Application of the reuseable, KanMX selectable marker to industrial yeast: construction and evaluation of heterothallic wine strains of Saccharomyces cerevisiae, possessing minimal foreign DNA sequences

The characterisation of wine yeasts and the complex metabolic processes influencing wine fermentation and the quality of wine might best be achieved by exploiting the standard classical and recombinant genetic techniques which have been successfully used with laboratory strains. However, application of these techniques to industrial strains has been restricted because such strains are typically prototrophic and often polyploid. To overcome this problem, we have identified commercial wine strains with good mating and sporulation properties from which heterothallic derivatives were constructed by disruption of the HO gene. Consequently, these haploids are amenable to genetic analysis, whilst retaining desirable wine-making properties. The approach used was an adaptation of a previously published gene disruption procedure for laboratory yeast and is based on the acquisition of geneticin resistance from a removable KanMX marker. The present work is the first report of the application of a construct of this type to the disruption of the HO gene in wine yeasts that are in common commercial use. Most of the 4.9-kb disruption construct was successfully removed from the genome of the haploid derivative strains by loop-out of the KanMX marker through meiotic recombination. Sequencing of the HO region confirmed the reduction of foreign sequences to a 582-bp fragment comprised largely of a single direct repeat at the target gene. The removal of the active foreign gene (conferring antibiotic resistance) allows the application of other constructs based on the KanMX module without the need to resort to other selectable marker systems. Laboratory-scale fermentation trials typically showed minimal differences between the HO disruptants and the parental wine strains in terms of fermentation kinetics and formation of key metabolites.     

酿酒酵母SNF4基因敲除缺失菌株的构建

构建一株酿酒酵母SNF4基因缺失菌株并研究其对乙醇产量的影响。扩增带有SNF4基因上下游同源序列和Kanr筛选标记的SNF4基因敲除组件,转化到酿酒酵母YS2获得阳性克隆子,然后将质粒pSH65转到阳性克隆子中,半乳糖诱导pSH65表达Cre酶切除Kanr筛选标记,获得SNF4等位基因完全缺失菌株YS2-△SNF4。发酵实验结果表明,缺失菌株YS2-△SNF4乙醇产量较出发菌株提高了7.57％。利用Cre-LoxP系统,成功构建了SNF4等位基因完全缺失菌株并提高乙醇产生量。     

Size Of Gene Specific Inverted Repeat - Dependent Gene Deletion In Saccharomyces cerevisiae

We describe here an approach for rapidly producing scar-free and precise gene deletions in S. cerevisiae with high efficiency. Preparation of the disruption gene cassette in this approach was simply performed by overlap extension-PCR of an invert repeat of a partial or complete sequence of the targeted gene with URA3. Integration of the prepared disruption gene cassette to the designated position of a target gene leads to the formation of a mutagenesis cassette within the yeast genome, which consists of a URA3 gene flanked by the targeted gene and its inverted repeat between two short identical direct repeats. The inherent instability of the inverted sequences in close proximity facilitates the self-excision of the entire mutagenesis cassette deposited in the genome and promotes homologous recombination resulting in a seamless deletion via a single transformation. This rapid assembly circumvents the difficulty during preparation of disruption gene cassettes composed of two inverted repeats of the URA3, which requires the engineering of unique restriction sites for subsequent digestion and T4 DNA ligation in vitro. We further identified that the excision of the entire mutagenesis cassette flanked by two DRs in the transformed S. cerevisiae is dependent on the length of the inverted repeat of which a minimum of 800 bp is required for effective gene deletion. The deletion efficiency improves with the increase of the inverted repeat till 1.2 kb. Finally, the use of gene-specific inverted repeats of target genes enables simultaneous gene deletions. The procedure has the potential for application on other yeast strains to achieve precise and efficient removal of gene sequences.     

A new type of gene‐disruption cassette with a rescue gene for Pichia pastoris

Pichia pastoris has been used for the production of many recombinant proteins, and many useful mutant strains have been created. However, the efficiency of mutant isolation by gene‐targeting is usually low and the procedure is difficult for those inexperienced in yeast genetics. In order to overcome these issues, we developed a new gene‐disruption system with a rescue gene using an inducible Cre/mutant–loxP system. With only short homology regions, the gene‐disruption cassette of the system replaces its target–gene locus containing a mutation with a compensatory rescue gene. As the cassette contains the AOX1 promoter‐driven Cre gene, when targeted strains are grown on media containing methanol, the DNA fragment, i.e., the marker, rescue and Cre genes, between the mutant‐loxP sequences in the cassette is excised, leaving only the remaining mutant‐loxP sequence in the genome, and consequently a target gene‐disrupted mutant can be isolated. The system was initially validated on ADE2 gene disruption, where the disruption can easily be detected by color‐change of the colonies. Then, the system was applied for knocking‐out URA3 and OCH1 genes, reported to be difficult to accomplish by conventional gene‐targeting methods. All three gene‐disruption cassettes with their rescue genes replaced their target genes, and the Cre/mutant–loxP system worked well to successfully isolate their knock‐out mutants. This study identified a new gene‐disruption system that could be used to effectively and strategically knock out genes of interest, especially whose deletion is detrimental to growth, without using special strains, e.g., deficient in nonhomologous end‐joining, in P. pastoris. © 2017 American Institute of Chemical Engineers Biotechnol. Prog., 33:1201–1208, 2017     

New integrative method to generate Bacillus subtilis recombinant strains free of selection markers

The novel method described in this paper combines the use of blaI, which encodes a repressor involved in Bacillus licheniformis BlaP beta-lactamase regulation, an antibiotic resistance gene, and a B. subtilis strain (BS1541) that is conditionally auxotrophic for lysine. We constructed a BlaI cassette containing blaI and the spectinomycin resistance genes and two short direct repeat DNA sequences, one at each extremity of the cassette. The BS1541 strain was obtained by replacing the B. subtilis P(lysA) promoter with that of the P(blaP) beta-lactamase promoter. In the resulting strain, the cloning of the blaI repressor gene confers lysine auxotrophy to BS1541. After integration of the BlaI cassette into the chromosome of a conditionally lys-auxotrophic (BS1541) strain by homologous recombination and positive selection for spectinomycin resistance, the eviction of the BlaI cassette was achieved by single crossover between the two short direct repeat sequences. This strategy was successfully used to inactivate a single gene and to introduce a gene of interest in the Bacillus chromosome. In both cases the resulting strains are free of selection marker. This allows the use of the BlaI cassette to repeatedly further modify the Bacillus chromosome.     

A New Method for Repeated “Self-Cloning” Promoter Replacement in <Emphasis Type="Italic">Saccharomyces cerevisiae</Emphasis>

A method for repeated PCR-mediated promoter replacement in the yeast Saccharomyces cerevisiae is described. It was proposed to use the DNA fragment comprising the marker gene that enables both positive and negative selection (a selectable/counter-selectable marker) surrounded by direct repeats of the desired promoter as a promoter replacement cassette. This fragment is integrated upstream of the target gene because of PCR-added terminal sequences for homologous recombination with the target locus. Subsequent marker excision via homologous recombination between the copies of the two promoters leaves one copy of the desired promoter upstream of the target genes, without any heterologous scar sequence. To test this method, a set of plasmids bearing the S. cerevisiae URA3 gene surrounded by two copies of the ADH1 or PGK1 promoter was constructed. Using these cassettes, the native promoters of the GSH1 and GSH2 genes were replaced in the ura3Δ0 recipient strains. The proposed method is useful for research applications due to simple marker excision, and for construction of “self-cloning” industrial strains, because no heterologous DNA is retained in the genome of the resulting strain after marker excision.     

产生无标记农杆菌突变体方法的建立及优化

农杆菌已经用作许多生物过程研究的模型细菌,为了解析这些生物过程的分子机理,对农杆菌的某些基因进行突变就显得非常重要．以自杀性基因sacB作为反向可选择性标记基因,利用同源重组的原理,建立了一种可对农杆菌基因进行准确插入、删除和位点置换的突变方法,所获突变体不带任何不需要的外源DNA序列．通过详细研究同源序列的长度对农杆菌同源重组效率和突变体产生概率的影响,以及对农杆菌中的同源重组机理的分析,提出了优化该突变体产生方法的方案,即通过设计不等长的上下游同源序列和选择其中一种类型的单交换重组体来筛选二次交换重组体的方法,可以显著地提高理想突变体的产生概率．研究结果对如何提高突变体的产生概率和减少突变体筛选的工作量具重要的参考价值．利用该方法成功地获得了两个基因被同时删除而且不含抗性标记的农杆菌突变株．     

PCR-mediated generation of a gene disruption construct without the use of DNA ligase and plasmid vectors

We introduce a PCR-based procedure for generating a gene disruption construct. This method depends on DNA fragment fusion by the PCR technique and requires only two steps of PCR to obtain a sufficient amount of the gene disruption construct for one transformation experiment. The first step involves three separate PCR syntheses of a selectable marker cassette and the 5′- and 3′-regions of a target gene. Of the four primers used in amplification of the 5′- and 3′-regions of the target gene, two primers placed proximal to the site of the marker cassette are designed to have sequence tags complementary to the 5′- or 3′-side of the marker cassette. The two primers used in PCR synthesis of the marker cassette are complementary to the tagged primers. By fusion PCR, the 5′ and 3′ PCR products are linked to the marker cassette via the regions of tagged primers that overlap. A sufficient amount of the disruption construct can be directly amplified with the outermost primers. This method is simple, rapid and relatively inexpensive. In addition, there is the freedom of attaching long flanking regions to any selectable marker cassette.     

Transfer RNA genes frequently serve as integration sites for prokaryotic genetic elements.

The DNA sequences were determined at the boundaries of the integrated copy of the archaebacterial genetic element SSV1. A 44 bp sequence present as a single copy on the 15.5 kb circular SSV1 DNA flanked the integrated copy as a direct DNA sequence repeat, suggesting that SSV1 integration occurred by recombination between this 44 bp SSV1 sequence and an identical sequence on the bacterial chromosome. At the left attachment site, a region encompassing the 44 bp attachment core sequence and the 31 nucleotides upstream of it displayed all characteristics expected for an arginine tRNA gene. An analysis of published attachment site sequences of other systems revealed that tRNA genes also constitute the bacterial attachment site in the case of three temperate phages and two transmissible plasmids in eubacteria, indicating a widespread occurrence of tRNA genes as integration target sites. This finding may be important for the understanding of mechanisms and evolution of site-specific recombination.     

Selection-marker-free modification of the murine beta-casein gene using a lox2272 [correction of lox2722] site

Gene targeting and site-specific recombination strategies allow the precise modification of the eukaryotic genome. Many of the recombination strategies currently used, however, will introduce a selection marker gene at the modified site. DNA sequences of prokaryotic origin like vector sequences, selection marker, and reporter genes have been shown to markedly influence the regulation of the modified genomic loci. In order to avoid the insertion of excess sequences, a biphasic recombination strategy involving homologous recombination and Cre-recombinase-mediated cassette exchange (RMCE) was devised and used to insert a foreign gene into the beta-casein gene in murine embryonic stem cells. The incompatibility of the heterospecific lox sites used for the recombinase-mediated cassette exchange was found to be critical for the success of the strategy. The frequently used mutant site lox511, which differs from the natural loxP site by a single point mutation, proved unsuitable for this approach. A mutant lox site carrying two point mutations, however, was highly effective and 90% of the selected cell clones carried the desired modification. This biphasic recombination strategy allows for the efficient and precise modification of gene loci without the concomitant introduction of a selectable marker gene.     

New Integrative Method To Generate Bacillus subtilis Recombinant Strains Free of Selection Markers

The novel method described in this paper combines the use of blaI, which encodes a repressor involved in Bacillus licheniformis BlaP β-lactamase regulation, an antibiotic resistance gene, and a B. subtilis strain (BS1541) that is conditionally auxotrophic for lysine. We constructed a BlaI cassette containing blaI and the spectinomycin resistance genes and two short direct repeat DNA sequences, one at each extremity of the cassette. The BS1541 strain was obtained by replacing the B. subtilis P_lysA promoter with that of the P_blaP β-lactamase promoter. In the resulting strain, the cloning of the blaI repressor gene confers lysine auxotrophy to BS1541. After integration of the BlaI cassette into the chromosome of a conditionally lys-auxotrophic (BS1541) strain by homologous recombination and positive selection for spectinomycin resistance, the eviction of the BlaI cassette was achieved by single crossover between the two short direct repeat sequences. This strategy was successfully used to inactivate a single gene and to introduce a gene of interest in the Bacillus chromosome. In both cases the resulting strains are free of selection marker. This allows the use of the BlaI cassette to repeatedly further modify the Bacillus chromosome.     

An rpsL cassette, janus, for gene replacement through negative selection in Streptococcus pneumoniae.

Natural genetic transformation offers a direct route by which synthetic gene constructs can be placed into the single circular chromosome of Streptococcus pneumoniae. However, the lack of a general negative-selection marker has hampered the introduction of constructs that do not confer a selectable phenotype. A 1.3-kb cassette was constructed comprising a kanamycin (Kn) resistance marker (kan) and a counterselectable rpsL(+) marker. The cassette conferred dominant streptomycin (Sm) sensitivity in an Sm-resistant background in S. pneumoniae. It was demonstrated that it could be used in a two-step transformation procedure to place DNA of arbitrary sequence at a chosen target site. The first transformation into an Sm-resistant strain used the cassette to tag a target gene on the chromosome by homologous recombination while conferring Kn resistance but Sm sensitivity on the recombinant. Replacement of the cassette by an arbitrary segment of DNA during a second transformation restored Sm resistance (and Kn sensitivity), allowing construction of silent mutations and deletions or other gene replacements which lack a selectable phenotype. It was also shown that gene conversion occurred between the two rpsL alleles in a process that depended on recA and that was susceptible to correction by mismatch repair.     

PCR-based gene targeting in the filamentous fungus Ashbya gossypii

We have investigated a PCR-based approach for one-step gene targeting in the filamentous fungus Ashbya gossypii. Short guide sequences with 40-46 bp of homology to two sequences of a targeted gene, provided by PCR, were sufficient to mediate homologous recombination. The PCR products used for transformation were generated from the newly constructed chimeric selection marker GEN3. This consists of the open reading frame of the Escherichia coli kanR gene under the control of promoter and terminator sequences of the Saccharomyces cerevisiae TEF2 gene and allows selection of G418/geneticin-resistant transformants. Verification of gene targeting was performed either by PCR or by DNA hybridization analyses, and in all 18 cases tested, correct targeting was confirmed. This approach was used for the complete deletion of the open reading frame of the A. gossypii RHO4 gene for which a double-strand sequence was available as information source for the design of PCR primers. We also demonstrated successful partial deletion of four other ORFs using single-read sequences (SRS) as sole information for the design of targeting primers. A gossypii is the first filamentous fungus in which a PCR-based gene disruption technique has been established. Since short target guide sequences are sufficient to direct homologous integration into the A. gossypii genome it is not necessary to obtain and sequence large DNA fragments from a target locus to provide the long flanking homology regions usually required for efficient targeting of cloned disruption cassettes in filamentous fungi. Thus functional analysis of A. gossypii genes is already possible, based on single-pass sequence information.     

A PCR-based method for manipulation of the vaccinia virus genome that eliminates the need for cloning.

A general method is described for altering specific genes of vaccinia virus (VV). We demonstrate and evaluate the procedure by gene inactivation, using a dominant selectable marker in conjunction with recombinant polymerase chain reaction (PCR). Primers based on the sequence of the target gene enable amplification of flanking arms and their subsequent attachment to the gpt cassette that confers resistance to mycophenolic acid. Linear PCR constructs are transfected into cells infected with wild-type vaccinia virus. Mutant viruses with gpt inserted into the target gene by homologous recombination are then selected by growth in the presence of MPA. This technique was applied to the vaccinia virus thymidine kinase gene and compared to the traditional method of constructing gpt-containing plasmids by cloning. The PCR scheme was found to be highly efficient and could theoretically be used to insert any foreign DNA element into any nonessential target gene for which partial or complete sequence information is available. The procedure can potentially be used for a wide variety of genetic modifications, including the insertion of foreign genes, with poxviruses and other DNA viruses. Genomes of microorganisms, such as bacteria and yeast that can be transformed with linear DNA, are also candidates for manipulation by this methodology.     

pSH-CUP重组质粒的构建及面包酵母酸性海藻糖 酶基因的敲除

设计含有与面包酵母(Saccharomyces cerevisiae BY-6)编码酸性海藻糖酶ATH基因内部部分序列同源的长引物,以质粒pUG6为模板进行PCR构建带有Cre/loxP系统的敲除单元,转化面包酵母获得G418阳性克隆.将铜抗性基因(cuP1-MT1)导入Cre重组酶表达质粒pSH47,得到重组质粒pSH-CUZ,并转化阳性克隆,以铜抗性筛选面包酵母转化子.半乳糖诱导表达Cre酶切除Kanr基因.重组质粒pSH-CUP的构建,不仅解决了酵母转化子筛选标记问题和非酵母基因的引入,而且使LoxP-kanMX-loxP基因敲除体系在进行真核生物基因敲除时更加方便可行.     

鼠伤寒沙门氏菌嘌呤生物合成基因表达的调控研究——Ⅱ.O~c突变体的分离和遗传鉴定

已有研究证明,编码阻遏蛋白的调节基因purR能调节嘌呤从头合成途径中除purB外所有结构基因的表达。但迄今还缺乏阻遏蛋白与这些基因的操纵基因相结合的直接证据。本文报道以嘌呤结构基因purD和purG的MudJ(lacZ,Kan~5)插入物为出发株,在外加过量腺嘌呤核苷(2mmol/L)的MacConkey平板上通过选择红色菌落分离O~c突变体的结果。从上述两株出发株分别获得了8株和9株独立的消阻遏突变体。共转导分析和顺反试验证明,两组突变体中各有1株顺式作用突变体(O~c)。这是在鼠伤寒沙门氏菌中首次获得的嘌呤O~c突变体,为研究阻遏蛋白与操纵基因相互作用提供了重要材料。     

A mini-Mu transposon-based method for multiple DNA fragment integration into bacterial genomes

A method for construction of bacterial strains with multiple DNA inserted into their chromosomes has been developed based on the mini-Mu transposon and FLP/FRT recombination. Exogenous DNA can be integrated by Mu transposition with an FRT cassette containing selection marker and conditional replicative origin (R6Kγori). Subsequently, with the introduction of a helper plasmid bearing gene of FLP recombinase, drug-resistant selection marker is excised from the chromosome. Cells cured of the helper plasmid can undergo the next cycle of transposition and excision of selection marker. Each cycle can add further foreign gene(s) to the chromosome. As an example, resistance genes of chloramphenicol, tetracycline, and gentamicin were successively integrated into the chromosome of Escherichia coli BW25113 by three cycles of insertion and excision as described above. This method proved to be simple and time-saving, which could be applicable to a variety of microorganisms.     

Selection-Marker-Free Modification of the Murine β-Casein Gene Using a lox2722 Site

Gene targeting and site-specific recombination strategies allow the precise modification of the eukaryotic genome. Many of the recombination strategies currently used, however, will introduce a selection marker gene at the modified site. DNA sequences of prokaryotic origin like vector sequences, selection marker, and reporter genes have been shown to markedly influence the regulation of the modified genomic loci. In order to avoid the insertion of excess sequences, a biphasic recombination strategy involving homologous recombination and Cre-recombinase-mediated cassette exchange (RMCE) was devised and used to insert a foreign gene into the β-casein gene in murine embryonic stem cells. The incompatibility of the heterospecific lox sites used for the recombinase-mediated cassette exchange was found to be critical for the success of the strategy. The frequently used mutant site lox511, which differs from the natural loxP site by a single point mutation, proved unsuitable for this approach. A mutant lox site carrying two point mutations, however, was highly effective and 90% of the selected cell clones carried the desired modification. This biphasic recombination strategy allows for the efficient and precise modification of gene loci without the concomitant introduction of a selectable marker gene.     

敲除sfa1基因提高酿酒酵母乙醇合成能力的研究

sfa1基因编码的酶具有乙醇脱氢酶和甲醛脱氢酶双功能活性,通过设计含有与sfa1基因两侧序列同源的长引物,以质粒pUG6和pUG66为模板进行PCR构建带有Cre/loxP系统的酿酒酵母sfa1基因敲除组件,转化酿酒酵母(Saccharomyces cerevisiae)YS1并将质粒pSH47转入阳性克隆子,诱导表达Cre酶切除筛选标记,在原ORF基因处保留一个loxP位点,丢失质粒后获得sfa1基因缺陷型酵母突变株YS1-sfa1。摇瓶发酵实验表明,突变株YS1-sfa1的乙醇分解代谢活性降低,乙醇产量提高8.0%。