DNA芯片制作原理及其杂交信号检测方法

文章讨论了DNA芯片的制作原理和杂交信号的检测方法。依其结构,DNA芯片可分为两种形式,DNA阵列和寡核苷酸微芯片。DNA芯片的制作方法主要有光导原位合成法和自动化点样法。DNA芯片与标记的探针或DNA样品杂交,并通过探测杂交信号谱型来实现DNA序列或基因表达的分析。适应于DNA芯片的发展,同时出现了许多新型的杂交信号检测方法。主要有激光荧光扫描显微镜、激光扫描共焦显微镜、结合使用CCD相机的荧光显微镜、光纤生物传感器、化学发生法、光激发磷光物质存储屏法、光散射法等。     

A Strategy to Optimize the Oligo-Probes for Microarray-based Detection of Viruses

DNA microarrays have been acknowledged to represent a promising approach for the detection of viral pathogens. However, the probes designed for current arrays could cover only part of the given viral variants, that could result in false-negative or ambiguous data. If all the variants are to be covered, the requirement for more probes would render much higher spot density and thus higher cost of the arrays. Here we have developed a new strategy for oligonucleotide probe design. Using type I human immunodeficiency virus (HIV-1) tat gene as an example, we designed the array probes and validated the optimized parameters in silico. Results show that the oligo number is significantly reduced comparing with the existing methods, while specificity and hybridization efficiency remain intact. The adoption of this method in reducing the oligo numbers could increase the detection capacity for DNA microarrays, and would significantly lower the manufacturing cost for making array chips.     

A strategy to optimize the oligo-probes for microarray-based detection of viruses

DNA microarrays have been acknowledged to represent a promising approach for the detection of viral pathogens. However, the probes designed for current arrays could cover only part of the given viral variants, that could result in false-negative or ambiguous data. If all the variants are to be covered, the requirement for more probes would render much higher spot density and thus higher cost of the arrays. Here we have developed a new strategy for oligonucleotide probe design. Using type I human immunodeficiency virus (HIV-1) tat gene as an example, we designed the array probes and validated the optimized parameters in silico. Results show that the oligo number is significantly reduced comparing with the existing methods, while specificity and hybridization efficiency remain intact. The adoption of this method in reducing the oligo numbers could increase the detection capacity for DNA microarrays, and would significantly lower the manufacturing cost for making array chips. These authors contribute equally to the work.     

High-throughput polymorphism screening and genotyping with high-density oligonucleotide arrays

A highly reliable and efficient technology has been developed for high-throughput DNA polymorphism screening and large-scale genotyping. Photolithographic synthesis has been used to generate miniaturized, high-density oligonucleotide arrays. Dedicated instrumentation and software have been developed for array hybridization, fluorescent detection, and data acquisition and analysis. Specific oligonucleotide probe arrays have been designed to rapidly screen human STSs, known genes and full-length cDNAs. This has led to the identification of several thousand biallelic single-nucleotide polymorphisms (SNPs). Meanwhile, a rapid and robust method has been developed for genotyping these SNPs using oligonucleotide arrays. Each allele of an SNP marker is represented on the array by a set of perfect match and mismatch probes. Prototype genotyping chips have been produced to detect 400, 600 and 3000 of these SNPs. Based on the preliminary results, using oligonucleotide arrays to genotype several thousand polymorphic loci simultaneously appears feasible.     

Evaluation of two- and three-dimensional streptavidin binding platforms for surface plasmon resonance spectroscopy studies of DNA hybridization and protein-DNA binding

Surface plasmon resonance (SPR) spectroscopy has been used to study DNA assembly, DNA hybridization, and protein-DNA interactions on two streptavidin (SA) sensor chips. On one chip, SA molecules are immobilized on a biotin-exposed surface, forming an ordered two-dimensional (2D) SA monolayer. The other chip, BIAcore's SA chip, contains SA molecules immobilized within a three-dimensional (3D) carboxylated dextran matrix. Compared to the 2D chip, the 3D SA matrix allows for a slower immobilization rate of biotinylated DNA due to diffusion limitation in the dextran matrix, but with twice the amount of the immobilized DNA due to the greater number of reactive sites, which in turn enables a higher sensitivity for DNA hybridization detection. Interestingly, having a greater DNA probe dispersion in the 3D matrix does not induce a higher DNA hybridization efficiency. In a study of protein binding to immobilized DNA (estrogen receptor to estrogen response elements), aiming at assessing the DNA sequence dependent protein binding behavior, the 2D and 3D chips produce different binding characteristics. On the 2D chip, the protein binding exhibits a better selectivity to the specific sequences, regardless of binding stringency (e.g. salt concentration), whereas on the 3D chip, the liquid handling system needs to be optimized in order to minimize transport limitations and to detect small affinity differences. Through this study we demonstrate that the physicochemical structure of SPR chips affects the apparent binding behaviors of biomolecules. When interpreting SPR binding curves and selecting a sensor chip, these effects should be taken into account.     

Development of real-time assays for impedance-based detection of microbial double-stranded DNA targets: optimization and data analysis

A real-time, label free assay was developed for microbial detection, utilizing double-stranded DNA targets and employing the next generation of an impedimetric sensor array platform designed by Sharp Laboratories of America (SLA). Real-time curves of the impedimetric signal response were obtained at fixed frequency and voltage for target binding to oligonucleotide probes attached to the sensor array surface. Kinetic parameters of these curves were analyzed by the integrated data analysis package for signal quantification. Non-specific binding presented a major challenge for assay development, and required assay optimization. For this, differences were maximized between binding curve kinetic parameters for probes binding to complementary targets versus non-target controls. Variables manipulated for assay optimization included target concentration, hybridization temperature, buffer concentration, and the use of surfactants. Our results showed that (i) different target-probe combinations required optimization of specific sets of variables; (ii) for each assay condition, the optimum range was relatively narrow, and had to be determined empirically; and (iii) outside of the optimum range, the assay could not distinguish between specific and non-specific binding. For each target-probe combination evaluated, conditions resulting in good separation between specific and non-specific binding signals were established, generating high confidence in the SLA impedimetric dsDNA assay results.     

Single nucleotide polymorphism typing on DNA array with hydrophobic surface fabricated by plasma-polymerization technique

A DNA array has been fabricated on glass substrates, which enables high-throughput analysis of single-base mismatches. In this work, microfabrication-compatible plasma-polymerization (PP) method was used for immobilizing probe DNAs to study the hybridization behavior by changing surface properties. The immobilization matrix consisting of 35 A of PP layer, applied additionally on the streptavidin absorbed hexamethyldisiloxane (HMDS)-PP layer, was constructed on the substrates to anchor biotinylated DNA probes onto the surface. The hydrophobic immobilization matrix was considered to enhance hybridization accuracy and efficiency, compared with its hydrophilic acetonitrile-PP layers. The oligonucleotide arrays fabricated on HMDS-PP surface were shown to be effective in detection of single nucleotide polymorphisms (SNPs) of ApoE gene.     

Creating highly dense and uniform protein and DNA microarrays through photolithography and plasma modification of glass substrates

We demonstrate a method to create high density protein microarrays with excellent spot uniformity using photolithography and plasma processing on low cost commercially available microscope glass slides. Protein deposition and fluorescence signal evaluation on these substrates are performed by standard arrayers and scanners. To this end, spots of commercial photoresists (AZ5214, SU8 and Ormocomp(?)) were defined through lithography on glass substrates followed by short SF(6) plasma treatment and selective protein adsorption on these spots with respect to glass (spot to background fluorescence signal ratios 30:1 to 40:1) was demonstrated using model protein binding assays. Among the photoresists tested, Ormocomp was selected since it provided the highest protein binding capacity. No ageing of Ormocomp/glass substrates in terms of protein binding capacity was observed for at least two months. Besides to protein microarrays, DNA microarrays were also developed by spotting streptavidin-biotinylated oligonucleotide conjugates corresponding to wild- and mutant-type sequences of four deleterious BRCA1 gene mutations. For all of the examined mutations, higher specific hybridization signals (1.5-4 times) and improved discrimination ratios between wild- and mutant-type sequences as well as higher spot uniformity and repeatability were demonstrated on Ormocomp/glass substrates with intra- and inter-spot CVs of 8.0% and 4.5%, respectively, compared to commercial polystyrene (intra- and inter-spot CVs 36% and 18%) and epoxy-coated glass (intra- and inter-spot CVs 26% and 20%) slides. Thus, the proposed substrates can be readily applied to protein and DNA microarrays fabrication and, moreover, the described method for selective protein adsorption can be advantageously implemented in various analytical microdevices for multi-analyte detection.     

High reproducibility using sodium hydroxide-stripped long oligonucleotide DNA microarrays

Recently, long oligonucleotide (60- to 70-mer) microarrays for two-color experiments have been developed and are gaining widespread use. In addition, when there is limited availability of mRNA from tissue sources, RNA amplification can and is being used to produce sufficient quantities of cRNA for microarray hybridization. Taking advantage of the selective degradation of RNA under alkaline conditions, we have developed a method to "strip" glass-based oligonucleotide microarrays that use fluorescent RNA in the hybridization, while leaving the DNA oligonucleotide probes intact and usable for a second experiment. Replicate microarray experiments conducted using stripped arrays showed high reproducibility, however, we found that arrays could only be stripped and reused once without compromising data quality. The intraclass correlation (ICC) between a virgin array and a stripped array hybridized with the same sample showed a range of 0.90-0.98, which is comparable to the ICC of two virgin arrays hybridized with the same sample. Using this method, once-stripped oligonucleotide microarrays are usable, reliable, and help to reduce costs.     

Oligonucleotide array for detection of common severe determinants of alpha thalassemia

A simple and an efficient oligonucleotide array was developed to identify common severe determinants of alpha (alpha) thalassemia. A total of 14 probes were designed to detect the most frequently three deletions (-alpha(3.7), -alpha(4.2), -(SEA)) and two non-deletions (alpha(Quong Sze), alpha(Constant Spring)). PCR products were amplified from human genomic DNA and allowed to hybridize with the oligonucleotide array. Hybridization was detected by fluorescence scanning, and alpha globin genotypes were assigned by quantitative analysis of the hybridization results. The efficiency and specificity of identifying alpha globin genotypes using the oligonucleotide arrays was evaluated by blinded analysis of 690 samples from unrelated individuals. The oligonucleotide array method described in this paper provides unambiguous detection of complex combinations of heterozygous, compound heterozygous and homozygous alpha thalassemia genotypes. The experimental results demonstrate that this methodological approach may be applied for screening and for hemological diagnosis in population at large.     

Characterization of DNA chips by nanogold staining

DNA microarray is an important tool in biomedical research. Up to now, there are no chips that can allow both quality analysis and hybridization using the same chip. It is risky to draw conclusions from results of different chips if there is no knowledge of the quality of the chips before hybridization. In this article, we report a colorimetric method to do quality control on an array. The quality analysis of probe spots can be obtained by using gold nanoparticles with positive charges to label DNA through electrostatic attraction. The probe spots can also be detected by a simple personal computer scanner. Gold nanoparticles deposited on a glass surface can be dissolved in bromine-bromide solution. The same microarray treated with gold particles staining and destaining can still be used for hybridization with nearly the same efficiency. This approach makes quality control of a microarray chip feasible and should be a valuable tool for biomarker discovery in the future.     

A Comparison of Hybridization Efficiency between Flat Glass and Channel Glass Solid Supports

Two different solid supports, channel glass and flat glass, were compared for their affect on the sensitivity and efficiency of DNA hybridization reactions. Both solid supports were tested using a set of arrayed, synthetic oligonucleotides that are designed to detect short insertion/deletion polymorphisms (SIDPs). A total of 13 different human SIDPs were chosen for analysis. Capture probes, designed for this test set, were covalently immobilized on substrates. Hybridization efficiency was assessed using fluorescently labeled stacking probes which were preannealed to the target and then hybridized to the support-bound oligonucleotide array; the hybridization pattern was detected by fluorescence imaging. It was found that structural features of nucleic acid capture probes tethered to a solid support and the molecular basis of their interaction with targets in solution have direct implications on the hybridization process. Our results demonstrate that channel glass has a number of practical advantages over flat glass including higher sensitivity and a faster hybridization rate.     

Kinetics of oligonucleotide hybridization to photolithographically patterned DNA arrays

The hybridization kinetics of oligonucleotide targets to oligonucleotide probe arrays synthesized using photolithographic fabrication methods developed by Affymetrix have been measured. Values for the fundamental adsorption parameters, k(a), k(d), and K, were determined at both room temperature and 45 degrees C by monitoring the hybridization of fluorescently labeled targets to the array. The values for these parameters and the adsorbed target density (相似文献   

DNA芯片与应用

DNA芯片就是利用光导原位化学合成或液相合成自动化点样,将数以万计的寡核苷酸固定于固相支持物硅片、尼龙膜上,与荧光素或同位素标记的特检样本DNA/cDNA杂交,通过对杂交信号分析反映样本中的DNA序列信息。它广泛应用基因表达、DNA测序、基因分型、基因突变与多态性检测和遗传作图等生物医学研究领域。     

Optimal sequencing by hybridization in rounds.

Sequencing by hybridization (SBH) is a method for sequencing DNA. The Watson-Crick complementarity of DNA can be used to determine whether the DNA contains an oligonucleotide substring. A large number of oligonucleotides can be arranged on an array (SBH chip). A combinatorial method is used to construct the sequence from the collection of probes that occur in it. We develop an idea of Margaritis and Skiena and propose an algorithm that uses a series of small SBH chips to sequence long strings. The total number of probes used by our method matches the information theoretical lower bound up to a constant factor.     

Hybridization properties of immobilized nucleic acids.

The 5'-end attachment of oligonucleotides to dextran supports facilitates the study of the hybridization properties of an immobilized oligonucleotide system. The hybridization properties which were studied include: hybridization capacity and kinetics, hybridization-complex stability, and reagents influencing hybridization efficiency. Results of these experiments reveal that the hybridization efficiencies of support-bound oligonucleotides were 75-80% and 40-50% for single-stranded oligonucleotide targets and long double-stranded targets, respectively. These hybridization efficiencies are dependent upon prehybridizing the support-bound oligonucleotides with dextran sulfate. In addition, comparisons of the relative hybridization efficiencies of the support-bound oligonucleotide and nitrocellulose-based systems have been made which indicate a retention of 13-28% of target sequences on the filters and a detection efficiency of 8-20%.     

Real-time measurements of DNA hybridization on microparticles with fluorescence resonance energy transfer

When capture oligonucleotides are tethered on planar surfaces, mass transport limitations influence the kinetics of solid-phase nucleic acid hybridizations. By diffusion theory, however, hybridization of oligonucleotides on microparticles should be reaction-rate limited. In an initial effort to understand the kinetics of microparticle hybridization reactions, we developed a fluorescence resonance energy transfer method for monitoring oligonucleotide hybridization on microparticles. Microparticles were coated with a fluoresceinated oligomer at surface densities of 20, 40, and 80% saturation, hybridized to a complementary oligonucleotide labeled with tetramethylrhodamine, and monitored over time for quenching of the fluorescein signal as hybridization occurred on the particle surface. Association rate constants were compared for microparticle-based hybridization and solution-phase hybridization. Rate constants for hybridizations on the particle surface were about an order of magnitude less than those for hybridization in solution, but decreasing the surface density of the capture oligonucleotide to 20% saturation improved particle hybridization rates. Although a bimolecular reaction model adequately described solution-phase hybridization kinetics, oligonucleotide hybridization on microparticles did not fit this model but exhibited biphasic reaction kinetics. Based on two different lines of reasoning, we argue that microparticle-based oligonucleotide hybridization was indeed reaction-rate limited in our system and not diffusion-rate limited.     

Maskless fabrication of light-directed oligonucleotide microarrays using a digital micromirror array.

Oligonucleotide microarrays, also called "DNA chips," are currently made by a light-directed chemistry that requires a large number of photolithographic masks for each chip. Here we describe a maskless array synthesizer (MAS) that replaces the chrome masks with virtual masks generated on a computer, which are relayed to a digital micromirror array. A 1:1 reflective imaging system forms an ultraviolet image of the virtual mask on the active surface of the glass substrate, which is mounted in a flow cell reaction chamber connected to a DNA synthesizer. Programmed chemical coupling cycles follow light exposure, and these steps are repeated with different virtual masks to grow desired oligonucleotides in a selected pattern. This instrument has been used to synthesize oligonucleotide microarrays containing more than 76,000 features measuring 16 microm 2. The oligonucleotides were synthesized at high repetitive yield and, after hybridization, could readily discriminate single-base pair mismatches. The MAS is adaptable to the fabrication of DNA chips containing probes for thousands of genes, as well as any other solid-phase combinatorial chemistry to be performed in high-density microarrays.     

A rapid method for the construction of oligonucleotide arrays

A simple method has been devised to construct oligonucleotide array on a variety of surfaces using commonly available reagents and chemistry with good efficiency and accuracy. The method involves the generation of hydroxyl functionalities on glass, polypropylene, polyethylene, and commonly used surfaces for construction of oligonucleotide arrays followed by their activation with trifluoroethanesulfonyl chloride (tresyl chloride). The activated surface in the subsequent reaction is used to covalently immobilize oligonucleotides in regioselective fashion to create an oligonucleotide array. The surface bound tresyl sulfonate esters allow the immobilization of oligonucleotides specifically via their 3'- or 5'-end having mercaptohexyl- or aminohexyl functionalities. The constructed oligonucleotide arrays were successfully used to analyze oligonucleotides by hybridization technique.