A rapid procedure for the isolation of plasmid DNA from environmental bacteria.

The INSTA-MINI-PREP method, a rapid protocol for plasmid DNA extraction, was originally developed to prepare plasmid DNA from 1 to 3 ml miniprep Escherichia coli cultures. Direct extraction of plasmid DNA is achieved by a two-phase solution which is separated by centrifugation in the presence of the INSTA-PREP gel barrier material. This method has been successfully tested on various environmental Salmonella strains, although it was not suitable for Pseudomonas aeruginosa and enterococci strains. The INSTA-MINI-PREP method is a new alternative procedure to screen plasmid contents of Salmonella and E. coli strains rapidly and easily.     

A simple method of genomic DNA extraction suitable for analysis of bulk fungal strains

Aims: A simple and rapid method (designated thermolysis) for extracting genomic DNA from bulk fungal strains was described. Methods and Results: In the thermolysis method, a few mycelia or yeast cells were first rinsed with pure water to remove potential PCR inhibitors and then incubated in a lysis buffer at 85°C to break down cell walls and membranes. This method was used to extract genomic DNA from large numbers of fungal strains (more than 92 species, 35 genera of three phyla) isolated from different sections of natural Ophiocordyceps sinensis specimens. Regions of interest from high as well as single‐copy number genes were successfully amplified from the extracted DNA samples. The DNA samples obtained by this method can be stored at ?20°C for over 1 year. Conclusions: The method was effective, easy and fast and allowed batch DNA extraction from multiple fungal isolates. Significance and Impact of Study: Use of the thermolysis method will allow researchers to obtain DNA from fungi quickly for use in molecular assays. This method requires only minute quantities of starting material and is suitable for diverse fungal species.     

Mould and yeast identification in archival settings: Preliminary results on the use of traditional methods and molecular biology options in Portuguese archives

This project was developed to fully assess the indoor air quality in archives and libraries from a fungal flora point of view. It uses classical methodologies such as traditional culture media - for the viable fungi - and modern molecular biology protocols, especially relevant to assess the non-viable fraction of the biological contaminants. Denaturing high-performance liquid chromatography (DHPLC) has emerged as an alternative to denaturing gradient gel electrophoresis (DGGE) and has already been applied to the study of a few bacterial communities. We propose the application of DHPLC to the study of fungal colonization on paper-based archive materials. This technology allows for the identification of each component of a mixture of fungi based on their genetic variation. In a highly complex mixture of microbial DNA this method can be used simply to study the population dynamics, and it also allows for sample fraction collection, which can, in many cases, be immediately sequenced, circumventing the need for cloning. Some examples of the methodological application are shown. Also applied is fragment length analysis for the study of mixed Candida samples. Both of these methods can later be applied in various fields, such as clinical and sand sample analysis. So far, the environmental analyses have been extremely useful to determine potentially pathogenic/toxinogenic fungi such as Stachybotrys sp., Aspergillus niger, Aspergillus fumigatus, and Fusarium sp. This work will hopefully lead to more accurate evaluation of environmental conditions for both human health and the preservation of documents.     

Comparison of screening methods for high-throughput determination of oil yields in micro-algal biofuel strains

The phenotypic and phylogenetic diversity of micro-algae capable of accumulating triacylglycerols provides a challenge for the accurate determination of biotechnological potential. High-yielding strains are needed to improve economic viability and their compositional information is required for optimizing biodiesel properties. To facilitate a high-throughput screening programme, a very rapid direct-derivatization procedure capable of extracting lyophilized material for GC analysis was compared with a scaled-down Folch-based method. This was carried out on ten micro-algal strains from 6 phyla where the more rapid direct-derivatization approach was found to provide a more reliable measure of yield. The modified Folch-based procedure was found to substantially underestimate oil yield in one Chlorella species (P?<?0.01). In terms of fatty acid composition however, the Folch procedure proved to be slightly better in recovering polyunsaturated fatty acids, in six out of the ten strains. Therefore, direct-derivatization is recommended for rapid determination of yields in screening approaches but can provide slightly less compositional accuracy than solvent-based extraction methods.     

A broadly applicable method for extraction and characterization of mycosporines and mycosporine-like amino acids of terrestrial, marine and freshwater origin

A universal method allowing simultaneous extraction and analysis of diverse ultraviolet-B-absorbing compounds belonging to mycosporines and mycosporine-like amino acids (MAAs) is presented. Mycosporines and MAAs are found both in prokaryotes and eukaryotes and possess photoprotective properties. Our method was successfully tested by screening 31 cyanobacterial, 11 actinomycete and 45 fungal strains for their mycosporine and MAA content. The majority of the isolates tested originated from subaerial rock surfaces and were inherently protected from excessive sun irradiation. The new method includes a solid-liquid extraction procedure, followed by a reversed phase liquid chromatography/mass spectrometry. Eight different mycosporines and five MAAs were efficiently separated and identified by their retention times, absorption maxima and fragmentation patterns. Mycosporines were found both in rock-inhabiting fungi and cyanobacteria and consequently may render an ecological marker of these peculiar terrestrial environments.     

Towards an efficient phenotypic classification of fungal cultures from environmental samples using digital imagery

The use of the analysis technique proposed here, based on functions of the digital imagery software eCognition professional 4.0, provides an objective and effective method for the assessment of fungal diversity in the context of environmental screening projects. It is demonstrated that strains of cultivated fungi can be quantitatively segregated with regard to specific false-color patterns, which reflect even the merest differences in pigment composition, indicating genotypic or phylogenetic disparities. Due to resolving subtle differences of phenotypic traits, a rapid recognition of (duplicate) genotypes is possible which allows the direct inference of the mycobial diversity of given environmental samples and a semi-quantitative or qualitative estimation of the fungal community structure. Two sets of image data from cultures were used in the current study: a minor set being applied for the definition of color classes and for usage in an image reference array, and a second, extended dataset for method validation. An objective assignment, based on false-color classification, was carried out by cluster analysis. High reproducibility using standardized methods makes this design an effective pre-screening option in the field of microbial environmental research. The application of false-color imagery may therefore be applied in fungal monitoring studies as a meaningful procedure supplementing molecular analyses by the identification of new strains irrespective of their relatedness.     

Serological Grouping of Hemolytic Streptococci by Counter-Immunoelectrophoresis

The counter-immunoelectrophoresis (CIE) method of grouping streptococci was more sensitive than the capillary precipitin method. The precipitate was easier to read, and the test was simple to perform and required fewer reagents. An autoclave-Pronase-B extraction procedure is described and was found superior to either acid, Pronase-B, or the autoclave extraction procedures for recovering groupable polysaccharide from different strains of streptococcal groups A, B, C, D, F, and E. Data obtained from over 400 strains indicate that the sensitivity of the CIE and a more efficient extraction of groupable polysaccharide provides a simple method for rapid diagnosis of streptococcal infections.     

Document image binarisation using a supervised neural network

Advances in digital technologies have allowed us to generate more images than ever. Images of scanned documents are examples of these images that form a vital part in digital libraries and archives. Scanned degraded documents contain background noise and varying contrast and illumination, therefore, document image binarisation must be performed in order to separate foreground from background layers. Image binarisation is performed using either local adaptive thresholding or global thresholding; with local thresholding being generally considered as more successful. This paper presents a novel method to global thresholding, where a neural network is trained using local threshold values of an image in order to determine an optimum global threshold value which is used to binarise the whole image. The proposed method is compared with five local thresholding methods, and the experimental results indicate that our method is computationally cost-effective and capable of binarising scanned degraded documents with superior results.     

Rapid semi-quantitative fluorimetric determination of citrinin in fungal cultures isolated from cheese and cheese factories

A new rapid semi-quantitative fluorimetric assay for citrinin production testing in mould cultures has been developed. The chemical structure of the citrinin makes it a weak native fluorophore. This fluorescence can be strongly enhanced in an acidic environment. A standard curve where the concentration of HCl needed to show the yellow fluorescence signal of different concentrations of citrinin was established, thus providing a semi-quantitative method to prove the capacity of toxin production of fungal cultures. Two Penicillium strains from the Spanish National Collection of Type Cultures, were studied for the toxin production on YES broth at 25°C for 21 d. The culture was assayed daily for the presence/absence and quantification of citrinin by adding the HCl concentration set, and also quantified by RP-HPLC as a confirmation procedure. Experiments demonstrate that 5 d are necessary to show the presence of citrinin. As an illustration, a total of 48 strains of Penicillium isolated from cheese and cheese factories were analysed with the proposed method.     

Evaluation of rapid DNA extraction methods for the quantitative detection of fungi using real-time PCR analysis

Three comparatively rapid methods for the extraction of DNA from fungal conidia and yeast cells in environmental (air, water and dust) samples were evaluated for use in real-time PCR (TaqMan™) analyses. A simple bead milling method was developed to provide sensitive, accurate and precise quantification of target organisms in air and water (tap and surface) samples. However, quantitative analysis of dust samples required further purification of the extracted DNA by a streamlined silica adsorption procedure.     

一种快速高效获取丝状真菌PCR反应模板的方法

建立一种快速高效获取丝状真菌PCR反应模板的方法,提高丝状真菌PCR鉴定效率。通过单因素法对机械破壁联合微波法进行条件优化,利用优化后的方法获取13株不同种属丝状真菌的PCR反应模板,同时与Chelex-100法、机械破壁法作对比,以试剂盒抽提法作为阳性对照,进行ITS序列扩增,琼脂糖凝胶电泳检测扩增结果。机械破壁联合微波法获取丝状真菌PCR反应模板的最佳条件为40 Hz机械破壁1 min、微波700 W高温裂解3 min,采取该法与试剂盒抽提法获得的模板均成功扩增13株不同种属丝状真菌ITS序列,且PCR鉴定结果一致;Chelex-100法获得的模板成功扩增6株丝状真菌ITS序列;机械破壁法获得的模板虽成功扩增9株丝状真菌ITS序列,但扩增效果欠佳。机械破壁联合微波法能够有效获取丝状真菌PCR反应模板,与试剂盒抽提法相比具有操作简便、快速高效的优点,提高丝状真菌PCR鉴定效率。     

A simple PCR/RFLP analysis can differentiate between Candida albicans, Aspergillus niger, and Aspergillus fumigatus

The clinical management of immunocompromised patients depends on the rapid identification of infectious agents such as fungal pathogens. The procedure described here for accomplishing this uses a sensitive polymerase chain reaction method, previously reported, combined with restriction-enzyme digestion to distinguish between Candida and Aspergillus species and to classify Aspergillus strains.     

An ATP Bioluminescence Assay Applicable to Rapid Fluconazole Susceptibility Testing of Dermatophytes

An ATP bioluminescence assay as a rapid reference method for fluconazole (FLCZ) susceptibility testing of dermatophytes, as well as yeasts, was developed and evaluated by comparing it with viability, turbidity and fungal protein content-based conventional methods. FLCZ susceptibility results obtained with strains of Candida albicans and dermatophytes by the bioluminescence method in high-resolution medium were well correlated with those obtained by conventional methods currently used in clinical microbiology laboratories or reported previously, including a broth dilution method by the National Committee for Clinical Laboratory Standards (NCCLS). Thus, ATP bioluminescence assay can be used to monitor fungal growth in liquid culture media. The procedure has considerable potential for the rapid testing of FLCZ susceptibility of dermatophytes and other fungi.     

Detection of viable fungal spores contaminant on documents and rapid control of the effectiveness of an ethylene oxide disinfection using ATP assay

Filamentous fungi are able to damage and even destroy archival and library materials. Nowadays the conventional method for detecting such micro‐organisms is to put them in cultures but such methods are laborious and time‐consuming. ATP methodology has been widely applied in other domains and its success on bacteria and yeast has been demonstrated. Several commercial reagent kits are available but they did not give satisfactory results on spores mould. We have elaborated new extraction strategies specific to fungi. A comparison of 42 extraction protocols of ATP from fungal spores was carried out. Extraction at 100°C with DMSO 90% in a Tris–acetate–EDTA buffer proved to be the best method. The viability of cells is estimated by the determination of adenylate energy charge (EC). We applied our method successfully on well‐known species such as Aspergillus flavus, A. niger, A. fumigatus, A. versicolor, Neosartorya fischeri, Eurotium chevalieri, Penicillium chrysogenum, Chaetomium globosum and Ulocladium spp. The results suggest that the ATP bioluminescence assay provides a sensitive and time‐saving method for detecting viable fungal spores. The validity of the procedure was also tested on spores killed by steam and on spores treated with ethylene oxide. We showed that EC determination could be used for a rapid control of the effectiveness of a disinfection process performed with ethylene oxide. Copyright © 2003 John Wiley & Sons, Ltd.     

An assessment of the efficiency of fungal DNA extraction methods for maximizing the detection of medically important fungi using PCR

To date, no single reported DNA extraction method is suitable for the efficient extraction of DNA from all fungal species. The efficiency of extraction is of particular importance in PCR-based medical diagnostic applications where the quantity of fungus in a tissue biopsy may be limited. We subjected 16 medically relevant fungi to physical, chemical and enzymatic cell wall disruption methods which constitutes the first step in extracting DNA. Examination by light microscopy showed that grinding with mortar and pestle was the most efficient means of disrupting the rigid fungal cell walls of hyphae and conidia. We then trialled several published DNA isolation protocols to ascertain the most efficient method of extraction. Optimal extraction was achieved by incorporating a lyticase and proteinase K enzymatic digestion step and adapting a DNA extraction procedure from a commercial kit (MO BIO) to generate high yields of high quality DNA from all 16 species. DNA quality was confirmed by the successful PCR amplification of the conserved region of the fungal 18S small-subunit rRNA multicopy gene.     

Application of molecular techniques for identification of fungal communities colonising paper material

Archives and libraries all over the world suffer from biodeterioration of writings caused by microorganisms, especially fungi. With traditionally used culture-dependent methods, only a small amount of effectively colonising organisms is detected. Restoration and maintenance of written cultural heritage is therefore problematic due to incomplete knowledge of the deterioration agents.In the present study, culture-independent molecular methods were applied to identify fungal communities colonising paper samples of different composition and age. Nucleic-acid-based strategies targeting the internally transcribed spacer (ITS) regions, which are nested in the nuclear rDNA repeats, were selected to investigate the fungal diversity on paper. The ITS regions possess a high variation among taxonomically distinct fungal species and even within the species.With this aim, several molecular biological methods were optimised for working with paper materials. Here, we introduce a DNA extraction protocol, which allowed the direct extraction of PCR-amplifiable DNA from samples derived from different kinds of paper. The DNA extracts were used to amplify either the ITS1 or ITS2 region by using different fungi-specific primer sets. The ITS-amplified regions were subsequently analysed by denaturing gradient gel electrophoresis (DGGE). Conditions for DGGE analysis, gradient, voltage, and running time, were established to accurately discriminate different fungal species in complex communities. Pure fungal strains were used to constitute a marker for further comparative investigations of historic papers.     

A simple PCR/RFLP analysis can differentiate between Candida albicans,Aspergillus niger,and Aspergillus fumigatus

The clinical management of immunocompromised patients depends on the rapid identification of infectious agents such as fungal pathogens. The procedure described here for accomplishing this uses a sensitive polymerase chain reaction method, previously reported, combined with restriction-enzyme digestion to distinguish between Candida and Aspergillus species and to classify Aspergillus strains.     

Culture-dependent and culture-independent diversity within the obligate marine actinomycete genus Salinispora

Salinispora is the first obligate marine genus within the order Actinomycetales and a productive source of biologically active secondary metabolites. Despite a worldwide, tropical or subtropical distribution in marine sediments, only two Salinispora species have thus far been cultivated, suggesting limited species-level diversity. To further explore Salinispora diversity and distributions, the phylogenetic diversity of more than 350 strains isolated from sediments collected around the Bahamas was examined, including strains cultured using new enrichment methods. A culture-independent method, using a Salinispora-specific seminested PCR technique, was used to detect Salinispora from environmental DNA and estimate diversity. Overall, the 16S rRNA gene sequence diversity of cultured strains agreed well with that detected in the environmental clone libraries. Despite extensive effort, no new species level diversity was detected, and 97% of the 105 strains examined by restriction fragment length polymorphism belonged to one phylotype (S. arenicola). New intraspecific diversity was detected in the libraries, including an abundant new phylotype that has yet to be cultured, and a new depth record of 1,100 m was established for the genus. PCR-introduced error, primarily from Taq polymerase, significantly increased clone library sequence diversity and, if not masked from the analyses, would have led to an overestimation of total diversity. An environmental DNA extraction method specific for vegetative cells provided evidence for active actinomycete growth in marine sediments while indicating that a majority of sediment samples contained predominantly Salinispora spores at concentrations that could not be detected in environmental clone libraries. Challenges involved with the direct sequence-based detection of spore-forming microorganisms in environmental samples are discussed.     

Culture-Dependent and Culture-Independent Diversity within the Obligate Marine Actinomycete Genus Salinispora

Salinispora is the first obligate marine genus within the order Actinomycetales and a productive source of biologically active secondary metabolites. Despite a worldwide, tropical or subtropical distribution in marine sediments, only two Salinispora species have thus far been cultivated, suggesting limited species-level diversity. To further explore Salinispora diversity and distributions, the phylogenetic diversity of more than 350 strains isolated from sediments collected around the Bahamas was examined, including strains cultured using new enrichment methods. A culture-independent method, using a Salinispora-specific seminested PCR technique, was used to detect Salinispora from environmental DNA and estimate diversity. Overall, the 16S rRNA gene sequence diversity of cultured strains agreed well with that detected in the environmental clone libraries. Despite extensive effort, no new species level diversity was detected, and 97% of the 105 strains examined by restriction fragment length polymorphism belonged to one phylotype (S. arenicola). New intraspecific diversity was detected in the libraries, including an abundant new phylotype that has yet to be cultured, and a new depth record of 1,100 m was established for the genus. PCR-introduced error, primarily from Taq polymerase, significantly increased clone library sequence diversity and, if not masked from the analyses, would have led to an overestimation of total diversity. An environmental DNA extraction method specific for vegetative cells provided evidence for active actinomycete growth in marine sediments while indicating that a majority of sediment samples contained predominantly Salinispora spores at concentrations that could not be detected in environmental clone libraries. Challenges involved with the direct sequence-based detection of spore-forming microorganisms in environmental samples are discussed.     

实验动物皮肤病原真菌DNA快速少量提取法

PCR技术应用于实验动物皮肤病原真菌检测,方法简单、省时。但是,真菌的DNA提取较为困难。本文推荐一种既简单又经济快速的提取皮肤真菌DNA的方法,并能成功用于实验动物皮肤病原真菌质量检测研究。