Dye to use with virus challenge for testing barrier materials

Can FD&C Blue no. 1 dye photoinactivate bacteriophages phi X174, T7, PRD1, and phi 6 under laboratory lighting conditions? At high levels of light, the dye (500 microM) photoinactivated only phi 6. Thus, this dye can be used at concentrations up to 500 microM with bacteriophages phi X174, T7, and PRD1 to test barrier material integrity.     

Filtration sizes of human immunodeficiency virus type 1 and surrogate viruses used to test barrier materials.

Filters with well-defined holes were used to determine the effective diameters in buffer of human immunodeficiency virus type 1, herpes simplex virus type 1, and four bacteriophages (phi X174, T7, PRD1, and phi 6), which may serve as surrogate viruses for testing barrier materials. Bacteriophages phi 6 and PRD1 most closely model human immunodeficiency virus type 1 in filtration size.     

Filtration sizes of human immunodeficiency virus type 1 and surrogate viruses used to test barrier materials.

Filters with well-defined holes were used to determine the effective diameters in buffer of human immunodeficiency virus type 1, herpes simplex virus type 1, and four bacteriophages (phi X174, T7, PRD1, and phi 6), which may serve as surrogate viruses for testing barrier materials. Bacteriophages phi 6 and PRD1 most closely model human immunodeficiency virus type 1 in filtration size.     

Important factors for testing barrier materials with surrogate viruses.

This study evaluated bacteriophages phi X174, T7, PRD1, and phi 6 as possible surrogates for pathogenic human viruses to challenge barrier materials and demonstrated some important factors for their use. Chemical incompatibility with test material was demonstrated when lipid-enveloped phi 6 was inactivated by an aqueous eluate of vinyl gloves, but 0.5% calf serum protected phi 6 from the eluate. Low concentrations (2%) of calf serum also prevented the exaggerated binding of the bacteriophages to filters. Recovery of viruses from surfaces decreased with increasing time before recovery. Penetration through punctures displayed different types of kinetics. The combined data indicate that (i) some bacteriophages may serve as surrogate viruses, (ii) experimental conditions determine whether a particular virus is appropriate as a challenge, and (iii) phi X174 is an excellent choice as a surrogate virus to test barrier materials. The data further indicate that before barrier materials are challenged with viruses, adequate tests should be performed to ensure that the virus is compatible with the test material and test conditions, so that meaningful data will result.     

Important factors for testing barrier materials with surrogate viruses.

This study evaluated bacteriophages phi X174, T7, PRD1, and phi 6 as possible surrogates for pathogenic human viruses to challenge barrier materials and demonstrated some important factors for their use. Chemical incompatibility with test material was demonstrated when lipid-enveloped phi 6 was inactivated by an aqueous eluate of vinyl gloves, but 0.5% calf serum protected phi 6 from the eluate. Low concentrations (2%) of calf serum also prevented the exaggerated binding of the bacteriophages to filters. Recovery of viruses from surfaces decreased with increasing time before recovery. Penetration through punctures displayed different types of kinetics. The combined data indicate that (i) some bacteriophages may serve as surrogate viruses, (ii) experimental conditions determine whether a particular virus is appropriate as a challenge, and (iii) phi X174 is an excellent choice as a surrogate virus to test barrier materials. The data further indicate that before barrier materials are challenged with viruses, adequate tests should be performed to ensure that the virus is compatible with the test material and test conditions, so that meaningful data will result.     

Studies of the recognition sequence of phi X174 gene A protein. Cleavage site of phi X gene A protein in St-1 RFI DNA.

It is already known that phi X gene A protein converts besides phi X RFI DNA also the RFI DNAs of the single-stranded bacteriophages G4, St-1, alpha 3 and phi K into RFII DNA. We have extended this observations for bacteriophages G14 and U3. Restriction enzyme analysis placed the phi X gene A protein cleavage site in St-1 RF DNA in the HinfI restriction DNA fragment F10 and in the overlapping HaeIII restriction DNA fragment Z7. The exact position and the nucleotide sequence at the 3'-OH end of the nick were determined by DNA sequence analysis of the single-stranded DNA subfragment of the nicked DNA fragment F10 obtained by gelelectrophoresis in denaturing conditions. A stretch of 85 nucleotides of St-1 DNA around the position of the phi X gene A protein cleavage site was established by DNA sequence analysis of the restriction DNA fragment Z7F1. Comparison of this nucleotide sequence with the previously determined nucleotide sequence around the cleavage site of phi X gene A protein in phi X174 RF DNA and G4 RF DNA revealed an identical sequence of only 10 nucleotides. The results suggest that the recognition sequence of the phi X174 gene A protein lies within these 10 nucleotides.     

Comparison of the physical properties and assembly pathways of the related bacteriophages T7, T3 and phi II

To understand constraints on the evolution of bacteriophage assembly, the structures, electrophoretic mobilities (mu) and assembly pathways of the related double-stranded DNA bacteriophages T7, T3 and phi II, have been compared. The characteristics of the following T7, T3 and phi II capsids in these assembly pathways have also been compared: (1) a DNA-free procapsid (capsid I) that packages DNA during assembly; (b) a DNA packaging-associated conversion product of capsid I (capsid II). The molecular weights of the T3 and phi II genomes were 25.2 X 10(6) and 25.9 (+/- 0.2) X 10(6) (26.44 X 10(6) for T7, as previously determined), as determined by agarose gel electrophoresis of intact genomes. The radii of T7, T3 and phi II bacteriophages were indistinguishable by sieving during agarose gel electrophoresis (+/- 4%) and measurement of the bacteriophage hydration (+/- 2%) (30.1 nm for T7, as previously determined). Assuming a T = 7 icosahedral lattice for the arrangement of the major capsid subunits (p10A) of T7, T3 and phi II best explains these data and data previously obtained for T7. At pH 7.4 and an ionic strength of 1.2, the solid-support-free mu values (mu 0 values) of T7, T3 and phi II bacteriophages, obtained by extrapolation of mu during agarose gel electrophoresis to an agarose concentration of 0 and correction for electro-osmosis, were -0.71, -0.91 and -1.17(X 10(-4) cm2V-1 s-1. The mu 0 values of T7, T3 and phi II capsids I were -1.51, -1.58 and -2.07(X 10(-4] cm2V-1 s-1. For the capsids II, these mu 0 values were -0.82, -1.07 and -1.37(X 10(-4] cm2V-1 s-1. The tails of all three bacteriophages were positively charged and the capsid envelopes (heads) were negatively charged. In all cases the procapsid had a negative mu 0 value larger in magnitude than the negative mu 0 value for bacteriophage or capsid II. A trypsin-sensitive region in capsid I-associated, but not capsid II-associated, T3 p10A was observed (previously observed for T7). The largest fragment of trypsinized capsid I-associated p10A had the same molecular weight in T7 and T3, although the T3 p10A is 18% more massive than the T7 p10A. It is suggested that the trypsin-resistant region of capsid I-associated p10A determines the radius of the bacteriophage capsid.     

Functional relationship between the J proteins of bacteriophages phi X174 and G4 during phage morphogenesis.

The functions of the small DNA-binding protein, gpJ, of bacteriophages phi X174 and G4 were examined by in vivo cross-complementation and sucrose gradient sedimentation. The morphogenetic roles of the two proteins may differ. The phi X174 J protein may be required for the formation or stabilization of the phi X174 prohead.     

Enumeration and isolation of viral particles from oligotrophic marine environments by tangential flow filtration.

A method for concentrating, enumerating and isolating viral particles from marine water samples was developed and evaluated. The method consists of a concentration step by a tangential flow filtration (TFF) system, ultrafiltration by centrifugal concentrator, and visualization by transmission electron microscopy (TEM). This procedure allows to reduce volumes of ca. 21 of seawater to 10-20 microliters, which can be dispensed on electron microscopy grids to count total viral particles. This method allows the recovery of small numbers of viral particles from oligotrophic seawater samples, in which viral numbers ranged from 10(5) to 10(6) viral particles/ml. The tangential flow filtration system was evaluated as quantitative technique using suspensions of two different bacteriophages (T6 and phi X174) in autoclaved seawater. Recovery rates varied depending on both the viral morphology and flow rate; recovery percentages reached 117.4% for T6 and 60.6% for phi X174 using low flow rate.     

Minimized virus binding for tests of barrier materials.

Viruses are used to test the barrier properties of materials. Binding of virus particles during passage through holes in the material may yield misleading test results. The choices of challenge virus and suspending medium may be important for minimizing confounding effects that might arise from such binding. In this study, different surrogate viruses, as well as different support media, were evaluated to determine optimal test parameters. Two membranes with high-binding properties (nitrocellulose and cationic polysulfone) were used as filters to compare binding activities of different surrogate challenge viruses (MS2, phi X174, T7, PRD1, and phi 6) in different media. The media consisted of buffered saline with surfactants, serum, or culture broth as additives. In addition, elution rates of viruses that bound to the membranes were determined. The results suggest that viruses can bind by hydrophobic and electrostatic interactions, with phi X174 displaying the lowest level of binding by either process. The nonionic detergents Triton X-100 and Tween 80 (0.1%) equally minimized hydrophobic interactions. Neither anionic nor cationic surfactants were as effective at nontoxic levels. Serum was effective at reducing both hydrophobic and electrostatic binding, with 2% being sufficient for eliminating binding under our test conditions. Thus, phi X174 remains the best choice as a surrogate virus to test barrier materials, and Triton X-100 (0.1%) remains a good choice for reducing hydrophobic binding. In addition, binding of viruses by barrier materials is unlikely to prevent passage of blood-borne pathogens.     

Differential survival and chloramphenicol-insensitive error-prone repair of hydroxylamine-inactivated phi X174 bacteriophage mutants

Features of inactivation, repair and concomitant mutagenesis of hydroxylamine-treated phi X174 bacteriophages are reported here. (1) For reasons unknown, the nonsense phage mutants tested here were far more sensitive to hydroxylamine than the wild-type phage. In contrast, the sensitivities of these same phi X174 mutants to UV-irradiation are indistinguishable. (2) Hydroxylamine-treated amber phages mutated to ochre but not to wild-type particles, i.e., G leads to A transition events were recovered. (3) The repair of phi X174 phages from hydroxylamine-induced damage was error-prone, but unlike UV damage, did not require protein synthesis de novo. Possible mechanisms of these novel features are discussed.     

Delineating the Specific Influence of Virus Isoelectric Point and Size on Virus Adsorption and Transport through Sandy Soils

Many of the factors controlling viral transport and survival within the subsurface are still poorly understood. In order to identify the precise influence of viral isoelectric point on viral adsorption onto aquifer sediment material, we employed five different spherical bacteriophages (MS2, PRD1, Qβ, X174, and PM2) having differing isoelectric points (pI 3.9, 4.2, 5.3, 6.6, and 7.3 respectively) in laboratory viral transport studies. We employed conventional batch flowthrough columns, as well as a novel continuously recirculating column, in these studies. In a 0.78-m batch flowthrough column, the smaller phages (MS2, X174, and Qβ), which had similar diameters, exhibited maximum effluent concentration/initial concentration values that correlated exactly with their isoelectric points. In the continuously recirculating column, viral adsorption was negatively correlated with the isoelectric points of the viruses. A model of virus migration in the soil columns was created by using a one-dimensional transport model in which kinetic sorption was used. The data suggest that the isoelectric point of a virus is the predetermining factor controlling viral adsorption within aquifers. The data also suggest that when virus particles are more than 60 nm in diameter, viral dimensions become the overriding factor.     

Differential bacteriophage mortality on exposure to copper

Many studies report that copper can be used to control microbial growth, including that of viruses. We determined the rates of copper-mediated inactivation for a wide range of bacteriophages. We used two methods to test the effect of copper on bacteriophage survival. One method involved placing small volumes of bacteriophage lysate on copper and stainless steel coupons. Following exposure, metal coupons were rinsed with lysogeny broth, and the resulting fluid was serially diluted and plated on agar with the corresponding bacterial host. The second method involved adding copper sulfate (CuSO(4)) to bacteriophage lysates to a final concentration of 5 mM. Aliquots were removed from the mixture, serially diluted, and plated with the appropriate bacterial host. Significant mortality was observed among the double-stranded RNA (dsRNA) bacteriophages Φ6 and Φ8, the single-stranded RNA (ssRNA) bacteriophage PP7, the ssDNA bacteriophage ΦX174, and the dsDNA bacteriophage PM2. However, the dsDNA bacteriophages PRD1, T4, and λ were relatively unaffected by copper. Interestingly, lipid-containing bacteriophages were most susceptible to copper toxicity. In addition, in the first experimental method, the pattern of bacteriophage Φ6 survival over time showed a plateau in mortality after lysates dried out. This finding suggests that copper's effect on bacteriophage is mediated by the presence of water.     

Nucleotide sequences at the phi X gene A protein cleavage site in replicative form I DNAs of bacteriophages U3, G14, and alpha 3

Gene A protein, a bacteriophage phi X174-encoded endonuclease involved in phi X replicative form (RF) DNA replication, nicks not only phi X RFI DNA but also RFI DNAs of several other spherical single-stranded DNA bacteriophages. The position of the phi X gene A protein nick and the nucleotide sequence surrounding this site in RF DNAs of the bacteriophages U3, G14, and alpha 3 were determined. Comparison of the nucleotide sequences which surround the nick site of the gene A protein in RF DNAs of phi X174, G4, St-1, U3, G14, and alpha 3 revealed that a strongly conserved 30-nucleotide stretch occurred in RF DNAs of all six phages. However, perfect DNA sequence homology around this site was only 10 nucleotides, the decamer sequence CAACTTGATA. The present results support the hypothesis that, for nicking of double-stranded supercoiled DNA by the phi X gene A protein, the presence of the recognition sequence CAACTTGATA and a specific gene A protein binding sequence upstream from the recognition sequence are required. The sequence data obtained so far from phages U3, G14, St-1, and alpha 3 have been compared with the nucleotide sequences and amino acid sequences of both phi X and G4. According to this comparison, the evolutionary relationship between phages G4, U3, and G14 is very close, which also holds for phages alpha 3 and St-1. However, the two groups are only distantly related, both to each other and to phi X.     

Virus Passage through Track-Etch Membranes Modified by Salinity and a Nonionic Surfactant

Why do viruses sometimes not pass through larger pores in track-etch filters? Increasing the salinity (0.8 to 160 mM Na⁺) decreased X174 and PRD1 passage through track-etch polycarbonate membranes (sodium dodecyl sulfate coated but not polyvinylpyrrolidone coated) and PRD1 passage through polyester membranes. Undiminished passage when 0.1% Tween 80 was added implied that nonionic virus adsorption occurred and indicated that high levels of salinity decreased virus passage by decreasing electrostatic repulsion that prevented adsorption.     

Modeling Virus Adsorption in Batch and Column Experiments

Experiments with batch suspensions, recirculating columns and flow-through columns have been carried out involving a sandy soil and five bacteriophages: MS2, PRD1, X174, Q and PM2. In batch and recirculating column experiments, attachment and detachment rate coefficients were determined by fitting a two-parameter (attachment and detachment) model. In general, attachment and detachment rate coefficients were not found to be significantly different between the two kinds of experiments. There was one exception, however: MS2 appeared to detach faster in the presence of strong advective flow. In the case of flow-through column experiments, it is shown that a two-site model, with adsorption to equilibrium and kinetic sites, fits the breakthrough curves of all the phages, except PM2, satisfactorily. A one-site kinetic model was found to be appropriate for phage PM2. A small proportion of bacteriophages MS2, PRD1, and Q adsorbed to equilibrium sites, whereas a large proportion of X174 adsorbed to equilibrium sites. Such a distinction between adsorption to equilibrium and kinetic sites cannot be made in the case of batch or recirculating column experiments. Kinetic attachment rate coefficients were found to be significantly higher for the bacteriophages with presumably stronger negative charge. This may be ascribed to the presence of multivalent cations. Under these conditions, bacteriophage X174 appears to behave more conservatively than more negatively charged viruses, and may then be a better choice as a relatively conservative tracer for virus transport through the subsurface.     

FseI, a new type II restriction endonuclease that recognizes the octanucleotide sequence 5'' GGCCGGCC 3''.

A Type II restriction endonuclease, designated FseI, has been partially purified from a Frankia species (NRRL 18528). This enzyme cleaves Adenovirus 2 DNA at three sites, but does not cleave the DNAs from bacteriophages lambda, T7, and phi X174, the animal virus SV40, pUC18 and pBR322. FseI recognizes the octanucleotide sequence 5' GGCCGG decreases CC 3' and cleaves as indicated by the arrow. The frequency of occurrence of FseI sites within sequenced regions of the human genome is similar to that for NotI sites.     

The complete 30-base-pair origin region of bacteriophage phi X174 in a plasmid is both required and sufficient for in vivo rolling-circle DNA replication and packaging

The origin of replication of the isometric single-stranded DNA bacteriophages is located in a specific sequence of 30 nucleotides, the origin region, which is highly conserved in these phage genomes. Plasmids harboring this origin region are subject to rolling-circle DNA replication and packaging of single-stranded (ss) plasmid DNA into phage coats in phi X174 or G4-phage-infected cells. This system was used to study the nucleotide sequence requirements for rolling-circle DNA replication and DNA packaging employing plasmids which contain the first 24, 25, 26, 27, 28 and the complete 30-base-pair (bp) origin region of phi X174. No difference in plasmid ss DNA packaging was observed for plasmids carrying only the 30-bp origin region and plasmids carrying the 30-bp origin region plus surrounding sequences (i.e. plasmids carrying the HaeIII restriction fragment Z6B of phi X174 replicative-form DNA). This indicates that all signals for DNA replication and phage morphogenesis are contained in the 30-bp origin region and that no contribution is made by sequences which immediately surround the origin region in the phi X174 genome. The efficiency of packaging of plasmid ssDNA for plasmids containing deletions in the right part of the origin region decreases drastically when compared with the plasmid containing the complete 30-bp origin region (for a plasmid carrying the first 28 bp of the origin region to approximately 5% and 0.5% in the phi X174 and G4 systems respectively). Previous studies [Fluit, A.C., Baas, P.D., van Boom, J.H., Veeneman, G.H. and Jansz, H.S. (1984) Nucleic Acids Res. 12, 6443--6454] have shown that the presence of the first 27 bp of the origin region is necessary as well as sufficient for cleavage of the viral strand in the origin region by phi X174 gene A protein. Moreover, Brown et al. [Brown, D.R., Schmidt-Glenewinkel, T., Reinberg, D. and Hurwitz, J. (1983) J. Biol. Chem. 258, 8402--8412] have shown that omission of the last 2 bp of the origin region does not interfere with phi X174 rolling-circle DNA replication in vitro. Our results therefore suggest that for optimal phage development in vivo, signals in the origin region are utilized which have not yet been noticed by the in vitro systems for phi X174 phage DNA replication and morphogenesis.     

DNA sequences which support activities of the bacteriophage phi X174 gene A protein

The DNA sequence of 30 nucleotides which surrounds the origin of viral strand DNA replication is highly conserved amongst the icosahedral single-stranded DNA bacteriophages. The A gene of these phages encodes a protein which is required for initiation and termination of viral strand DNA synthesis and acts as a nicking-closing activity specifically within this 30-nucleotide sequence. A system of purified Escherichia coli host proteins and phi X174 gene A protein has been developed which specifically replicates in vitro the viral strand of phi X174 from RF (replicative form) I template DNA and yields single-stranded circular DNA products (RF leads to SS(c) DNA replication system). Recombinant plasmids carrying inserts derived from phage phi X174 or G4 DNA which range in length from 49 to 1175 base pairs and contain the 30-nucleotide conserved sequence have been shown to support phi X A protein-dependent DNA synthesis in vitro in this replication system. We report here that insertion of the 30-nucleotide sequence alone into pBR322 allows the resulting recombinant plasmids to support phi X A protein-dependent in vitro DNA synthesis as efficiently as phi X174 template DNA in the RF leads to SS(c) replication system. The 30-nucleotide sequence functions as a fully wild type DNA replication origin as determined by the rate of DNA synthesis and the structure of resulting DNA products. Furthermore, the DNA sequence requirements for nicking of RF I DNA by the phi X A protein and for supporting replication origin function have been partially separated. Homology to positions 1, 29, and 30 of the 30-nucleotide conserved sequence are not required for cleavage of RF I DNA by the A protein; homology to position 1 but not 29 or 30 is required for efficient DNA replication.