Modifying and Fine Controlling of Silver Nanoparticle Nucleation Sites and SERS Performance by Double Silicon Etching Process

Different forms of modified and well-controlled plasmonic silver nanoparticles (AgNPs) were synthesized by silver ion reduction process of porous silicon (PS). Fine control of PS surface morphology was accomplished by employing two etching processes: light-induced etching (LIE) and photo electrochemical etching (PECE). The idea was to prepare excellent and reproducible surface-enhanced Raman scattering (SERS) substrates with high enhancement performance. PS surface modification was employed to create efficient and nearly uniformly distributed AgNP hotspot regions with very high specific surface areas. Reproducibility deviation of no more than 5% and enhancement factor of 1.2 × 10¹⁴ were obtained by SERS measurements at very low, rhodamine 6G (R6G) dye, concentration 10^?15 M. The PS morphology SERS substrate was well discussed and analyzed using field emission scanning electron microscopy (FE-SEM), X-ray diffraction spectroscopy (XRD), and Raman measurements.     

Tunable Plasmonic Silver Nanodomes for Surface-Enhanced Raman Scattering

Surface-enhanced Raman scattering (SERS) is an emerging analytical method used in biological and non-biological structure characterization. Since the nanostructure plasmonic properties is a significant factor for SERS performance, nanostructure fabrication with tunable plasmonic properties are crucial in SERS studies. In this study, a novel method for fabrication of tunable plasmonic silver nanodomes (AgNDs) is presented. The convective-assembly method is preferred for the deposition of latex particles uniformly on a regular glass slide and used as a template for polydimethylsiloxane (PDMS) to prepare nanovoids on a PDMS surface. The obtained nanovoids on the PDMS are used as a mold for AgNDs fabrication. The nanovoids are filled with Ag deposition by the electrochemical method to obtain metallic AgNDs. Scanning electron microscopy (SEM) and atomic force microscopy (AFM) are used for characterization of the structural properties of all fabricated AgNDs. The optical properties of AgNDs are characterized with the evaluation of SERS activity of 4-aminothiphonel and rhodamine 6G. In addition to experimental characterizations, the finite difference time domain (FDTD) method is used for the theoretical plasmonic properties calculation of the AgNDs. The experimental and theoretical results show that the SERS performance of AgNDs is strongly dependent on the heights and diameters of the AgNDs.     

Tapered Fiber Probe Modified by Ag Nanoparticles for SERS Detection

A tapered optical fiber fabricated by a simple chemical etching method and modified with Ag nanoparticles (AgNPs) by chemical deposition was evaluated for surface-enhanced Raman scattering (SERS). The fiber probe was used for SERS measurements in both direct and remote scattering modes, yielding desired performance in both scattering configurations. The state of the obtained AgNPs made a significant contribution to the high sensitivity of SERS to Rhodamine 6G (R6G) molecules (down to a concentration of 10^?7 M), and the substrate had an analyst enhancement factor (AEF) on the order of ～10⁸. Meanwhile, the SERS intensity during the evaporation process was investigated, showing a good stability at the later stage of the evaporation process. The fiber SERS probes demonstrated good reproducibility with the average relative standard deviation (RSD) values being less than 0.2 for the major Raman peaks.     

Ag-Cu Nanoparticles Encaptured by Graphene with Magnetron Sputtering and CVD for Surface-Enhanced Raman Scattering

An efficient surface-enhanced Raman scattering (SERS) substrate has been developed based on Ag-Cu nanoparticle-decorated graphene. The Ag-Cu-graphene (Ag-Cu@G) hybrid structure was prepared by magnetron sputtering for Ag and Cu film and chemical vapor deposition (CVD) for graphene, which avoided defects produced by graphene transferring process. The hybrid materials were confirmed by scanning electron microscopy (SEM), atomic force microscopy (AFM), energy dispersive spectroscopy (EDS), and Raman spectroscopy. With R6G as analyst molecule, the enhancement factor (EF) of the order of 10⁶ for Ag-Cu@G sample was obtained. Meanwhile, the substrates had stable enhanced SERS signals after 78-day exposure in air, which could be explained by the fact that the graphene is efficient at maintaining chemical and optical stability. The formation of graphene can contribute a stabilization and fluorescence quenching effect. Moreover, the electromagnetic distribution based on AFM images was simulated by finite difference time domain (FDTD) method.     

A Rapid Surface-Enhanced Raman Scattering Method for the Determination of Trace Hg2+ Using Rhodamine 6G-Aggregated Nanosilver as Probe

In pH 6.0 Na₂HPO₄-NaH₂PO₄ buffer solution and in the presence of cetyltrimethyl ammonium bromide, nanosilver particles were aggregated to a stable suspension. Therein, rhodamine 6G (Rh6G) exhibited three strong surface-enhanced Raman scattering (SERS) peaks at 613, 1,363, and 1,510 cm^?1, and their SERS intensities were enhanced when the concentration of Rh6G increased. In the presence of Hg²⁺, the SERS intensity decreased greatly owing to formation of stable Rh6G-HgBr ₄ ^2? ternary association complex molecules as well as its particles. In the optimal condition, the decreased SERS intensity at 613 cm^?1 responds linearly with the concentration of Hg²⁺ over 25–2,000 nmol/L. Thus, a new sensitive SERS method has been proposed for the determination of trace Hg²⁺ in the water sample, with satisfactory results.     

Diagonally Aligned Squared Metal Nano-pillar with Increased Hotspot Density as a Highly Reproducible SERS Substrate

Metal nanostructure on dielectric substrate with increased hotspot density has drawn considerable research interest in recent years toward the study of surface-enhanced Raman spectroscopy (SERS). In this paper, we report the fabrication of a diagonally aligned squared metal nano-pillar (SMNP) on a dielectric substrate and revealed it as an efficient SERS substrate with increased hotspot density for sensing of Raman active materials. Due to dipolar coupling and lightening rod effect between the neighboring nano-pillars, the localized surface plasmon resonance (LSPR) field intensity increased significantly in the space between two neighboring SMNP which would lead to the enhancement of SERS signal. The SMNP has been fabricated using electron beam lithographic (EBL) technique with hotspot density of 2.45 × 10⁷/mm². With the designed SERS substrate an average enhancement factor (EF) of 3.27 × 10⁸ has been observed with relative standard deviation of ～13 %.     

Preparation of Ag/Au bimetallic nanostructures and their application in surface‐enhanced fluorescence

An effective substrate for surface‐enhanced fluorescence, which consists of cluster Ag/Au bimetallic nanostructures on a copper surface, was synthesized via a multi‐stage galvanic replacement reaction of a Ag cluster in a chlorauric acid (HAuCl₄) solution at room temperature. The fabricated silver/gold bimetallic cluster were found to yield large surface‐enhanced fluorescence (SEF) enhancement factors for rhodamine 6G probe molecules deposited on the substrate, and also the fluorescence efficiency is critically dependent on the period of nanostructure growth. With the help of proper control reaction conditions, such as the reaction time, and concentration of reaction solutions, the maximum fluorescence enhanced effect was obtained. Therefore, the bimetallic nanostructure substrate also can be adapted to studies in SEF, which will expand the application of SEF. Copyright © 2015 John Wiley & Sons, Ltd.     

Simultaneous Photoluminescence and SERS Observation of Nanodiamond at Laser Deposition on Noble Metals

The metal-modified luminescence and surface-enhanced Raman scattering (SERS) occurring near nanostructured surfaces of noble metals recently have been observed for different kinds of nanocrystals associated with the metal nanostructures. In the present work, the photoluminescence and Raman scattering of diamond nanocrystals of sizes 100 and 300 nm patterned on Ag and Au thin nanostructured films via laser accelerated deposition using a femtosecond laser are discussed. The laser accelerated deposition forms ordered periodical nanodiamond–metal nanostructures and allows adjusting the interaction between nanodiamond and metal by varying the laser acceleration parameters as well as by using different metals (Ag and Au), and varying the structure of the metal film. Correspondingly, the spectroscopic properties of the system determined by interaction between nanoparticles and metal are tuned. The enhancement of nanodiamond photoluminescence together with SERS of graphite fraction and disordered carbon of nanodiamonds are observed for nanodiamond–Ag structures at 488- and 532-nm excitations, while for the nanodiamond–Au structure some characteristic SERS effects are observed at 785-nm excitation. The mechanisms of enhancement are discussed considering the nanodiamond–metal interaction and laser acceleration effect on nanodiamond.     

Cover Picture: J. Biophoton. 3/2009

Graphium weiskei butterfly wings and scanning electron microscope (SEM) micrograph of their detailed nanostructure. The conical cuticular nanostructures found on the metalicized surface of the G. weiskei butterfly display ideal properties as substrates for avidin/biotin assaying using SERS (12 × 10 μm) (© 2009 WILEY‐VCH Verlag GmbH & Co. KGaA, Weinheim)     

Plasmonic Interaction Between Silver Nano-Cubes and a Silver Ground Plane Studied by Surface-Enhanced Raman Scattering

The plasmonic interaction between silver nano-cubes and a silver ground plane with and without a dielectric spacer is studied for surface-enhanced Raman scattering (SERS) for rhodamine 6G (R6G) molecules absorbed onto the silver nano-cubes. Experimental results show that the composite substrates made from silver nano-cubes and the silver ground plane produce a stronger SERS signal than by the cubes alone, due to the plasmonic interaction between the cubes and the film. Numerical simulation is used to verify the plasmonic enhancement of the composite substrate and is consistent with the experimental results. The lowest concentration of R6G molecules which can be detected with the composite substrate is about 10⁻¹¹ M with our setup.     

Tuning the Plasmon of Metallic Nanostructures: From Silver Nanocubes Toward Gold Nanoboxes

One of the most significant advances in nanoscience and nanotechnology was partially driven by plasmonic effect of some noble metal nanostructures with different shapes and sizes. By controlling the geometry of metal nanostructures, their surface plasmon resonance (SPR) peaks could be tuned from the visible to the near-infrared region with various applications in sensors, optoelectronic, nanomedicine, and specifically cancer therapy. In this study, we have prepared gold nanoboxes (NBs) using the galvanic replacement between Ag nanocubes (NCs) and aqueous gold solution. Ultraviolet visible (UVvis) spectroscopy, scanning electron microscopy (SEM), X-ray diffraction (XRD), and transmitting electron microscopy (TEM) were used to characterize silver NCs and gold NBs. The primary silver NCs were synthesized by conventional polyol method at the presence of sodium sulfide to highly tune the shape and size of the NCs. Optimized cubic silver nanostructures were obtained at 90 μl of sodium sulfide injection into the solution. Moreover, the effect of quality of the cubic structure on the shape and uniformity of gold NBs was investigated. Gold NBs with hollow interior structure and SPR peak ranging from 480 to 800 nm were successfully obtained at different injection volumes of HAuCl₄ into the solution. It was demonstrated that increasing the volume of HAuCl₄ solution to about 3 mL can increase the pore number and size until the primary structure collapses into small pieces. It was also found that the concentration of gold NBs and the corresponding SPR peak intensities decrease due to pore size enhancement and decline of charge density on the surface of metal hollow nanostructures.     

Trace-Level Detection of Explosive Molecules with Triangular Silver Nanoplates-Based SERS Substrates

We report a simple route to design highly sensitive triangular silver nanoplates (TSNPs)-based SERS substrate for the trace-level detection of explosive molecules. The size-dependent localized surface plasmon resonance (LSPR) tunability for the synthesis of TSNPs is achieved by controlling reaction kinetics and seed volume in a modified seed-mediated approach. The computed extinction spectra of TSNP, using the finite-difference time-domain (FDTD) method, are in excellent agreement with the experimental results, therefore assisting further in the investigation of the plasmonic properties of TSNP. The higher electric field enhancement offered by TSNP is systematically investigated by performing the FDTD simulations for various sizes and corner rounding of TSNP. The FDTD results show that the dipolar plasmon resonance wavelength, size, and corner rounding of TSNP are the principal contributing factors for designing the high-performance SERS substrate. Herein, we have used a portable Raman system for the SERS-based detection of three important explosive molecules: picric acid (PA), ammonium nitrate (AN), and 2, 4-dinitrotoluene (DNT). The TSNP-based SERS substrates display excellent intensity enhancement factors of?~?10⁷ for rhodamine 6G (R6G) and PA and?~?10⁵ for AN. The high sensitivity of SERS substrate with limit-of-detection (LOD) of value 2.3?×?10^?11 M for PA and 3.1?×?10^?8 M for AN and effective batch-to-batch reproducibility for DNT, thus offering its potentials for field detection of explosive molecules at trace-level.

     

Surface-Enhanced Raman Scattering in Tunable Bimetallic Core-Shell

In this paper, optical properties of multilayer spherical core-shell nanoparticles based on quasi-static approach and plasmon hybridization theory are investigated. Calculations show that light absorption spectrum of bimetallic multilayer core-shell has three intense plasmon resonance peaks, which are more suitable for multiplex biosensing based on surface-enhanced Raman scattering (SERS) and localized surface plasmon resonance (LSPR). The plasmon resonance peaks in bimetal nanshells are optimized by tuning the geometrical parameters. In addition, the optimal geometry is discussed to obtain the Raman enhancement factor in bimetallic multilayer nanoshell. SERS enhancement factor is calculated with consideration of dampings due to both the electron scattering and the radiation at the boundary and modified Drude model in dielectric function of bimetallic nanoshell. It is shown that bimetallic nanoshell with the small size exhibits strong SERS enhancement factor (~6.63 × 10⁵) with additional collision dampings and ~2.9 × 10⁹ with modified Drude model which are suitable for biosensing applications. In addition, any variation in blood concentration and oxygen level can be detected by this bimetallic core-shell nanoparticle with sensitivity of Δλ/Δn = 264.91 nm/RIU.     

Silver Nanoparticles and Nanorings for Surface-Enhanced Raman Scattering

Silver (Ag) nanoparticles (NPs) and Ag nanorings (NRs) have been fabricated. Due to the inherent features of Ag NPs and Ag NRs, strong electromagnetic (EM) near-field distributions were expected, and hence surface-enhanced Raman scattering (SERS) activity was demonstrated. Size and interparticle gaps distribution of Ag NPs were estimated to be 48.14?±?10.14 nm and 14.11?±?5.24 nm respectively along with estimated coverage density of?~?4?×?10¹⁰ cm^?2. On the other hand, Ag NRs were found to consist of Ag clusters and of various shapes and sizes, instead of a perfect ring structure. High-resolution FESEM revealed that the individual constituent clusters were different from each other, particularly in terms of size and shape in addition to the cases how such clusters were connected to form the edge of the NR. However, the coverage density of Ag NRs was estimated to be?~?5.6?×?10⁶ cm^?2. Based on the scenarios, it was speculated that the local EM near-field distribution would excel and thus led to enhanced SERS signals. SERS enhancement of R6G was estimated as high as 2.18?×?10⁴ and 2.78?×?10⁴ at 610 cm^?1 (C???C ring bending mode in phenyl rings) for Ag NPs and Ag NRs respectively. FDTD analysis was carried out to elucidate the EM near-field distributions.

Graphical abstract

Ag NPs and Ag NRs from an ultrathin layer of Ag on ZnO/Glass (middle pane) confirming high EF of R6G adsorbed on Ag NRs (right pane) and Ag NPs (left pane) supported by corresponding EM near-field distributions.

     

Green synthesis and antibacterial effects of aqueous colloidal solutions of silver nanoparticles using camomile terpenoids as a combined reducing and capping agent

Green synthesis method using camomile extract was applied to synthesize silver nanoparticles to tune their antibacterial properties merging the synergistic effect of camomile and Ag. Scanning transmission electron microscopy revealed that camomile extract (CE) consisted of porous globular nanometer sized structures, which were a perfect support for Ag nanoparticles. The Ag nanoparticles synthesized with the camomile extract (AgNPs/CE) of 7 nm average sizes, were uniformly distributed on the CE support, contrary to the pure Ag nanoparticles synthesized with glucose (AgNPs/G), which were over 50 nm in diameter and strongly agglomerated. The energy dispersive X-ray spectroscopy chemical analysis showed that camomile terpenoids act as a capping and reducing agent being adsorbed on the surface of AgNPs/CE enabling their reduction from Ag⁺ and preventing them from agglomeration. Fourier transform infrared and ultraviolet–visible spectroscopy measurements confirmed these findings, as the spectra of AgNPs/CE, compared to pure CE, did not contain the 1109 cm^?1 band, corresponding to –C–O groups of terpenoids and the peaks at 280 and 320 nm, respectively. Antibacterial tests using four bacteria strains showed that the AgNPs/CE performed five times better compared to CE AgNPs/G samples, reducing totally all the bacteria in 2 h.     

Optical Properties of Noncontinuous Gold Shell Engineered on Silica Mesosphere

The optical properties of individual noncontinuous shells with different gold coverage are investigated by the single-particle dark field scattering measurements and single-particle surface-enhanced Raman scattering (SERS) measurements at different excitation wavelengths. By controlling the growth of gold seeds, multi-metallic nanogaps/crevices with different optical responses are assembled on silica mesospheres forming noncontinuous shells that can be confirmed through the transmission electron microscope images. We find the surface plasmon resonance of single shell red-shifts from 510 to 680 nm with the increase of gold coverage. At the excitation of 532 and 785 nm, the best enhancements about 2.0?×?10⁵ and 1.1?×?10⁷ are obtained on spheres with ～60 and 83 % gold coverage, respectively. The weak polarization-dependent SERS indicates that the enhancement is from the multi-gaps on single noncontinuous shell. This optical tunable and SERS active noncontinuous gold shell can be applied in biosensing, ultra trace detection, and molecule analysis needing multi-wavelengths excitation.     

A Sensitive SERS Quantitative Analysis Method for Amino Acids Using Ruhemann’s Purple as Molecular Probe in Triangle Nanosilver Sol Substrate

The stable silver nanotriangle (AgNT) sol was prepared by reduction of silver ions with sodium borohydride in the presence of H₂O₂ and sodium citrate. Under the action of NaCl, AgNTs were aggregated to a highly surface-enhanced Raman scattering (SERS) active substrate. In pH 6.0 Na₂HPO₄-NaH₂PO₄ buffer solution (PBS) at 80 °C water bath, ninhydrin reacted with amino acids to form blue-violet complex Ruhemann’s purple (RP), and the RP molecules adsorbed on the aggregated AgNT surfaces that exhibited a strong SERS peak at 657 cm^?1. The peak was linear to amino acid concentration in the range of 0.7–99.8 μmol/L, with a detection limit (DL) of 0.5 μmol/L. This SERS method was applied to detect amino acid in samples, with satisfactory results. In addition, the analytical system was also investigated by resonance Rayleigh scattering (RRS), absorption, and electron microscope techniques.     

A Study on the Morphology of the Silver Nanoparticles Deposited on the n-Type Porous Silicon Prepared Under Different Illumination Types

In this study, the influence of n-type porous Si (n-PS) morphology properties and the performance of Ag nanoparticles (AgNPs)/n-PS Raman substrate were investigated. Two kinds of n-PS morphology (macro n-PS and mud n-PS) structures were fabricated by laser-assisted etching (LAE) process and ordinary light-assisted etching (OLAE) process, respectively. A simple and cost-effective immersion plating process of n-PS in 0.01 M concentration of AgNO₃ for 16-min immersion time was used to synthesize AgNPs. The morphological properties of the deposited AgNPs on the macro n-PS layer showed that the deposition process is concentrated on the pore wall with a little density, while for mud n-PS, the AgNP layer is mainly composed of high-density uniformly distributed spherical particles located over the mud surface. Surface-enhanced Raman scattering (SERS) process of AgNPs/n-PS revealed strong dependence on the morphology and the density of AgNPs. Enhancement factor (EF) of Raman signal of AgNPs/mud n-PS substrate is three orders of magnitude higher than that of AgNPs/macro n-PS substrate of about 1.6 × 10¹¹ and 8.2 × 10⁸, respectively.     

Gamma–Radiation-Assisted Synthesis of Luminescent ZnO/Ag Heterostructure Core–Shell Nanocomposites

There is increasing interest in tuning the physical properties of semiconductor nanostructures using metal nanoparticles. In this work, ZnO nanosphere covered with Ag nanoparticles were synthesized using gamma–radiation-assisted method. The amount of deposited Ag nanoparticles is controlled by changing irradiation dose in the range of 30–100 kGy in order to tune the semiconductor–metal interaction. The successful deposition of Ag on the ZnO nanoparticles is examined by analyzing the morphology, microstructure, optical, and magnetic properties of ZnO/Ag nanoparticles through field emission scanning electron (FESEM), microscopy X-ray diffraction spectra, UV-visible absorption, photoluminescence measurement, and vibrating sample magnetometer. FESEM and elemental mapping results confirmed that Ag nanoparticles have been concentrated at the surface of spherical ZnO particles. Moreover, formation of pure metallic Ag nanoparticles has been confirmed by XRD analysis. UV-visible absorption spectra of obtained ZnO/Ag showed two combined peaks, a weak peak at the shoulder around 360 nm corresponds to ZnO and a sharp absorption at 420 nm refers to spherical Ag nanoparticles. Obtained results from photoluminescence revealed that the near-band-edge emission and defect-related visible emission bands of ZnO could be enhanced dramatically at the same time by deposition of Ag nanoparticles, which was ascribed to localized surface plasmon–exciton coupling and surface plasmon scattering. Controlling the semiconductor and metal coupling effect is interesting because of its application in highly efficient optoelectronic devices and biosensor.     

Pyrogenic temperature affects the particle size of biochar-supported nanoscaled zero valent iron (nZVI) and its silver removal capacity

Particle size of nanoscaled zero valent iron (nZVI) in nanocomposites can be affected by support materials. In this work, nZVI was supported by bamboo-derived biochars produced at 450 °C (BBL) and 600 °C (BBH). Total iron (Fe) contents were 14.4 and 11.9% for nZVI immobilized in BBL (nZVI/BBL) and BBH (nZVI/BBH), respectively. The resultant nanocomposites were characterized by transmission electron microscopy (TEM), X-ray diffraction (XRD), and scanning electron microscopy/energy-dispersive X-ray analyses (SEM/EDS). The nZVI was successfully embedded in biochar pores and surfaces as confirmed by SEM/EDS and XRD. TEM revealed that particle sizes of nZVI in nZVI/BBL and nZVI/BBH were roughly 26 and 40 nm, respectively. The Ag⁺ sorption isotherms (25–300 mg L^?1 Ag⁺) suggested that 1 kg of nZVI in nZVI/BBL and nZVI/BBH removed as much as 745.5 and 534.5 g Ag⁺, respectively. The results suggested that Ag⁺ removal capacity was related to particle size of nZVI, which was also affected by pyrogenic temperature.