southern hybridization showed 4 to 26 copies per genome, with L. lactis subsp. cremoris strains containing the highest number of copies. Comparison of the DNA sequence and the amino acid sequence of the long open reading frame to other known sequences showed that IS981 is related to a family of IS elements that includes IS2, IS3, IS51, IS150, IS600, IS629, IS861, IS904, and ISL1.     

Identification, DNA sequence, and distribution of IS981, a new, high-copy-number insertion sequence in lactococci.

An insertion in the lactococcal plasmid pGBK17, which inactivated the gene(s) encoding resistance to the prolate-headed phage c2, was cloned, sequenced, and identified as a new lactococcal insertion sequence (IS). IS981 was 1,222 bp in size and contained two open reading frames, one large enough to encode a transposase. IS981 ended in imperfect inverted repeats of 26 of 40 bp and generated a 5-bp direct repeat of target DNA at the site of insertion. IS981 was present on the chromosome of Lactococcus lactis subsp. lactis LM0230 from where it transposed to pGBK17 during transformation. Twenty-three strains of lactococci examined for the presence of IS981 by Southern hybridization showed 4 to 26 copies per genome, with L. lactis subsp. cremoris strains containing the highest number of copies. Comparison of the DNA sequence and the amino acid sequence of the long open reading frame to other known sequences showed that IS981 is related to a family of IS elements that includes IS2, IS3, IS51, IS150, IS600, IS629, IS861, IS904, and ISL1.     

Cloning and sequence analysis of a plasmid replicon from Lactococcus lactis subsp. cremoris FG2

A replication region from one of the Lactococcus lactis subsp. cremoris FG2 plasmids was isolated by cloning of a 4.8-kb XbaI fragment into a replication probe vector and transformation into L. lactis LM0230. A 1.8-kb region within this fragment was sequenced and confirmed by PCR subcloning to encode a functional replicon in LM0230. The replicon consists of an open reading frame encoding a putative replication protein (Rep) of 386 amino acids and a non-coding region (ori) which features several structural motifs typical of other known replication origins, including a 22-bp iteron sequence tandemly repeated three and a half times, a 10-bp direct repeat and two sets of inverted repeats. The ori region could drive replication of its plasmid when supplied with the replication region in-trans. The lack of detectable single-stranded DNA during replication and the existence of extensive homology with other known lactococcal theta replicons strongly suggest that this region encodes a theta-replicating mechanism.     

Construction of first-generation lactococcal integrative cloning vectors

Using a randomly-cloned, HindIII-digested, chromosomal fragment from Lactococcus lactis subsp. lactis LM0230, first-generation lactococcal integrative cloning vectors were developed. Through dideoxy DNA sequence analysis, the cloned chromosomal DNA fragment was determined to be 1026 base pairs. Southern hybridization studies demonstrated applicability of the integrative vector to other strains of L. lactis and L. lactis subsp. cremoris. Identification of a single NruI site near the middle of the chromosomal fragment allowed insertion of the erythromycin (Em)-resistance (ery ^r) gene obtained from L. lactis IL1837. Integration of the ery ^r gene into the L. lactis LM0230 chromosome was achieved by a Campbell-like recombination. The nisin (Nis)-resistance (nis ^r) gene from L. lactis IL1904 was inserted into the NruI site in a separate clone and integration into the L. lactis LM0230 chromosome was achieved via a replacement recombination event following electroporation of the linearized nis ^r fragment flanked by the cloned chromosomal DNA. Transformants grown in the absence of either Em or Nis for >200 generations and subsequently transferred to various concentrations of the selectable agent confirmed the stability of the integrated genes. Further studies involving the Nis-resistant (Nis ^r ) transformant suggested that the integrated nis ^r gene may be amplifying within the host chromosome. Correspondence to: S. K. Harlander     

High-efficiency gene inactivation and replacement system for gram-positive bacteria.

A system for high-efficiency single- and double-crossover homologous integration in gram-positive bacteria has been developed, with Lactococcus lactis as a model system. The system is based on a thermosensitive broad-host-range rolling-circle plasmid, pG+host5, which contains a pBR322 replicon for propagation in Escherichia coli at 37 degrees C. A nested set of L. lactis chromosomal fragments cloned onto pG+host5 were used to show that the single-crossover integration frequency was logarithmically proportional to the length of homology for DNA fragments between 0.35 and 2.5 kb. Using random chromosomal 1-kb fragments, we showed that homologous integration can occur along the entire chromosome. We made use of the reported stimulatory effect of rolling-circle replication on intramolecular recombination to develop a protocol for gene replacement. Cultures were first maintained at 37 degrees C to select for a bacterial population enriched for plasmid integrants; activation of the integrated rolling-circle plasmid by a temperature shift to 28 degrees C resulted in efficient plasmid excision by homologous recombination and replacement of a chromosomal gene by the plasmid-carried modified copy. More than 50% of cells underwent replacement recombination when selection was applied for the replacing gene. Between 1 and 40% of cells underwent replacement recombination when no selection was applied. Chromosomal insertions and deletions were obtained in this way. These results show that gene replacement can be obtained at an extremely high efficiency by making use of the thermosensitive rolling-circle nature of the delivery vector. This procedure is applicable to numerous gram-positive bacteria.     

The plasmid-encoded lactococcal envelope-associated proteinase is encoded by a chromosomal gene in Lactococcus lactis subsp. cremoris BC101.

The plasmid-free strain Lactococcus lactis subsp. cremoris BC101 produced an extracellular proteinase physicochemically similar to the proteinase encoded by the plasmid-linked prtP gene of other lactococcal strains. The absence of detectable plasmids in strain BC101 indicated that the prtP proteinase gene may be chromosomally located. The chromosomal linkage of the prtP proteinase gene in BC101 was confirmed by pulsed-field electrophoresis of chromosomal DNA and hybridization, using as a probe the plasmid-linked prtP gene from L. lactis subsp. cremoris Wg2. The prtM gene necessary for the maturation of the proteinase was also chromosomally located adjacent to prtP in BC101. By using as a hybridization probe the ISS1-like element ISS1W, which is found adjacent to the proteinase genes in both pWV05 and pSK111, specific homology to the chromosomal fragment containing the proteinase gene was found. DNA sequencing of a polymerase chain reaction product of chromosomal DNA upstream from prtM revealed a 123-nucleotide sequence which was 100% identical to the equivalent sequence in the ISS1W-containing plasmid. The terminal inverted repeat (18 nucleotides) of the ISS1W element was found in this sequenced DNA. These findings suggest that the chromosomal proteinase gene is organized in a fashion similar to that of the plasmid-linked proteinase gene.     

Isolation of a replication region of a large lactococcal plasmid and use in cloning of a nisin resistance determinant

The replication region of a 28-kilobase-pair (kbp) cryptic plasmid from Lactococcus lactis subsp. lactis biovar diacetylactis SSD207 was cloned in L. lactis subsp. lactis MG1614 by using the chloramphenicol resistance gene from the streptococcal plasmid pGB301 as a selectable marker. The resulting 8.1-kbp plasmid, designated pVS34, was characterized further with respect to host range, potential cloning sites, and location of replication gene(s). In addition to lactococci, pVS34 transformed Lactobacillus plantarum and, at a very low frequency, Staphylococcus aureus but not Escherichia coli or Bacillus subtilis. The 4.1-kbp ClaI fragment representing lactococcal DNA in pVS34 contained unique restriction sites for HindIII, EcoRI, XhoII, and HpaII, of which the last three could be used for molecular cloning. A region necessary for replication was located within a 2.5-kbp fragment flanked by the EcoRI and ClaI restriction sites. A 3.8-kbp EcoRI fragment derived from a nisin resistance plasmid, pSF01, was cloned into the EcoRI site of pVS34 to obtain a nisin-chloramphenicol double-resistance plasmid, pVS39. From this plasmid, the streptococcal chloramphenicol resistance region was subsequently eliminated. The resulting plasmid, pVS40, contains only lactococcal DNA. Potential uses for this type of a nisin resistance plasmid are discussed.     

Molecular characterization of a second abortive phage resistance gene present in Lactococcus lactis subsp. lactis ME2.

The fifth phage resistance factor from the prototype phage-insensitive strain Lactococcus lactis subsp. lactis ME2 has been characterized and sequenced. The genetic determinant for Prf (phage resistance five) was subcloned from the conjugative plasmid pTN20, which also encodes a restriction and modification system. Typical of other abortive resistance mechanisms, Prf reduces the efficiency of plaquing to 10(-2) to 10(-3) and decreases the plaque size and burst size of the small isometric-headed phage p2 in L. lactis subsp. lactis LM0230. However, normal-size plaques occurred at a frequency of 10(-4) and contained mutant phages that were resistant to Prf, even after repeated propagation through a sensitive host. Prf does not prevent phage adsorption or promote restriction and modification activities, but 90% of Prf+ cells infected with phage p2 die. Thus, phage infections in Prf+ cells are aborted. Prf is effective in both L. lactis subsp. lactis and L. lactis subsp. cremoris strains against several small isometric-headed phages but not against prolate-headed phages. The Prf determinant was localized by Tn5 mutagenesis and subcloning. DNA sequencing identified a 1,056-nucleotide structural gene designated abiC. Prf+ expression was obtained when abiC was subcloned into the lactococcal expression vector pMG36e. abiC is distinct from two other lactococcal abortive phage resistance genes, abiA (Hsp+, from L. lactis subsp. lactis ME2) and abi416 (Abi+, from L. lactis subsp. lactis IL416). Unlike abiA, the action of abiC does not appear to affect DNA replication. Thus, abiC represents a second abortive system found in ME2 that acts at a different point of the phage lytic cycle.     

Characterization of two nisin-producing Lactococcus lactis subsp. lactis strains isolated from a commercial sauerkraut fermentation.

Two Lactococcus lactis subsp. lactis strains, NCK400 and LJH80, isolated from a commercial sauerkraut fermentation were shown to produce nisin. LJH80 was morphologically unstable and gave rise to two stable, nisin-producing (Nip+) derivatives, NCK318-2 and NCK318-3. NCK400 and derivatives of LJH80 exhibited identical morphological and metabolic characteristics, but could be distinguished on the basis of plasmid profiles and genomic hybridization patterns to a DNA probe specific for the iso-ISS1 element, IS946. NCK318-2 and NCK318-3 harbored two and three plasmids, respectively, which hybridized with IS946. Plasmid DNA was not detected in NCK400, and DNA from this strain failed to hybridize with IS946. Despite the absence of detectable plasmid DNA in NCK400, nisin-negative derivatives (NCK402 and NCK403) were isolated after repeated transfer in broth at 37 degrees C. Nisin-negative derivatives concurrently lost the ability to ferment sucrose and became sensitive to nisin. A 4-kbp HindIII fragment containing the structural gene for nisin (spaN), cloned from L. lactis subsp. lactis ATCC 11454, was used to probe genomic DNA of NCK318-2, NCK318-3, NCK400, and NCK402 digested with EcoRI or HindIII. The spaN probe hybridized to an 8.8-kbp EcoRI fragment and a 10-kbp HindIII fragment in the Nip+ sauerkraut isolates, but did not hybridize to the Nip- derivative, NCK402. A different hybridization pattern was observed when the same probe was used against Nip+ L. lactis subsp. lactis ATCC 11454 and ATCC 7962. These phenotypic and genetic data confirmed that unique Nip+ L. lactis subsp. lactis strains were isolated from fermenting sauerkraut.     

New tools for the physical and genetic mapping of Lactococcus strains.

Tools for the genetic and physical analysis of the Lactococcus lactis subsp. lactis genome were developed. Plasmid pRC1 does not replicate in Gram+ bacteria; it contains unique ApaI, NotI and SmaI restriction sites and an erythromycin-resistance (ErR) encoding gene, ermAM, functional in L. lactis subsp. lactis. When a chromosomal L. lactis subsp. lactis DNA fragment was cloned into this vector, the resulting plasmid became integrated, after transformation, into the bacterial chromosome by homologous recombination in a Campbell-like manner. The integration lead to the generation of new rare restriction sites near to the host fragment. This procedure allows precise mapping of cloned genes onto the chromosomal restriction map. The mapping of the his operon of L. lactis subsp. lactis provides an illustration. The cloning into pRC1 of an IS element able to transpose into the chromosome of the target cell, gave rise to an integration plasmid able to insert randomly rare restriction sites onto the bacterial chromosome. The L. lactis IS element, ISS1RS, was cloned into pRC1, yielding pRL1. Pulsed-field gel electrophoresis analysis of ErR clones obtained after transformation with pRL1, showed that this plasmid was stably integrated at a number of different sites in the L. lactis subsp. lactis chromosome, via transposition. Plasmids pRC1 and pRL1 can greatly facilitate the construction of the physical and genetic map of the chromosome of lactococcal strains.     

Improved electroporation efficiency of intact Lactococcus lactis subsp. lactis cells grown in defined media

The impact of growth conditions on electroporation of Lactococcus lactis subsp. lactis LM0230 (previously designated Streptococcus lactis LM0230) was evaluated. Cells grown in M17 broth supplemented with 0.5% glucose (M17-Glu) and two chemically defined synthetic media, FMC and RPMI 1640, all supplemented with 0.24% DL-threonine or 0.5% glycine, were harvested, washed with double-distilled water, diluted, and porated in the presence of 1 microgram of pGB301 DNA with a Transfector 100 (BTX, Inc., San Diego, Calif.) or a Gene Pulser (Bio-Rad Laboratories, Richmond, Calif.). Transformants were recovered at consistently higher efficiencies for cells grown in FMC or RPMI 1640 (10(3) to 10(4) transformants per micrograms of DNA) than for cells grown in M17-Glu (10(1) to 10(2) transformants per micrograms of DNA). Other parameters influencing electroporation of L. lactis cells grown in chemically defined media were growth phase and final concentration of cells, concentration of plasmid DNA, voltage achieved during poration, and expression conditions. A high degree of variability in transformation efficiencies was evident for replicate samples of cells pulsed with either electroporation machine. A trend toward decreased variability was observed for duplicate samples of cells prepared on the same day. In addition, storage studies done with a large batch of cells prepared on the same day indicated that freezing dry cell pellets at -60 degrees C had no deleterious effect on transformation efficiencies over a 30-day period when a new 0.2-cm cuvette was used for porating each sample.