Nucleotide sequence of the transposable element IS15

We have determined the complete nucleotide sequence of the right (R) copy of the insertion sequence IS15 which flanks, in direct orientation, the composite transposon Tn1525. IS15-R, which is capable of independent transposition, is 1648 bp long and has short (14 bp) perfect inverted repeats at its termini. Analysis of the nucleotide sequence indicates that IS15-R results from the transposition, in direct orientation, of a smaller (820 bp long) IS, designated IS15-Δ, into itself. This integration event is accompanied by the duplication of 8 bp in the target DNA. IS15-Δ possesses two large overlapping open reading frames (ORF) located on opposite strands. Because of this particular structure, IS15 possesses four large ORFs which, due to the integration event, exhibit some differences with those of the parental 1S15-Δ.     

The use of an improved transposon mutagenesis system for DNA sequencing leads to the characterization of a new insertion sequence of Streptomyces lividans 66

A DNA sequencing strategy was developed based on the tetracycline resistance transposon Tn1721. A universal M13 primer binding site (UP) for DNA sequencing and restriction sites for mapping were inserted near one end of Tn1721 and the new derivative, Tn5491, introduced onto a conjugative F' plasmid. The target sequence is inserted between two inverted resolution sites (res) of Tn1721 present on the high-copy plasmid pJOE2114. Due to the inviability of long palindromic sequences in Escherichia coli insertions between the inversely orientated res sites of pJOE2114 are positively selected. Transposition of Tn5491 into the target sequence is selected by cointegrate formation of Tn5491 during transposition, mating and transfer of the nonconjugative sequencing vector. After cointegrate resolution, the additional res sites in the vector result in a second site-specific recombination removing most of the transposon (except of 136 bp) and part of the target sequence. The reduced plasmid sizes and the use of the universal primer improved the quality of the sequencing results obtained on an automated fluorescent sequencer. A 3.35-kb EcoRI fragment from the 30-kb terminal inverted repeats (TIR) of the Streptomyces lividans chromosome was sequenced by this method. A 1304-bp sequence was found on this fragment with the features of insertion elements. The element called IS1372 had 27-bp IR and two potential open reading frames. The predicted gene products had similar sizes and high similarity to gene products encoded by insertion sequences of the IS3 family. Furthermore, a potential signal stimulating ribosomal shifts and typical for members of the IS3 family was identified. Five to seven copies of IS1372 were found in different strains of S. lividans but none in other Streptomyces species tested     

The istA gene of insertion sequence IS21 is essential for cleavage at the inner 3'' ends of tandemly repeated IS21 elements in vitro.

The bacterial 2.1 kb insertion sequence IS21 occurs as a tandem repeat [=(IS21)2] on the broad host range plasmid R68.45. In (IS21)2, the two IS21 elements are separated by 3 bp termed junction sequence. Plasmids carrying (IS21)2 form cointegrates with other replicons at high frequencies. The two IS21 genes, istA and istB, were found to be necessary for cointegrate formation in vivo. Since the outer ends of (IS21)2 are dispensable for cointegrate formation, we favor a transposition model according to which a plasmid carrying (IS21)2 is cleaved at the junction sequence; the opened plasmid is then inserted into a target replicon. Here we show that Escherichia coli cell extracts, which contained over-produced IstA protein, nicked a supercoiled (IS21)2 plasmid precisely at the inner 3' termini of IS21; the resulting staggered cut generated 5' protrusions. The istA gene, but not the istB gene, was required for in vitro cleavage of an IS21-IS21 junction. Because of this cleavage and our previous findings (generation of 4 bp target duplications and loss of the junction sequence after cointegrate formation in vivo) we propose that plasmids with (IS21)2 produce cointegrates by a mechanism which involves joining of the inner 3' ends of IS21 to the 5' ends of the target.     

Transposition and targeting of the prokaryotic mobile element IS30 in zebrafish

We provide evidence that a prokaryotic insertion sequence (IS) element is active in a vertebrate system. The transposase of Escherichia coli element IS30 catalyzes both excision and integration in extrachromosomal DNA in zebrafish embryos. The transposase has a pronounced target preference, which is shown to be modified by fusing the enzyme to unrelated DNA binding proteins. Joining the transposase to the cI repressor of phage λ causes transposition primarily into the vicinity of the λ operator in E. coli, and linking to the DNA binding domain of Gli1 also directs the recombination activity of transposase near to the Gli1 binding site in zebrafish. Our results demonstrate the possibility of fusion transposases to acquire novel target specificity in both prokaryotes and eukaryotes.     

Intermolecular Transposition of Is10 Causes Coupled Homologous Recombination at the Transposition Site

Interplasmid and chromosome to plasmid transposition of IS10 were studied by assaying inactivation of the phage 434 cI gene, carried on a low copy number plasmid. This was detected by the activity of the tet gene expressed from the phage 434 P(R) promoter. Each interplasmid transposition resulted in the fusion of the donor and acceptor plasmids into cointegrate structure, with a 9-bp duplication of the target DNA at the insertion site. Cointegrate formation was abolished in δrecA strains, although simple insertions of IS10 were observed. This suggests a two-stage mechanism involving IS10 conservative transposition, followed by homologous recombination between the donor and the acceptor. Two plasmids carrying inactive IS10 sequences were fused to cointegrates at a 100-fold lower frequency, suggesting that homologous recombination is coupled to and stimulated by the transposition event. Each IS10 transposition from the chromosome to the acceptor plasmid involved replicon fusion, providing a mechanism for IS10-mediated integration of extrachromosomal elements into the chromosome. This was accompanied by the formation of an additional copy of IS10 in the chromosome. Thus, like replicative transposition, conservative transposition of IS10 is accompanied by cointegrate formation and results in duplication of the IS10.     

Identification of a new insertion element, similar to gram-negative IS26, on the lactose plasmid of Streptococcus lactis ML3.

In Streptococcus lactis ML3, the lactose plasmid (pSK08) forms cointegrates with a conjugal plasmid (pRS01). It has been proposed that cointegration is mediated by insertion sequences (IS) present on pSK08 (D. G. Anderson and L.L. McKay, J. Bacteriol. 158:954-962, 1984). We examined the junction regions of the cointegrate pPW2 and the corresponding regions of pSK08 (donor) and pRS01 (target) and identified a new IS element on pSK08 (ISS1S) which was involved in and duplicated during formation of pPW2. ISS1S was 808 base pairs (bp) in size, had 18-bp inverted repeats (GGTTCTGTTGCAAAGTTT) at its ends, contained a single long open reading frame encoding a putative protein of 226 amino acids, and generated 8-bp direct repeats of target DNA during cointegrate formation. An iso-IS element, ISS1T, which is duplicated in some other cointegrate plasmids, was also found on pSK08. ISS1T was also 808 bp in size and was identical to ISS1S in sequence except for 4 bp, none of which altered the inverted repeats or amino acid sequence of the open reading frame. Comparison of ISS1 with gram-negative IS26 revealed strong homologies in size (820 bp), sequence of inverted repeats (GGCACTGTTGCAAA), size of direct repeats generated after cointegration (8 bp), and number, size, and amino acid sequence (44.5% identical) of the open reading of frame.     

Structure and stability of Tn9-mediated cointegrates. Evidence for two pathways of transposition

We have measured the frequency of Tn9 transposition and cointegrate formation in several different ways and have examined the stability of the cointegrates. We have also physically analyzed the structure of 40 independently derived cointegrate molecules. We present evidence here that Tn9, unlike the transposable element Tn3, does not transpose via an obligate cointegrate intermediate. We suggest that transposition of Tn9 leads to two, mutually exclusive, end-products: either direct insertion of the element into a recipient replicon (transposition), or fusion between donor and recipient replicons (cointegrate formation). This conclusion is based on our observations that, while Tn9-mediated cointegrates are very stable, they are formed at a rate lower than the transposition frequency. This finding is discussed in terms of current models for transposition.We also present evidence that clearly demonstrates the compound nature of Tn9. We find that the individual flanking IS1 elements are more active than the entire Tn9 transposon in cointegrate formation. In addition, we find that one IS1 element that is proximal to the cam gene promoter, is more active than the other, and suggest that the difference in activity might be due to differences in nucleotide sequence at their extremities.     

Structural and functional organization of the transposon Tn2555 carrying saccharose utilization genes

Transposon Tn2555 was isolated from a clinical E. coli strain carries the genes for sucrose utilization. Previously it was shown that Tn2555 is very unstable and undergoes structural rearrangements with a high frequency. Several deletion derivatives of Tn2555 and one with an inversion of the internal segment were found. They form the Tn2555 transposon family. This paper describes further structural and functional analysis of Tn2555. In the course of the experiments on pBR325 (Mob-) mobilization by conjugative RP4 derivatives, containing Tn2555 family elements, it was found, that all of them induce cointegrate formation. Some of these cointegrates were able to dissociate in rec+ and recA E. coli cells. Restriction endonuclease analysis of the resulting plasmids have shown, that among them were the end products of the Tn2555 transposition from RP4 to pBR325. Besides, the pBR325 derivatives, containing a discrete DNA segment of approximately 800 b.p., originating from Tn2555, were found. The segment can transpose from pBR325 to RP4 indicating that it is an insertion sequence. This new IS-element was designated IS286. The size and the genetic properties of IS286 resemble those of the IS1 element. However restriction analysis and Southern hybridization data show no significant homology between IS286 and IS1. It was found that the Tn2555 family elements are flanked by directly repeated IS286. One of them (Tn2555.3) contains an additional copy of IS286 in its internal region.     

Cointegrate resolution following transposition of Tn1792 in Streptomyces avermitilis facilitates analysis of transposon-tagged genes.

The insertion sequence IS6100, belonging to the IS6 family, normally forms a cointegrate as an end product of transposition. The IS6100-based minitransposon, Tn1792, has been developed as a genetic tool to mutagenise antibiotic-producing Streptomyces. Here, we describe resolution of Tn1792 cointegrates in Streptomyces avermitilis that can facilitate both the initial isolation of Tn1792 insertion mutants and also the subsequent rescue of Tn1792-tagged sequences. This is the first reported example of cointegrate resolution for an IS6-type transposable element. As a result of mutagenesis, several putative genes involved in morphological development and antibiotic production have been isolated.     

Structure and stability of cointegrating plasmids mediated by the IS1 elements in transposon delta Tn9'

In order to elucidate the structural features of the transposon Tn9', representative of the Tn9 family, which define the ability of the transposon to produce unstable cointegrates, we have obtained a derivative of this transposon carrying a deletion in its central region. The deletion in the obtained transposon delta Tn9' covers a DNA segment of about 50 bp in length, occupying the most distal position in relation to the cat gene, at its junction with the right copy of the IS1. The structure and stability of the IS1/delta Tn9'-mediated cointegrates between the plasmids pDK57.1 (pBR322::delta Tn9') and pRP3.1, a deletion derivative of RP1, have been studied. The three types of cointegrates were found. Those of the type I are predominantly formed, due to the left copy of the IS1 which in delta Tn9' occupies proximal position to the promoter of the cat gene. These cointegrates contain three copies of IS1 and are of high stability. The cointegrates of the type II contain two entire copies of delta Tn9' (i.e. four copies of IS1) as well as the structures of the type II, representing the cointegrate equivalent of inverse transposition and also containing four copies of IS1. Cointegrates of the type II and III dissociate efficiently in the rec+ cells but, in contrast to the cointegrates mediated by the original transposon Tn9', are unable to dissociate efficiently in the recA- cells. It was concluded that a DNA segment in the central region of Tn9' may be essential for the expression of the IS1-specific resolvase encoded by the right copy of IS1.     

Structural instability of co-integrates formed during interaction of plasmid R57 with pB322 and RP1. Possible role of IS1 element in the degradation of co-integrates

The conjugative plasmid R57 determines resistance to ampicillin and chloramphenicol. Earlier it was shown that R57 encodes site-specific recA-independent recombinase, which acts in cis and resolves IS1-mediated cointegrates arising in the Escherichia coli recA cells between R57 and pBR322. In the present work the properties of the cointegrates between R57 and pBR322 or RP1 arising in the E. coli rec+ strains were studied. It was found that the cointegrates between R57 and pBR322, obtained by mating of the respective biplasmid donors of E. coli rec+ and the rec+ recipients, lost as a result of deletion a large DNA segment of R57 containing determinant Cmr. The resulting hybrid replicons preserved determinants Apr and Tcr of pBR322 and the R57 conjugative properties and were structurally identical. By using plasmid RP1ts12, which is temperature-sensitive in replication, it was demonstrated that in cells rec+ the cointegrates between R57 and RP1 are extremely unstable. On storage they undergo structural degradation mainly affecting the RP1 replicon. The degradation products of the hydrid complex had lost their RP1 genes but preserved the R57 functional determinants. For elucidation of the observed phenomena the properties of the IS1-mediated cointegrates between pBR322:Tn9 and plasmid pBR3.1--deletion derivative of RP1 were studied. It was found that insertion of IS1 sometimes resulted in formation of unstable cointegrates capable of resolving and loosing determinant Cmr with a high frequency. It was suggested that IS1 encodes the site-specific recombinase responsible for resolution of the IS1-mediated cointegrates and deletion generation. Expression of this recombinase appears to be dependent on structure of the insertion sites. The possible role of IS1 and recombinase encoded by it in resolution and structural instability of the cointegrates between R57 and pBR322 or RP1 is discussed.     

Linker insertion mutagenesis based on IS21 transposition: isolation of an AMP-insensitive variant of catabolic ornithine carbamoyltransferase from Pseudomonas aeruginosa

The bacterial insertion sequence IS21 when repeated in tandem efficiently promotes non-replicative cointegrate formation in Escherichia coli. An IS21-IS21 junction region which had been engineered to contain unique SalI and BglII sites close to the IS21 termini was not affected in the ability to form cointegrates with target plasmids. Based on this finding, a novel procedure of random linker insertion mutagenesis was devised. Suicide plasmids containing the engineered junction region (pME5 and pME6) formed cointegrates with target plasmids in an E.coli host strain expressing the IS21 transposition proteins in trans. Cointegrates were resolved in vitro by restriction with SalI or BglII and ligation; thus, insertions of four or 11 codons, respectively, were created in the target DNA, practically at random. The cloned Pseudomonas aeruginosa arcB gene encoding catabolic ornithine carbamoyltransferase was used as a target. Of 20 different four-codon insertions in arcB, 11 inactivated the enzyme. Among the remaining nine insertion mutants which retained enzyme activity, three enzyme variants had reduced affinity for the substrate ornithine and one had lost recognition of the allosteric activator AMP. The linker insertions obtained illustrate the usefulness of the method in the analysis of structure-function relationships of proteins.     

Study of the role of the insA open reading frame in the IS1 insertion element structure during transposition and resolution of the IS1 mediated cointegrates

In order to elucidate the function of the IS1 insA gene derivatives of plasmid pUC19::Tn9' with insertions of synthetic oligonucleotides were obtained. The latter are equal or multiple of 9 b.p. in length and are located in the Pst1 site within each of the two IS1 copies of the Tn9' transposon. The insertions of the nine base oligonucleotides code for the neutral amino acids and do not shift the reading frame. One of the mutant transposon obtained - Tn9'/X was studied on the ability to form simple insertions and plasmid cointegrates. For this purpose the pUC19 derivatives carrying the wild type and mutant transposon were mobilized by conjugative plasmid pRP3.1. It was found that the damage of the insA gene does not influence the ability of transposon to form simple insertions and plasmid cointegrates in both recA - and rec+ cells of E. coli. However, the frequency of the cointegrate formation in the subsequent transposition of the mutant transposon from pRP3.1::Tn9'/X to pBR322 was by 10-20 times lower in comparison to the wild type transposon. Instable (dissociating) Tn9'/X-mediated plasmid cointegrates formed by interaction pUC19::Tn9'/X and pRP3.1 were obtained. It was shown that in the E. coli recA-cells such cointegrates dissociate, as a rule, "correctly", i.e. they segregate mainly plasmids of types pUC19::Tn9'/X and pUC19::IS1/X. The data obtained correspond with the notion that the gene insA product is not essential for transposition, but is, possibly, involved in the formation of the IS1-generated deletions.     

Analysis of IS21-mediated mobilization of plasmid pACYC184 by R68.45 in Escherichia coli

Escherichia coli plasmids like pACYC184 or pBR325 can be mobilized by the P-type plasmid R68.45, which carries a tandem duplication of insertion element IS21, at a frequency of 10^?3–10^?5 per donor cell. Analysis of exconjugant cells revealed that plasmid mobilization occurs via cointegrate formation involving transposition of IS21. No resolution of cointegrates of pACYC184 and the P-type plasmid could be found in recA recipient cells. In the cointegrate, the E. coli plasmid is flanked by single copies of IS21 in direct orientation. After resolution of the cointegrate in recA⁺ recipients, the mobilizing plasmid R68.45 lost one copy of IS21 becoming indistinguishable from plasmid R68. It was shown that during mobilization, insertion element IS21 transposes to the mobilized plasmid. Insertion sites and orientations of IS21 in 33 pACYC184::IS21 insertion mutants have been determined: IS21 was found to be integrated in plasmid pACYC184 in different regions but only in one orientation. The IS21 tandem structure of plasmid R68.45 and its role in the mobilization process is discussed.     

Mechanism of Is1 Transposition in E. COLI: Choice between Simple Insertion and Cointegration

Insertion element IS1 and IS1-based transposon Tn9 generate cointegrates (containing vector and target DNAs joined by duplicate copies of IS1 or Tn9) and simple insertions (containing IS1 or Tn9 detached from vector sequences). Based on studies of transposon Tn5 we had proposed a conservative (non-replicative) model for simple insertion. Others had proposed that all transposition is replicative, occurring in a rolling circle structure, and that the way DNA strands are joined when replication terminates determines whether a simple insertion or a cointegrate is formed.--We selected for the transposition of amp and cam resistance markers from pBR322::Tn9 plasmids to an F factor in recA-E. coli and identified products containing three and four copies of IS1, corresponding to true cointegrates (from monomeric plasmids), and simple insertions (from dimeric plasmids). The simple insertions with four copies of IS1 outnumbered those with three by a ratio of about 3:1, whereas true cointegrates containing three copies of IS1 were more numerous than those with four.--A straightforward rolling circle model had predicted that the simple insertions containing three copies of IS1 should be more frequent than those with four. Because we obtained the opposite result we propose that simple insertions only arise when the element fails to replicate or if replication starts but then terminates prematurely. The two classes of products, simple insertions and cointegrates, reflect alternative conservative and replicative fates, respectively, of an early intermediate in transposition.     

Dissociation of unstable cointegrate plasmids formed during transposition of IS1 element: the role of IS1 encoded recombinase

The properties of IS1/Tn9'-mediated cointegrates between plasmids pDK57 (pBR322:: :: Tn9') and pRP3.1--the deletion derivative of RP1 were investigated. It was found that IS1/Tn9'-mediated integration of pDK57 into the active transcribed regions of pRP3.1 (in particular kan and tet genes) leads to formation of unstable cointegrates capable of resolving in E. coli K-12 rec+ and recA cells. The structure of dissociation products of unstable cointegrates was studied. According to the data received in rec+ cells, the unstable cointegrates mainly produced plasmids pDK57 and pBR322::IS1--Cms-derivative of pDK57 as resolution products. In recA cells the cointegrates dissociate in different ways, and this process leads to the formation of not only pDK57 and pBR322::IS1, but also to the production of the deletion derivatives of these plasmids as well as to the derivatives of pDK57 and pBR322::IS1, containing duplications of IS1 or separate parts of Tn9'. It was concluded that the IS1-specific recombinase is involved in the dissociation (resolution) of unstable IS1/Tn9'-mediated cointegrates. This recombinase recognizes the sites localized in both inverted termini of IS1 as well as in the adjacent DNA segments. Hence, it is possible, that the IS1 recombinase is involved also in the generation of IS1-adjacent delations.     

Characterization of insertion sequence IS946, an Iso-ISS1 element, isolated from the conjugative lactococcal plasmid pTR2030.

The self-transmissible plasmid pTR2030 mobilized nonconjugative heterologous cloning vectors pGK12 (Cmr Emr) and pSA3 (Emr) at frequencies of 10(-5) to 10(-6) per input donor. Transconjugants harbored a 51- or 58-kilobase (kb) plasmid not found in the parental strains that cotransferred at high frequency with Cmr Emr and pTR2030-encoded phage resistance (Hsp+) in second-round matings (10(-1) per input donor). Restriction endonuclease mapping and DNA-DNA hybridization identified the 51- to 58-kb plasmids as pTR2030::vector cointegrates. Examination of four cointegrates indicated that pGK12 and pSA3 had inserted within two locations on pTR2030. Resolution of the cointegrates generated vector derivatives containing a 0.8-kb insert of pTR2030 DNA. Restriction analyses of several resolution plasmids indicated that the 0.8-kb element had inserted into various positions within pGK12 and pSA3 and in certain cases had inactivated the Cmr or Emr marker of pGK12. A conjugative mobilization assay demonstrated that the 0.8-kb element, designated IS946, mediated transpositional recombination. Nucleotide sequence determination identified IS946 as an 808-base-pair (bp) insertion sequence sharing ca. 96% homology with lactococcal insertion sequence ISS1. IS946 differed by 27 and 31 bp from ISS1S and ISS1T, respectively, and in 2 of 226 amino acids in the deduced sequence of the putative transposase. IS946 has perfect 18-bp terminal inverted repeats, identical to ISS1, and similarly generated 8-bp direct repeats of the target site upon insertion.