Proinflammatory properties of unsaturated fatty acids and their monohydroxy metabolites

The proinflammatory effects of unsaturated fatty acids and, where appropriate, their monohydroxy derivatives, have been investigated both by application to human skin and with respect to human polymorphonuclear leukocyte (PMN) migration. Of the fatty acids applied to the skin only eicosapentaenoic and arachidonic acids (EPA;AA) produced consistent, measurable erythema. The monohydroxy derivatives of the two fatty acids also caused erythema. the 12-hydroxy isomers being the most potent. Chemokinetic activity towards PMNs was observed in the presence of AA, EPA and α-linolenic acid using an agarose microdroplet chemokinesis assay. In contrast to their properties, the 5-hydroxy isomers of AA and EPA were the most potent, being approximately 10 times more chemokinetically active than the other isomers. Quantification of the hydroxyeicosatetraenoic and hydroxyeicosapentaenoic acids (HETEs;HEPEs) in the lesional skin of psoriatic patients demonstrated that, of the metabolites measured, 12-HETE was present in the greatest amounts. Twenty five times more 12-HETE than 12- or 15-HEPE was detected, these being the most abundant of teh HEPEs formed. The monohydroxy derivatives of AA and EPA may contribute to the inflammatory changes observed in psoriasis. The HETEs appear to be of greater importance than the HEPEs in view of the relative amounts present.     

Proinflammatory properties of unsaturated fatty acids and their monohydroxy metabolites

The proinflammatory effects of unsaturated fatty acids and, where appropriate, their monohydroxy derivatives, have been investigated both by application to human skin and with respect to human polymorphonuclear leukocyte (PMN) migration. Of the fatty acids applied to the skin only eicosapentaenoic and arachidonic acids (EPA; AA) produced consistent, measurable erythema. The monohydroxy derivatives of the two fatty acids also caused erythema, the 12-hydroxy isomers being the most potent. Chemokinetic activity towards PMNs was observed in the presence of AA, EPA and alpha-linolenic acid using an agarose microdroplet chemokinesis assay. In contrast to their in vivo properties, the 5-hydroxy isomers of AA and EPA were the most potent, being approximately 10 times more chemokinetically active than the other isomers. Quantification of the hydroxyeicosatetraenoic and hydroxyeicosapentaenoic acids (HETEs; HEPEs) in the lesional skin of psoriatic patients demonstrated that, of the metabolites measured, 12-HETE was present in the greatest amounts. Twenty five times more 12-HETE than 12- or 15-HEPE was detected, these being the most abundant of the HEPEs formed. The monohydroxy derivatives of AA and EPA may contribute to the inflammatory changes observed in psoriasis. The HETEs appear to be of greater importance than the HEPEs in view of the relative amounts present.     

Biosorbents for heavy metals removal and their future

A vast array of biological materials, especially bacteria, algae, yeasts and fungi have received increasing attention for heavy metal removal and recovery due to their good performance, low cost and large available quantities. The biosorbent, unlike mono functional ion exchange resins, contains variety of functional sites including carboxyl, imidazole, sulphydryl, amino, phosphate, sulfate, thioether, phenol, carbonyl, amide and hydroxyl moieties. Biosorbents are cheaper, more effective alternatives for the removal of metallic elements, especially heavy metals from aqueous solution. In this paper, based on the literatures and our research results, the biosorbents widely used for heavy metal removal were reviewed, mainly focusing on their cellular structure, biosorption performance, their pretreatment, modification, regeneration/reuse, modeling of biosorption (isotherm and kinetic models), the development of novel biosorbents, their evaluation, potential application and future. The pretreatment and modification of biosorbents aiming to improve their sorption capacity was introduced and evaluated. Molecular biotechnology is a potent tool to elucidate the mechanisms at molecular level, and to construct engineered organisms with higher biosorption capacity and selectivity for the objective metal ions. The potential application of biosorption and biosorbents was discussed. Although the biosorption application is facing the great challenge, there are two trends for the development of the biosorption process for metal removal. One trend is to use hybrid technology for pollutants removal, especially using living cells. Another trend is to develop the commercial biosorbents using immobilization technology, and to improve the biosorption process including regeneration/reuse, making the biosorbents just like a kind of ion exchange resin, as well as to exploit the market with great endeavor.     

Chemoenzymatic synthesis of surfactants from carbohydrates, amino acids, and fatty acids

The chemoenzymatic synthesis of new surfactants is reported; they were prepared from unprotected carbohydrates, amino acids, and fatty acids. This study pointed out the factors that govern the possibility to enzymatically bind the carbohydrate to the amino acid.     

Synthesis and mechanical properties of quaternary salts of chitosan-based films for food application

A novel method is described to synthesize quaternary salts of chitosan with dimethylsulfate and subsequently cast films. In an attempt to improve both mechanical and hydrophobic characteristics, the chitosan was previously modified by N-alkylation, introducing 4, 8 and 12 carbons moieties into the polymeric chain. Analysis by FTIR and solid-state CP-MAS (13)C NMR spectroscopy confirmed the success of both alkylation and quaternization processes. The average degree of quaternization of these N-methylated derivatives was calculated to be 35%. DMA measurements indicated that chitosan and its derivative films are typically brittle materials, exhibiting similar non-linear viscoelastic behaviors. The films of unmodified chitosan have a very small strain (approximately 2.8%), though they were the most resistant films (Young's modulus=2283 MPa; tensile strength >44.0 MPa). In general, the alkyl-chitosan derivatives appear to be more plastic than chitosan films but less resistant, e.g., for butyl chitosan: maximum strain=13.1%; tensile strength=13.4 MPa and Young's modulus=171 MPa. Conversely the quaternization reaction increased the hardness of the parent sample, viz. for quaternary salt of dodecyl chitosan: maximum strain=2.6%; tensile strength=38.3 MPa and Young's modulus=1792 MPa.     

Synthesis of unsaturated fatty acids

This article reviews synthetic routes leading to polyunsaturated fatty acids having “skipped” double bonds. Emphasis is placed on the “acetylenic approach”.The suitability of building blocks, their condensation reactions as well as the controlled reduction of triple bonds to cis double bonds are discussed. In addition, the application of the various methods to the preparation of polyunsaturated fatty acids labelled with ³H and/or ¹⁴C at distinct positions of the molecules is reviewed.     

Selective adsorption/desorption of nucleic acids on submicron-sized polymeric particles

DNA can be removed or separated by the selective adsorption/desorption on positively charged submicronsized polymeric particles (SSPP). The selective adsorption of DNA, in the presence of protein, on positively charged SSPP was accomplished by increasing the concentration of potassium phosphate or sodium phosphate. The adsorption of DNA was not affected by the concentration of potassium phosphate or sodium phosphate up to 1.2M. On the other hand, the adsoprtion of a protein (bovine serum albumin) was completely impeded by 170mM potassium phosphate. DNA adsorbed on SSPP could be desorbed by increasing the concentration of NaCl or KCl, thus it can be recovered. DNA desorbed from SSPP when the concentration of NaCl or KC was higher than 0.6M. A complete desorption of DNA was achieved at the concentration of NaCl or KCl above 1.2M.     

Synthesis and antibacterial properties of carbohydrate-templated lysine surfactants

The synthesis of four dicationic glucose-templated d-lysine-derived surfactants and their two unmodified d-lysine-analogs is described. Replacement of d-lysine by d-glucose-templated-d-lysine provides a general tool to introduce chemical diversity into the side chain of lysine. The presence of the polyfunctional d-gluco-configured polyol scaffold provides rich opportunities to study structure–activity relationships in lysine–lipid conjugates. All cationic lipids were tested for inhibition of bacterial growth using a panel of clinically relevant Gram-positive and Gram-negative strains. Our results show that substitution of d-lysine by d-glucose-templated d-lysine surfactants retains, but does not improve, the antibacterial activity. Similarly, conversion of the d-gluco-based polyol scaffold into a hydrophobically enhanced tri-O-phenylcarbamate scaffold does not further enhance the antibacterial activity of the cationic lipid. However, improvements in the antibacterial activity were observed by guanidinylation of the two lysine-based amino groups.     

Nutritional properties of trans fatty acids

The role of trans fatty acids (TFA) present in partially hydrogenated fats widely consumed in food and their link with coronary heart disease has been examined in this review. Most of the studies carried out have been on the effects of TFA on blood-lipid profile. The perceived effects of TFA intake depend on the fat or oil with which they are compared and appears to be in between that of dietary saturated fats and monounsaturated fatty acids. When compared to saturated fat, TFA intake shows lower levels of total and LDL-cholesterol in blood. But when both TFA and saturated fatty acids are compared with cis fatty acids or native unhydrogenated oil, increase in total and LDL-cholesterol are noted. The effects of TFA on HDL-cholesterol and Lp(a) are not clearly established. The undesirable effects of TFA can be overcome by inclusion of essential fatty acids at a minimum of 2 energy per cent level in the diet. The link between trans fatty acid intake and coronary heart disease (CHD) are not unequivocally established.     

Inhibition of methanogenesis in pure cultures by ammonia, fatty acids, and heavy metals, and protection against heavy metal toxicity by sewage sludge

The effect of ammonium chloride, sodium butyrate, sodium propionate, and the heavy metals nickel, zinc, and copper on methanogenesis by pure cultures of Methanospirillum hungatei, Methanosarcina barkeri, Methanobacterium thermoautotrophicum, and Methanobacterium formicicum at pH 6.5 was studied. The latter three strains were resistant to greater than 60 g/L of the volatile fatty acids and to greater than 10 g/L of NH3 N. Methanospirillum hungatei was somewhat more sensitive with 50% inhibition of methanogenesis occurring at 4.2 g/L NH3 N, 27 g/L butyrate, and 41 g/L propionate. All strains were very sensitive to both copper (1-5 mg/L) and zinc (1-10 mg/L), but much more resistant to nickel. Zinc and copper concentrations 30 to 270 times higher were required to cause inhibition of Msp. hungatei incubated in sewage sludge compared with buffer, indicating a strong protective environment was afforded the methanogens against heavy metal toxicity in the sludge.     

The formation of polymeric model biomembranes from diacetylenic fatty acids and phospholipids

Diacetylenic fatty acid monolayers at the air/water interface and multilayers on suitable supports polymerise when exposed to ultraviolet radiation. It has been found that polymerisation still occurs when monolayers are diluted with cholesterol or gramicidin. The rigid, crystalline nature of the films formed makes them useful biomembrane models. Phospholipids made from the fatty acids were less reactive. Multilayers deposited on hydrophobic supports would polymerise but not monolayers on water.     

Synthesis and characterization of chitosan-based hydrogels

Biocompatible hydrogels based on water-soluble chitosan–ethylene glycol acrylate methacrylate (CS–EGAMA) and polyethylene glycol diamethacrylate (PEGDMA) were synthesized by photopolymerization. Characterization of morphology, weight loss, water state of hydrogel, pH-sensitivity and cytotoxicity were investigated by scanning electron microscopy (SEM), thermal gravimetric analysis (TGA), X-ray diffraction (XRD), differential scanning calorimetry (DSC), Fourier transform infrared (FTIR), swelling test and methylthiazolydiphenyl-tetrazolium bromide (MTT) assay. The results indicated that the hydrogels were sensitive to pH of the medium, no cytotoxicity for L929 and SW1353, satisfactory for the composite to be used in bioapplications.     

Synthesis of medium-chain fatty acids and their incorporation into triacylglycerols by cell-free fractions fromCuphea embryos

During their rapid maturation period, seeds of Cuphea wrightii A. Gray mainly accumulate medium-chain fatty acids (C₈ to C₁₄) in their storage lipids. The rate of lipid deposition (40–50 mg·d^–1·(g fresh weight)^–1) is fourfold higher than in seeds of Cuphea racemosa (L. f.) Spreng, which accumulate long-chain fatty acids (C₁₆ to C₁₈). Measurements of the key enzymes of fatty-acid synthesis in cell-free extracts of seeds of different maturities from Cuphea wrightii show that malonyl-CoA synthesis may be a triggering factor for the observed high capacity for fatty-acid synthesis. Experiments on the incorporation of [1-¹⁴C]acetate into fatty acids by purified plastid preparations from embryos of Cuphea wrightii have demonstrated that the biosynthesis of medium-chain fatty acids (C₈ to C₁₄) is localized in the plastid. Thus, in the presence of cofactors for lipid synthesis (ATP, NADPH, NADH, acyl carrier protein, and sn-glycerol-3-phosphate), purified plastid fractions predominantly synthesized free fatty acids, 30% of which were of medium chain length. Transesterification of the freshly synthesized fatty acids to coenzyme A and recombination with the microsomal fraction of the embryo homogenate induced triacylglycerol synthesis. It also stimulated fatty-acid synthesis by a factor 2–3 and increased the relative amount of medium-chain fatty acids bound to triacylglycerols, which corresponded to about 60–80% in this lipid fraction.Abbreviations ACP acyl carrier protein - FW fresh weight This work was supported by the Bundesminister für Forschung und Technologie. The authors thank S. Borchert for her suggestions for plastid preparation.     

食品中重金属的存在形态及其与毒性的关系

简要介绍了近年来有关食品中重金属形态及其毒性关系的研究进展,归纳了食品中重金属的化学形态特征、不同类型食品中重金属的存在形态、食品中重金属形态与生物有效性和毒性的关系,以及该领域中急需研究解决的问题．     

土壤中重金属形态分析及其环境学意义

介绍了土壤重金属的形态及各种分析方法,重点说明了土壤中重金属形态分布及影响因素;讨论了影响土壤环境中重金属形态转化的因素,重金属形态与重金属在土壤中的迁移性、可给性、活性的关系,重金属污染土壤修复与重金属形态分布的关系.形态分析在一定程度上反映自然与人为作用对土壤中重金属来源的贡献,并反映重金属的生物毒性.重金属可以因形态中某一个或几个方面不同而表现出不同的毒性和环境行为.     

Purification and spectroscopic properties of pyrene fatty acids

Pyrene fatty acids are routinely purified by silica based column chromatography and analyzed on thin-layer silica plates (H.-J. Galla et al., Chem. Phys. Lipids, 23 (1979) 239-251). Although pyrene decanoic acid runs as a single spot on thin-layer chromatography (TLC), gas-liquid chromatography (GC) of the methyl ester derivatives of a representative sample revealed four separate peaks with the major component only 92% of the total. High performance reverse phase liquid chromatography (HPLC) was used to purify pyrene decanoic acid and separate the contaminants. After two passes on a C18 reverse phase HPLC column, pyrene decanoic acid is 99.98% pure by GC analysis. Absorption, fluorescence, and NMR spectra were recorded for pyrene decanoic acid and the major impurities. The results indicate that one impurity is a C10 fatty acid with an altered aromatic moiety. Two other impurities are pyrene derivatives but their acyl chains probably are not decanoic acid.     

Horse chestnut (Aesculus hippocastanum L.) seed fatty acids,flavonoids and heavy metals plasticity to different urban environments

Horse chestnut (Aesculus hippocastanum L.) is a deciduous tree which is widely used on urban green spaces in Serbia. Also, the seed of horse chestnut is an important raw material in pharmaceutical industry, owing to its medicinal properties. In this study, the content of fatty acids, flavonoids, aescin and heavy metals in seeds of 11 horse chestnut genotypes growing in urban conditions was investigated. A total of 16 fatty acids were identified. Unsaturated fatty acids in seed samples were the most abundat. Among the saturated fatty acids, palmitic acid was the dominant one, with a total average content of 8.12%. Oleic acid, with the total average content of 53.46%, was the most abundant unsaturated fatty acid. The results of this study indicated the presence of the following flavonoids: quercetin, kaempferol and rutin. Rutin was the most abundant, averagely contributing with 6.071 μg/g to the total quantified polyphenolics in all samples. The total aescin content ranged from 0.82% to 4.16%. Fruits of park and street trees from small- and middle-sized cities can be used in pharmaceutical industry as raw material. Differences between different urban site categories and localities were detected, which indicates the biochemical plasticity of the seeds to urban morphology.