Molecular clocks reduce plasmid loss rates: the R1 case

Plasmids control their replication so that the replication frequency per plasmid copy responds to the number of plasmid copies per cell. High sensitivity amplification in replication response to copy number deviations generally reduces variation in copy numbers between different single cells, thereby reducing the plasmid loss rate in a cell population. However, experiments show that plasmid R1 has a gradual, insensitive replication control predicting considerable copy number variation between single cells. The critical step in R1 copy number control is regulation of synthesis of a rate-limiting cis-acting replication protein, RepA. De novo synthesis of a large number of RepA molecules is required for replication, suggesting that copy number control is exercised at multiple steps. In this theoretical kinetic study we analyse R1 multistep copy number control and show that it results in the insensitive replication response found experimentally but that it at the same time effectively prohibits the existence of only one plasmid copy in a dividing cell. In combination with the partition system of R1, this can lead to very high segregational stability. The R1 control mechanism is compared to the different multistep copy number control of plasmid ColE1 that is based on conventional sensitivity amplification. This implies that while copy number control for ColE1 efficiently corrects for fluctuations that have already occurred, R1 copy number control prevents their emergence in cells that by chance start their cycle with only one plasmid copy. We also discuss how regular, clock-like, behaviour of single plasmid copies becomes hidden in experiments probing collective properties of a population of plasmid copies because the individual copies are out of phase. The model is formulated using master equations, taking a stochastic approach to regulation, but the mathematical formalism is kept to a minimum and the model is simplified to its bare essence. This simplicity makes it possible to extend the analysis to other replicons with similar design principles.     

Cryptic plasmids of Mycobacterium avium: Tn552 to the rescue

Plasmids have been described in almost all bacterial species analysed and have proven to be essential genetic tools. In many bacteria these extrachromosomal DNAs are cryptic with no known markers or function, which makes their characterization and genetic exploitation extremely difficult. Here we describe a system that will allow the rescue of any circular DNA (plasmid or phage) using an in vitro transposition system to deliver both a selectable marker (kanamycin) and an Escherichia coli plasmid origin of replication. In this study, we demonstrate the rescue of four cryptic plasmids from the opportunistic pathogen Mycobacterium avium. To evaluate the host range of the rescued plasmids, we have examined their ability to be propagated in Mycobacterium smegmatis and Mycobacterium bovis BCG, and their compatibility with other mycobacterial plasmids. In addition, we use a library of transposon insertions to sequence one plasmid, pVT2, and to begin a genetic analysis of plasmid genes. Using this approach, we identified a putative conjugative relaxase, suggesting this myco-bacterial plasmid is transferable, and three genes required for plasmid establishment and replication.     

P1 plasmid replication requires methylated DNA.

Plasmids driven by the plasmid replication origin of bacteriophage P1 cannot be established in Escherichia coli strains that are defective for the DNA adenine methylase (dam). Using a composite plasmid that has two origins, we show that the P1 origin cannot function even in a plasmid that is already established in a dam strain. An in vitro replication system for the P1 origin was developed that uses as a substrate M13 replicative-form DNA containing the minimal P1 origin. The reaction mixture contains a crude extract of E. coli and purified P1 RepA protein. In addition to being RepA dependent, synthesis was shown to be dependent on methylation of the dam methylase-sensitive sites of the substrate DNA. As the P1 origin contains five such sites in a small region known to be critical for origin function, it can be concluded that methylation of these sites is a requirement for initiation. This suggests that the postreplicational methylation of the origin may control reinitiation and contribute to the accuracy of the highly stringent copy-number control of the origin in vivo.     

Distribution of basic replicons having homology with RepFIA, RepFIB, and RepFIC among IncF group plasmids

Plasmids encoding F-like pili have been divided into groups on the basis of their incompatibility behavior. Three basic replicons have been recognized previously in the IncFI plasmid group and we have now examined their distribution in representative plasmids from 22 of the currently recognized incompatibility groups. The occurrence of these basic replicons was found to be rare outside of the IncF group, and significant hybridization was shown only for RepFIA to IncH1 and I group plasmids. Homology to the RepFIC basic replicon was found in all but one of the IncF group plasmids examined but RepFIA and RepFIB have a more restricted distribution. It appears likely that some plasmids carry vestiges of replicons which still express incompatibility but are incapable of replication. We suggest that evolutionary divergence among the plasmids of the IncF group has resulted from various genetic rearrangements among these basic replicons.     

Clustering versus random segregation of plasmids lacking a partitioning function: a plasmid paradox?

Plasmids lacking a functional partition system are randomly distributed to the daughter cells; plasmid-free daughter cells are formed with a frequency of (1/2)2n per cell and cell generation where 2n is the (average) copy number at cell division. Hence, the unit of segregation is one plasmid copy. However, plasmids form clusters in the cells. A putative solution to this potential paradox is presented: one plasmid copy at a time is recruited from the plasmid clusters to the replication factories that are located in the cell centres. Hence, replication offers the means of declustering that is necessary in a growing host population. The daughter copies diffuse freely and each copy may with equal probability end up in either of the two cell halves. In this way, the random segregation of the plasmids is coupled to replication and occurs continuously during the cell cycle, and is not linked to cell division. The unit of segregation is the plasmid copy and not the plasmid clusters. In contrast, the two daughters of a Par+ plasmid are directed in opposite directions by the plasmid-encoded partition system, thereby assuring that each daughter cell receives the plasmid.     

Probing the activation of the replicative origin of broad host-range plasmid R1162 with Tus, the E.coli anti-helicase protein.

The E.coli Tus protein is an anti-helicase involved in the termination of chromosome replication. The binding site for this protein, ter, was cloned into derivatives of the broad host-range plasmid R1162. The ter site caused the orientation-specific termination of plasmid replication fork movement in cell extracts containing Tus. Plasmids were constructed so that two sites for initiation of R1162 replication flanked the iteron-containing domain of the origin. In these plasmids, the site next to the AT-rich region within the iteron-containing domain was more active. In addition, when ter was placed between the more active site and the iterons, initiation of replication from this site was specifically inhibited. The data support a model for entry of the essential, plasmid-encoded helicase at one side of the direct repeats, and for its movement primarily in one direction away from these repeats to activate the initiation sites for DNA replication.     

Plasmid transfer to Bordetella pertussis: conjugation and transformation

Plasmids of the P and W incompatibility groups were introduced into Bordetella pertussis by conjugation. Plasmid DNA isolated from B. pertussis could be reintroduced by transformation. DNA isolated from Escherichia coli could not be introduced into B. pertussis by transformation if this DNA contained HindIII restriction sites. We have demonstrated that HindIII sites are modified by B. pertussis. Plasmids of the FI and FII incompatibility groups could not be introduced into B. pertussis by conjugation, and nonconjugative plasmids of the ColE1 and Q incompatibility groups could not be introduced by transformation. Our ability to introduce plasmids in the laboratory suggests that the apparent lack of plasmids in natural isolates of B. pertussis is not due to an inability to act as a plasmid recipient.     

Stress responses and replication of plasmids in bacterial cells

Plasmids, DNA (or rarely RNA) molecules which replicate in cells autonomously (independently of chromosomes) as non-essential genetic elements, play important roles for microbes grown under specific environmental conditions as well as in scientific laboratories and in biotechnology. For example, bacterial plasmids are excellent models in studies on regulation of DNA replication, and their derivatives are the most commonly used vectors in genetic engineering. Detailed mechanisms of replication initiation, which is the crucial process for efficient maintenance of plasmids in cells, have been elucidated for several plasmids. However, to understand plasmid biology, it is necessary to understand regulation of plasmid DNA replication in response to different environmental conditions in which host cells exist. Knowledge of such regulatory processes is also very important for those who use plasmids as expression vectors to produce large amounts of recombinant proteins. Variable conditions in large-scale fermentations must influence replication of plasmid DNA in cells, thus affecting the efficiency of recombinant gene expression significantly. Contrary to extensively investigated biochemistry of plasmid replication, molecular mechanisms of regulation of plasmid DNA replication in response to various environmental stress conditions are relatively poorly understood. There are, however, recently published studies that add significant data to our knowledge on relations between cellular stress responses and control of plasmid DNA replication. In this review we focus on plasmids derived from bacteriophage lambda that are among the best investigated replicons. Nevertheless, recent results of studies on other plasmids are also discussed shortly.     

Copy number control by a yeast centromere

Plasmids containing a cloned yeast (Saccharomyces cerevisiae) centromere (CEN3) in combination with a suitable DNA replication system are maintained in yeast at the low copy number typical of a chromosome. In composite plasmids containing CEN3 plus the yeast 2 mu plasmid, the CEN3 copy number control is dominant over the amplification system that normally drives the 2 mu plasmids to high copy number. The CEN3-2 mu composite plasmids are relatively stably maintained in yeast at a copy number of about one per haploid genome, and segregate through meiosis in a typical Mendelian pattern. Some of the CEN3-2 mu composite plasmids isolated from yeast contain deletions of variable size that remove the functional centromere, resulting in loss of the CEN3 control and reversion to high copy number. Formation of the CEN3 deletions requires the specialized recombination system (inverted repeat sequences and FLP gene) of the yeast 2 mu plasmid.     

Comparative analysis of the replication regions of IncB, IncK, and IncZ plasmids.

Minireplicons from the I-complex plasmids R387 (IncK) and pIE545 (IncZ) were constructed, and the nucleotide sequences of their replication regions were compared with that of the B plasmid, pMU720. The coding sequence of the putative replication protein, RepA, of each plasmid was located. RepA of K and B plasmids were homologous, whereas RepA of Z resembled RepA1 of FII plasmid. Sequences upstream of RepA were conserved in the three I-complex plasmids. Group B and Z plasmids were incompatible.     

Rep*: a Viral Element That Can Partially Replace the Origin of Plasmid DNA Synthesis of Epstein-Barr Virus

Replication of the Epstein-Barr viral (EBV) genome occurs once per cell cycle during latent infection. Similarly, plasmids containing EBV’s plasmid origin of replication, oriP, are replicated once per cell cycle. Replication from oriP requires EBV nuclear antigen 1 (EBNA-1) in trans; however, its contributions to this replication are unknown. oriP contains 24 EBNA-1 binding sites; 20 are located within the family of repeats, and 4 are found within the dyad symmetry element. The site of initiation of DNA replication within oriP is at or near the dyad symmetry element. We have identified a plasmid that contains the family of repeats but lacks the dyad symmetry element whose replication can be detected for a limited number of cell cycles. The detection of short-term replication of this plasmid requires EBNA-1 and can be inhibited by a dominant-negative inhibitor of EBNA-1. We have identified two regions within this plasmid which can independently contribute to this replication in the absence of the dyad symmetry element of oriP. One region contains native EBV sequences within the BamHI C fragment of the B95-8 genome of EBV; the other contains sequences within the simian virus 40 genome. We have mapped the region contributing to replication within the EBV sequences to a 298-bp fragment, Rep*. Plasmids which contain three copies of Rep* plus the family of repeats support replication more efficiently than those with one copy, consistent with a stochastic model for the initiation of DNA synthesis. Plasmids with three copies of Rep* also support long-term replication in the presence of EBNA-1. These observations together indicate that the latent origin of replication of EBV is more complex than formerly appreciated; it is a multicomponent origin of which the dyad symmetry element is one efficient component. The experimental approach described here could be used to identify eukaryotic sequences which mediate DNA synthesis, albeit inefficiently.     

Plasmids isolated from marine sediment microbial communities contain replication and incompatibility regions unrelated to those of known plasmid groups.

Two hundred ninety-seven bacteria carrying plasmids that range in size from 5 to 250 kb were identified from more than 1,000 aerobic heterotrophic bacteria isolated from coastal California marine sediments. While some isolates contained numerous (three to five) small (5- to 10-kb) plasmids, the majority of the natural isolates typically contained one large (40- to 100-kb) plasmid. By the method of plasmid isolation used in this study, the frequency of plasmid incidence ranged from 24 to 28% depending on the samples examined. Diversity of the plasmids occurring in the marine sediment bacterial populations was examined at the molecular level by hybridization with 14 different DNA probes specific for the incompatibility and replication (inc/rep) regions of a number of well-characterized plasmid incompatibility groups (repB/O, FIA, FII, FIB, HI1, HI2, I1, L/M, X, N, P, Q, W, and U). Interestingly, we found no DNA homology between the plasmids isolated from the culturable bacterial population of marine sediments and the replicon probes specific for numerous incompatibility groups developed by Couturier et al. (M. F. Couturier, F. Bex, P. L. Bergquist, and W. K. Maas, Microbiol. Rev. 52:375-395, 1988). Our findings suggest that plasmids in marine sediment microbial communities contain novel, as-yet-uncharacterized, incompatibility and replication regions and that the present replicon typing system, based primarily on plasmids derived from clinical isolates, may not be representative of the plasmid diversity occurring in some marine environments. Since the vast majority of marine bacteria are not culturable under laboratory conditions, we also screened microbial community DNA for the presence of broad- and narrow-host-range plasmid replication sequences. Although the replication origin of the conjugally promiscuous broad-host-range plasmid RK2 (incP) was not detectable in any of the plasmid-containing culturable marine isolates, DNA extracted from the microbial community and amplified by PCR yielded a positive signal for RK2 oriV replication sequences. The strength of the signal suggests the presence of a low level of the incP replicon within the marine microbial community. In contrast, replication sequences specific for the narrow-host-range plasmid F were not detectable in DNA extracted from marine sediment microbial communities. With the possible exception of mercuric chloride, phenotypic analysis of the 297 plasmid-bearing isolates did not demonstrate a correlation between plasmid content and antibiotic or heavy metal resistance traits.     

Comparative genetic organization of incompatibility group P degradative plasmids.

Plasmids that encode genes for the degradation of recalcitrant compounds are often examined only for characteristics of the degradative pathways and ignore regions that are necessary for plasmid replication, incompatibility, and conjugation. If these characteristics were known, then the mobility of the catabolic genes between species could be predicted and different catabolic pathways might be combined to alter substrate range. Two catabolic plasmids, pSS50 and pSS60, isolated from chlorobiphenyl-degrading strains and a 3-chlorobenzoate-degrading plasmid, pBR60, were compared with the previously described IncP group (Pseudomonas group P-1) plasmids pJP4 and R751. All three of the former plasmids were also members of the IncP group, although pBR60 is apparently more distantly related. DNA probes specific for known genetic loci were used to determine the order of homologous loci on the plasmids. In all of these plasmids the order is invariant, demonstrating the conservation of this "backbone" region. In addition, all five plasmids display at least some homology with the mercury resistance transposon, Tn501, which has been suggested to be characteristic of the beta subgroup of the IncP plasmids. Plasmids pSS50 and pSS60 have been mapped in detail, and repeat sequences that surround the suspected degradation genes are described.     

Yeast DNA replication in vitro: initiation and elongation events mimic in vivo processes

An enzyme system prepared from Saccharomyces cerevisiae carries out the replication of exogenous yeast plasmid DNA. Replication in vitro mimics that in vivo in that DNA synthesis in extracts of strain cdc8, a temperature-sensitive DNA replication mutant, is thermolabile relative to the wild-type, and in that aphidicolin inhibits replication in vitro. Furthermore, only plasmids containing a functional yeast replicator, ARS, initiate replication at a specific site in vitro. Analysis of replicative intermediates shows that plasmid YRp7, which contains the chromosomal replicator ARS1, initiates bidirectional replication in a 100 bp region within the sequence required for autonomous replication in vivo. Plasmids containing ARS2, another chromosomal replicator, and the ARS region of the endogenous yeast plasmid 2 microns circle give similar results, suggesting that ARS sequences are specific origins of chromosomal replication. Used in conjunction with deletion mapping, the in vitro system allows definition of the minimal sequences required for the initiation of replication.     

Plasmid replication functions: two distinct segments of plasmid R1, RepA and RepD, express incompatibility and are capable of autonomous replication.

The genetic determinants for replication and incompatibility of plasmid R1 were investigated by gene cloning methods, and three types of R1 miniplasmid derivatives were generated. The first, exemplified by plasmid pKT300, consisted of a single BglII endonuclease-generated deoxyribonucleic acid fragment derived from the R1 region that is located between the determinants for conjugal transfer and antibiotic resistance. Two types of miniplasmids could be formed from PstI endonuclease-generated fragments of pKT300. One of these, which is equivalent to miniplasmids previously generated from plasmids R1-19 and R1-19B2, consisted of two adjacent PstI fragments that encode the RepA replication system of plasmid R1. The other type contained a segment of R1, designated the RepD replication region, that is adjacent to the RepA region and that has not been identified previously as having the capacity for autonomous replication. Plasmid R1, therefore, contained two distinct deoxyribonucleic acid segments capable of autonomous replication. The RepA-RepD miniplasmid pKT300 had a copy number about eightfold higher than that of R1 and hence lacked a determinant for the regulation of plasmid copy number. Like R1, it was maintained stably in dividing bacteria. RepA miniplasmids had copy numbers which were two- to fourfold higher than that of R1 (i.e., which were lower than that of pKT300) and were maintained slightly less stably than those of pKT300 and R1. The RepD miniplasmid was not maintained stably in dividing bacteria. Previous experiments have shown that incompatibility of IncFII group plasmids is specified by a plasmid copy control gene. Despite the fact that RepA miniplasmids of R1 were defective in copy control, they nevertheless expressed incompatibility. This suggests that two genes are responsible for plasmid copy control, one that specifies incompatibility and is located on RepA miniplasmids and another that is located outside of, but adjacent to, the RepA replication region. Hybrid plasmids composed of pBR322 and one PstI fragment from the RepA region, P-8, exhibited incompatibility towards R2 and RepA miniplasmids but not the RepD miniplasmid, whereas hybrids composed of pBR322 and the PstI fragment of the RepD region, P-3, exhibited incompatibility towards R1 and the RepD miniplasmid but not RepA miniplasmids. These results indicate that the two replication systems are functionally distinct and that, although the RepA system is the principal replication system of R1, the RepD system also plays a role in the maintenance of this plasmid.     

Multiple Origins and Replication Proteins Influence Biological Properties of β-Lactamase-Producing Plasmids from Neisseria gonorrhoeae

The beta-lactamase-producing Asia-type plasmid pJD4 of Neisseria gonorrhoeae is a 7.4-kb, broad-host-range plasmid. It is part of a family of plasmids which are structurally related yet vary in size, found in both N. gonorrhoeae and Haemophilus ducreyi. Branch-point analysis by electron microscopy indicates that pJD4 carries three clustered but distinguishable origins of replication, which we named ori1, ori2, and ori3. Although pJD4 belongs to incompatibility (Inc) group W, it also carries a silent IncFII determinant which is expressed when ori2 and ori3 are absent. The Africa-type plasmid pJD5, a naturally occurring deletion derivative of pJD4, carries only ori1, belongs to the IncFII group, and, in contrast to pJD4, requires DNA polymerase I (Pol I) for replication. Plasmids constructed from pJD4 which lack ori1 but carry ori2 and ori3 do not require Pol I and are incompatible with IncW plasmids, suggesting that the ori2 or ori3 region contains the IncW determinant. We have cloned a replication initiation protein (RepB) that is necessary for ori2 and ori3 to function. This Rep protein is distinct from RepA, which is necessary for ori1. Thus, pJD4 is unique because it is the smallest plasmid characterized containing three origins of replication and two unique Rep proteins.     

Sequence analysis and characterization of plasmids from Streptococcus thermophilus

The nucleotide sequences of eight plasmids isolated from seven Streptococcus thermophilus strains have been determined. Plasmids pSt04, pER1-1, and pJ34 are related and replicate via a rolling circle mechanism. Plasmid pJ34 encodes for a replication initiation protein (RepA) and a small polypeptide with unknown function. Plasmids pSt04 and pER1-1 carry in addition to repA genes coding for small heat shock proteins (sHsp). Expression of these proteins is induced at elevated temperatures or low pH and increases the thermo- and acid resistance. Plasmids pER1-2 and pSt22-2 show identical sequences with five putative open reading frames (ORFs). The gene products of ORF1 and ORF4 reveal some similarities to transposon encoded proteins of Bacillus subtilis and Tn916. ORF1 of plasmid pSt106 encodes a protein similar to resolvases of different Gram-positive bacteria. Integrity of ORF2 and 3, encoding a putative DNA primase and a replication protein, is essential for replication. ORF1 to 3 of plasmid pSt08, which are organized in a tricistronic operon, encode a RepA protein, an adenosine-specific methyltransferase, and a type II restriction endonuclease. Another type II restriction-modification (R/M) system is encoded on plasmid pSt0 which is highly similar to those encoded on lactococcal plasmid pHW393 and B. subtilis plasmid pXH13. Plasmid-free derivatives of strains St0 and St08 show increased phage sensitivity, indicating that in the wild-type strains the R/M systems are functionally expressed. Recombinant plasmids based on the replicons of plasmids pSt04, pJ34, pSt106, pSt08, and pSt0, are able to replicate in Lactococcus lactis and B. subtilis, respectively, whereas constructs carrying pER1-2 only replicate in S. thermophilus.