Circular DNA molecules imaged in air by scanning force microscopy.

Routine and reproducible imaging of DNA molecules in air with the scanning force microscope (SFM) has been accomplished. Circular molecules of plasmid DNA were deposited onto red mica and imaged under various relative humidities. In related experiments, the first images of the Escherichia coli RNA polymerase-DNA complex have also been obtained. This has been possible by (1) the use of specially modified SFM tips with a consistent radius of curvature of 10 nm or less, to minimize the amount of image distortion introduced by the finite dimensions of commercially available tips, (2) the optimization of a method to deposit and bind DNA molecules to the mica surface in a stable fashion, and (3) careful control of the sample humidity, to prevent solvation of the molecules and detachment from the surface by the scanning tip or stylus. Contact forces in the range of a few nanonewtons are routinely possible in air and in the presence of residual humidity. The spatial resolution of the images appears determined by the radius of curvature of the modified styli, which can be estimated directly from the apparent widths of the DNA molecules in the images.     

Structure of adsorbed fibrinogen obtained by scanning force microscopy

It is shown that scanning force microscopy (SFM), operated in the attractive mode, can be used to obtain high resolution pictures of adsorbed fibrinogen molecules on solid surfaces, without the need for staining or special microscope grids. SFM also reveals the three-dimensional structure of the adsorbed molecules. Two forms of adsorbed fibrinogen are demonstrated on hydrophobic silicone dioxide surfaces; a trinodular about 60 nm long and a globular with about a 40 nm diameter. Polymeric networks formed after storage of the surface with adsorbed fibrinogen in PBS for 11 days are also shown. The SFM-results for the trinodular structure suggest the existence of loops or peptide chains extending outside the basic structure of the fibrinogen molecule.     

Correlation functions quantify super-resolution images and estimate apparent clustering due to over-counting

We present an analytical method using correlation functions to quantify clustering in super-resolution fluorescence localization images and electron microscopy images of static surfaces in two dimensions. We use this method to quantify how over-counting of labeled molecules contributes to apparent self-clustering and to calculate the effective lateral resolution of an image. This treatment applies to distributions of proteins and lipids in cell membranes, where there is significant interest in using electron microscopy and super-resolution fluorescence localization techniques to probe membrane heterogeneity. When images are quantified using pair auto-correlation functions, the magnitude of apparent clustering arising from over-counting varies inversely with the surface density of labeled molecules and does not depend on the number of times an average molecule is counted. In contrast, we demonstrate that over-counting does not give rise to apparent co-clustering in double label experiments when pair cross-correlation functions are measured. We apply our analytical method to quantify the distribution of the IgE receptor (FcεRI) on the plasma membranes of chemically fixed RBL-2H3 mast cells from images acquired using stochastic optical reconstruction microscopy (STORM/dSTORM) and scanning electron microscopy (SEM). We find that apparent clustering of FcεRI-bound IgE is dominated by over-counting labels on individual complexes when IgE is directly conjugated to organic fluorophores. We verify this observation by measuring pair cross-correlation functions between two distinguishably labeled pools of IgE-FcεRI on the cell surface using both imaging methods. After correcting for over-counting, we observe weak but significant self-clustering of IgE-FcεRI in fluorescence localization measurements, and no residual self-clustering as detected with SEM. We also apply this method to quantify IgE-FcεRI redistribution after deliberate clustering by crosslinking with two distinct trivalent ligands of defined architectures, and we evaluate contributions from both over-counting of labels and redistribution of proteins.     

Time-Lapse Imaging of Conformational Changes in Supercoiled DNA by Scanning Force Microscopy

Most of the scanning force microscopy (SFM) images of supercoiled DNA on untreated mica thus far reported have not shown tight plectonemic structure seen by electron microscopy, but instead less coiled molecules and sometimes a partly "condensed" state with intimate chain-chain interactions. By observing time-lapse images of conformational changes of DNA induced by decreasing ionic strength of imaging buffer in solution SFM, we could show that the process of water rinsing, an indispensable step for preparation of dried samples, may be responsible for some of the conformational anomalies in the images previously reported. We have studied several protocols to observe supercoiled DNA molecules by SFM and discuss the merits and the demerits. Images obtained following uranyl acetate treatment may be ideal for the detection of DNA damage, as the supercoiled and nicked forms are easily distinguishable.     

Metallosomes.

Structures and ordered arrays containing organometallic particles have potential application in nanofabrication, smaller computer components, optical devices, sensors, and membrane probes and as detection agents. Here, we describe construction of gold clusters covalently attached to lipids and their use in forming typical lipid structures: micelles, liposomes ("metallosomes"), and sheets on an air-water interface. Two sizes of gold clusters were used, undecagold, with an 11-gold atom core 0.8 nm in diameter, and the larger Nanogold, with a 1.4-nm gold core. The morphology of the structures formed was determined by electron microscopy at a resolution at which single gold-lipid molecules were visualized. Further modification by additional catalytic metal deposition enhanced detectability. The approach is flexible and permits a wide variety of metal particle structures to be created using known lipid structures as templates. Additionally, these gold-lipids may serve as useful membrane labels.     

Ni-NTA-gold clusters target His-tagged proteins.

Addition of six histidines to recombinant proteins has proved useful in their purification by nickel-affinity columns. This technology was adapted by synthesizing the chelator for nickel (nitrilotriacetic acid, NTA) onto the surface of gold clusters. These Ni-NTA-gold clusters were shown to specifically target the 6His region of tagged proteins. Results were verified by column chromatography, dot and overlay blots, UV-Vis spectroscopy, and scanning transmission electron microscopy. A 6His-tagged adenovirus "knob" protein was also shown to maintain receptor binding activity after gold labeling. Two types of gold clusters were used: 1.4-nm Nanogold and a new 1.8-nm "PeptideGold" coated with an NTA-dipeptide-thiol. These novel labels should be useful in site-specific high-resolution EM labeling, as well as in metallographic development, detection in the light microscope, or direct visualization.     

Vertical dimension of hydrated biological samples in tapping mode scanning force microscopy.

The vertical dimensions of the well-characterized test samples tobacco mosaic virus, T4 bacteriophage polyhead, purple membrane, and hexagonally packed intermediate (HPI) layer were investigated by tapping mode scanning force microscopy (SFM) in solution. Purple membrane and HPI layer were imaged in both contact mode and tapping mode SFM for direct comparison. All vertical dimensions match the known heights. The practical implications of the absence of frictional forces in tapping mode are discussed.     

Enhanced resolution of specific chromosome and nuclear regions by reflectance laser scanning confocal microscopy

 DNA sequences digested by HaeIII and reconstructed by in situ nick translation employing digoxigenin-labelled nucleotides are usually revealed either by horseradish peroxidase or FITC fluorescence. To obtain a significant improvement in terms of resolution, sensitivity and specificity, colloidal gold has been used instead of FITC (as the reporter molecule) to reveal the labelled DNA. Colloidal gold and propidium iodide were visualised by employing the reflectance mode and the 488-nm laser line of a confocal laser scanning microscope. In chromosomes, the fluorescent reaction pattern showed diffuse areas of labelling in which it was impossible to identify any specific kind of banding along the arms. In some chromosomes and, in particular, 1 and 9, a C-negative banding due to the negativity of the centromeric areas was seen. A more accurate localisation on chromosomes, including telomeric regions, often organised in spot pairs that resembled an R-like banding, was detected using 1-nm colloidal gold. A fine labelling was also demonstrated in nuclei, especially at their peripheral heterochromatin. The non-fading properties of colloidal gold combined with visualisation by reflectance confocal laser scanning microscopy demonstrated the possibility of obtaining a higher spatial resolution than when using conventional fluorophores or higher laser wavelength. This improved way to study the localization of HaeIII digestion sites in single chromosomes and in interphase nuclei made the reaction a valuable tool for the detection of antigens or of specific DNA sequences in biological preparations. Accepted: 5 September 1996     

Mapping of intracellular halogenous molecules by low and high resolution SIMS microscopy.

The subcellular distribution of halogenous molecules has been studied by SIMS microscopy in cultured cells of a human breast carcinoma (MCF-7 cell line). Two instruments of microanalysis were used. A low lateral resolution ion microscope (SMI 300 CAMECA) and a prototype scanning ion microscope equipped with a cesium gun that gives high lateral resolution images. This apparatus has been developed by G Slodzian, in Onera Laboratories (Office National d'Etudes et de Recherches Aérospatiales). Molecules studied by low lateral resolution ion microscope were halogenous steroids: fluorometholone, triamcinolone, bromocriptine and bromoandrosterone. Analytical images show that the first two compounds are mainly localized in the nuclear structure of MCF-7 cells whereas the last two molecules are localized in cytoplasm of these cells. Images were obtained with a resolution of 1 micron. With the scanning ion microscope, it is now possible to obtain images at the ultrastructural level. Four analytical images can be simultaneously obtained by a single scan of the imaged area, corresponding to a depth of erosion of the section of ten nm. The intranuclear distributions of three pyrimidine analogs, 5-bromo-2'-deoxyuridine, 5-iodo-2'-deoxyuridine and 5-fluorouracil have been studied in phase S and M of MCF-7 cells and these images have been compared to the distribution of sulfur, nitrogen and phosphorus. All these images have been obtained with a lateral resolution better than 100 nm.     

Striving for atomic resolution in biomolecular topography: The scanning force microscope (SFM)

The invention in 1986 of scanning force microscopy (SFM) provided a new and powerful tool for the investigation of biological structures. SFM yields a three-dimensional view at nanometer resolution of the surface topography associated with biological objects. The potential for imaging either macromolecules or biomolecules and cells under native (physiological) conditions is currently being exploited to obtain functional information at the molecular level. In addition, the forces involved in individual bimolecular interactions are being assessed under static and dynamic conditions. In this report we focus on the imaging capability of the SFM. The rather broad spectrum of applications represented is intended to orient the prospective user of biological SFM.     

Structure and activation dynamics of RBL-2H3 cells observed with scanning force microscopy.

Surface and subsurface dynamics of Rat Basophilic Leukemia cells, a model system of stimulated secretion, were imaged using Scanning Force Microscopy (SFM) at a rate of 50-60 s/image. Cytoskeletal elements and organelles were tracked within quiescent cells and those activated after IgE receptor crosslinking. In addition, surface waves were observed moving within the plasma membrane. The structures seen in quiescent and activated cells can be correlated with those seen in electron micrographs and topographic SFM images of fixed detergent-extracted cells. Furthermore, images of the detergent-extracted nuclei reveal the presence of numerous nuclear pore complexes. High-magnification images of the nuclear pore complexes show evidence of subunit structure and exhibit dimensions consistent with those reported previously using electron microscopy. The behavior and overall change in morphology of cells observed during activation was consistent with that observed under similar conditions with Differential Interference Contrast microscopy. This study demonstrates that SFM, unlike other techniques, can be used to provide high-resolution information in both fixed and living cells.     

Computational reconstruction of multidomain proteins using atomic force microscopy data

Classical structural biology techniques face a great challenge to determine the structure at the atomic level of large and flexible macromolecules. We present a novel methodology that combines high-resolution AFM topographic images with atomic coordinates of proteins to assemble very large macromolecules or particles. Our method uses a two-step protocol: atomic coordinates of individual domains are docked beneath the molecular surface of the large macromolecule, and then each domain is assembled using a combinatorial search. The protocol was validated on three test cases: a simulated system of antibody structures; and two experimentally based test cases: Tobacco mosaic virus, a rod-shaped virus; and Aquaporin Z, a bacterial membrane protein. We have shown that AFM-intermediate resolution topography and partial surface data are useful constraints for building macromolecular assemblies. The protocol is applicable to multicomponent structures connected in the polypeptide chain or as disjoint molecules. The approach effectively increases the resolution of AFM beyond topographical information down to atomic-detail structures.     

Sequence-dependent DNA curvature and flexibility from scanning force microscopy images

This paper reports a study of the sequence-dependent DNA curvature and flexibility based on scanning force microscopy (SFM) images. We used a palindromic dimer of a 1878-bp pBR322 fragment and collected a large pool of SFM images. The curvature of each imaged chain was measured in modulus and direction. It was found that the ensemble curvature modulus does not allow the separation of static and dynamic contributions to the curvature, whereas the curvature, when its direction in the two dimensions is taken into account, permits the direct separation of the intrinsic curvature contributions static and dynamic contributions. The palindromic symmetry also acted as an internal gauge of the validity of the SFM images statistical analysis. DNA static curvature resulted in good agreement with the predicted sequence-dependent intrinsic curvature. Furthermore, DNA sequence-dependent flexibility was found to correlate with the occurrence of A.T-rich dinucleotide steps along the chain and, in general, with the normalized basepair stacking energy distribution.     

Superhelix dimensions of a 1868 base pair plasmid determined by scanning force microscopy in air and in aqueous solution.

We have used scanning force microscopy (SFM) to study the conformation of a 1868 base pair plasmid (p1868) in its open circular form and at a superhelical density of sigma= -0.034. The samples were deposited on a mica surface in the presence of MgCl2. DNA images were obtained both in air and in aqueous solutions, and the dimensions of the DNA superhelix were analysed. Evaluation of the whole plasmid yielded average superhelix dimensions of 27 +/- 9 nm (outer superhelix diameter D), 107 +/- 51 nm (superhelix pitch P), and 54 +/-8 degrees (superhelix pitch angle alpha). We also analysed compact superhelical regions within the plasmid separately, and determined values of D = 9.2 +/- 3.3 nm, P = 42 +/- 13 nm and alpha= 63 +/- 20 degrees for samples scanned in air or rehydrated in water. These results indicate relatively large conformation changes between superhelical and more open regions of the plasmid. In addition to the analysis of the DNA superhelix dimensions, we have followed the deposition process of open circular p1868 to mica in real time. These experiments show that it is possible to image DNA samples by SFM without prior drying, and that the surface bound DNA molecules retain some ability to change their position on the surface.     

Fragment-based phase extension for three-dimensional structure determination of membrane proteins by electron crystallography

In electron crystallography, membrane protein structure is determined from two-dimensional crystals where the protein is embedded in a membrane. Once large and well-ordered 2D crystals are grown, one of the bottlenecks in electron crystallography is the collection of image data to directly provide experimental phases to high resolution. Here, we describe an approach to bypass this bottleneck, eliminating the need for high-resolution imaging. We use the strengths of electron crystallography in rapidly obtaining accurate experimental phase information from low-resolution images and accurate high-resolution amplitude information from electron diffraction. The low-resolution experimental phases were used for the placement of α helix fragments and extended to high resolution using phases from the fragments. Phases were further improved by density modifications followed by fragment expansion and structure refinement against the high-resolution diffraction data. Using this approach, structures of three membrane proteins were determined rapidly and accurately to atomic resolution without high-resolution image data.     

Combined scanning probe and total internal reflection fluorescence microscopy

Combining scanning probe and optical microscopy represents a powerful approach for investigating structure-function relationships and dynamics of biomolecules and biomolecular assemblies, often in situ and in real-time. This platform technology allows us to obtain three-dimensional images of individual molecules with nanometer resolution, while simultaneously characterizing their structure and interactions though complementary techniques such as optical microscopy and spectroscopy. We describe herein the practical strategies for the coupling of scanning probe and total internal reflection fluorescence microscopy along with challenges and the potential applications of such platforms, with a particular focus on their application to the study of biomolecular interactions at membrane surfaces.     

Spatial-temporal studies of membrane dynamics: scanning fluorescence correlation spectroscopy (SFCS)

Giant unilamellar vesicles (GUVs) have been widely used as a model membrane system to study membrane organization, dynamics, and protein-membrane interactions. Most recent studies have relied on imaging methods, which require good contrast for image resolution. Multiple sequential image processing only detects slow components of membrane dynamics. We have developed a new fluorescence correlation spectroscopy (FCS) technique, termed scanning FCS (i.e., SFCS), which performs multiple FCS measurements simultaneously by rapidly directing the excitation laser beam in a uniform (circular) scan across the bilayer of the GUVs in a repetitive fashion. The scan rate is fast compared to the diffusion of the membrane proteins and even small molecules in the GUVs. Scanning FCS outputs a "carpet" of timed fluorescence intensity fluctuations at specific points along the scan. In this study, GUVs were assembled from rat kidney brush border membranes, which included the integral membrane proteins. Scanning FCS measurements on GUVs allowed for a straightforward detection of spatial-temporal interactions between the protein and the membrane based on the diffusion rate of the protein. To test for protein incorporation into the bilayers of the GUVs, antibodies against one specific membrane protein (NaPi II cotransporter) were labeled with ALEXA-488. Fluorescence images of the GUVs in the presence of the labeled antibody showed marginal fluorescence enhancement on the GUV membrane bilayers (poor image contrast and resolution). With the application of scanning FCS, the binding of the antibody to the GUVs was detected directly from the analysis of diffusion rates of the fluorescent antibody. The diffusion coefficient of the antibody bound to NaPi II in the GUVs was approximately 200-fold smaller than that in solution. Scanning FCS provided a simple, quantitative, yet highly sensitive method to study protein-membrane interactions.     

Integrated nanopore sensing platform with sub-microsecond temporal resolution

Nanopore sensors have attracted considerable interest for high-throughput sensing of individual nucleic acids and proteins without the need for chemical labels or complex optics. A prevailing problem in nanopore applications is that the transport kinetics of single biomolecules are often faster than the measurement time resolution. Methods to slow down biomolecular transport can be troublesome and are at odds with the natural goal of high-throughput sensing. Here we introduce a low-noise measurement platform that integrates a complementary metal-oxide semiconductor (CMOS) preamplifier with solid-state nanopores in thin silicon nitride membranes. With this platform we achieved a signal-to-noise ratio exceeding five at a bandwidth of 1 MHz, which to our knowledge is the highest bandwidth nanopore recording to date. We demonstrate transient signals as brief as 1 μs from short DNA molecules as well as current signatures during molecular passage events that shed light on submolecular DNA configurations in small nanopores.     

Rows of ATP synthase dimers in native mitochondrial inner membranes

The ATP synthase is a nanometric rotary machine that uses a transmembrane electrochemical gradient to form ATP. The structures of most components of the ATP synthase are known, and their organization has been elucidated. However, the supramolecular assembly of ATP synthases in biological membranes remains unknown. Here we show with submolecular resolution the organization of ATP synthases in the yeast mitochondrial inner membranes. The atomic force microscopy images we have obtained show how these molecules form dimers with characteristic 15 nm distance between the axes of their rotors through stereospecific interactions of the membrane embedded portions of their stators. A different interaction surface is responsible for the formation of rows of dimers. Such an organization elucidates the role of the ATP synthase in mitochondrial morphology. Some dimers have a different morphology with 10 nm stalk-to-stalk distance, in line with ATP synthases that are accessible to IF1 inhibition. Rotation torque compensation within ATP synthase dimers stabilizes the ATP synthase structure, in particular the stator-rotor interaction.