Synthetic hFSH peptide constructs in the evaluation of previous studies on the hFSH receptor interaction

The human follicle-stimulating hormone (hFSH) belongs to a family of glycoprotein hormones which contains two non-identical subunits. This paper describes the design and synthesis of a series of synthetic hFSH constructs as putative ligands for the receptor. The design of these constructs is based on the crystal structure of hCG and molecular modelling using the program package Insight II/Discover. The designed constructs contain peptides ranging from 7 to 48 amino acid residues, disulphide bridges and glycan residues. All the synthetic peptides were synthesized by the stepwise solid-phase method using Fmoc chemistry. Two of the synthetic peptides contain the glycosylated amino acid, Asn(GlcNAc-GlcNAc) and both were prepared using fully protected glycosylated building blocks in the solid-phase peptide synthesis. The disulphide bridges were formed from acetamidomethyl-protected glycopeptides and peptides by a direct deprotection/oxidation method using thallium(III) trifluoroacetate. Mass spectroscopy and amino acid analysis were used for characterization of the synthetic hFSH glycopeptides and peptides. The synthetic hFSH constructs were tested for binding activity on FSH receptor assays but none showed improved binding properties compared with the naturally occurring hormone. It was finally demonstrated that non-related peptides showed non-specific binding at the same level as reported for specific peptides. © 1997 European Peptide Society and John Wiley & Sons, Ltd.     

The primary structure of porcine pancreatic elastase: The N-terminus and disulphide bridges

1. The amino acid composition and N-terminal groups of purified elastase show that it is a single peptide chain of 234 residues. 2. The N-terminal sequence is Val-Val-Gly-Gly-Thr-Glu-. 3. The sequences around the four disulphide bridges were determined by using a ;diagonal' electrophoretic technique. 4. These four bridges are homologous with the four common to bovine trypsin and chymotrypsin. 5. Out of 83 residues of the elastase sequence so far determined, 43 are homologous with similar regions of trypsin and chymotrypsin. 6. The evolutionary ancestry of these enzymes is discussed.     

The amino acid sequence of toxin V II 2, a cytotoxin homologue from banded Egyptian cobra (Naja haje annulifera) venom.

Toxin V II 2 comprises 60 amino acid residues and is cross-linked by four disulphide bridges. The complete amino acid sequence of this toxin was elucidated. The reduced and S-carboxymethylated toxin was digested with trypsin and chymotrypsin and the peptides were purified by ion-exchange chromatography and chromatography or electrophoresis on paper. The Edman procedure, either through the use of the automatic sequenator or by manual manipulation, was employed to obtain the sequence of the intact toxin and the pure peptides. The chymotryptic digest provided the necessary overlapping peptides which allowed the alignment of tryptic peptides. The amino acid sequence of Naja haje annulifera toxin V II 2 shows a high degree of homology with cytotoxin V II 1 of the same venom.     

Disulphide bridges of the heavy chain of human immunoglobulin G2

Amino acid sequences around the disulphide bridges of the heavy chain of an immunoglobulin of the gamma2 subclass have been studied. The protein was digested with pepsin and the digest fractionated by Sephadex. Screening of the eluate by one-dimensional electrophoresis of oxidized and unoxidized samples was used as an assay and pools of fractions were prepared. Identification by diagonal electrophoresis of several inter- and intra-chain disulphide bridges was done on the pooled fractions. The inter-heavy-chain bridged peptide included four cystine residues. Comparison with proteins of other human subclasses indicated that the intrachain bridges identified are the bridges of the invariable section of gamma2 heavy chains. The amino acid sequence of one cysteic acid peptide that may have been derived from the variable part of the molecule was determined. Partial reduction followed by carboxymethylation with radioactive iodoacetate of two proteins of the gamma2 class showed a number of labelled peptides that could be identified as being related to the inter-chain bonded cystine residues.     

The purification and amino acid sequence of toxin CM-13b from Naja haje annulifera (Egyptian cobra) venom.

Toxin CM-13b was purified from the venom of Naja haje annulifera by gel filtration on Sephadex G-50 and by ion-exchange chromatography on CM-cellulose. The toxin comprises 65 amino acid residues and is cross-linked by five disulphide bridges. The complete amino acid sequence of toxin CM-13b was elucidated. The reduced and S-carboxymethylated toxin was digested with trypsin and chymotrypsin and the peptides purified by DEAE-cellulose chromatography and chromatography or electrophoresis on paper. The amino acid sequences of the intact toxin and its constituent peptides were determined by the Edman-Begg procedure, either through the use of the automatic sequenator or by manual manipulation. The chymotryptic digest provided the necessary overlapping peptides for aligning the tryptic peptides. The primary structure of toxin CM-13b shows a high degree of homology with that of protein S4C11 from Naja melanoleuca venom[1], but their toxicities are very different.     

Completion of the amino acid sequence of papain

Papain was inhibited with bromo[2-(14)C]acetic acid, the tertiary structure of the inhibited enzyme was unfolded and the disulphide bridges were reduced with mercaptoethanol and aminoethylated. Digestion with trypsin gave a radioactive peptide consisting of residues 18-58 inclusive and containing therefore the sequence of the thirteen unknown residues 29-41 in the primary sequence of papain. This peptide was digested with pepsin to give a radioactive peptide consisting of residues 18-47, which after digestion with 0.4m-hydrochloric acid gave a radioactive peptide consisting of residues 24-43 inclusive. Further digestion with 6m-hydrochloric acid gave peptides that were used to determine the sequence: Ser-Ala-Val-Val-Thr-Ile-Glx-Gly-Ile-Ile-Lys-Ile-Arg for the residues 29-41, so completing the amino acid sequence of papain.     

Chymotrypsins from the deer (Cervidae) family. Isolation, partial characterization and primary-structure studies of chymotrypsins A and B from both moose (Alces alces) and elk (Cervus elaphus) pancreas.

1. An anionic and a cationic chymotrypsin (EC 3.4.21.1) were isolated from the pancreas glands of the moose (Alces alces) and elk (Cervus elaphus). The A and B chymotrypsins from each species were purified to homogeneity by (NH4)2SO4 fractionation, affinity chromatography on 4-phenylbutylamine-Sepharose and ion-exchange chromatography on DEAE- and CM-cellulose. 2. The molecular weight and pH optimum of each chymotrypsin were similar to those of the corresponding ox A and B chymotrypsins. 3. The substrate specificities of the chymotrypsins were investigated by digestion of glucagon and the oxidized B chain of insulin. The primary specificity of each chymotrypsin for aromatic amino acid residues was further established by determining the Km and kcat for the hydrolysis of a number of synthetic amino acid ester substrates. 4. The amino acid composition and total number of residues of moose and elk chymotrypsin A were similar to those of ox chymotrypsin A. An even greater similarity was observed among the B chymotrypsins of the three species. 5. The A chymotrypsins of moose and elk were fragmented to their constituent 'A', 'B' and 'C' polypeptide chains by succinylation (3-carboxypropionylation), reduction and alkylation of the native enzymes. In each case, the two major chains ('B' and 'C') were separated and isolated. By comparison of the amino acid compositions of moose, elk and oxy 'B' and 'C' chains, a greater difference was observed among the three A chymotrypsins than was suggested by the amino acid compositions of the native enzymes alone. 6. Peptides were isolated from the disulphide bridge and active-site regions of the A and B chymotrypsins of moose and elk by diagonal peptide-'mapping' techniques. From the amino acid compositions of the isolated peptides (assuming maximum homology) and from a comparison of diagonal peptide 'maps', there was established a high degree of primary-structure identity among the mooae, elk and ox chymotrypsins. Tentative sequences were deduced for the peptides isolated by diagonal peptide 'mapping'. 7. Details of the isolation procedures of the moose and elk chymotrypsins A and B and the amino acid analyses of some peptides obtained by diagonal peptide 'mapping' have been deposited as Supplementary Publication SUP 50064 (27 pages) at the British Library Lending Division, Boston Spa, Wetherby, W. Yorkshire LS23 7BQ, U.K., from whom copies can be obtained on the terms indicated in Biochem. J. (1976) 153, 5.     

The covalent structure of collagen. The chymotrypsin, trypsin and hydroxylamine peptides derived from alpha2-CB4 of calf-skin collagen.

The cyanogen-bromide-derived peptide alpha2-CB4 from calf skin collagen, consisting of 321 amino acid residues, has been fragmented in order to obtain peptides suitable for automated sequential analysis. Digestion with chymotrypsin liberated six unique peptides consisting of 12, 17, 19, 54, 63 and 156 amino acid residues. Treatment of alpha2-CB4 with hydroxylamine yielded four peptides with 24, 87, 96 and 114 residues. No unspecific cleavage by hydroxylamine was encountered. All of the trypsin-derived peptides of alpha2-CB4 were isolated and characterized by their amino acid compositions. Most of the peptides isolated were ordered along the peptide chain of alpha2-CB4. Ordering of the peptides was greatly assisted by the isolation of double peptides from the chymotrypsin, trypsin and hydroxylamine-derived peptide mixtures.     

Partial amino acid sequence of porcine elastase II. Active site and the activation peptide regions

The partial amino acid sequence of porcine elastase II, isolated from crude trypsin Type II, was determined. The enzyme consists of two polypeptide chains, a light chain composed of 11 residues, and a heavy chain (Mr = 23 500) with four intrachain disulfide bridges; the two chains are held together by one interchain disulfide bond. Elastase II was fragmented into several peptides by chemical cleavages with CNBr at the two methionine residues, 99 and 180 (chymotrypsinogen numbering), and with hydroxylamine at the peptide bond following DIP-Ser195. About 50% of the sequence was determined and the positions of 120 amino acids were located, including the light chain residues and most of the active site residues. The partial sequence shows 64% difference between porcine elastase II and elastase I and only 26% difference between porcine elastase II and bovine chymotrypsin B.     

Snake venom toxins. The amino-acid sequences of three toxins (CM-8, CM-11 and CM-13a) from Naja haje annulifera (Egyptian cobra) venom.

Three toxins (CM-8, CM-11, and CM-13a) were purified from the venom of Naja haje annulifera by gel filtration on Sephadex G-50 and by ion-exchange chromatography on CM-cellulose. Whereas toxin CM-8 and CM-11 comprise 60 amino acid residues, toxin CM-13a contains 61 residues. All three toxins are cross-linked by four intrachain disulphide bridges. The complete amino acid sequences of these toxins have been elucidated. The reduced and S-carboxymethylated toxins were digested with trypsin and chymotrypsin and the peptides purified by ion-exchange chromatography, gel filtration and chromatography or electrophoresis on paper. The Edman procedure, either through the use of the automatic sequencer or by manual manipulation, was employed to obtain the sequence of the intact toxins and the pure peptides. The chymotryptic digests provided the necessary overlapping peptides which allowed the alignment of the tryptic peptides. The properties of the three toxins were compared with those of the cytotoxin group. The toxicities the serological properties, the sequences and the invariant amino acid residues of toxin CM-8 and CM-11 resemble the corresponding properties of the cytotoxin group. The sequence and serological properties of toxin CM-13a show that it is related to the cytotoxin group, but its toxicity is much lower than those encountered in the cytotoxin group.     

Immunization with a synthetic robustoxin derivative lacking disulphide bridges protects against a potentially lethal challenge with funnel-web spider (<Emphasis Type="Italic">Atrax robustus</Emphasis>) venom

The venom of male Atrax robustus spiders is potentially lethal to primates. These spiders have been responsible for a number of human deaths. Robustoxin is the lethal toxin in the venom. It is a highly cross-linked polypeptide that has 42 amino acid residues and four disulphide bridges. If these bridges are broken, the resulting polypeptide is nontoxic. Robustoxin was chemically synthesized with all of its eight cysteine residues protected with acetamidomethyl groups in order to avoid formation of disulphide bridges. The resulting derivative was co-polymerized with keyhole limpet haemocyanin. Two Macaca fascicularis monkeys were immunized with this conjugate. The monkeys were challenged, under anaesthesia, with a potentially lethal dose of male A. robustus crude venom. Both monkeys showed some minor symptoms of intoxication but recovered fully with no adverse after-effects. Immunization with the same immunogen, in the absence of keyhole limpet haemocyanin, did not protect a third monkey. The N-terminal 23 amino acid peptide derived from the sequence of robustoxin was synthesized and conjugated with ovalbumin. A fourth monkey was immunized with this conjugate. However, it was not protected against challenge. The implications of these results for the preparation of synthetic peptide vaccines are discussed.     

The disulphide bridges of immunoglobulin κ-chains

The arrangement of the disulphide bridges of the major component of the light chains of immunoglobulins (kappa-chains) has been studied in the Bence-Jones proteins. Three disulphide bridges have been found. An interchain bridge at the C-terminus has been shown to occur in the dimers of all the proteins studied and was characterized by symmetrical peptides. In the monomer form, the C-terminal half-cystine of the corresponding peptides was linked to a lone half-cystine residue. A second common disulphide-bridge peptide in which a single amino acid difference could be related to the Inv factors of the individual proteins was found in Bence-Jones proteins and in the kappa-chains of normal and abnormal immunoglobulins. Peptides characteristic of a third disulphide bridge studied in three specimens were found to have differences in some residues, but also striking similarities. A methionine peptide has also been characterized in two specimens as a by-product of the technique employed. It is suggested that a general manner of folding may be a common feature of the heterogeneous population of kappa-chains: one bridge which folds an invariable stretch of the chain, another bridge which folds a stretch that varies from protein to protein, and a bridge at the C-terminus which is the interchain link.     

The disulphide bridges and soluble tryptic peptides of calf rennin

1. Cysteic acid peptides from various digests of calf rennin were purified by diagonal paper electrophoresis. 2. The amino acid sequence of these peptides accounts for 38 amino acids around three unique disulphide bridges in rennin. 3. One bridge connects two acidic regions of the chain, one forms a loop of five residues and the other a loop of six residues. 4. These bridges are homologous with those of hog pepsin. 5. Tryptic peptides from the C-terminus of rennin account for 22 residues, 17 of which are homologous with the C-terminus of pepsin. 6. Altogether, sequences accounting for 94 of the 270 residues in rennin are described and the degree of homology with pepsin approximates to 70%.     

Preparation of fluorescence quenched libraries containing interchain disulphide bonds for studies of protein disulphide isomerases

Protein disulphide isomerase is an enzyme that catalyses disulphide redox reactions in proteins. In this paper, fluorogenic and interchain disulphide bond containing peptide libraries and suitable substrates, useful in the study of protein disulphide isomerase, are described. In order to establish the chemistry required for the generation of a split-synthesis library, two substrates containing an interchain disulphide bond, a fluoroescent probe and a quencher were synthesized. The library consists of a Cys residue flanked by randomized amino acid residues at both sides and the fluoroescent Abz group at the amino terminal. All the 20 natural amino acids except Cys were employed. The library was linked to PEGA‒beads via methionine so that the peptides could be selectively removed from the resin by cleavage with CNBr. A disulphide bridge was formed between the bead‒linked library and a peptide containing the quenching chromophore (Tyr(NO₂)) and Cys(pNpys) activated for reaction with a second thiol. The formation and cleavage of the interchain disulphide bonds in the library were monitored under a fluoroescence microscope. Substrates to investigate the properties of protein disulphide isomerase in solution were also synthesized. © 1998 European Peptide Society and John Wiley & Sons, Ltd.     

Partial amino acid sequence of glycophorin from porcine erythrocyte membranes

Glycophorin from porcine erythrocyte membranes was digested with trypsin and chymotrypsin. Some of the peptides were isolated by conventional techniques. The amino acid sequence was determined for two isolated peptides: a chymotryptic glycopeptide of 19 residues and a tryptic peptide of 36 residues which represented the carboxy terminal of the glycophorin.     

The disulphide bonds of erabutoxin a, a neurotoxic protein of a sea-snake (Laticauda semifasciata) venom

Erabutoxin a was partially hydrolysed with enzymes and sulphuric acid and the resulting peptides were separated from each other by column chromatography and paper electrophoresis. From the results of amino acid analyses of the sulphur-containing peptides and their oxidized components, all four disulphide bridges in the toxin molecule were located. The disulphide bonds were found between half-cystine residues at positions 3 and 24, 17 and 41, 43 and 54, and 55 and 60 from the N-terminus.     

The disulphide bridges of a mouse immunoglobulin G1 protein

[(35)S]Cystine-labelled immunoglobulin MOPC21 (IgG1) was prepared from myeloma cells in tissue culture. Carrier myeloma protein was added and the protein was digested with pepsin. The digest was fractionated on Sephadex G-50 into two fractions, further digested with trypsin and again fractionated on Sephadex. Disulphide-bridge peptides were purified by electrophoresis and chromatography and identified by radioautography. A peptide of 96 residues was isolated, which contains both the heavy-light interchain disulphide bridge and all the inter-heavy-chain disulphide bridges. Other peptides were isolated, accounting for all the intrachain disulphide bridges (which could be placed by homology with proteins of other species), except for the variable section of the light chain. Sequences describing this missing disulphide bridge were obtained from totally reduced and alkylated light chains. Peptides related to the interchain disulphide-bridge peptide were isolated from partially reduced and alkylated myeloma protein and from totally reduced heavy chain. The interchain disulphide-bridge peptide was placed at the C-terminal position of the F(ab')(2) fragment, prepared by digestion of the protein with pepsin at pH4.0. Sequences from the heavy-chain intrachain disulphide bridges of MOPC 21 immunoglobulin are compared with homologous sequences from mouse myeloma proteins of other subclasses and proteins of other species.     

Identification of formaldehyde-induced modifications in proteins: reactions with model peptides

Formaldehyde is a well known cross-linking agent that can inactivate, stabilize, or immobilize proteins. The purpose of this study was to map the chemical modifications occurring on each natural amino acid residue caused by formaldehyde. Therefore, model peptides were treated with excess formaldehyde, and the reaction products were analyzed by liquid chromatography-mass spectrometry. Formaldehyde was shown to react with the amino group of the N-terminal amino acid residue and the side-chains of arginine, cysteine, histidine, and lysine residues. Depending on the peptide sequence, methylol groups, Schiff-bases, and methylene bridges were formed. To study intermolecular cross-linking in more detail, cyanoborohydride or glycine was added to the reaction solution. The use of cyanoborohydride could easily distinguish between peptides containing a Schiff-base or a methylene bridge. Formaldehyde and glycine formed a Schiff-base adduct, which was rapidly attached to primary N-terminal amino groups, arginine and tyrosine residues, and, to a lesser degree, asparagine, glutamine, histidine, and tryptophan residues. Unexpected modifications were found in peptides containing a free N-terminal amino group or an arginine residue. Formaldehyde-glycine adducts reacted with the N terminus by means of two steps: the N terminus formed an imidazolidinone, and then the glycine was attached via a methylene bridge. Two covalent modifications occurred on an arginine-containing peptide: (i) the attachment of one glycine molecule to the arginine residue via two methylene bridges, and (ii) the coupling of two glycine molecules via four methylene bridges. Remarkably, formaldehyde did not generate intermolecular cross-links between two primary amino groups. In conclusion, the use of model peptides enabled us to determine the reactivity of each particular cross-link reaction as a function of the reaction conditions and to identify new reaction products after incubation with formaldehyde.     

Structure-oriented rational design of chymotrypsin inhibitor models

Three peptides modelling a highly potent, 35-residue chymotrypsin inhibitor (Schistocerca gregaria chymotrypsin inhibitor) were designed and synthesized by convergent peptide synthesis. For each model peptide, the inhibitory constant (Ki) on chymotrypsin and the solution structure were determined. In addition, molecular dynamics calculations were performed for all of them. Two models containing approximately half of the parent inhibitor (17 of 35 residues) were designed and subsequently found to have no substantial inhibitory activity (Ki values in the mM range). The third model composed of 24 amino acid residues proved to be an effective (Ki approximately 10(-7)) inhibitor of bovine chymotrypsin. Both the solution structure properties determined by NMR spectroscopy and the dynamic behaviour of the latter model system are comparable to the native inhibitor. In contrast, the structure and dynamics of the first two related model peptides show characteristic differences. We suggest that the conformation and flexibility of the modelled protease inhibitor are crucial for its biological efficiency. Moreover, the structural and dynamic features of the binding loop (28-33) and those of the rest of the molecule appear to be interdependent. Most importantly, these structural characteristics can be rationally modified, at least partially, by peptide design.     

Proteinase inhibitors from desert locust, Schistocerca gregaria: engineering of both P(1) and P(1)' residues converts a potent chymotrypsin inhibitor to a potent trypsin inhibitor.

Two peptides, SGCI and SGTI, that inhibited chymotrypsin and trypsin, respectively, were isolated from the haemolymph of Schistocerca gregaria. Their primary structures were found to be identical with SGP-2 and SGP-1, two of a series of peptides isolated from ovaries of the same species (A. Hamdaoui et al., FEBS Lett. 422 (1998) 74-78). All these peptides are composed of 35-36 amino acid residues and contain three homologous disulfide bridges. The residues imparting specificity to SGCI and SGTI were identified as Leu-30 and Arg-29, respectively. The peptides were synthesised by solid-phase peptide synthesis, and the synthetic ones displayed the same inhibition as the natural forms: SGCI is a strong inhibitor of chymotrypsin (K(i) = 6.2 x 10(-12) M), and SGTI is a rather weak inhibitor of trypsin (K(i) = 2.1 x 10(-7) M). The replacement of P(1) then P(1)' residues of SGCI with trypsin-specific residues increased affinity towards trypsin 3600- and 1100-fold, respectively, thus SGCI was converted to a strong trypsin inhibitor (K(i) = 5.0 x 10(-12) M) that retained some inhibitory affinity towards chymotrypsin (K(i) = 3.5 x 10(-8) M). The documented role of both P(1) and P(1)' highlights the importance of S(1)'P(1)' interactions in enzyme-inhibitor complexes.