Triangular Au�CAg Nanoframes with Tunable Surface Plasmon Resonance Signal from Visible to Near-Infrared Region

In recent years, metal hollow nanostructures are intriguing to be synthesized and studied because they exhibit unique surface plasmonic properties. Although many methods for tuning the surface plasmonic absorption peaks of silver nanostructures have been reported, it still remains a great challenge to produce hollow Ag nanostructure with controllable surface plasmon resonance (SPR) via a facile method. In this paper, triangular Au–Ag nanoframes were successfully fabricated using triangular silver nanoplates as templates, through galvanic replacement reaction between the silver nanoplates and HAuCl₄, exhibiting tuneable SPR response from visible (605 nm) to near-infrared region (1,235 nm).     

The Tunable and Well-Controlled Surface Plasmon Resonances of Au Hollow Nanostructures by a Chemical Route

Au plasmonic hollow spherical nanostructures were synthesized by electrochemical reduction (GRR, the Galvanic Replacement Reaction) using Ag nanoparticles as templates. From UV-visible absorption spectroscopy, it was found that the surface plasmon resonance (SPR) of gold hollow spherical nanostructures first showed red shift and then blue shift. However, further addition of gold precursor (HAuCl₄) resulted into a red shift of SPR peak. The morphological changes from Ag nanoparticles to Au hollow nanostructures were assessed by transmission electron microscopy (TEM) and energy dispersive X-ray spectroscopy (EDX)analysis. The Mie Scattering theory based simulations of SPR of Au hollow nanostructures were performed which are in good agreement with the experimental observations. Based on the experimental observations and theoretical calculations, a complete growth mechanism for Au hollow nanostructures is proposed.     

Novel polyhedral gold nanoparticles: green synthesis,optimization and characterization by environmental isolate of Acinetobacter sp. SW30

Gold nanoparticles have enormous applications in cancer treatment, drug delivery and nanobiosensor due to their biocompatibility. Biological route of synthesis of metal nanoparticles are cost effective and eco-friendly. Acinetobacter sp. SW 30 isolated from activated sewage sludge produced cell bound as well as intracellular gold nanoparticles when challenged with HAuCl₄ salt solution. We first time report the optimization of various physiological parameters such as age of culture, cell density and physicochemical parameters viz HAuCl₄ concentration, temperature and pH which influence the synthesis of gold nanoparticles. Gold nanoparticles thus produced were characterized by various analytical techniques viz. UV–Visible spectroscopy, X-ray diffraction, cyclic voltammetry, transmission electron microscopy, selected area electron diffraction, high resolution transmission electron microscopy, environmental scanning electron microscopy, energy dispersive X-ray spectroscopy, atomic force microscopy and dynamic light scattering. Polyhedral gold nanoparticles of size 20 ± 10 nm were synthesized by 24 h grown culture of cell density 2.4 × 10⁹ cfu/ml at 50 °C and pH 9 in 0.5 mM HAuCl₄. It was found that most of the gold nanoparticles were released into solution from bacterial cell surface of Acinetobacter sp. at pH 9 and 50 °C.     

Biosynthesis of fluorescent gold nanoparticles using an edible freshwater red alga,Lemanea fluviatilis (L.) C.Ag. and antioxidant activity of biomatrix loaded nanoparticles

Biosynthesis of gold nanoparticles has been accomplished via reduction of an aqueous chloroauric acid solution with the dried biomass of an edible freshwater epilithic red alga, Lemanea fluviatilis (L.) C.Ag., as both reductant and stabilizer. The synthesized nanoparticles were characterized by UV–visible, powder X-ray diffraction (XRD), transmission electron microscopy (TEM), Fourier transform infrared (FT-IR), and dynamic light scattering (DLS) studies. The UV–visible spectrum of the synthesized gold nanoparticles showed the surface plasmon resonance (SPR) at around 530 nm. The powder XRD pattern furnished evidence for the formation of face-centered cubic structure of gold having average crystallite size 5.9 nm. The TEM images showed the nanoparticles to be polydispersed, nearly spherical in shape and have sizes in the range 5–15 nm. The photoluminescence spectrum of the gold nanoparticles excited at 300 nm showed blue emission at around 440 nm. Gold nanoparticles loaded within the biomatrix studied using a modified 2,2-diphenyl-1-picrylhydrazyl (DPPH) method exhibited pronounced antioxidant activity.     

Synthesis of silver nanoparticles using haloarchaeal isolate Halococcus salifodinae BK3

Numerous bacteria, fungi, yeasts and viruses have been exploited for biosynthesis of highly structured metal sulfide and metallic nanoparticles. Haloarchaea (salt-loving archaea) of the third domain of life Archaea, on the other hand have not yet been explored for nanoparticle synthesis. In this study, we report the intracellular synthesis of stable, mostly spherical silver nanoparticles (AgNPs) by the haloarchaeal isolate Halococcus salifodinae BK₃. The culture on adaptation to silver nitrate exhibited growth kinetics similar to that of the control. NADH-dependent nitrate reductase was involved in silver tolerance, reduction, synthesis of AgNPs, and exhibited metal-dependent increase in enzyme activity. The AgNPs preparation was characterized using UV–visible spectroscopy, XRD, TEM and EDAX. The XRD analysis of the nanoparticles showed the characteristic Bragg peaks of face-centered cubic silver with crystallite domain size of 22 and 12 nm for AgNPs synthesized in NTYE and halophilic nitrate broth (HNB), respectively. The average particle size obtained from TEM analysis was 50.3 and 12 nm for AgNPs synthesized in NTYE and HNB, respectively. This is the first report on the synthesis of silver nanoparticles by haloarchaea.     

Antibacterial activity of silver nanoparticle-coated fabric and leather against odor and skin infection causing bacteria

We present a simple, eco-friendly synthesis of silver and gold nanoparticles using a natural polymer pine gum solution as the reducing and capping agent. The pine gum solution was combined with silver nitrate (AgNO₃) or a chloroauric acid (HAuCl₄) solution to produce silver nanoparticles (AgNPs) and gold nanoparticles (AuNPs), respectively. The reaction process was simple; formation of the nanoparticles was achieved by autoclaving the silver and gold ions with the pine gum. UV–Vis spectra showed surface plasmon resonance (SPR) for silver and gold nanoparticles at 432 and 539 nm, respectively. The elemental forms of AgNPs and AuNPs were confirmed by energy-dispersive X-ray spectroscopy (EDX). Fourier transform infrared spectroscopy (FTIR) showed the biomolecules present in the pine gum, AgNPs, and AuNPs. Transmission electron microscopy (TEM) images showed the shape and size of AgNPs and AuNPs. The crystalline nature of synthesized AgNPs and AuNPs was confirmed by X-ray crystallography [X-ray diffraction (XRD)]. Application of synthesized AgNPs onto cotton fabrics and leather, in order to evaluate their antibacterial properties against odor- or skin infection-causing bacteria, is also discussed. Among the four tested bacteria, AgNP-coated cotton fabric and leather samples displayed excellent antibacterial activity against Brevibacterium linens.     

Search of Extremely Sensitive Near-Infrared Plasmonic Interfaces: A Theoretical Study

The sensitivity of the wavelength position of localized surface plasmon resonance (LSPR) in metal nanostructures to local changes in the refractive index has been widely used for label-free detection strategies. Tuning the optical properties of the nanostructures from the visible to the infrared region is expected to have a drastic effect on the refractive index sensitivity. Here, we theoretically investigate the optical response of a newly designed plasmonic interface to changes in the bulk refractive index by the finite difference time domain method. It consists of a structured interface, where the planar interface is superposed with dielectric pillars 30 nm in height and 125 nm in length with a separation distance of 15 nm. The pillars are covered with U-shaped gold nanostructures of 50 nm in height, 125 nm in length, and 5 nm of gold base thickness. The whole structure is finally covered with a 5-nm thick dielectric layer of n ₂?=?2.63. This plasmonic structure shows bulk refractive index sensitivities up to 1750 nm/RIU (RIU : refractive index unit) in the near infrared (λ?=?2621 nm). The enhanced sensitivity is a consequence of the extremely enhanced electrical field between the gold nanopillars of the plasmonic interface.     

Plasmonic Au-MoO<Subscript>3</Subscript> Colloidal Nanoparticles by Reduction of HAuCl<Subscript>4</Subscript> by Blue MoO<Subscript>x</Subscript> Nanosheets and Observation of the Gasochromic Property

Defective colloids of blue MoO_x nanosheets were prepared by anodizing exfoliation method in water. This colloidal solution exhibits an optical plasmonic absorption band in the infrared region at about 760 nm. Merely mixing HAuCl₄ solution with the MoO_x leads to loss of the blue color, decaying of 760 nm plasmonic peak and simultaneous formation of the gold plasmon absorption peak at 550–570 nm. Some spectral variations in gold plasmonic peak and MoO_x optical band gap were observed for Mo:Au ratio of 10:1, 20:1, 30:1, and 40:1. The size of the gold nanoparticles was in the 5–6 nm range with fcc crystalline structure. X-ray photoelectron spectroscopy (XPS) revealed that the initial solution contains Mo⁵⁺ states and hydroxyl groups, which after reduction, hydroxyl groups are eliminated and the Mo⁵⁺ states converted to Mo⁶⁺. The obtained Au-MoO₃ colloids have a gasochromic property in which they are colored back to blue in the presence of hydrogen gas and the molybdenum oxide absorption peak recovered again. Furthermore, it was observed that both gold and Mo oxide plasmonic peaks redshift by insertion of hydrogen gas which is attributed to change in solution refractive index and formation of defect concentration.     

Preparation of Ag/Au bimetallic nanostructures and their application in surface‐enhanced fluorescence

An effective substrate for surface‐enhanced fluorescence, which consists of cluster Ag/Au bimetallic nanostructures on a copper surface, was synthesized via a multi‐stage galvanic replacement reaction of a Ag cluster in a chlorauric acid (HAuCl₄) solution at room temperature. The fabricated silver/gold bimetallic cluster were found to yield large surface‐enhanced fluorescence (SEF) enhancement factors for rhodamine 6G probe molecules deposited on the substrate, and also the fluorescence efficiency is critically dependent on the period of nanostructure growth. With the help of proper control reaction conditions, such as the reaction time, and concentration of reaction solutions, the maximum fluorescence enhanced effect was obtained. Therefore, the bimetallic nanostructure substrate also can be adapted to studies in SEF, which will expand the application of SEF. Copyright © 2015 John Wiley & Sons, Ltd.     

Plasmonic and Energy Studies of Ag Nanoparticles in Silica-Titania Hosts

The present work reports an investigation of surface plasmon resonance (SPR) of silver nanoparticles in SiO₂–TiO₂ hosts. The surface plasmon resonance of silver nanoparticles was observed in the wavelength range 300–400 nm. Numerical calculation of SPR of silver nanoparticles with spherical morphology was done on the basis of discrete dipole approximation (DDA) method. The observed fluorescence spectrum fits well with the theoretically calculated one. The luminescence enhancement is attributed to the strong local electric field which increases the exciting and emitting photons coupled to SPR. An effort has been made to study the surface plasmon mediated excitation energy transfer (EET) between two spherical metal nanoparticles. The van der Waals (vdW) energy between plasmonic silver nanoparticles in the present hosts has been estimated.     

Solid and Hollow Gold Nanostructures for Nanomedicine: Comparison of Photothermal Properties

The photothermal properties of solid and hollow gold nanostructures represented by colloidal solutions of spherical nanoparticles, nanoshells, and nanocages upon irradiation with a 100 mW 808 nm continuous-wave laser for the first time were experimentally compared under identical optical density and nanoparticle concentration conditions. Accompanying computer modeling of light absorption by the studied gold nanostructures revealed the general parameters influencing the photothermal efficiency, which is of significance for nanomedical applications. The spectral position of localized plasmonic excitations of the studied nanostructures ranged from 518 nm for solid gold nanoparticles to 718 nm for gold nanocages, which provided a possibility to observe a direct influence of the wavelength proximity between the localized surface plasmon resonance and laser line on the heat generation capability of the nanostructures. As a result, the best photothermal efficiency was registered for gold nanocages, which proves them as an efficient photothermal treatment agent and a possible candidate to build a nanocarrier platform for drug delivery with a controlled release. Light absorption modeling demonstrated an existence of optimal wall thickness for gold nanoshells that should lead to the maximum photothermal efficiency when irradiated with 808 nm light, which varied from about 0.1 to 0.4 in units of external nanoshell radius with an increase of the wall porosity. Additionally, computer modeling results show that increased wall porosity should lead to enhanced photothermal efficiency of polydisperse colloidal solutions of hollow gold nanostructures.     

Green synthesis of silver and gold nanoparticles using Zingiber officinale root extract and antibacterial activity of silver nanoparticles against food pathogens

In the present study, we synthesized silver and gold nanoparticles with a particle size of 10–20 nm, using Zingiber officinale root extract as a reducing and capping agent. Chloroauric acid (HAuCl₄) and silver nitrate (AgNO₃) were mixed with Z. officinale root extract for the production of silver (AgNPs) and gold nanoparticles (AuNPs). The surface plasmon absorbance spectra of AgNPs and AuNPs were observed at 436–531 nm, respectively. Optimum nanoparticle production was achieved at pH 8 and 9, 1 mM metal ion, a reaction temperature 50 °C and reaction time of 150–180 min for AgNPs and AuNPs, respectively. An energy-dispersive X-ray spectroscopy (SEM–EDS) study provides proof for the purity of AgNPs and AuNPs. Transmission electron microscopy images show the diameter of well-dispersed AgNPs (10–20 nm) and AuNPs (5–20 nm). The nanocrystalline phase of Ag and Au with FCC crystal structures have been confirmed by X-ray diffraction analysis. Fourier transform infrared spectroscopy analysis shows the respective peaks for the potential biomolecules in the ginger rhizome extract, which are responsible for the reduction in metal ions and synthesized AgNPs and AuNPs. In addition, the synthesized AgNPs showed a moderate antibacterial activity against bacterial food pathogens.     

Biosynthesis of extracellular and intracellular gold nanoparticles by Aspergillus fumigatus and A. flavus

Green chemistry is a boon for the development of safe, stable and ecofriendly nanostructures using biological tools. The present study was carried out to explore the potential of selected fungal strains for biosynthesis of intra- and extracellular gold nanostructures. Out of the seven cultures, two fungal strains (SBS-3 and SBS-7) were selected on the basis of development of dark pink colour in cell free supernatant and fungal beads, respectively indicative of extra- and intracellular gold nanoparticles production. Both biomass associated and cell free gold nanoparticles were characterized using X-ray diffractogram (XRD) analysis and transmission electron microscopy (TEM). XRD analysis confirmed crystalline, face-centered cubic lattice of metallic gold nanoparticles along with average crystallite size. A marginal difference in average crystallite size of extracellular (17.76 nm) and intracellular (26 and 22 nm) Au-nanostructures was observed using Scherrer equation. In TEM, a variety of shapes (triangles, spherical, hexagonal) were observed in both extra- and intracellular nanoparticles. 18S rRNA gene sequence analysis by multiple sequence alignment (BLAST) indicated 99 % homology of SBS-3 to Aspergillus fumigatus with 99 % alignment coverage and 98 % homology of SBS-7 to Aspergillus flavus with 98 % alignment coverage respectively. Native-PAGE and activity staining further confirmed enzyme linked synthesis of gold nanoparticles.     

Dopamine-Induced Growth of Au and Ag Nanoparticles on ITO Substrate and Their Application in PCPDTBT-Based Polymer Solar Cell

The direct attachment and growth of gold or silver nanoparticles (NPs) on indium tin oxide (ITO) surfaces was demonstrated using a simple and inexpensive successive ionic layer adsorption and reaction (SILAR) method by chemical reduction of the precursor metal salts with dopamine aqueous solution. Ag NPs on ITO substrate were approximately spherical with an average particle size of about 57 nm, but had a wide particle size distribution. Compared with Ag NPs, under the same 10 SILAR cycles, Au NPs have higher density packing and smaller average particle size of about 36 nm. XRD characterization and surface chemistry analysis confirmed the formation of Ag and Au NPs on ITO substrate with small amounts of dopamine-quinone adsorbed on the surface of them. Although Au NPs showed characteristic plasmon absorption, this did not result in performance enhancement in solar cell with the structure of ITO/ZnO/PCPDTBT:[6,6]-phenyl C₇₁/MoO₃/Ag because of the energy level mismatch between ZnO and dopamine molecules adsorbed on the surface of metal NPs.     

A Study of Metal@Graphene Core–Shell Spherical Nano-Geometry to Enhance the SPR Tunability: Influence of Graphene Monolayer Shell Thickness

Graphene, new generation advance material of two dimensional hexagonal lattice having extraordinary optical signatures, is used as coating material to enhance the surface plasmon resonance (SPR) effect of core@shell metal nanospheres. In a core@shell nanosphere, we have chosen metal as a core and graphene monolayer (GML) as a shell. We have analysed optical signature of coated and non-coated nanospheres in terms of extinction efficiency (Q _ext) and tunabilty of surface plasmon resonances using electrostatic model, where particle size is much smaller than the wavelength of incident light. We analysed this model over different metals (silver, gold and aluminium) core, coated with different thickness of GML (d?=?0.1 to 0.5 nm). These core@shell nanospheres are embedded in refractive index media of air (n _em?=?1), SiO₂ (n _em?=?1.47) and TiO₂ (n _em?=?2.79). The Q _ext has been calculated by varying both the core radii as well as the GML shell thickness. Graphene-coated metal nanosphere exhibits SPRs that have wide range tunability from 300 to 1500 nm. In the presenting work, we also analysed that extinction efficiency for metal@GML is higher in TiO₂ than others. The optimum value of GML shell thickness is 0.4 nm for TiO₂, the magnitude of extinction efficiency is maximum for the optimum thickness. The tunability of these plasmonic resonances is highly dependent on the core@shell material, thickness of Graphene shell and surrounding environment while non-coated metal nano-spheres do not show appropriate SPR tunability.     

Speckled SiO2@Au Core–Shell Particles as Surface Enhanced Raman Scattering Probes

Silica particles of ~800 nm size were functionalized using 3-amino propyl triethoxysilane molecules on which gold particles (~20 nm size) were deposited. The resulting particles appeared to form speckled SiO₂@Au core–shell particles. The surface roughness, along with hot spots, due to nanogaps between the gold nanoparticles was responsible for the enhancement of the Raman signal of crystal violet molecules by ~3.2?×?10⁷ and by ~1.42?×?10⁸ of single-wall carbon nanotubes. It has also been observed that the electromagnetic excitation near surface plasmon resonance (SPR) of core–shell particles is more effective than off resonance SPR excitation.     

Comparison of Gold and Silver/Gold Bimetallic Surface for Highly Sensitive Near-infrared SPR Sensor at 1550 nm

A large majority of surface plasmon resonance (SPR) sensors reported in the literature are designed to operate in the visible electromagnetic spectrum. However, the near-infrared, particularly at the telecommunications wavelength of 1550 nm, is also especially attractive for SPR sensing applications. In fact, SPR sensors operating in this region benefit from narrower resonance and deeper field penetration. In this paper, we report a theoretical and experimental study of an SPR sensor operating at a fixed wavelength of 1550 nm. The influence of the choice of metals and the interrogation methods on the sensitivity of the resulting SPR sensor is investigated. Two types of sensor chips (simple gold (Au) and bimetallic silver/Au structure) and three interrogation methods (monitoring of the position of the reflectivity minimum, the position of the centroid, and the intensity evolution of the reflectivity) are examined. We show that a refractive index resolution of 2.7?×?10^?6 refractive index unit can be easily obtained, and with further optimization of the measurement system, the ultimate limit of detection is expected to be even lowered. Therefore, the approach discussed here already shows a promising potential for highly sensitive SPR sensors.     

Solvent-Induced Morphological Changes of Polyhedral Silver Nanoparticles in Epoxy Resin

The use of just one material as reducing and capping agent during the synthesis of noble metal nanoparticles is of great interest for potential applications. This paper reports a simple method to prepare polyhedral silver nanoparticles at 80 °C using an epoxy resin (Araldite 506) as both reducing and capping agent. The formation of metal nanoparticles was investigated by Fourier-transform infrared spectroscopy, atomic force microscopy, transmission electronic microscopy, high-resolution transmission electronic microscopy and UV-vis spectroscopy. The proposed mechanism for the reduction of silver ions involves radicals as precursors of ketones and other products originated by thermo-oxidation of the resin. The nucleation of small spherical and polyhedral seeds (～7 nm) of polycrystalline silver and twin planes lead to big polyhedral silver nanoparticles of average size, 68 nm. On the other hand, the polyhedral silver nanoparticles dispersed in toluene changed to prolate-like particles, and their dispersion in dimethyl-sulphoxide and formamide originated elongated polyhedrons and concave nanostructures, respectively. These structural changes lead to unusual solvent-induced optical properties. For instance, the polyhedral nanoparticles dispersed in toluene red-shifted their surface plasmon resonance from 425 to 540 nm, in dimethyl-sulphoxide the spectrum exhibited a peak at 418 nm and a shoulder at 520 nm, and for the silver nanoparticles in formamide a broad band with maximum peak at 420 nm was observed. It is showed that the solvent/resin system works itself as structure-directing agent of silver nanoparticles. These results open the doors to achieve silver nanostructures highly sensitive to the dielectric environment, an ideal condition for applications in colorimetric sensors of molecules of biological or chemical interest.     

Mycogenesis of gold nanoparticles using a phytopathogen <Emphasis Type="Italic">Alternaria alternata</Emphasis>

The development of an eco-friendly and reliable process for the synthesis of gold nanomaterials (AuNPs) using microorganisms is gaining importance in the field of nanotechnology. In the present study, AuNPs have been synthesized by bio-reduction of chloroauric acid (HAuCl₄) using the fungal culture filtrate (FCF) of Alternaria alternata. The synthesis of the AuNPs was monitored by UV–visible spectroscopy. The particles thereby obtained were characterized by UV, dynamic light scattering (DLS), X-ray diffraction (XRD), energy dispersive X-ray (EDX) analysis, Fourier transform infrared (FTIR) spectroscopy, atomic force microscopy (AFM) and transmission electron microscopy (TEM). Energy-dispersive X-ray study revealed the presence of gold in the nanoparticles. Fourier transform infrared spectroscopy confirmed the presence of a protein shell outside the nanoparticles which in turn also support their stabilization. Treatment of the fungal culture filtrate with aqueous Au⁺ ions produced AuNPs with an average particle size of 12 ± 5 nm. This proposed mechanistic principal might serve as a set of design rule for the synthesis of nanostructures with desired architecture and can be amenable for the large scale commercial production and technical applications.     

Numerical Simulation of Broadband Scattering by Coated and Noncoated Metal Nanostructures Using Discrete Dipole Approximation Method

We suggest numerical method to study the optical response of metal nanostructures. The analysis of optical properties such as scattering and absorption by coated and noncoated nanogeometry has been done using discrete dipole approximation (DDA) method. The core-shell nanogeometry supports surface plasmon resonances, which are highly tunable from 400 to 1100 nm. The tunability of surface plasmon resonance (SPR) highly depends on the structural anisotropy and chosen core-shell material. Further, we have observed that aspect ratio is one of the key parameter to decide the nature and position of the plasmonic peaks and magnitude of optical cross section. We have also shown that coated nanospheroid is a more appropriate geometry as compared to coated nanosphere and noncoated nanospheroid in terms of wide tunability of surface plasmon resonance. The wide tunability in SPR is observed for the effective radii 90 nm core-shell (Au@SiO₂) nanospheroid with aspect ratio 0.1.