Generation of Multiple Fano Resonances in Plasmonic Split Nanoring Dimer

We present a computational study of the plasmonic response of a split nanoring dimer resonator which supports multiple plasmonic Fano-like resonances that arises by the coupling and interference of the dimer plasmon modes. For the generation of Fano resonances with large modulation depths, numerous configurations of the dimer resonator are analyzed which are observed to be highly dependent on the polarization of incident light. Moreover, the influence of dimension of the split nanoring structure on the spectral positions and intensities of the higher order Fano resonances are also investigated, and it is found that the asymmetric Fano line shapes can be flexibly tuned in the spectrum by varying various geometrical parameters. Such Fano resonators are also discovered to offer high values of figure of merit and contrast ratio due to which they are suitable for high-performance biological sensors.     

Photothermal Enhancement in Core-Shell Structured Plasmonic Nanoparticles

Plasmonic nanoparticles (NPs) with photothermal effects can be exploited as efficient heat sources in various applications. Here, the photothermal properties in core-shell structured plasmonic NPs, including metal/silica NP, silica/metal NP, and metal/silica/metal NP, are investigated. Compared with bare metal NPs, the core-shell plasmonic NPs not only exhibit extremely agile tunability in the surface plasmon resonances but also show considerably enhanced photothermal effects in terms of the maximum temperature rise. For metal/silica NPs and metal/silica/metal NPs, the SiO₂ shells function as effective thermal-protective layers for enhanced photothermal effect. For silica/metal NPs, the SiO₂ core and the metal shell show uniform temperature rise. These findings are essential for applying the core-shell structured plasmonic NPs on photothermal imaging, nanofluidics, etc.     

Plasmonic Wood for High‐Efficiency Solar Steam Generation

Plasmonic metal nanoparticles are a category of plasmonic materials that can efficiently convert light into heat under illumination, which can be applied in the field of solar steam generation. Here, this study designs a novel type of plasmonic material, which is made by uniformly decorating fine metal nanoparticles into the 3D mesoporous matrix of natural wood (plasmonic wood). The plasmonic wood exhibits high light absorption ability (≈99%) over a broad wavelength range from 200 to 2500 nm due to the plasmonic effect of metal nanoparticles and the waveguide effect of microchannels in the wood matrix. The 3D mesoporous wood with numerous low‐tortuosity microchannels and nanochannels can transport water up from the bottom of the device effectively due to the capillary effect. As a result, the 3D aligned porous architecture can achieve a high solar conversion efficiency of 85% under ten‐sun illumination (10 kW m^?2). The plasmonic wood also exhibits superior stability for solar steam generation, without any degradation after being evaluated for 144 h. Its high conversion efficiency and excellent cycling stability demonstrate the potential of newly developed plasmonic wood to solar energy‐based water desalination.     

Plasmonic Effect of a Nanoshell Dimer with Different Gain Materials

Though the plasmonic property for a passive nanoparticle dimer has been studied widely, the performance of a nanoparticle dimer with gain material is still inexplicit to our knowledge. Therefore, in this paper, we focus on the plasmonic effect of a nanoshell dimer, with its core filled with different gain materials, under a polarized plane wave excitation using a three-dimensional finite difference time domain method. It is shown that the gain materials in the core of the nanoshell can compensate the intrinsic absorption of the metal shell, resulting in a local energy enhancement in the junction of the active nanoshell dimer. The physics is supported by the detailed energy distribution of the active nanoshell dimer in each geometry region. It is found that the plasmonic coupling between two active nanoshell particles is more compact than the case of passive ones. The influence of shell thickness on the interaction between two adjacent active nanoshells is also analyzed.     

Evaluating Plasmonic Transport in Current-carrying Silver Nanowires

Plasmonics is an emerging technology capable of simultaneously transporting a plasmonic signal and an electronic signal on the same information support^1,2,3. In this context, metal nanowires are especially desirable for realizing dense routing networks⁴. A prerequisite to operate such shared nanowire-based platform relies on our ability to electrically contact individual metal nanowires and efficiently excite surface plasmon polaritons⁵ in this information support. In this article, we describe a protocol to bring electrical terminals to chemically-synthesized silver nanowires⁶ randomly distributed on a glass substrate⁷. The positions of the nanowire ends with respect to predefined landmarks are precisely located using standard optical transmission microscopy before encapsulation in an electron-sensitive resist. Trenches representing the electrode layout are subsequently designed by electron-beam lithography. Metal electrodes are then fabricated by thermally evaporating a Cr/Au layer followed by a chemical lift-off. The contacted silver nanowires are finally transferred to a leakage radiation microscope for surface plasmon excitation and characterization^8,9. Surface plasmons are launched in the nanowires by focusing a near infrared laser beam on a diffraction-limited spot overlapping one nanowire extremity^5,9. For sufficiently large nanowires, the surface plasmon mode leaks into the glass substrate^9,10. This leakage radiation is readily detected, imaged, and analyzed in the different conjugate planes in leakage radiation microscopy^9,11. The electrical terminals do not affect the plasmon propagation. However, a current-induced morphological deterioration of the nanowire drastically degrades the flow of surface plasmons. The combination of surface plasmon leakage radiation microscopy with a simultaneous analysis of the nanowire electrical transport characteristics reveals the intrinsic limitations of such plasmonic circuitry.     

Plasmonic Interaction Between Silver Nano-Cubes and a Silver Ground Plane Studied by Surface-Enhanced Raman Scattering

The plasmonic interaction between silver nano-cubes and a silver ground plane with and without a dielectric spacer is studied for surface-enhanced Raman scattering (SERS) for rhodamine 6G (R6G) molecules absorbed onto the silver nano-cubes. Experimental results show that the composite substrates made from silver nano-cubes and the silver ground plane produce a stronger SERS signal than by the cubes alone, due to the plasmonic interaction between the cubes and the film. Numerical simulation is used to verify the plasmonic enhancement of the composite substrate and is consistent with the experimental results. The lowest concentration of R6G molecules which can be detected with the composite substrate is about 10⁻¹¹ M with our setup.     

Localized Plasmonic Photothermal Therapy as a Life-saving Treatment Paradigm for Hospitalized COVID-19 Patients

Plasmonics - Lung failure is the main reason for mortality in COVID-19 patients, caused by the severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). To date, no drug has been clinically...     

Ascertaining Plasmonic Hot Electrons Generation from Plasmon Decay in Hybrid Plasmonic Modes

Plasmonics - In the propagating process along metal surface, surface plasmon polaritons (SPPs) mainly decay into thermal loss or release into photons, while a part of them were converted into...     

Optimization on Plasmonic Lenses Based on Generation Efficiency of Surface Plasmon Polaritons at Metallic Nanoslit

The generation efficiency of surface plasmon polaritons at metallic nanoslit is theoretically analyzed, and a novel plasmonic lens with two semiannular nanoslits is proposed in this paper. Based on the analysis results, the focusing performance of the proposal is optimized with a maximum field intensity enhancement factor of 7.69 and the full width at half maximum is 132 nm (~0.2λ _i), far beyond theoretical diffraction limit. Meanwhile, some other classical plasmonic lenses are also optimized through improving generation efficiency of surface plasmon polaritons at nanoslit and the focusing performances are consequently greatly enhanced.     

Highly Sensitive Plasmonic Sensor Based on Fano Resonance from Silver Nanoparticle Heterodimer Array on a Thin Silver Film

We investigate the optical spectrum of a multilayer metallic slab using multiple-scattering formalism. A thin silver film is attached to a periodic array of heterodimers consisting of two vertically spaced silver nanoparticles of different radii. Depending on the radius of nanoparticles, heterodimer array presents a simple nanoscale geometry which gives rise to remarkable plasmonic properties of multipolar resonances. Due to the coherent interference of the localized nanoparticle plasmons (discrete mode) and surface plasmon polaritons of metallic film (continuous mode), the reflection spectrum represents a sharp asymmetric Fano resonance dip, which is strongly sensitive to the refractive index of the surrounding embedded dielectric host. The physical features contribute to a highly efficient plasmonic sensor for refractive index sensing with sensitivity of ～1.5?×?10^?3 RIU/nm.     

Enhancement of Second Harmonic Generation in Metal-Insulator-Metal Plasmonic Waveguides

Nonlinear effects such as second harmonic generation (SHG) are important for applications such as switching and wavelength conversion. In this study, the generation of second harmonic in metal-insulator-metal (MIM) plasmonic waveguides was investigated for both symmetric and asymmetric structures. This study considered two different structures as plasmonic waveguides for the generation of second harmonic, and analysis was performed using the finite-difference time-domain method. Besides, the structure has grating on both sides for more coupling between photons and plasmons. The wavelength duration of grating per unit length (number of grooves) was optimized to reach the highest second harmonic generation. To perform this optimization, the wavelength of operation (λ = 458 nm) was considered. It was shown that field enhancement in symmetric MIM waveguides can result in the enhancement of SHG magnitude when compared to literature values. Also, asymmetric devices result in more than two orders of magnitude enhancement in SHG, as compared to the symmetric structure. It has been shown that the electric field of the second harmonic depends on the thickness of the crystal (insulator). Hence, its thickness was optimized to achieve the highest electric field.     

Luminescence Enhancement and SERS by Self-Assembled Plasmonic Silver Nanostructures in Nanoporous Glasses

It was shown experimentally that the action of continuous electric field on nanoporous silicate glasses with interconnecting pores, containing silver nanoparticles, leads to the spatial redistribution of nanoparticles. The concentration of nanoparticles near the negative electrode increases and results in silver nano- and microdendrite structure growth. The main mechanisms of the described effects are the field emission of silver ions from silver nanoparticles near negative electrode, migration of silver ions in the external electric field to the negative electrode, reduction of silver ions by free electrons, and new silver nanoparticle formation. The experiments have shown that at the ends of microdendrites, local field enhancement appears, which results in luminescence enhancement and in SERS.

     

Investigation of Second Harmonic Generation in Asymmetric Metal-Insulator-Metal Plasmonic Waveguides

Plasmonics - In this study, the second harmonic generation in metal-insulator-metal (MIM) plasmonic waveguides was investigated for both symmetric and asymmetric structures. Nonlinear processes...     

Proposition and Numerical Analysis of a Plasmonic Sensing Structure of Metallo-Dielectric Grating and Silver Nano-slabs in a Metal-Insulator-Metal Configuration

Plasmonics - We propose and numerically investigate a near-infrared surface plasmon resonance-based refractive index sensor having in unison an extremely high sensitivity (1719 nm/RIU) and...     

Determination of the Surface Plasmon Polariton Extraction Efficiency from a Self-Assembled Plasmonic Crystal

Plasmonics - We experimentally measure and analytically describe the fluorescence enhancement obtained by depositing CdSe/CdS nanocrystals onto a gold plasmonic crystal, a two-dimensional grating...     

High Efficiency Tunable Graphene-Based Plasmonic Filter in the THz Frequency Range

Plasmonics - A tunable plasmonic filter waveguide with indium antimonide activated by graphene layer configuration is proposed and numerically investigated. We demonstrate that the proposed tunable...     

用差异显示反转录PCR银染技术研究植物基因表达的差异

通过调整差异显示反转录PCR(DDRT-PCR)中总RNA、锚定引物、随机引物、cDNA和dNTP等关键试剂的用量,优化了适用于银染检测的DDRT-PCR方法.PCR扩增产物经6%变性聚丙烯酰胺凝胶垂直电泳分离后,银染能检测到多而清晰的条带.泳道中的条带数最少为40个,最多达80个,平均为60个,条带大小分布在100～900 bp范围,灵敏度为5 pg/mm² .此方法操作简便快速,灵敏度高,重复性好.采用这个改良的方法,分析了拟南芥野生型和ast突变型基因表达的差异.从16 000个cDNA扩增产物条带中筛选出28个差异条带.二次PCR扩增后,进一步筛选出13个差异条带,其中7个是野生型特异表达的,6个是突变型特异表达的,为进一步认识ast突变表型的产生机制奠定了基础.     

Solar Absorber Gel: Localized Macro‐Nano Heat Channeling for Efficient Plasmonic Au Nanoflowers Photothermic Vaporization and Triboelectric Generation

Plasmonic nanoparticles with outstanding photothermal conversion efficiency are promising for solar vaporization. However, the high cost and the required intense light excitation of noble metals, hinder their practical application. Herein, an inexpensive 3D plasmonic solar absorber gel that embraces all the desirable optical, thermal, and wetting properties for efficient solar vaporization is reported. The broadband absorption and strong near‐field intertip enhancement of the sparsely dispersed gold nanoflowers contribute to efficient light‐to‐heat conversion, while the macro‐nano thermal insulative silica gel retains and channels the plasmonic heat directly to the water pathways contained within the porous gel. The plasmonic‐based solar absorber gel shows a vaporization efficiency of 85% under solar irradiation of 1 sun intensity (1 kW m^?2). Moreover, the porous gel framework exhibits high mechanical stability and antifouling properties, potentially useful for polluted/turbid water evaporation. Complementary water condensation‐induced triboelectricity can be harvested alongside fresh water condensate, granting simultaneous fresh water production and electricity generation functionalities. The facile sol‐gel synthesis at room temperature makes the solar absorber gel highly adaptable for practical large‐scale photothermal applications.