Effect of temperature on the mechanism of actin polymerization

The rate of the Mg2+-induced polymerization of rabbit skeletal muscle G-actin has been measured as as function of temperature at pH 8 by using various concentrations of Mg2+, Ca2+, and G-actin. A polymerization mechanism similar to that proposed at this pH [Frieden, C. (1983) Proc. Natl. Acad. Sci. U.S.A. 80, 6513-6517] was found to fit the data from 10 to 35 degrees C. From the kinetic data, no evidence for actin filament fragmentation was found at any temperature. Dimer formation is the most temperature-sensitive step, with the ratio of forward and reverse rate constants changing 4 orders of magnitude from 10 to 35 degrees C. Over this temperature change, all other ratios of forward and reverse rate constants change 7-fold or less, and the critical concentration remains nearly constant. The reversible Mg2+-induced isomerization of G-actin monomer occurs to a greater extent with increasing temperature, measured either by using N-(iodoacetyl)-N'-(5-sulfo-1-naphthyl)ethylenediamine-labeled actin or by simulation of the full-time course of the polymerization reaction. This is partially due to Mg2+ binding becoming tighter, and Ca2+ binding becoming weaker, with increasing temperature. Elongation rates from the filament-pointed end, determined by using actin nucleated by plasma gelsolin, show a temperature dependence slightly larger than that expected for a diffusion-limited reaction.     

The effects of Mg2+ at the high-affinity and low-affinity sites on the polymerization of actin and associated ATP hydrolysis

Actin contains a single high-affinity cation-binding site, for which Ca2+ and Mg2+ can compete, and multiple low-affinity cation-binding sites, which can bind Ca2+, Mg2+, or K+. Binding of cations to the low-affinity sites causes polymerization of monomeric actin with either Ca2+ or Mg2+ at the high-affinity site. A rapid conformational change occurs upon binding of cations to the low-affinity sites (G----G) which is apparently associated with the initiation of polymerization. A much slower conformational change (G----G', or G----G' if the low-affinity sites are also occupied) follows the replacement of Ca2+ by Mg2+ at the high-affinity site. This slow conformational change is reflected in a 13% increase in the fluorescence of G-actin labeled with the fluorophore 7-chloro-4-nitrobenzene-2-oxadiazole (NBD-labeled actin). The rate of the ATP hydrolysis that accompanies elongation is slower with Ca-G-actin than with Mg-G'-actin (i.e. with Ca2+ rather than Mg2+ at the high-affinity site) although their rates of elongation are similar. The slow ATP hydrolysis on Ca-F-actin causes a lag in the increase in fluorescence associated with the elongation of actin labeled with the fluorophore N-pyrene iodoacetamide (pyrenyl-labeled actin), even though there is no lag in the elongation rate, because pyrenyl-labeled ATP-F-actin subunits have a lower fluorescence intensity than pyrenyl-labeled ADP-F-actin subunits. The effects of the cation bound to the high-affinity binding site must, therefore, be considered in quantitatively analyzing the kinetics of polymerization of NBD-labeled actin and pyrenyl-labeled actin. Although their elongation rates are not very different, the rate of nucleation is much slower for Ca-G-actin than for Mg-G'-actin, probably because of the slower rate of ATP hydrolysis when Ca2+ is bound to the high-affinity site.     

The kinetics of cytochalasin D binding to monomeric actin

It has been shown previously, using G-actin labeled with N-iodoacetyl-N'-(5-sulfo-1-naphthyl)ethylene-diamine, that Mg2+ induces a conformational change in monomeric G-actin as a consequence of binding to a tight divalent cation binding site (Frieden, C. (1982) J. Biol. Chem. 257, 2882-2886). Using the same fluorescent probe, we show that, subsequent to the Mg2+-induced conformational change, cytochalasin D induces a fluorescence decrease. The data are consistent with a mechanism which proposes that, after Mg2+ binding, cytochalasin D binds and induces a second conformational change which results in overall tight binding of the cytochalasin. The initial binding of cytochalasin D to monomeric actin labeled with the fluorescent probe was found to be 200 microM, and the forward and reverse rate constants for the subsequent conformational change were 350 s-1 and 8 s-1, respectively, with an overall dissociation constant to the Mg2+-induced form of 4.6 microM. The conformational change does not occur in monomeric actin in the presence of Ca2+ rather than Mg2+, but Ca2+ competes with Mg2+ for the tight binding site on the G-actin molecule. Direct binding studies show that actin which has not been labeled with the fluorophore binds cytochalasin D more tightly. The conformational change induced by Mg2+ and cytochalasin D precedes the formation of an actin dimer.     

Divalent cation binding to the high- and low-affinity sites on G-actin

Metal binding to skeletal muscle G-actin has been assessed by equilibrium dialysis using 45Ca2+ and by kinetic measurements of the increase in the fluorescence of N-acetyl-N'-(5-sulfo-1-naphthyl)-ethylenediamine-labeled actin. Two classes of cation binding sites were found on G-actin which could be separated on the basis of their Ca2+ affinity: a single high-affinity site with a Kd considerably less than 1 microM and three identical moderate-affinity binding sites with a Kd of 18 microM. The data for the Mg2+-induced fluorescence enhancement of actin labeled with N-acetyl-N'-(5-sulfo-1-naphthyl)ethylenediamine support a previously suggested mechanism [Frieden, C. (1982) J. Biol. Chem. 257, 2882-2886] in which Ca2+ is replaced by Mg2+ at the moderate affinity site(s), followed by a slow actin isomerization. This isomerization occurs independently of Ca2+ release from the high-affinity site. The fluorescence data do not support a mechanism in which this isomerization is directly related to Ca2+ release from the high-affinity site. Fluorescence changes of labeled actin associated with adding metal chelators are complex and do not reflect the same change induced by Mg2+ addition. Fluorescence changes in the labeled actin have also been observed for the addition of Cd2+ or Mn2+ instead of Mg2+. It is proposed actin may undergo a host of subtle conformational changes dependent on the divalent cation bound. We have also developed a method by which progress curves of a given reaction can be analyzed by nonlinear regression fitting of kinetic simulations to experimental reaction time courses.(ABSTRACT TRUNCATED AT 250 WORDS)     

pH-induced changes in G-actin conformation and metal affinity

Metal-induced conformational changes in actin at 20 degrees C have been investigated as a function of pH using actin labeled at Cys-374 with N-(iodoacetyl)-N'-(5-sulfo-1-naphthyl)ethylenediamine. At pH 8, the addition of a high Ca2+ concentration (2 mM) to G-actin gives an instantaneous fluorescence increase while the addition of a high Mg2+ concentration gives both an instantaneous and a slow fluorescence increase. The instantaneous increase is interpreted as divalent cation binding to low-affinity, relatively nonspecific sites, while the slow response is attributed to Mg2+ binding to specific sites of moderate affinity [Zimmerle, C.T., Patane, K., & Frieden, C. (1987) Biochemistry 26, 6545-6552]. The magnitudes of both the instantaneous and slow fluorescence increases associated with Mg2+ addition to G-actin are shown here to decrease as the pH is lowered while the fluorescence of labeled G-actin in the presence of low or moderate Ca2+ concentrations (less than 200 microM) increases. The pH-dependent data suggest that protonation of a single class of residues with an approximate pK of 6.8 alters the immediate environment of the label differently depending upon the cation bound at the moderate-affinity site. The pH-dependent changes in the magnitude of the slow fluorescence response upon Mg2+ addition to Ca2+-actin are not associated with changes in the Mg2+ affinity at the moderate-affinity site but result from protonation altering the fluorescence response to Mg2+ binding. Protonation of this same class of residues is proposed to induce an actin conformation similar to that induced by cation binding at the low-affinity sites.(ABSTRACT TRUNCATED AT 250 WORDS)     

Proton nuclear magnetic resonance and electron paramagnetic resonance studies on skeletal muscle actin indicate that the metal and nucleotide binding sites are separate

The distance separating the high-affinity binding sites of actin for a divalent metal ion and nucleotide was evaluated by using high-resolution proton NMR and EPR spectroscopy. Replacement of the Ca2+ or Mg2+ bound to the high-affinity divalent cation site of G-actin by trivalent lanthanide ions such as La3+, EU3+, or Gd3+ results in an increase in the mobility of the bound ATP as observed in the NMR spectra of G-actin monomers. Little difference was observed between the spectra obtained in the presence of the diamagnetic La3+ control and the paramagnetic ions Eu3+ and Gd3+ which respectively shift and broaden the proton resonances of amino acids in the vicinity of the binding site. Analysis of the NMR spectra indicates that the metal and nucleotide binding sites are separated by a distance of at least 16 A. In the past, the metal and ATP have been widely assumed to bind as a complex. Further verification that the two sites on actin are physically separated was obtained by using an ATP analogue with a nitroxide spin-label bound at the 6' position of the purine ring. An estimate of the distance was made between the site containing the ATP analogue and the paramagnetic ion, Mn2+, bound to the cation binding site. These EPR experiments were not affected by the state of polymerization of the actin. The data obtained by using this technique support the conclusion stated above, namely, that the cation and nucleotide sites on either G- or F-actin are well separated.     

Formation of actin dimers as studied by small angle neutron scattering

Small angle neutron scattering has been used to study the dimensions of G-actin and the formation of low molecular weight actin oligomers under conditions where rapid polymerization does not take place. In the presence of 200 microM Ca2+, actin in solution consists of a single component with a radius of gyration (Rg) of 19.9 +/- 0.4 A, consistent with the known molecular dimensions of the G-actin molecule. In the presence of 50 microM Mg2+, however, formation of an actin species with a larger Rg occurs over a 4-h period. Multicomponent fits were tried and the data were best fit assuming two components, the monomer and a species with an Rg of 29 +/- 1 A. This latter value is consistent with the dimensions expected for certain actin dimers. The apparent dissociation constant for dimer formation is approximately 150 microM with forward and reverse rate constants of 6.0 X 10(-7) microM-1 s-1 and 8.8 X 10(-5) s-1, respectively. Kinetic fluorescence experiments show that the dimer formed in the presence of low levels of Mg2+ is a nonproductive complex which does not participate in the polymerization process. However, the addition of cytochalasin D to actin in the presence of 50 microM Mg2+ rapidly induces the formation of dimers, presumably related to cytochalasin's ability to nucleate actin polymerization.     

Mechanism for nucleotide exchange in monomeric actin

Rabbit skeletal muscle G-actin has been treated to obtain ADP, 1,N6-ethenoadenosine diphosphate (epsilon-ADP), or 1,N6-ethenoadenosine triphosphate (epsilon-ATP) at the nucleotide binding site and either Mg2+ or Ca2+ at high- and moderate-affinity metal binding sites. Apparent rates or rate constants for the displacement of the actin-bound nucleotides by epsilon-ATP or ATP have been obtained by stopped-flow measurements at pH 8 and 20 degrees C of the fluorescence difference between bound and free epsilon-ATP or epsilon-ADP. In the presence of Ca2+, displacement of ADP by epsilon-ATP or epsilon-ADP by ATP is a biphasic process, but in the presence of low (less than 10 microM) Mg2+ concentrations, it is a slow first-order process. At high levels of Mg2+ (greater than 50 microM), low ADP concentrations displace epsilon-ATP from G-actin as a consequence of Mg2+ binding to moderate-affinity sites on the actin. Displacement of epsilon-ATP by ATP in the presence of either Ca2+ or Mg2+ is slow at low ATP concentrations, but the rate is increased by high ATP concentrations. Using ethylene glycol bis(beta-aminoethyl ether)-N,N,N',N'-tetraacetic acid, we find that nucleotide exchange is affected differently by the removal of Ca2+ from the high-affinity site compared to Ca2+ removal from moderate-affinity sites. A mechanism for the displacement reaction is proposed in which there are two forms of an actin-ADP complex and metal binding influences the ratio of these forms as well as the binding of ATP.(ABSTRACT TRUNCATED AT 250 WORDS)     

Role of ATP-bound divalent metal ion in the conformation and function of actin. Comparison of Mg-ATP, Ca-ATP, and metal ion-free ATP-actin

The fluorescence of N-acetyl-N'-(sulfo-1-naphthyl)ethylenediamine (AEDANS) covalently bound to Cys-374 of actin is used as a probe for different conformational states of G-actin according to whether Ca-ATP, Mg-ATP, or unchelated ATP is bound to the nucleotide site. Upon addition of large amounts (greater than 10(2)-fold molar excess) of EDTA to G-actin, metal ion-free ATP-G-actin is obtained with EDTA bound. Metal ion free ATP-G-actin is characterized by a higher AEDANS fluorescence than Mg-ATP-G-actin, which itself has a higher fluorescence than Ca-ATP-G-actin. Evidence for EDTA binding to G-actin is shown using difference spectrophotometry. Upon binding of EDTA, the rate of dissociation of the divalent metal ion from G-actin is increased (2-fold for Ca2+, 10-fold for Mg2+) in a range of pH from 7.0 to 8.0. A model is proposed that quantitatively accounts for the kinetic data. The affinity of ATP is weakened 10(6)-fold upon removal of the metal ion. Metal ion-free ATP-G-actin is in a partially open conformation, as indicated by the greater accessibility of -SH residues, yet it retains functional properties of polymerization and ATP hydrolysis that appear almost identical to those of Ca-ATP-actin, therefore different from those of Mg-ATP-actin. These results are discussed in terms of the role of the ATP-bound metal ion in actin structure and function.     

The first step in the polymerisation of actin

In the presence of certain cations (e.g. K+ or Mg2+) actin polymerizes. Below a certain concentration (the critical concentration) the monomer G-actin does not polymerize on the addition of K+ or Mg2+. However, the proteolysis experiments of Rich and Estes [J. Mol. Biol. 104, 777--792 (1976)] strongly suggest that cations induce a change in conformation of G-actin leading to a novel form of actin, G*-actin. This conformational change may be the first step in the polymerization of actin. We have studied G*-actin induced by K+, by difference spectroscopy. We show that G*-actin is a monomer and we confirm that the bound ATP is not cleaved. We also studied the G-actin in equilibrium with G*-actin equilibrium at 4 degrees C as a function of K+ or Mg2+ concentration. With KCl, the transformation can be accounted for as a screening effect. The effect of Mg2+ is more specific and the change in conformation of the G-actin could result from the binding of two or three Mg2+ ions/molecule. We suggest that the G-actin in equilibrium with G*-actin transformation results from the neutralization of a polyanionic region on the actin surface and that this region could be the highly negatively charged N terminus.     

The accessibility of etheno-nucleotides to collisional quenchers and the nucleotide cleft in G- and F-actin.

Recent publication of the atomic structure of G-actin (Kabsch, W., Mannherz, H. G., Suck, D., Pai, E. F., & Holmes, K. C., 1990, Nature 347, 37-44) raises questions about how the conformation of actin changes upon its polymerization. In this work, the effects of various quenchers of etheno-nucleotides bound to G- and F-actin were examined in order to assess polymerization-related changes in the nucleotide phosphate site. The Mg(2+)-induced polymerization of actin quenched the fluorescence of the etheno-nucleotides by approximately 20% simultaneously with the increase in light scattering by actin. A conformational change at the nucleotide binding site was also indicated by greater accessibility of F-actin than G-actin to positively, negatively, and neutrally charged collisional quenchers. The difference in accessibility between G- and F-actin was greatest for I-, indicating that the environment of the etheno group is more positively charged in the polymerized form of actin. Based on calculations of the change in electric potential of the environment of the etheno group, specific polymerization-related movements of charged residues in the atomic structure of G-actin are suggested. The binding of S-1 to epsilon-ATP-G-actin increased the accessibility of the etheno group to I- even over that in Mg(2+)-polymerized actin. The quenching of the etheno group by nitromethane was, however, unaffected by the binding of S-1 to actin. Thus, the binding of S-1 induces conformational changes in the cleft region of actin that are different from those caused by Mg2+ polymerization of actin.(ABSTRACT TRUNCATED AT 250 WORDS)     

Differences in G-actin containing bound ATP or ADP: the Mg2+-induced conformational change requires ATP

The role of adenosine 5'-triphosphate (ATP) in the Mg2+-induced conformational change of rabbit skeletal muscle G-actin has been investigated by comparing actin containing bound ADP with actin containing bound ATP. As previously described [Frieden, C. (1982) J. Biol. Chem. 257, 2882-2886], N-acetyl-N'-(5-sulfo-1-naphthyl)ethylenediamine-labeled G-actin containing ATP undergoes a time-dependent Mg2+-induced fluorescence change that reflects a conformational change in the actin. Addition of Mg2+ to labeled G-actin containing ADP gives no fluorescence change, suggesting that the conformational change does not occur. The fluorescence change can be restored on the addition of ATP. Examination of the time courses of these experiments suggests that ATP must replace ADP prior to the Mg2+-induced change. The Mg2+-induced polymerization of actin containing ADP is extraordinarily slow compared to that of actin containing ATP. The lack of the Mg2+-induced conformational change, which is an essential step in the Mg2+-induced polymerization, is probably the cause for the very slow polymerization of actin containing ADP. On the other hand, at 20 degrees C, at pH 8, and in 2 mM Mg2+, the elongation rate from the slow growing end of an actin filament, measured by using the protein brevin to block growth at the fast growing end, is only 4 times slower for actin containing ADP than for actin containing ATP.     

Role of calcium as an inhibitor of rat liver carbamylphosphate synthetase I

The mechanism of Ca2+ inhibition of carbamylphosphate synthetase I has been investigated using purified enzyme obtained from livers of rats fed a high protein diet. Binding of Mn2+ to the enzyme was measured by EPR techniques at pH 7.8, and Scatchard plots of the data indicated one Mn2+-binding site with a K'd of 13 microM. From competition studies between Mn2+ and Ca2+ or Mg2+ binding, values of 180 microM were obtained for K'd (Mg) and 193 microM for K'd (Ca). A nonlinear least squares curve fitting program was used to calculate the K'm for MgATP2- at the metal-nucleotide binding sites using a simplified rate equation of the enzyme reaction mechanism. Values of 140 and 2420 microM were obtained for K'm (MgATP) at the first and second sites, respectively, at pH 7.8, with a free Mg2+ of 1 mM and other substrates and activators present at saturating concentrations. Variations of the bicarbonate, N-acetylglutamate, and ammonia concentrations in the absence and presence of different amounts of total calcium, from which free Ca2+, free Mg2+, MgATP2-, and CaATP2- concentrations were calculated, permitted values for K'i (CaATP) to be obtained by graphic procedures. Mean values of 375 and 120 microM were obtained for K'i (CaATP) at the first and second sites, respectively. Using the above kinetic constants, a computer model of the enzyme reaction was constructed and tested using two further sets of kinetic data obtained by varying the concentrations of Mg2+, Ca2+, MgATP2-, and CaATP2-. Poor fits were obtained unless the formation of a mixed complex involving CaATP2- competition with MgATP2- at the second metal-nucleotide-binding site was incorporated into the rate equation. Nonlinear least squares curve fitting of both sets of experimental data gave a well determined value of 124 microM for this final CaATP2- inhibitory constant. Sensitivity tests for variation of the primary kinetic constants with the computer model showed that the inhibitory effect of free Ca2+ was weak and that the observed calcium inhibition of carbamylphosphate synthetase can be accounted for primarily by competitive interaction of CaATP2- at the second MgATP2- binding site. With 1 mM free Mg2+ and 5 mM MgATP2-, half-maximal inhibition of enzyme activity was obtained with 0.2 mM CaATP2-.     

Phosphorylation by actin kinase of the pointed end domain on the actin molecule.

Fragmin from plasmodium of Physarum polycephalum binds G-actin and severs F-actin in the presence of Ca2+ over 10(-6) M. The fragmin-actin complex consisting of fragmin and G-actin nucleates actin polymerization and caps the barbed (fast growing) end of F-actin, regardless of the concentrations of Ca2+, and the actin filaments are shortened. Actin kinase purified from plasmodium abolishes the nucleation and capping activities of the complex by phosphorylating actin of the fragmin-actin complex (Furuhashi, K., and Hatano, S. (1990) J. Cell. Biol. 111, 1081-1087). This inactivation of the complex leads to production of long actin filaments. We obtained evidence that Physarum actin is phosphorylated by actin kinase at Thr-201, and probably at Thr-202 and/or Thr-203, with 1 mol of phosphate distributed among them. This finding raises the possibility that the site of phosphorylation, Thr-201 to Thr-203, is positioned on the pointed (slow growing) end domain of the actin molecule, because growth of actin filaments from the fragmin-actin complex occurs only from the pointed end. These observations are consistent with a model of the three-dimensional structure of G-actin. Inactivation of the fragmen-actin complex may follow phosphorylation of the pointed end domain of actin.     

Interactions of plasma gelsolin with actin. Isolation and characterization of binary and ternary plasma-gelsolin-actin complexes

We have studied the interactions between plasma gelsolin and actin: firstly the complex formation between both proteins, secondly the effects of gelsolin and its complexes on G-actin polymerization and F-actin fragmentation. Complex formation has been studied by high-performance gel permeation chromatography; plasma gelsolin alone elutes at an Mr of about 77000 and a Stokes radius of 3.7 nm; complex formation occurs in the presence of Ca2+: by chromatography in the presence of EGTA, a binary complex is obtained with an Mr of 134000 and a Stokes radius of 4.7 nm; and by chromatography in the presence of Ca2+, a ternary complex is obtained with an Mr of 173000 and a Stokes radius of 5.2 nm. The binary complex is EGTA-stable. In relation to this stability of the binary complex, the depolymerizing function of gelsolin is not reversed upon chelation of Ca2+. The effects of plasma gelsolin and its complexes on both G-actin polymerization and F-actin fragmentation, and their Ca2+ dependence have been examined by viscometry and electron microscopy. The main conclusions of these studies are the following: the fast processes are the formation of ternary complex, which acts as a heteronucleus for G-actin polymerization, and the severing function of gelsolin, these fast processes are Ca2+-dependent; the slow processes are related to the capping ability of gelsolin or its complexes and are Ca2+-independent.     

Characterization of carbethoxylated actin

The carbethoxylation of histidine residues in G-actin impairs actin polymerization. The histidine residue essential for polymerization was identified as histidine-40 [Hegyi, G., Premecz, G., Sain, B., & Mühlrad, A. (1974) Eur. J. Biochem. 44, 7-12]. Non-polymerizable actin was separated from the polymerizable fraction after partial carbethoxylation. The non-polymerizable actin recovered the ability to polymerize following addition of phalloidin. Taking into account the evidence that phalloidin does not bind to G-actin in the absence of salt, the results indicate that the actin monomer undergoes a conformational change and subsequently binds phalloidin before polymerization. The resulting polymers activated S1 ATPase activity as effectively as control F-actin. In the presence of tropomyosin and troponin, a strong inhibition of actin-activated ATPase activity was observed in the absence of Ca2+, although no inhibition was observed in the presence of Ca2+. These results indicate that His-40 is not directly involved in a myosin binding site nor in a tropomyosin-troponin binding site.     

Activation of heavy meromyosin adenosine triphosphatase by various states of actin.

F-actin monomer (F-monomer) is formed upon the addition of neutral salt to G-actin. Since F-monomer has a digestibility similar to that of F-actin and much lower than that of G-actin, it has been proposed that F-monomer has a conformation different from that of G-actin and similar to the conformation of the subunits in F-actin. To examine whether F-monomer will enhance the magnesium-activated myosin adenosine triphosphatase (Mg2+-ATPase) as much as F-actin, the ability of partially polymerized actin populations at equilibrium to activate the Mg2+-ATPase of heavy meromyosin was investigated. Correlations were made between ATPase activities and the polymerization state of actin as determined by measurements of viscosity and digestibility. No significant activation of the heavy meromyosin ATPase was observed under conditions where G-actin or mixtures of G-actin and F-monomer were present. As polymer formation occurred at higher actin concentrations, or with increased KCl concentrations, substantial activation characteristic of F-actin was observed. The data suggest that F-monomer may undergo a further conformational change as it forms nuclei or joins onto polymers. Alternatively, the site of actin which activates the myosin ATPase may involve the crevice between two adjacent actin subunits.     

Mg2+-paracrystal formation of tropomyosin as a condensation phenomenon. Effects of pH, salt, temperature, and troponin binding.

Tropomyosin (Tm) paracrystal formation induced by Mg2+ was studied by monitoring increases in light scattering. Paracrystals formed above a critical Tm concentration with lag phases in the time courses at pH 7.5 and 6.0, indicating that condensation polymerization processes are involved. The kinetic data at pH 7.5 reasonably fit a model in which nucleation and elongation are taken into account. The rate and extent of light scattering increased at low [Mg2+] and decreased at high [Mg2+] with a maximum at [Mg2+] = 15 mM, indicating different effects of Mg2+ in the two [Mg2+] ranges. The paracrystals were destabilized by increasing the salt concentration and decreasing the temperature. Mg2+ produces paracrystals at pH 6.0 and pH 7.5 by different kinetic mechanisms. Different Tm intermolecular interactions at the two pH values were indicated by studies of the excimer fluorescence of pyrene-labeled Tm and by effects of salt and temperature on the kinetics. At pH 6.0 Tm more readily formed paracrystals with decreased electrostatic effects. Effects of troponin on Mg2+-paracrystal formation of Tm at the two pH values correlated with the known differences in paracrystal structure when troponin is bound to Tm.     

Conformational changes in subdomain 2 of G-actin: fluorescence probing by dansyl ethylenediamine attached to Gln-41.

Gln-41 on G-actin was specifically labeled with a fluorescent probe, dansyl ethylenediamine (DED), via transglutaminase reaction to explore the conformational changes in subdomain 2 of actin. Replacement of Ca2+ with Mg2+ and ATP with ADP on G-actin produced large changes in the emission properties of DED. These substitutions resulted in blue shifts in the wavelength of maximum emission and increases in DED fluorescence. Excitation of labeled actin at 295 nm revealed energy transfer from tryptophans to DED. Structure considerations and Cu2+ quenching experiments suggested that Trp-79 and/or Trp-86 serves as energy donors to DED. Energy transfer from these residues to DED on Gln-41 increased with the replacement of Ca2+ with Mg2+ and ATP with ADP. Polymerization of Mg-G-actin with MgCl2 resulted in much smaller changes in DED fluorescence than divalent cation substitution. This suggests that the conformation of loop 38-52 on actin is primed for the polymerization reaction by the substitution of Ca2+ with Mg2+ on G-actin.     

Ce~（3＋）与G－肌动蛋白结合引起的构象变化及对聚合的影响

用Ａｅｄａｎｓ标记肌动蛋白单体Ｇ－Ａｃｔｉｎ上Ｃｙｓ３７４残基作为探针,研究了稀土离子Ｃｅ~（３＋）与Ｇ－Ａｃｔｉｎ的结合及引起的微构象变化。Ｃｅ~（３＋）在低浓度（Ｃｅ~（３＋）／Ａｃｔｉｎ摩尔比＜１）和Ｃａ~（２＋）竞争Ｇ－Ａｃｔｉｎ上二价离子的高亲合位点。Ｃｅ~（３＋）取代Ｃａ~（２＋）引起Ａｅｄａｎｓ荧光强度增强与Ｍｇ~（２＋）取代Ｃａ~（２＋）的结果相同。Ｃｅ~（３＋）／Ａｃｔｉｎ＞ｌ则导致Ａｅｄａｎｓ荧光强度下降。说明Ｃｅ~（３＋）在高低两种浓度条件下结合的位点及对Ｃｖｓ３７４的微构象的影响不同。时间分辩测得的Ａｅｄａｎｓ荧光寿命也支持这一结论。ＣＤ谱结果表明Ｃｅ~（３＋）／Ａｃｔｉｎ＜０．４,Ａｃｔｉｎ的二级结构增加,大于０．４又导致其失去。Ｃｅ~（３＋）－Ａｃｔｉｎ在有／无游离ＡＴＰ时用聚合液诱导的聚合结果表明,无游离ＡＴＰ时,极低浓度Ｃｅ~（３＋）促进聚合,高浓度虽有促进但有所减弱;有游离ＡＴＰ时,Ｃｅ~（３＋）／Ａｃｔｉｎ在实验范围内促进聚合。