Highly sensitive HPLC analysis and biophysical characterization of N-glycans of IgG-Fc domain in comparison between CHO and 293 cells using FcγRIIIa ligand

Quality control of monoclonal antibodies is challenging due in part to the diversity of post-translational modifications present. The regulation of the N-glycans of IgG-Fc domain is one of the key factors to maintain the safety and efficacy of antibody drugs. The FcγRIIIa affinity column is an attractive tool for the precise analysis of the N-glycans in IgG-Fc domain. We used the mutant FcγRIIIa, which is produced in Escherichia coli and is therefore not glycosylated, as an affinity reagent to analyze the N-glycans of monoclonal antibodies expressed in Expi293 and ExpiCHO cells. The monoclonal antibodies expressed in these cells showed very different chromatograms, because of differences in terminal galactose residues on the IgG-Fc domains. We also carried out kinetic and thermodynamic analyses to understand the interaction between monoclonal antibodies and the mutant FcγRIIIa. Expi293 cell-derived monoclonal antibodies had higher affinity for the mutant FcγRIIIa than those derived from ExpiCHO cells, due to slower off rates and lower binding entropy loss. Collectively, our results suggest that the FcγRIIIa column can be used to analyze the glycosylation of antibodies rapidly and specifically.     

抗体库的发展及未来

抗体库的出现为制备人源性单抗开辟了一条行之有效的途径．虽然该技术问世只有短短几年的时间,但其筛选系统已有了很大的改进;现已能够快速地从抗体库中筛选出各种具有不同用途的抗体．从而克服了传统杂交瘤技术的某些局限性．文章就抗体库的发展及其应用前景进行了概述.     

抗人IgG Fc片段及Fab段单抗的鉴定及应用

本实验采用木瓜酶水解,SPA柱亲合层析等手段得到人IgGFc段及Fab段,以Sigma抗人IgGfFc段和抗人IgG Fab段单抗为标准品,鉴定了细胞库中抗人IgG系列的部分细胞株,得到特异性分泌抗人IgG Fc段和抗人IgG Fab段单抗的细胞各一株。 在上述实验基础上,用抗人IgG Fc及抗人IgG Fab单抗分别制备了Sepharose4B亲合层析柱,提纯了酶解人IgG Fc、Fab片段,经ELISA法鉴定,相互之间无交叉反应。同时用此方法制备了人抗HBe Fab片段,并将该片段进行了过氧化物酶标记,用来配制HBe ELISA诊断盒,证明其生物活性未受影响,而且消除了类风湿因子引起的HBe Ag假阳性现象。因抗HBe单抗来源困难,如采用HBe多抗制备ELISA试剂,本法将是提高质量的一个好方法。     

Induction of immunological tolerance using monoclonal antibodies: applications to organ transplantation and autoimmune disease

Immunologic tolerance is a state of immune paralysis specific to a given antigen (the tolerogen) coexisting with the maintenance of normal immunocompetence towards other antigens. Anti-T cell monoclonal antibodies allow its induction in organ transplantation and autoimmune disease essentially through the stimulation of regulatory T cells. Very promising results obtained in animals have been recently confirmed in the human in recent-onset insulin-dependent diabetes mellitus with an anti-CD3 antibody (with long-term remission of the disease following a treatment of only six days).     

IgG Fc engineering to modulate antibody effector functions

Therapeutic monoclonal antibodies are among the most effective biotherapeutics to date. An important aspect of antibodies is their ability to bind antigen while at the same time recruit immune effector functions. The majority of approved recombinant monoclonal antibody therapies are of the human IgG1 subclass, which can engage both humoral and cellular components of the immune system. The wealth of information generated about antibodies has afforded investigators the ability to molecularly engineer antibodies to modulate effector functions. Here, we review various antibody engineering efforts intended to improve efficacy and safety relative to the human IgG isotype. Further, we will discuss proposed mechanisms by which engineering approaches led to modified interactions with immune components and provide examples of clinical studies using next generation antibodies.     

Engineered Fc based antibody domains and fragments as novel scaffolds

Therapeutic monoclonal antibodies (mAbs) have been successful for the therapy of a number of diseases mostly cancer and immune disorders. However, the vast majority of mAbs approved for clinical use are full size, typically in IgG1 format. These mAbs may exhibit relatively poor tissue penetration and restricted epitope access due to their large size. A promising solution to this fundamental limitation is the engineering of smaller scaffolds based on the IgG1 Fc region. These scaffolds can be used for the generation of libraries of mutants from which high-affinity binders can be selected. Comprised of the CH2 and CH3 domains, the Fc region is important not only for the antibody effector function but also for its long half-life. This review focuses on engineered Fc based antibody fragments and domains including native (dimeric) Fc and monomeric Fc as well as CH2 and monomeric CH3, and their use as novel scaffolds and binders. The Fc based binders are promising candidate therapeutics with optimized half-life, enhanced tissue penetration and access to sterically restricted binding sites resulting in an increased therapeutic efficacy. This article is part of a Special Issue entitled: Recent advances in molecular engineering of antibody.     

Monoclonal Antibodies to the Human γ2 Subunit of the GABAA/Benzodiazepine Receptors

Abstract: The large intracellular loop (IL) of the γ₂ subunit of the cloned human γ-aminobutyric acid_A (GABA_A) receptor (γ₂IL) was expressed in bacteria as glutathione- S -transferase and staphylococcal protein A fusion proteins. Mice were immunized with the fusion proteins (one protein per animal), and monoclonal antibodies were obtained. Six monoclonal antibodies reacted with the γ₂IL moiety of the fusion proteins. Three of these monoclonal antibodies also immunoprecipitated a high proportion of the GABA_A/benzodiazepine receptors from bovine and rat brain and reacted with a wide 44,000–49,000-M_r peptide band in immunoblots of affinity-purified GABA_A receptors. These monoclonal antibodies are valuable reagents for the molecular characterization of the GABA_A receptors in various brain regions.     

Domain unfolding of monoclonal antibody fragments revealed by non-reducing SDS-PAGE

Monoclonal antibodies and derived fragments are used extensively both experimentally and therapeutically. Thorough characterization of such antibodies is necessary and includes assessment of their thermal and storage stabilities. Thus, assessment of the underlying conformational stabilities of the antibodies is also important. We recently documented that non-reducing SDS-PAGE can be used to assess both monoclonal and polyclonal IgG domain thermal unfolding in SDS. Utilizing this same h2E2 anti-cocaine mAb, in this study we generated and analyzed various mAb antibody fragments to delineate the structural domains of the antibody responsible for the observed discrete bands following various heating protocols and analysis by non-reducing SDS-PAGE. Previously, these domain unfolding transitions and gel bands were hypothesized to stem from known mAb structural domains based on the relative thermal stability of those CH2, CH3, and Fab domains in the absence of SDS, as measured by differential scanning calorimetry. In this study, we generated and analyzed F(ab’)₂, Fab, and Fc fragments, as well as a mAb consisting of only heavy chains, and examined the thermally induced domain unfolding in each of these fragments by non-reducing SDS-PAGE. The results were interpreted and integrated to generate an improved model of thermal unfolding for the mAb IgG in SDS. These results and the model presented should be generally applicable to many monoclonal and polyclonal antibodies and allow novel comparisons of conformational stabilities between chemically or genetically modified versions of a given antibody. Such modified antibodies and antibody drug conjugates are commonly utilized and important for experimental and therapeutic applications.     

Novel asymmetrically engineered antibody Fc variant with superior FcγR binding affinity and specificity compared with afucosylated Fc variant

Fc engineering is a promising approach to enhance the antitumor efficacy of monoclonal antibodies (mAbs) through antibody-dependent cell-mediated cytotoxicity (ADCC). Glyco- and protein-Fc engineering have been employed to enhance FcγR binding and ADCC activity of mAbs; the drawbacks of previous approaches lie in their binding affinity to both FcγRIIIa allotypes, the ratio of activating FcγR binding to inhibitory FcγR binding (A/I ratio) or the melting temperature (T_M) of the C_H2 domain. To date, no engineered Fc variant has been reported that satisfies all these points. Herein, we present a novel Fc engineering approach that introduces different substitutions in each Fc domain asymmetrically, conferring optimal binding affinity to FcγR and specificity to the activating FcγR without impairing the stability. We successfully designed an asymmetric Fc variant with the highest binding affinity for both FcγRIIIa allotypes and the highest A/I ratio compared with previously reported symmetrically engineered Fc variants, and superior or at least comparable in vitro ADCC activity compared with afucosylated Fc variants. In addition, the asymmetric Fc engineering approach offered higher stability by minimizing the use of substitutions that reduce the T_M of the C_H2 domain compared with the symmetric approach. These results demonstrate that the asymmetric Fc engineering platform provides best-in-class effector function for therapeutic antibodies against tumor antigens.     

Highly parallel characterization of IgG Fc binding interactions

Because the variable ability of the antibody constant (Fc) domain to recruit innate immune effector cells and complement is a major factor in antibody activity in vivo, convenient means of assessing these binding interactions is of high relevance to the development of enhanced antibody therapeutics, and to understanding the protective or pathogenic antibody response to infection, vaccination, and self. Here, we describe a highly parallel microsphere assay to rapidly assess the ability of antibodies to bind to a suite of antibody receptors. Fc and glycan binding proteins such as FcγR and lectins were conjugated to coded microspheres and the ability of antibodies to interact with these receptors was quantified. We demonstrate qualitative and quantitative assessment of binding preferences and affinities across IgG subclasses, Fc domain point mutants, and antibodies with variant glycosylation. This method can serve as a rapid proxy for biophysical methods that require substantial sample quantities, high-end instrumentation, and serial analysis across multiple binding interactions, thereby offering a useful means to characterize monoclonal antibodies, clinical antibody samples, and antibody mimics, or alternatively, to investigate the binding preferences of candidate Fc receptors.     

Simple separation of DNA in antibody purification

Producing monoclonal antibodies includes their efficient and simple purification. Growing hybridoma cells in media containing Prolifix, an alternative plant-based substitute for serum, provides supernatants containing large amounts of antibodies and defined low molecular weight additives. Antibodies can easily be separated from these compounds by fast ultrafiltration. However, DNA originating from lysed cells is present in substantial amounts and must be removed for most antibody applications. The present communication provides a fast, cheap, and efficient separation method by precipitating the DNA from a phosphate buffered solution with manganese chloride. Resulting antibodies have a high purity and an unchanged bioactivity. The method is especially valuable for antibodies which lose bioactivity by interactions with chromatographic matrices (as, for example, Sepharose) and can be used for various antibody isotypes.     

人源化抗体研究历程及发展趋势

单克隆抗体从问世到目前广泛应用于临床,经历了一段曲折的发展历程。其中人源化抗体是一个重要的里程碑,并伴随着一系列重大的技术革新,如PCR技术、抗体库技术、转基因动物等。人源化抗体的形式也从最初的嵌合抗体、改型抗体等逐步发展为今天的人抗体。抗体人源化已经成为治疗性抗体的发展趋势,同时各种抗体衍生物也不断涌现,它们从不同角度克服抗体本身的应用局限,也为治疗人类疾病提供了更多利器。对单克隆抗体进行改造使之应用于临床治疗,不仅需要对抗体效应机制进行更细致深入的研究,同时还有赖于对人类免疫系统调控机制的全面精确认识。     

Insertion of scFv into the hinge domain of full-length IgG1 monoclonal antibody results in tetravalent bispecific molecule with robust properties

By simultaneous binding two disease mediators, bispecific antibodies offer the opportunity to broaden the utility of antibody-based therapies. Herein, we describe the design and characterization of Bs4Ab, an innovative and generic bispecific tetravalent antibody platform. The Bs4Ab format comprises a full-length IgG1 monoclonal antibody with a scFv inserted into the hinge domain. The Bs4Ab design demonstrates robust manufacturability as evidenced by MEDI3902, which is currently in clinical development. To further demonstrate the applicability of the Bs4Ab technology, we describe the molecular engineering, biochemical, biophysical, and in vivo characterization of a bispecific tetravalent Bs4Ab that, by simultaneously binding vascular endothelial growth factor and angiopoietin-2, inhibits their function. We also demonstrate that the Bs4Ab platform allows Fc-engineering similar to that achieved with IgG1 antibodies, such as mutations to extend half-life or modulate effector functions.     

基于单个B细胞抗体基因扩增技术筛选马IgG1单克隆抗体*

在马的免疫学研究领域中,由于目前市场上缺乏商业化的马IgG单克隆抗体,使得对马的B细胞研究受到很大阻碍,IgG是B细胞受体(BCR)的重要构成成分,与B细胞分化成熟相关。为了获得马IgG特异性单克隆抗体,利用单个B细胞扩增技术进行抗体筛选。首先,将马IgG蛋白(EqIgG1-C)密码子优化后合成到真核表达载体pcDNA3.4上,纯化出抗原蛋白。随后,使用蛋白质免疫小鼠,分离脾细胞后利用流式细胞术分离特异性单个B细胞,扩增出抗体重链和轻链的可变区基因,用overlapping PCR方法扩增出线性化的完整抗体,并进行鉴定。结果从80个B细胞中获得了27株特异性重组单克隆抗体,并挑选出3株线性结合活性最强的抗体基因构建到表达载体上,共转染Expi293F^TM细胞后表达纯化,经过ELISA和Western blot验证,显示获得的抗体可以和EqIgG1-C蛋白有良好的结合作用。使用该方法可以省时高效的获得特异性抗体,为马的免疫学研究提供了重要研究工具,为鼠单克隆抗体筛选提供了技术拓展。     

Generation and characterization of novel monoclonal antibodies to the Ret receptor tyrosine kinase

Ret is a tyrosine kinase receptor involved in several human diseases germ-line mutations are responsible for multiple endocrine neoplasia type 2 syndromes while somatic mutations of Ret are found in sporadic medullary thyroid carcinomas. In the present work, we describe the generation and characterization of a panel of novel monoclonal antibodies to Ret obtained by immunizing mice with a Ret-FC fusion protein. Fifty-five independent monoclonal antibodies recognize Ret-FC by enzyme linked immunosorbent assay but not a non-related FC fusion protein. Twenty antibodies further characterized recognize Ret expressing cells by flow cytometry. Finally, immunoprecipitation analysis showed that these antibodies recognize Ret mature glycosylated and immature forms. Thus, these monoclonal antibodies could be used as diagnostic tools to detect Ret expression, as well as therapeutic tools to downmodulate Ret or to deliver cytotoxic drugs to malignancies that overexpress Ret as neuroblastomas, medullary and papillary thyroid carcinomas, seminomas, and leukemia.     

Detection of minor immunological differences among human "universal-type" alkaline phosphatases

Two clones of monoclonal antibodies against swine alkaline phosphatase (ALPase; orthophosphoric monoester phosphohydrolase, alkaline optimum, EC 3.1.3.1), which were useful in distinguishing human kidney and bone ALPases from liver ALPase, were successfully raised in mice. On the other hand, polyclonal antibody cross-reacted not only with human kidney ALPase but also with all other human universal type ALPases. The difference in cross-reactivity of monoclonal and polyclonal antibodies may be caused by the specific antigenicity of human enzymes. The monoclonal antibodies were able to recognize minor heterogeneity that could not be distinguished by their enzymatic properties. The present monoclonal antibody preparations will be utilized for clinical as well as basic investigations to detect minor heterogeneity among universal-type ALPases.     

Measurement of serum levels of natalizumab, an immunoglobulin G4 therapeutic monoclonal antibody

Human immunoglobulin G4 (IgG4) is a poor trigger of effector functions and, therefore, is the preferred subclass for therapeutic monoclonal antibodies that merely aim to block their in vivo targets. An example is natalizumab, a recombinant IgG4 antibody directed against α4-integrin and used for treatment of multiple sclerosis. Efficient treatment requires that the pharmacokinetics of therapeutic monoclonal antibodies can be accurately monitored. For natalizumab, this requires special precautions due to recently reported structural peculiarities of human IgG4. Here we describe the development of an assay to determine serum levels of natalizumab. Compared with other IgG subclasses, human IgG4 possesses unique structural properties that influence its interactions in both in vivo and in vitro settings. Thus, IgG4 undergoes Fab arm exchange in vivo, resulting in effectively monovalent antibodies. Furthermore, IgG4 is able to bind to other human and nonhuman IgG via Fc interactions. We demonstrate how these features can interfere with measurement of specific IgG4 and describe how we addressed these issues, resulting in an assay that is not sensitive to Fab arm exchange by natalizumab or to IgG4 Fc interactions.     

Influence of improved FcRn binding on the subcutaneous bioavailability of monoclonal antibodies in cynomolgus monkeys

Engineering monoclonal antibodies (mAbs) with improved binding to the neonatal Fc receptor (FcRn) is a strategy that can extend their in vivo half-life and slow their systemic clearance. Published reports have predominantly characterized the pharmacokinetics of mAbs after intravenous administration. Recently, studies in mice suggest FcRn may also play a role in affecting the subcutaneous bioavailability of mAbs. Herein, we examined whether five mAbs engineered with the T250Q/M428L Fc mutations that improved their FcRn interactions, and subsequently their in vivo pharmacokinetics after intravenous administration, had improved subcutaneous bioavailability compared with their wild-type counterparts in cynomolgus monkeys. Similar to the intravenous administration findings, the pharmacokinetic profiles of our variant mAbs after subcutaneous injection showed improved half-life or clearance. In contrast, a clear effect was not observed on the subcutaneous bioavailability. We expect that while FcRn may play a role in determining mAb subcutaneous bioavailability, multiple biopharmaceutical and physiological factors are likely to influence the success of engineering strategies aimed at targeting this pathway for improving bioavailability.     

Recent advances in the generation of human monoclonal antibody

The use of monoclonal antibodies (mAbs) has now gained a niche as an epochal breakthrough in medicine. Engineered antibodies (Abs) currently account for over 30% of biopharmaceuticals in clinical trials. Several methods to generate human mAbs have evolved, such as (1) immortalization of antigen-specific human B cell hybridoma technology, (2) generation of chimeric and humanized antibody (Ab) from mouse Ab by genetic engineering, (3) acquisition of antigen-specific human B cells by the phage display method, and (4) development of transgenic mice for producing human mAbs. Besides these technologies, we have independently developed a method to generate human mAbs by combining the method of in vitro immunization using peripheral blood mononuclear cells and the phage display method. In this paper, we review the developments in these technologies for generating human mAbs.     

bisFabs: Tools for rapidly screening hybridoma IgGs for their activities as bispecific antibodies

Bispecific antibodies are a growing class of therapeutic molecules. Many of the current bispecific formats require DNA engineering to convert the parental monoclonal antibodies into the final bispecific molecules. We describe here a method to generate bispecific molecules from hybridoma IgGs in 3–4 d using chemical conjugation of antigen-binding fragments (Fabs) (bisFabs). Proteolytic digestion conditions for each IgG isotype were analyzed to optimize the yield and quality of the final conjugates. The resulting bisFabs showed no significant amounts of homodimers or aggregates. The predictive value of murine bisFabs was tested by comparing the T-cell redirected cytotoxic activity of a panel of antibodies in either the bisFab or full-length IgG formats. A variety of antigens with different structures and expression levels was used to extend the comparison to a wide range of binding geometries and antigen densities. The activity observed for different murine bisFabs correlated with those observed for the full-length IgG format across multiple different antigen targets, supporting the use of bisFabs as a screening tool. Our method may also be used for the screening of bispecific antibodies with other mechanisms of action, allowing for a more rapid selection of lead therapeutic candidates.