Kinetics investigation of the hydrogen abstraction reaction between CH<Subscript>3</Subscript>SS and CN radicals

The reaction mechanisms and rates for the H abstraction reactions between CH₃SS and CN radicals in the gas phase were investigated with density functional theory (DFT) methods. The geometries, harmonic vibrational frequencies, and energies of all stationary points were obtained at B3PW91/6-311G(d,p) level of theory. Relationships between the reactants, intermediates, transition states and products were confirmed, with the frequency and the intrinsic reaction coordinate (IRC) analysis at the same theoretical level. High accurate energy information was provided by the G3(MP2) method combined with the standard statistical thermodynamics. Gibbs free energies at 298.15 K for all of the reaction steps were reported, and were used to describe the profile diagrams of the potential energy surface. The rate constants were evaluated with both the classical transition state theory and the canonical variational transition state theory, in which the small-curvature tunneling correction was included. A total number of 9 intermediates (IMs) and 17 transition states (TSs) were obtained. It is shown that IM1 is the most stable intermediate by the largest energy release, and the channel of CH₃SS?+?CN?→?IM3?→?TS10?→?P1(CH₂SS?+?HCN) is the dominant reaction with the lowest energy barrier of 144.7 kJ mol^?1. The fitted Arrhenius expressions of the calculated CVT/SCT rate constants for the rate-determining step of the favorable channel is k =7.73?×?10⁶? T ^1.40exp(?14,423.8/T) s^?1 in the temperature range of 200–2000 K. The apparent activation energy E _a(app.) for the main channel is ?102.5 kJ mol^?1, which is comparable with the G3(MP2) energy barrier of ?91.8 kJ mol^?1 of TS10 (relative to the reactants).     

Ab initio studies on the decomposition kinetics of CF<Subscript>3</Subscript>OCF<Subscript>2</Subscript>O radical

The present study deals with the decomposition of CF₃OCF₂O radical formed from a hydrofluoroether, CF₃OCHF₂ (HFE-125), in the atmosphere. The study is performed using ab initio quantum mechanical methods. Two plausible pathways of decomposition of the titled species have been considered, one involving C-O bond scission and the other occurring via F atom elimination. The geometries of the reactant, products and transition states involved in the decomposition pathways are optimized and characterized at DFT (B3LYP) level of theory using 6-311G(d,p) basis set. Single point energy calculations have been performed at G2M(CC,MP2) level of theory. Out of the two prominent decomposition channels considered, the C-O bond scission is found to be dominant involving a barrier height of 15.3 kcal mol⁻¹ whereas the F-elimination path proceeds with a barrier of 26.1 kcal mol⁻¹. The thermal rate constants for the above two decomposition pathways are evaluated using canonical transition state theory (CTST) and these are found to be 1.78 × 10⁶ s⁻¹ and 2.83 × 10⁻⁷ s⁻¹ for C-O bond scission and F-elimination respectively at 298 K and 1 atm pressure. Transition states are searched on the potential energy surfaces involved during the decomposition channels and each of the transition states is characterized. The existence of transition states on the corresponding potential energy surface is ascertained by performing intrinsic reaction coordinate (IRC) calculation.     

The addition reactions of germylenoid H<Subscript>2</Subscript>GeAlCl<Subscript>3</Subscript> with ethylene: a theoretical investigation

Theoretical calculations using the M062X and QCISD methods were performed on the addition reactions of the aluminum germylenoid H₂GeAlCl₃ with ethylene. The most two stable structures of germylenoid H₂GeAlCl₃, i.e., the p-complex and three-membered ring structures, respectively, were employed as reactants. The calculated results indicate that, for the p-complex, H₂GeAlCl₃ there are two pathways, I and II, of which path I involves just one transition state, while path II involves two transition states between reactants and products. Comparing the reaction barrier heights of path I (44.6 kJ mol^?1) and II (37.6 kJ mol^?1), the two pathways are competitive, with similar barriers under the same conditions, while for the three-membered ring structure, another two pathways, III and IV, also exist. Path III has one transition state; however, in path IV, two transition states exist. By comparing their barrier heights, path III (barrier height 39.2 kJ mol^?1) could occur more easily than path IV (barrier height 92.8 kJ mol^?1). Considering solvent effects on these addition reactions, the PCM model and CH₂Cl₂ solvent were used in calculations, and the calculated results demonstrate that CH₂Cl₂ solvent is unfavorable for the reactions, except for path II. In CH₂Cl₂ solvent, paths II and III are more favorable than paths I and IV.     

Computational study of the NO,SO<Subscript>2</Subscript>, and NH<Subscript>3</Subscript> adsorptions on fragments of 3N-graphene and Al/3N graphene

The adsorption properties of common gas molecules (NO, NH₃, and SO₂) on the surface of 3N-graphene and Al/3N graphene fragments are investigated using density functional theory. The adsorption energies have been calculated for the most stable configurations of the molecules on the surface of 3N-graphene and Al/3N graphene fragments. The adsorption energies of Al/3N graphene-gas systems are ?220.5 kJ mol^?1 for Al/3NG-NO, ?111.9 kJ mol^?1 for Al/3NG-NH₃, and ?347.7 kJ mol^?1 for Al/3NG-SO₂, respectively. Compared with the 3N-graphene fragment, the Al/3N graphene fragment has significant adsorption energy. Furthermore, the molecular orbital, density of states, and electron densities distribution were used to explore the interaction between these molecules and the surface. We found that orbital hybridization exists between these molecules and the Al/3N graphene surface, which indicates that doping Al significantly increases the interaction between the gas molecules and Al/3N graphene. In addition, compared with Li, Al can more powerfully enhance adsorption of the 3N-graphene fragment. The results indicate that Al/3N graphene can be viewed as a new nanomaterial adsorbent for NO, NH₃, and SO₂.     

The polythiophene molecular segment as a sensor model for H<Subscript>2</Subscript>O,HCN, NH<Subscript>3</Subscript>, SO<Subscript>3</Subscript>, and H<Subscript>2</Subscript>S: a density functional theory study

Studying the interaction of some atmospheric gases (H₂O, HCN, NH₃, SO₃ and H₂S) with 3PT oligomers is important in the development of polymeric sensors for gas detection. In the present study, we studied the relaxed geometries, interaction energies, charge analysis, HOMO–LUMO orbital analysis, and UV–vis spectra of all interacted systems using first-principles density functional theory (DFT). All these analyses indicated the potential of polythiophene as an inexpensive polymeric sensor for the analytes mentioned. Interaction energy values of ?19.90, ?19.66, ?14.01, ?8.70, and ?4.76 kJ mol^?1 were achieved for adsorption of SO₃, H₂O, NH₃, HCN, and H₂S on 3PT, respectively. Consequently, clarification of their physical parameters became the major focus of this study.     

<Emphasis Type="Italic">Ab initio</Emphasis> and DFT investigation of electrophilic addition reaction of bromine to <Emphasis Type="Italic">endo,endo</Emphasis>-tetracyclo[4.2.1.1<Superscript>3,6</Superscript>.0<Superscript>2,7</Superscript>]dodeca-4,9-diene

Full geometric optimization of endo,endo-tetracyclo[4.2.1.1^3,6.0^2,7]dodeca-4,9-diene (TTDD) has been carried out by ab initio and DFT/B3LYP methods and the structure of the molecule investigated. The double bonds of TTDD molecule are endo pyramidalized. The structure of π-orbitals and their mutual interactions for TTDD molecule were investigated. The cationic intermediates and products obtained as a result of the addition reaction have been studied using the HF/6-311G(d), HF/6-311G(d,p) and B3LYP/6-311G(d) methods. The bridged bromonium cation isomerized into the more stable N- and U-type cations and the difference between the stability of these cations is small. The N- and U-type reaction products are obtained as a result of the reaction, which takes place via the cations in question. The stability of exo, exo and exo, endo isomers of N-type product are nearly the same and the formation of both isomers is feasible. The U-type product basically formed from the exo, exo-isomer. Although the U-type cation was 0.68 kcal mol⁻¹ more stable than the N-type cation, the U-type product was 4.79 kcal mol⁻¹ less stable than the N-type product. Figure The energy diagram of TTDD–Br₂ system (kcal mol⁻¹)(MP2/6-311G*//HF/6-311G*)     

Effects of NH<Subscript>4</Subscript>CL application and removal on astrocytes and endothelial cells

Background

Hepatic encephalopathy (HE) is a complex disorder associated with increased ammonia levels in the brain. Although astrocytes are believed to be the principal cells affected in hyperammonemia (HA), endothelial cells (ECs) may also play an important role by contributing to the vasogenic effect of HA.

Methods

Following acute application and removal of NH₄Cl on astrocytes and endothelial cells, we analyzed pH changes, using fluorescence imaging with BCECF/AM, and changes in intracellular Ca²⁺ concentration ([Ca²⁺]_i), employing fluorescence imaging with Fura-2/AM. Using confocal microscopy, changes in cell volume were observed accompanied by changes of [Ca²⁺]_i in astrocytes and ECs.

Results

Exposure of astrocytes and ECs to 1 – 20 mM NH₄Cl resulted in rapid concentration-dependent alkalinization of cytoplasm followed by slow recovery. Removal of the NH₄Cl led to rapid concentration-dependent acidification, again followed by slow recovery. Following the application of NH₄Cl, a transient, concentration-dependent rise in [Ca²⁺]_i in astrocytes was observed. This was due to the release of Ca²⁺ from intracellular stores, since the response was abolished by emptying intracellular stores with thapsigargin and ATP, and was still present in the Ca²⁺-free bathing solution. The removal of NH₄Cl also led to a transient concentration-dependent rise in [Ca²⁺]_i that resulted from Ca²⁺ release from cytoplasmic proteins, since removing Ca²⁺ from the bathing solution and emptying intracellular Ca²⁺ stores did not eliminate the rise. Similar results were obtained from experiments on ECs. Following acute application and removal of NH₄Cl no significant changes in astrocyte volume were detected; however, an increase of EC volume was observed after the administration of NH₄Cl, and EC shrinkage was demonstrated after the acute removal of NH₄Cl.

Conclusions

This study reveals new data which may give a more complete insight into the mechanism of development and treatment of HE.

     

Noble gas supported boron-pentagonal clusters B<Subscript>5</Subscript>Ng<Subscript>n</Subscript><Superscript>3+</Superscript>: exploring the structures and bonding

A novel type of trivalent BNg five-membered cational species B₅Ng_n³⁺(Ng = He~Rn, n = 1~5) has been found and investigated theoretically using the B3LYP and MP2 methods with the def2-QZVPPD and def2-TZVPPD basis sets. The geometry, harmonic vibrational frequencies, bond energies, charge distribution, bond nature, aromaticity, and energy decomposition analysis of these structures were reported. The calculated B?Ng bond energy is quite large (the averaged bond energy is in the range of 209.2~585.76 kJ mol^-1) for heavy rare gases and increases with the Ng atomic number. The analyses of the molecular wavefunction show that in the BNg compounds of heavy Ng atoms Ar~Rn, the B?Ng bonds are of typical covalent character. Nuclear independent chemical shifts display that both B₅³⁺ and B₅Ng_n³⁺(n=1~5) have obvious aromaticity. Energy decomposition analysis shows that these BNg compounds are mainly stabilized by the σ-donation from the Ng valence p orbital to the B₅³⁺ LUMO. These findings offer valuable clues toward the design and synthesis of new stable Ng-containing compounds.     

DFT study of isomers of the ruthenium dihydride complex RuH<Subscript>2</Subscript>(CO)<Subscript>2</Subscript>(AsMe<Subscript>2</Subscript>Ph)<Subscript>2</Subscript>

A density functional theory (DFT) study of cct-As, ccc, and cct-CO isomers of the ruthenium dihydride complex RuH₂(CO)₂(AsMe₂Ph)₂ is reported (see Scheme for the labeling isomer 34 structures of RuH₂(CO)₂(AsMe₂Ph)₂). Complex geometries and relative energies of different isomers have been calculated with both B3LYP and M06-2X functionals. The results show that the B3LYP calculated Boltzmann populations of cct-As, ccc, and cct-CO isomers are 65.5, 34.2, and 0.3%, respectively. These are in better agreement with the experimental data than those calculated at the M06-2X level. However, the calculations of ¹H NMR chemical shifts were found to be better described with M06-2X than with B3LYP or with HF level of theories. In addition, a transition state between the two most stable isomers was determined through DFT/(B3LYP or M06-2X) calculations.

Open image in new window

Graphical Abstract Scheme: Labeling structure of RuH₂(CO)₂(AsMe₂Ph)₂

     

Theoretical study of N<Subscript>4</Subscript>X (X = O,S, Se) systems

A series of N₄X (X = O, S, Se) compounds have been examined with ab initio and density functional theory (DFT) methods. To our knowledge, these compounds, except for the C_2v ring and the C_3v towerlike isomers of N₄O, are first reported here. The ring structures are the most energetically favored for N₄X (X = O and S) systems. For N₄Se, the cagelike structure is the most energetically favored. Several decomposition and isomerization pathways for the N₄X species have been investigated. The dissociation of C_2v ring N₄O and N₄S structures via ring breaking and the barrier height are only 1.1 and −0.2 kcal mol⁻¹ at the CCSD(T)/6-311+G*//MP2/6-311+G* level of theory. The dissociation of the cagelike N₄X species is at a cost of 12.1–16.2 kcal mol⁻¹. As for the towerlike and triangle bipyramidal isomers, their decomposition or isomerization barrier heights are all lower than 10.0 kcal mol⁻¹. Although the C_S cagelike N₄S isomer has a moderate isomerization barrier (18.3–29.1 kcal mol⁻¹), the low dissociation barrier (−1.0 kcal mol⁻¹) indicates that it will disappear when going to the higher CCSD(T) level. Electronic supplementary material The online version of this article (doi:) contains supplementary material, which is available to authorized users.     

Molecular properties of metal difluorides and their interactions with CO<Subscript>2</Subscript> and H<Subscript>2</Subscript>O molecules: a DFT investigation

A computational study of metal difluorides (MF₂; M = Ca to Zn) and their interactions with carbon dioxide and water molecules was performed. The structural parameter values obtained and the results of AIM analysis and energy decomposition analysis indicated that the Ca–F bond is weaker and less ionic than the bonds in the transition metal difluorides. A deformation density plot revealed the stablizing influence of the Jahn–Teller effect in nonlinear MF₂ molecules (e.g., where M= Sc, Ti, Cr). An anaysis of the metal K-edge peaks of the difluorides showed that shifts in the edge energy were due to the combined effects of the ionicity, effective nuclear charge, and the spin state of the metal. The interactions of CO₂ with ScF₂ (Scc3 geometry) and TiF₂ (Tic2 geometry) caused CO₂ to shift from its usual linear geometry to a bent geometry (η²(C=O) binding mode), while it retained its linear geometry (η¹(O) binding mode) when it interacted with the other metal difluorides. Energy decomposition analysis showed that, among the various geometries considered, the Scc3 and Tic2 geometries possessed the highest interaction energies and orbital interaction energies. Heavier transition metal difluorides showed stronger affinities for H₂O, whereas the lighter transition metal (Sc and Ti) difluorides preferred CO₂. Overall, the results of this study suggest that fluorides of lighter transition metals with partially filled d orbitals (e.g., Sc and Ti) could be used for CO₂ capture under moist conditions.

Open image in new window

Graphical abstract Interaction of metal difluorides with carbon dioxide and water

     

Density functional theory investigation of electrophilic addition reaction of bromine to tricyclo[4.2.2.22,5]dodeca-1,5-diene1

The geometry and the electronic structure of tricyclo[4.2.2.2^2,5]dodeca-1,5-diene (TCDD) molecule were investigated by DFT/B3LYP and /B3PW91 methods using the 6-311G(d,p) and 6-311++G(d,p) basis sets. The double bonds of TCDD molecule are syn-pyramidalized. The structure of π-orbitals and their mutual interactions for TCDD molecule were investigated. Potential energy surface (PES) of the TCDD-Br₂ system was studied by B3LYP/6-311++G(d,p) method and the configurations [molecular charge-transfer (CT) complex, transition states (TS1 and TS2), intermediate (INT) and product (P)] corresponding to the stationary points (minima or saddle points) were determined. Initially, a molecular CT-complex forms between Br₂ and TCDD. With a barrier of 22.336 kcal mol^-1 the CT-complex can be activated to an intermediate (INT) with energy 15.154 kcal mol^-1 higher than that of the CT-complex. The intermediate (INT) then transforms easily (barrier 5.442 kcal mol^-1) into the final, N-type product. The total bromination is slightly exothermic. Accompanying the breaking of Br-Br bond, C1-Br, C5-Br and C2-C6 bonds are formed, and C1 = C2 and C5 = C6 double bonds transform into single bonds. The direction of the reaction is determined by the direction of intramolecular skeletal rearrangement that is realized by the formation of C2-C6 bond.

Computational study of decomposition mechanisms and thermodynamic properties of molecular-type cracking patterns for the highly energetic molecule GZT

This study uses the Gaussian 03 program and density functional theory B3LYP with three basis set methods—[B3LYP/6-311+G(d,p), B3LYP/6-31+G(2d,p), and B3LYP/6-31G(d,p)]—to model the highly energetic ionic compound diguanidinium 5,5′-azotetrazolate (GZT) to research its decomposition mechanisms and thermodynamic properties. Molecular-type cracking patterns are proposed, which were initiated by heterocyclic ring opening, sequential cracking of the two five-membered rings of GZT, and simultaneous release of N₂ molecules; whereas proton transfer, bond-breaking, and atomic rearrangements were performed subsequently. Finally, 15 reaction paths and five transition states were obtained. All possible decomposition species and transition states, including intermediates and products, were identified, and their corresponding enthalpy and Gibbs free energy values were obtained. The results revealed that (1) the maximum activation energy required is 187.8 kJ mol^–1, and the enthalpy change (ΔH) and Gibbs free-energy change (ΔG) of the net reaction are ?525.1 kJ mol^–1 and ?935.6 kJ mol^–1, respectively; (2) GZT can release large amounts of energy, the main contribution being from the disintegration of the 5,5'-azotetrazolate anion (ZT^2?) skeleton (ΔH?=??598.3 kJ mol^–1); and (3) the final products contained major amounts of N₂ gas, but remaining gas molecules such as HCN and NH₃ were obtained, which are in agreement with experimental results. The detailed decomposition simulation results demonstrated the feasibility of this method to calculate the energies of the thermodynamic reactions for the highly energetic GZT and predict the most feasible pathways and the final products.     

Theoretical study of structural patterns in CH<Subscript>2</Subscript>OP<Subscript>2</Subscript> isomers

DFT calculations have been performed on the derivatives of formula CH₂OP₂ to determine their total energy, the relative energy between the isomers and their geometry. Among compounds with a P-C-P linkage, the most stable one is the 2-hydroxy-1,2-diphosphirene II.1, a three-membered heterocycle with a P=C unsaturation. The phosphavinylidene(oxo)phosphorane HP=C=P(O)H IV.5 (which has the same skeleton as the experimentally obtained Mes*P=C=P(O)Mes*) lies 36.30 kcal mol^-1 above it. The least stable compounds are carbenes; the singlet carbenes are more stable than the triplet ones.     

The mechanisms for N-heterocyclic olefin-catalyzed formation of cyclic carbonate from CO<Subscript>2</Subscript> and propargylic alcohols

The mechanistic details of N-heterocyclic olefin-catalyzed formation of cyclic carbonate from CO₂ and propargylic alcohols were investigated by DFT calculations. Six mechanisms, four for the formation of five-membered cyclic carbonate (M-A, M-B, M-B’ and M-C), and two for six-membered cyclic carbonate (M-D and M-E), were fully investigated. The energy profiles in dichloromethane showed that M-B is the predominant reaction with the lowest barrier of 31.99 kcal mol^?1, while M-C and M-D may be kinetically competitive to M-B. The very high activation energy of 45.37 kcal mol^-1, 57.07 kcal mol^-1 and 59.61 kcal mol^?1 for M-A, M-B’ and M-E, respectively, suggest that they are of lesser importance in the overall mechanism.

Open image in new window

Graphical abstract Formations of five-membered ring product and six-membered ring product are kinetically competitive, but five-membered ring product is thermodynamically more preferable.

     

Concentration-Dependent Effects on Intracellular and Surface pH of Exposing <Emphasis Type="Italic">Xenopus</Emphasis> oocytes to Solutions Containing NH<Subscript>3</Subscript>/NH<Subscript>4</Subscript><Superscript>+</Superscript>

Others have shown that exposing oocytes to high levels of (10–20 mM) causes a paradoxical fall in intracellular pH (pH_i), whereas low levels (e.g., 0.5 mM) cause little pH_i change. Here we monitored pH_i and extracellular surface pH (pH_S) while exposing oocytes to 5 or 0.5 mM NH₃/NH₄ ⁺. We confirm that 5 mM causes a paradoxical pH_i fall (−ΔpH_i ≅ 0.2), but also observe an abrupt pH_S fall (−ΔpH_S ≅ 0.2)—indicative of NH₃ influx—followed by a slow decay. Reducing [NH₃/NH₄ ⁺] to 0.5 mM minimizes pH_i changes but maintains pH_S changes at a reduced magnitude. Expressing AmtB (bacterial Rh homologue) exaggerates −ΔpH_S at both levels. During removal of 0.5 or 5 mM NH₃/NH₄ ⁺, failure of pH_S to markedly overshoot bulk extracellular pH implies little NH₃ efflux and, thus, little free cytosolic NH₃/NH₄ ⁺. A new analysis of the effects of NH₃ vs. NH₄ ⁺ fluxes on pH_S and pH_i indicates that (a) NH₃ rather than NH₄ ⁺ fluxes dominate pH_i and pH_S changes and (b) oocytes dispose of most incoming NH₃. NMR studies of oocytes exposed to ¹⁵N-labeled show no significant formation of glutamine but substantial accumulation in what is likely an acid intracellular compartment. In conclusion, parallel measurements of pH_i and pH_S demonstrate that NH₃ flows across the plasma membrane and provide new insights into how a protein molecule in the plasma membrane—AmtB—enhances the flux of a gas across a biological membrane.

Effects of elevated CO<Subscript>2</Subscript> and/or O<Subscript>3</Subscript> on hormone IAA in needles of Chinese pine

This study examined the effects of season-long exposure of Chinese pine (Pinus tabulaeformis) to elevated carbon dioxide (CO₂) and/or ozone (O₃) on indole-3-acetic acid (IAA) content, activities of IAA oxidase (IAAO) and peroxidase (POD) in needles. Trees grown in open-top chambers (OTC) were exposed to control (ambient O₃, 55 nmol mol⁻¹ + ambient CO₂, 350 μmol mol⁻¹, CK), elevated CO₂ (ambient O₃ + high CO₂, 700 μmol mol⁻¹, EC) and elevated O₃ (high O₃, 80 ± 8 nmol mol⁻¹ + ambient CO₂, EO) OTCs from 1 June to 30 September. Plants grown in elevated CO₂ OTC had a growth increase of axial shoot and needle length, compared to control, by 20% and 10% respectively, while the growth in elevated O₃ OTC was 43% and 7% less respectively, than control. An increase in IAA content and POD activity and decrease in IAAO activity were observed in trees exposed to elevated CO₂ concentration compared with control. Elevated O₃ decreased IAA content and had no significant effect on IAAO activity, but significantly increased POD activity. When trees pre-exposed to elevated CO₂ were transferred to elevated O₃ (EC–EO) or trees pre-exposed to elevated O₃ were transferred to elevated CO₂ (EO–EC), IAA content was lower while IAAO activity was higher than that transferred to CK (EC–CK or EO–CK), the change in IAA content was also related to IAAO activity. The results indicated that IAAO and POD activities in Chinese pine needles may be affected by the changes in the atmospheric environment, resulting in the change of IAA metabolism which in turn may cause changes in Chinese pine’s growth. An erratum to this article can be found at     

Determination of shelf life of <Emphasis Type="Italic">Spirulina platensis</Emphasis> (MI<Subscript>2</Subscript>) grown in the Philippines

Gamma linolenic acid (GLA) degradation in Spirulina followed first-order reaction kinetics. At an accelerated temperature range of 45 to 55°C, the degradation rate constants (k _r) of GLA obtained were 4.0 × 10⁻² to 8.8 × 10⁻² day⁻¹. The energy of activation (E _a) was 16.53 kcal mol⁻¹, and the Q₁₀ was 2.22. Based on 20% GLA degradation, the shelf life of sun-dried Spirulina at 30°C is 263 days or 8.6 months using the Arrhenius plot, and 258 days or 8.5 months using the Q ₁₀ approach. Presented at the 6th Meeting of the Asia Pacific Society of Applied Phycology, Manila, Philippines.     

Transient-state biodegradation behavior of a horizontal biotrickling filter in co-treating gaseous H<Subscript>2</Subscript>S and NH<Subscript>3</Subscript>

A horizontal biotrickling filter (HBTF) was used to inoculate autotrophic sulfide-oxidizing and ammonia-oxidizing microbial consortiums over H₂S-exhausted carbon for co-treating H₂S and NH₃ waste gas in a long-term operation. In this study, several aspects (i.e., pH change, shock loading and starvation) of the dynamic behavior of the HBTF were investigated. The metabolic products of N and S bearing species in recycling liquid and biological activities of the biofilm were analyzed to explain the observed phenomena and further explore the fundamentals behind. In the pH range of 4–8.5, although the removal efficiencies of H₂S and NH₃ remained 96–98% and 100%, respectively, the metabolic products demonstrated different removal mechanisms and pathways. NH₄-N and NO₂/NO₃-N were dominated at pH ≤6 and ≥7, respectively, indicating the differentiated contributions from physical/chemical adsorption and bio-oxidation. Moreover, the HBTF demonstrated a good dynamic stability to withstand shock loadings by recovering immediately to the original. During shock loading, only 15.4% and 17.9% of captured H₂S and NH₃ was biodegraded, respectively. After 2, 11, and 48 days of starvation, the HBTF system reached a full performance within reasonable re-startup times (2–80 h), possibly due to the consumption of reduced S and N species in biomass or activated carbon thus converted into SO₄-S and NO₃-N during starvation period. The results helped to understand the fundamental knowledge by revealing the effects of pH and transient loadings linked with individual removal mechanism for H₂S and NH₃ co-treatment in different conditions.