The Effect of Ag Nanoparticles on Surface-Enhanced Luminescence from Au Nanovoid Arrays

Studies comparing the effect of adding two different nanoparticle compositions on the plasmonic properties of Au nanovoid arrays were undertaken. Surface-enhanced resonance luminescence and surface-enhanced resonance Raman studies comparing dispersed Ag nanoparticles and Ag nanoparticle aggregates on gold nanovoid arrays were undertaken. These studies showed that using Ag nanoparticle aggregates increased both luminescence and Raman efficiency relative to when dispersed nanoparticles were used; in addition, these studies also showed that adding dispersed Ag nanoparticles supported a more reproducible enhancement in luminescence and Raman across the substrate compared to using Ag nanoparticle aggregates. Finite element analysis simulations indicated that surface plasmon polariton distribution in the sample was affected by the presence of the Ag nanoparticles on the Au nanovoid array.     

Near-Field-Induced Femtosecond Breakdown of Plasmonic Nanoparticles

Plasmonics - We studied the evolution of femtosecond breakdown in lithographically produced plasmonic nanoparticles with increasing laser intensity. Localized plasmons were generated with 40-fs...     

A Novel Plasmonic Nanolaser Based on Fano Resonances with Super Low Threshold

Plasmonics - A novel plasmonic nanolaser is proposed based on a heptamer of silver nanoparticles surrounded by gain material. Optical properties of the proposed laser are analyzed using the finite...     

Optimization of the Field Enhancement and Spectral Bandwidth of Single and Coupled Bimetal Core–Shell Nanoparticles for Few-Cycle Laser Applications

We have theoretically studied and optimized the field enhancement and temporal response of single and coupled bimetal Ag/Au core–shell nanoparticles (NPs) with a diameter of 160 nm and compared the results to pure Ag and Au NPs. Very high-field enhancements with an amplitude reaching 100 (with respect to the laser field centered at 800 nm) are found at the center of a 2-nm gap between Ag/Au core–shell dimers. We have explored the excitation of the bimetal core–shell particles by Fourier transform-limited few-cycle optical pulses and identified conditions for an ultrafast plasmonic decay on the order of the excitation pulse duration. The high-field enhancement and ultrafast decay makes bimetal core–shell particles interesting candidates for applications such as the generation of ultrashort extreme ultraviolet radiation pulses via nanoplasmonic field enhancement. Moreover, in first experimental studies, we synthesized small bimetal Ag/Au core–shell NPs and compared their optical response with pure Au and Ag NPs and numerical results.     

A novel cell transfection platform based on laser optoporation mediated by Au nanostar layers

The recently developed laser‐induced cell transfection mediated by Au nanoparticles is a promising alternative to the well‐established lipid‐based transfection or to electroporation. Optoporation is based on the laser plasmonic heating of nanoparticles located near the cell membrane. However, the uncontrollable cell damage from intense laser pulses and from random attachment of nanoparticles may be crucial for transfection. We present a novel plasmonic optoporation technique that uses Au nanostar layers immobilized in culture microplate wells. HeLa cells were grown directly on Au nanostar layers, after which they were subjected to continuous‐wave 808 nm laser irradiation. An Au monolayer density ~15 μg/cm² and an absorbed energy of about 15 to 30 J were found to be optimal for optoporation. Propidium iodide molecules were used as model penetrating agent. The transfection efficiency evaluated using fluorescence microscopy for HeLa cells transfected with pGFP under optimized optoporation conditions (95% ± 5%) was similar to the efficiency of TurboFect. The technique's efficiency (295 ± 10 relative light units, RLU), demonstrated by transfecting HeLa cells with the pCMV‐GLuc 2 control plasmid, was greater than that obtained by transfection of HeLa cells with the TurboFect agent (220 ± 10 RLU). The cell viability in plasmonic optoporation (92% ± 7%), too, was greater than that in transfection with TurboFect (75% ± 7%).      

金纳米微粒辅助细胞激光热作用疗法研究

金纳米微粒对可见光的强吸收特性使得光能可以高效地转换为热能.由于金纳米微粒的尺度在几十纳米范围,并且很容易与其他生物体结合,因此可以在局部范围进行激光选择性加热,这非常适合作为分子或细胞的靶向.采用这种金纳米微粒辅助激光热作用方法,对牛肠碱性磷酸酯酶(alkaline phosphatase aP)的选择性破坏,细胞膜的通透性提高以及对细胞的选择性灭活进行了试验并得到了很好的结果.此外,还讨论了用这种方法进行基因转染以及选择性光热治疗一些疾病的可能性.     

Surface Plasmon Tunability and Emission Sensitivity of Ultrasmall Fluorescent Copper Nanoclusters

Ultrasmall copper nanoparticles have been synthesized using copper(II) salt as precursor by hydrazine reduction in the presence of citric acid and cetyltrimethylammonium bromide facilitating the growth of stable copper nanoparticles with an average diameter of <2 nm. The corresponding surface plasmon resonances were monitored under variable microenvironments, and it is seen that these tiny copper nanoparticles form aggregates under stipulated reaction conditions. It is noted that ultrasmall copper nanoparticles do not exhibit any characteristic surface plasmon band in the visible region; rather, a continuous absorption is seen over the entire UV–vis region. However, a well-defined plasmon absorption band makes its appearance while the particles are aggregated in close-packed assembly. These results demonstrate that the maximum of surface plasmon resonance is red-shifted from that of isolated particles because of electromagnetic interaction between the particles. The aggregation process is manifested upon changes of pH, anionic surfactant, etc. and is not reversible, i.e., the aggregates could not be re-dispersed into ultrasmall particles. The effect of addition of electrolyte has been monitored to study the surface plasmon damping of the copper nanoparticles. The plasmonic sensitivity of the copper nanoparticle aggregates has been elicited by the determination of amino acid chain length with exquisite sensitivity because of enormous electromagnetic field at the junction of the particles in the aggregates. Interestingly, the as-synthesized ultrasmall copper nanoclusters exhibit excellent fluorescence properties with a narrow emission profile. The emission properties of these copper nanoclusters have been utilized as an indicator for selective and ultrasensitive detection of highly toxic Hg^II ions in water in the nanomolar detection limit.     

Terahertz Plasmonic Quantum Cascade Lasers: a Comprehensive Physics Study

Generation of terahertz (THz) radiation has been a hot research topic in recent years. Plasmonic quantum cascade lasers (QCLs) are among the most compact and efficient sources to generate THz radiation. In this paper, we comprehensively study plasmonic QCLs designed based on the antenna-feedback structure to generate efficient radiation about the center frequency of 3 THz. By changing the geometric structure of the plasmonic cavity and using two-dimensional simulation, a minimum loss less than 5.9 cm^?1 is achieved at the lasing frequency. It is also possible to control the orientation of the output beam either vertically or tilted by changing the geometry of the antenna design via chirped or non-chirped grating scheme. Moreover, the output characteristics of the QCL are simulated based on the three-level rate equations through which the dynamics of the laser, as well as the P-I curve, are investigated. Also, the gain spectra for two laser designs (with chirped and non-chirped gratings) are simulated and compared to each other. The results of this paper may provide deep insight into designing efficient laser sources in the THz region.

     

Enhanced photoinactivation of Staphylococcus aureus with nanocomposites containing plasmonic particles and hematoporphyrin

We fabricated composite nanoparticles consisting of a plasmonic core (gold nanorods or gold–silver nanocages) and a hematoporphyrin‐doped silica shell. The dual photodynamic and photothermal activities of such nanoparticles against Staphylococcus aureus 209 P were studied and compared with the activities of reference solutions (hematoporphyrin or silica‐coated plasmonic nanoparticles). Bacteria were incubated with nanocomposites or with the reference solutions for 15 min, which was followed by CW light irradiation with a few exposures of 5 to 30 min. To stimulate the photodynamic and photothermal activities of the nanocomposites, we used LEDs (405 and 625 nm) and a NIR laser (808 nm), respectively. We observed enhanced inactivation of S. aureus 209 P by nanocomposites in comparison with the reference solutions. By using fluorescence microscopy and spectroscopy, we explain the enhanced antimicrobial effect of hematoporphyrin‐doped nanocomposites by their selective accumulation in the vicinity of the bacteria. (© 2013 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Silver Nanoparticles in Epoxy Resin Deposited on Silicon Substrates for Light Trapping

Metallic silver nanoparticles were prepared in epoxy resin using N,N-dimethylformamide (DMF) as reducing agent of silver ions at room temperature. They were characterized by UV–Vis spectroscopy, atomic force microscopy (AFM), transmission electronic microscopy (TEM), and high-resolution transmission electronic microscopy (HRTEM). The silver nanoparticles showed broadband absorption spectra attributed to high-order plasmonic resonances. The morphology of the metallic particles corresponds to elongated particles and their aggregates with a size above 30 nm. These silver nanoparticles were deposited by the spin-coating process on crystalline silicon at room temperature. Then, the antireflective properties of these samples were measured. According to the observed results, it is inferred that the films of coalesced silver nanoparticles decrease the reflectance of crystalline silicon better than particles separated by large distances. These results are discussed in terms of forward scattering of large metallic nanoparticles where higher order multipolar modes are dominant and the retardation effects are very important.     

Plasmonic Circular Dichroism Study of DNA–Gold Nanoparticles Bioconjugates

Plasmonic circular dichroism (CD) responses of hybrid nanostructures containing noble metal nanoparticles and chiral molecules have received increasing interest with various applications in nanophotonics. Chiral biomolecules show strong CD signals typically found in the ultraviolet region, whereas, in the visible range, they produce a weak signal. Strengthening the CD signal in the visible region is of high importance, which could be achieved through fabrication of novel hybrid nanostructures. Herein, gold nanoparticles (GNPs) have been assembled via DNA linker to investigate the possibility of enhancing plasmonic CD signal in the visible range. DNA-linked assemblies with pre- and postannealed conditions were characterized by ultraviolet–visible spectroscopy, dynamic light scattering (DLS), and CD spectropolarimetry. In the presence of DNA linker with sticky ends, the aggregation phenomenon was traced by red shifts of surface plasmon resonance of nanoparticles. Time-dependent hybridization of single-stranded “sticky ends” with DNA-conjugated GNPs and increased probability of hydrogen bond formation lead to enhancement of CD signals in the ultraviolet region. Complexation of biomolecule and nanoparticle assemblies induced enhanced CD signals in the visible range, which was noticed both before and after purification. DLS characterization of the assemblies also confirmed the difference in the size of aggregates, which could be controlled by the linker molecules. This investigation encourages possibility of utilizing plasmonic CD technique as a tool for tracing fabricated nanostructure assemblies with enhanced characterization possibility.     

Plasmonic Optical Properties and Applications of Metal Nanostructures

In this review article, we provide an overview of recent research activities in the study of plasmonic optical properties of metal nanostructures with emphasis on understanding the relation between surface plasmon absorption and structure. Both experimental results and theoretical calculations have indicated that the plasmonic absorption strongly depends on the detailed structure of the nanomaterials. Examples discussed include spherical nanoparticles, nanorods, nanowires, hollow nanospheres, aggregates, and nanocages. Plasmon–phonon coupling measured from dynamic studies as a function of particle size, shape, and aggregation state is also reviewed. The fascinating optical properties of metal nanostructures find important applications in a number of technological areas including surface plasmon resonance, surface-enhanced Raman scattering, and photothermal imaging and therapy. Their novel optical properties and emerging applications are illustrated using specific examples from recent literature. The case of hollow nanosphere structures is highlighted to illustrate their unique features and advantages for some of these applications.     

Tailored Aggregate-Free Au Nanoparticle Decorations with Sharp Plasmonic Peaks on a U-Type Optical Fiber Sensor by Nanosecond Laser Irradiation

A novel experimental methodology is presented for fabricating U-shaped optical fiber probes decorated with aggregate-free Au nanoparticles exhibiting sharp localized surface plasmon resonance (LSPR) spectra. The U-type tip is coated with gold nanoparticles (AuNPs) using a simple and time-efficient dip-coating procedure, without initially taking any care to prevent the formation of nanoparticle aggregates in the coated area. In a second step, the coating was irradiated with a few tens of laser pulses of 5-ns duration at 532 nm with intensities in the range of 2–14 MW/cm², leading to the formation of aggregate-free LSPR optical fiber probes. The process was monitored and controlled in real time through the changes induced into the fiber’s extinction spectra by the laser irradiation, and the coated fibers were characterized by electron microscopy. The proposed methodology resulted into the fabrication of U-type optical fiber probes coated with AuNPs exhibiting a sharp plasmon peak, which is a perquisite for their application as sensing devices.     

Plasmonic Effects of Dual-Metal Nanoparticle Layers for High-Performance Quantum Dot Solar Cells

To improve quantum dot solar cell performance, it is crucial to make efficient use of the available incident sunlight to ensure that the absorption is maximized. The ability of metal nanoparticles to concentrate incident sunlight via plasmon resonance can enhance the overall absorption of photovoltaic cells due to the strong confinement that results from near-field coupling or far-field scattering plasmonic effects. Therefore, to simultaneously and synergistically utilize both plasmonic effects, the placement of different plasmonic nanostructures at the appropriate locations in the device structure is also critical. Here, we introduce two different plasmonic nanoparticles, Au and Ag, to a colloidal PbS quantum dot heterojunction at the top and bottom interface of the electrodes for further improvement of the absorption in the visible and near-infrared spectral regions. The Ag nanoparticles exhibit strong scattering whereas the Au nanoparticles exhibit an intense optical effect in the wavelength region where the absorption of light of the PbS quantum dot is strongest. It is found that these dual-plasmon layers provide significantly improved short-circuit current and power conversion efficiency without any form of trade-off in terms of the fill factor and open-circuit voltage, which may result from the indirect contact between the plasmonic nanoparticles and colloidal quantum dot films.

     

Plasmon Singularities from Metal Nanoparticles in Active Media: Influence of Particle Shape on the Gain Threshold

Localized surface plasmon singularities from metal nanoparticles in active media are investigated on the basis of classic linear electrodynamics. It is found that the gain threshold is inversely proportional to the shape factor of the particle. When relating this phenomenon to the plasmonic field-enhanced emission from gain units, we show that the maximum electric field around spheroidal particles impacts upon the gain threshold via a two-exponential decay function. Our results provide a way to reduce the gain requirement in metal nanoparticle-based spaser or random laser systems.     

Facile Synthesis of Tunable Nanostructured Plasmonic Templates by Electroless Deposition

In this work, we have developed plasmonic Ag nanoparticles supported on Si substrates via a simple electroless deposition process eliminating the need of vacuum technology. The near- and far-field plasmonic performance of the produced nanoparticles were evaluated by surface-enhanced Raman scattering (using Rhodamine 6G as test molecule) and specular spectral reflectivity measurements, respectively. The factors influencing the development of nanoparticles, such as the type (p- or n-) and the orientation ({100} or {111}) of the substrate, the deposition time, and the solution’s concentration, were studied thoroughly by optical measurements, x-ray diffraction, auger electron spectroscopy, and x-ray photoelectron spectroscopy. The deposition time, as well as the concentration, affected significantly the development and the growth rate of the particles making this technique an easy and inexpensive method for the development of tunable plasmonic nanoparticles. The produced plasmonic templates had improved signal-to-noise ratio by an order of magnitude for R6G compared to sputter-deposited Ag nanoparticles.     

Plasmonic Wood for High‐Efficiency Solar Steam Generation

Plasmonic metal nanoparticles are a category of plasmonic materials that can efficiently convert light into heat under illumination, which can be applied in the field of solar steam generation. Here, this study designs a novel type of plasmonic material, which is made by uniformly decorating fine metal nanoparticles into the 3D mesoporous matrix of natural wood (plasmonic wood). The plasmonic wood exhibits high light absorption ability (≈99%) over a broad wavelength range from 200 to 2500 nm due to the plasmonic effect of metal nanoparticles and the waveguide effect of microchannels in the wood matrix. The 3D mesoporous wood with numerous low‐tortuosity microchannels and nanochannels can transport water up from the bottom of the device effectively due to the capillary effect. As a result, the 3D aligned porous architecture can achieve a high solar conversion efficiency of 85% under ten‐sun illumination (10 kW m^?2). The plasmonic wood also exhibits superior stability for solar steam generation, without any degradation after being evaluated for 144 h. Its high conversion efficiency and excellent cycling stability demonstrate the potential of newly developed plasmonic wood to solar energy‐based water desalination.     

Broadening of Plasmonic Resonance Due to Electron Collisions with Nanoparticle Boundary: а Quantum Mechanical Consideration

We present a quantum mechanical approach to calculate broadening of plasmonic resonances in metallic nanostructures due to collisions of electrons with the surface of the structure. The approach is applicable if the characteristic size of the structure is much larger than the de Broglie electron wavelength in the metal. The approach can be used in studies of plasmonic properties of both single nanoparticles and arrays of nanoparticles. Energy conservation is insured by a self-consistent solution of Maxwell's equations and our model for the photon absorption at the metal boundaries. Consequences of the model are illustrated for the case of spheroid nanoparticles, and results are in good agreement with earlier theories. In particular, we show that the boundary-collision broadening of the plasmonic resonance in spheroid nanoparticles can depend strongly on the polarization of the impinging light.     

Intracellular Localized Surface Plasmonic Sensing for Subcellular Diagnosis

This paper proposes a method for diagnosing intracellular conditions and organelles of cells with localized surface plasmonic resonance (LSPR) by directly internalizing the gold nanoparticles (AuNPs) into the cells and measuring their plasmonic properties through hyperspectral imaging. This technique will be useful for direct diagnosis of cellular organelles, which have potential for cellular biology, proteomics, pharmaceuticals, drug discovery etc. Furthermore, localization and characterization of citrate-capped gold nanoparticles in HeLa cells were studied, by hyperspectral microscopy and other imaging techniques. Here, we present the method of internalizing the gold nanoparticles into the cells and subcellular organelles to facilitate subcellular plasmonic measurements. An advanced label-free visualization technique, namely hyperspectral microscopy providing images and spectral data simultaneously, was used to confirm the internalization of gold nanoparticles and to reveal their optical properties for possible intracellular plasmonic detection. Hyperspectral technology has proved to be effective in the analysis of the spectral profile of gold nanoparticles, internalized under different conditions. Using this relatively novel technique, it is possible to study the plasmonic properties of particles, localized in different parts of the cell. The position of the plasmon bands reflects the interactions of gold nanoparticles with different subcellular systems, including particle-nucleus interactions. Our results revealed the effect of the different intracellular interactions on the aggregation pattern of gold nanoparticles, inside the cells. This novel technique opens the door to intracellular plasmonics, an entirely new field, with important potential applications in life sciences. Similarly, the characterization of AuNP inside the cell was validated using traditional methods such as light microscopy and scanning electron microscopy. Under the conditions studied in this work, gold nanoparticles were found to be non-toxic to HeLa (cervical cancer) cells.     

Interaction of fibrinogen with magnetite nanoparticles

The interaction between fibrinogen and magnetite nanoparticles in solution has been studied by the methods of spin labeling, ferromagnetic resonance, dynamic and Rayleigh light scattering. It is shown that protein molecules adsorb on the surface of nanoparticles to form multilayer protein covers. The number of molecules adsorbed on one nanoparticle amounts to ∼65 and the thickness of the adsorption layer amounts to ∼27 nm. Separate nanoparticles with fibrinogen covers (clusters) form aggregates due to interactions of the end D domains of fibrinogen. Under the influence of direct magnetic field, nanoparticles with adsorbed proteins form linear aggregates parallel to the force lines. It is shown that the rate of protein coagulation during the formation of fibrin gel under the action of thrombin on fibrinogen decreases ∼2 times in the presence of magnetite nanoparticles, and the magnitude of the average fiber mass/length ratio grows.