Molecular Basis for Auto- and Hetero-catalytic Maturation of a Thermostable Subtilase from Thermophilic Bacillus sp. WF146

The proform of the WF146 protease, an extracellular subtilase produced by thermophilic Bacillus sp. WF146, matures efficiently at high temperatures. Here we report that the proform, which contains an N-terminal propeptide composed of a core domain (N*) and a linker peptide, is intrinsically able to mature via multiple pathways. One autocatalytic pathway is initiated by cis-processing of N* to generate an autoprocessed complex N*-I^WT, and this step is followed by truncation of the linker peptide and degradation of N*. Another autocatalytic pathway is initiated by trans-processing of the linker peptide followed by degradation of N*. Unlike most reported subtilases, the maturation of the WF146 protease occurs not only autocatalytically but also hetero-catalytically whereby heterogeneous proteases accelerate the maturation of the WF146 protease via trans-processing of the proform and N*-I^WT. Although N* acts as an intramolecular chaperone and an inhibitor of the mature enzyme, the linker peptide is susceptible to proteolysis, allowing the trans-processing reaction to occur auto- and hetero-catalytically. These studies also demonstrate that the WF146 protease undergoes subtle structural adjustments during the maturation process and that the binding of Ca²⁺ is required for routing the proform to mature properly at high temperatures. Interestingly, under Ca²⁺-free conditions, the proform is cis-processed into a unique propeptide-intermediate complex (N*-I^E) capable of re-synthesis of the proform. Based on the basic catalytic principle of serine proteases and these experimental results, a mechanism for the cis-processing/re-synthesis equilibrium of the proform and the role of the linker peptide in regulation of this equilibrium has been proposed.     

Cloning and analysis of WF146 protease, a novel thermophilic subtilisin-like protease with four inserted surface loops

Cloning and sequencing of the gene encoding WF146 protease, an extracellular subtilisin-like protease from the thermophile Bacillus sp. WF146, revealed that the WF146 protease was translated as a 416-amino acid precursor consisting of a putative 18-amino acid signal peptide, a 10-kDa N-terminal propeptide and a 32-kDa mature protease region. The mature WF146 protease shares a high degree of amino acid sequence identity with two psychrophilic subtilisins, S41 (68.2%) and S39 (65.4%), and a mesophilic subtilisin, SSII (67.1%). Significantly, these closely related proteases adapted to different temperatures all had four inserted surface loops not found in other subtilisins. However, unlike those of S41, S39 and SSII, the inserted loops of the WF146 protease possessed stabilizing features, such as the introduction of Pro residues into the loop regions. Interestingly, the WF146 protease contained five of the seven mutations previously found in a hyperstable variant of subtilisin S41 obtained by directed evolution. The proform of WF146 protease (pro-WF146 protease) was overexpressed in Escherichia coli in an inactive soluble form. After heat treatment, the 42-kDa pro-WF146 protease converted to a 32-kDa active mature form by processing the N-terminal propeptide. The purified mature WF146 protease hydrolyzed casein with an optimum temperature of 85 degrees C, and lost activity with a half-life of 30 min at 80 degrees C in the presence of 10 mM CaCl2.     

Extracellular production of active vibriolysin engineered by random mutagenesis in Escherichia coli

Vibriolysin, an extracellular protease of Vibrio proteolyticus, is synthesized as a preproenzyme. The N-terminal propeptide functions as an intramolecular chaperone and an inhibitor of the mature enzyme. Extracellular production of recombinant vibriolysin has been achieved in Bacillus subtilis, but not in Escherichia coli, which is widely used as a host for the production of recombinant proteins. Vibriolysin is expressed as an inactive form in E. coli possibly due to the inhibitory effect of the N-terminal propeptide. In this study, we isolated the novel vibriolysin engineered by in vivo random mutagenesis, which is expressed as active mature vibriolysin in E. coli. The Western blot analysis showed that the N-terminal propeptide of the engineered enzyme was processed and degraded, confirming that the propeptide inhibits the mature enzyme. Two mutations located within the engineered vibriolysin resulted in the substitution of stop codon for Trp at position 11 in the signal peptide and of Val for Ala at position 183 in the N-terminal propeptide (where position 1 is defined as the first methionine). It was found that the individual mutations are related to the enzyme activity. The novel vibriolysin was extracellularly overproduced in BL21(DE3) and purified from the culture supernatant by ion-exchange chromatography followed by hydrophobic-interaction chromatography, resulting in an overall yield of 2.2 mg/L of purified protein. This suggests that the novel engineered vibriolysin is useful for overproduction in an E. coli expression system.     

Autocatalytic activation of a thermostable glutamyl endopeptidase capable of hydrolyzing proteins at high temperatures

Glutamyl endopeptidases (GSEs) specifically hydrolyze peptide bonds formed by α-carboxyl groups of Glu and Asp residues. We cloned the gene for a thermophilic GSE (designated TS-GSE) from Thermoactinomyces sp. CDF. A proform of TS-GSE that contained a 61-amino acid N-terminal propeptide and a 218-amino acid mature domain was produced in Escherichia coli. We found that the proform possessed two processing sites and was capable of autocatalytic activation via multiple pathways. The N-terminal propeptide could be autoprocessed at the Glu^?1-Ser¹ bond to directly generate the mature enzyme. It could also be autoprocessed at the Glu^?12-Lys^?11 bond to yield an intermediate, which was then converted into the mature form after removal of the remaining part of the propeptide. The segment surrounding the two processing sites was flexible, which allowed the proform and the intermediate form to be trans-processed into the mature form by either active TS-GSE or heterogeneous proteases. Deletion analysis revealed that the N-terminal propeptide is important for the correct folding and maturation of TS-GSE. The propeptide, even its last 11-amino acid peptide segment, could inhibit the activity of its cognate mature domain. The mature TS-GSE displayed a temperature optimum of 85 °C and retained approximately 90 % of its original activity after incubation at 70 °C for 6 h, representing the most thermostable GSE reported to date. Mutational analysis suggested that the disulfide bonds Cys³²-Cys⁴⁸ and Cys¹⁸⁰-Cys¹⁸³ cumulatively contributed to the thermostability of TS-GSE.     

Efficient production of active Vibrio proteolyticus aminopeptidase in Escherichia coli by co-expression with engineered vibriolysin

The Vibrio proteolyticus aminopeptidase is synthesized as a preproprotein and then converted into an active enzyme by cleavage of the N-terminal propeptide. In recombinant Escherichia coli, however, the aminopeptidase is not processed correctly and the less-active form that has the N-terminal propeptide accumulates in the culture medium. Recently, we isolated a novel vibriolysin that was expressed as an active form in E. coli by random mutagenesis; this enzyme shows potential as a candidate enzyme for the processing of aminopeptidase. The E. coli cells were engineered to co-express the novel vibriolysin along with aminopeptidase. Co-expression of vibriolysin resulted in an approximately 13-fold increase in aminopeptidase activity, and a further increase was observed in the form lacking its C-terminal propeptide. The active aminopeptidase was purified from the culture supernatant including the recombinant vibriolysin by heat treatment and ion exchange and hydroxyapatite chromatography with high purity and 35% recovery rate. This purified aminopeptidase effectively converted methionyl-human growth hormone (Met-hGH) to hGH. Thus, this co-expression system provides an efficient method for producing active recombinant V. proteolyticus aminopeptidase.     

RifR mutations in the beginning of the Escherichia coli rpoB gene

In Escherichia coli, mutations conferring rifampicin (Rif) resistance map to the rpoB gene, which encodes the 1342-amino acid subunit of RNA polymerase. Almost all sequenced RifR mutations occur within the Rif region, encompassing rpoB codons 500–575. A strong Rif^R mutation lying outside the Rif region, which changed Val¹⁴⁶ to Phe was previously reported, but was not recovered in subsequent studies. Here, we used site-directed mutagenesis followed by selection on Rif to search for Rif^R mutations in the evolutionarily conserved segment of rpoB around codon 146. Strong Rif^R mutations were obtained when Val¹⁴⁶ was mutated, and several weak Rif^R mutations were also isolated near position 146. The results define a new, N-terminal cluster of Rif^R mutations, in addition to the classical central Rif region.     

In vitro stepwise autoprocessing of the proform of pro-aminopeptidase processing protease from Aeromonas caviae T-64

PA protease (pro-aminopeptidase processing protease) is an extracellular zinc metalloprotease produced by the Gram-negative bacterium Aeromonas caviae T-64. The 590-amino-acid precursor of PA protease is composed of a putative 19-amino-acid signal sequence, a 165-amino-acid N-terminal propeptide, a 33 kDa mature protease domain and an 11 kDa C-terminal propeptide. The proform of PA protease, which was produced as inclusion bodies in Escherichia coli, was subjected to in vitro refolding. It was revealed that the processing of the proform involved a stepwise autoprocessing mechanism. Firstly, the N-terminal propeptide was autocatalytically removed on completion of refolding and secondly, the C-terminal propeptide was autoprocessed after the degradation of the N-terminal propeptide. Both the N- and C-terminal propeptides existed as intact peptides after their successive removal, and they were subsequently degraded gradually. The degradation of the N-terminal propeptide appears to be the rate-limiting step in the maturation of the proform of PA protease.     

Enhanced activity of Rhizomucor miehei lipase by directed evolution with simultaneous evolution of the propeptide

Propeptides are short sequences that facilitate the folding of their associated proteins. The present study found that the propeptide of Rhizomucor miehei lipase (RML) was not proteolytically removed in Escherichia coli. Moreover, RML was not expressed if the propeptide was removed artificially during the cloning process in E. coli. This behavior in E. coli permitted the application of directed evolution to full-length RML, which included both propeptide and catalytic domain, to explore the role played by the propeptide in governing enzyme activity. The catalytic rate constant, k (cat), of the most active mutant RML protein (Q5) was increased from 10.63?±?0.80 to 71.44?±?3.20?min(-1) after four rounds of screening. Sequence analysis of the mutant displayed three mutations in the propeptide (L57V, S65A, and V67A) and two mutations in the functional region (I111T and S168P). This result showed that improved activity was obtained with essential involvement by mutations in the propeptide, meaning that the majority of mutants with enhanced activity had simultaneous mutations in propeptide and catalytic domains. This observation leads to the hypothesis that directed evolution has simultaneous and synergistic effects on both functional and propeptide domains that arise from the role played by the propeptide in the folding and maturation of the enzyme. We suggest that directed evolution of full-length proteins including their propeptides is a strategy with general validity for extending the range of conformations available to proteins, leading to the enhancement of the catalytic rates of the enzymes.     

Tailor-made type II <Emphasis Type="Italic">Pseudomonas</Emphasis> PHA synthases and their use for the biosynthesis of polylactic acid and its copolymer in recombinant <Emphasis Type="Italic">Escherichia coli</Emphasis>

Previously, we have developed metabolically engineered Escherichia coli strains capable of producing polylactic acid (PLA) and poly(3-hydroxybutyrate-co-lactate) [P(3HB-co-LA)] by employing evolved Clostridium propionicum propionate CoA transferase (Pct _Cp ) and Pseudomonas sp. MBEL 6-19 polyhydroxyalkanoate (PHA) synthase 1 (PhaC1 _Ps6-19). Introduction of mutations four sites (E130, S325, S477, and Q481) of PhaC1 _Ps6-19 have been found to affect the polymer content, lactate mole fraction, and molecular weight of P(3HB-co-LA). In this study, we have further engineered type II Pseudomonas PHA synthases 1 (PhaC1s) from Pseudomonas chlororaphis, Pseudomonas sp. 61-3, Pseudomonas putida KT2440, Pseudomonas resinovorans, and Pseudomonas aeruginosa PAO1 to accept short-chain-length hydroxyacyl-CoAs including lactyl-CoA and 3-hydroxybutyryl-CoA as substrates by site-directed mutagenesis of four sites (E130, S325, S477, and Q481). All PhaC1s having mutations in these four sites were able to accept lactyl-CoA as a substrate and supported the synthesis of P(3HB-co-LA) in recombinant E. coli, whereas the wild-type PhaC1s could not accumulate polymers in detectable levels. The contents, lactate mole fractions, and the molecular weights of P(3HB-co-LA) synthesized by recombinant E. coli varied depending upon the source of the PHA synthase and the mutants used. PLA homopolymer could also be produced at ca. 7 wt.% by employing the several PhaC1 variants containing E130D/S325T/S477G/Q481K quadruple mutations in wild-type E. coli XL1-Blue.     

Improving olefin tolerance and production in E. coli using native and evolved AcrB

Microorganisms can be engineered for the production of chemicals utilized in the polymer industry. However many such target compounds inhibit microbial growth and might correspondingly limit production levels. Here, we focus on compounds that are precursors to bioplastics, specifically styrene and representative alpha‐olefins; 1‐hexene, 1‐octene, and 1‐nonene. We evaluated the role of the Escherichia coli efflux pump, AcrAB‐TolC, in enhancing tolerance towards these olefin compounds. AcrAB‐TolC is involved in the tolerance towards all four compounds in E. coli. Both styrene and 1‐hexene are highly toxic to E. coli. Styrene is a model plastics precursor with an established route for production in E. coli (McKenna and Nielsen, 2011). Though our data indicates that AcrAB‐TolC is important for its optimal production, we observed a strong negative selection against the production of styrene in E. coli. Thus we used 1‐hexene as a model compound to implement a directed evolution strategy to further improve the tolerance phenotype towards this alpha‐olefin. We focused on optimization of AcrB, the inner membrane domain known to be responsible for substrate binding, and found several mutations (A279T, Q584R, F617L, L822P, F927S, and F1033Y) that resulted in improved tolerance. Several of these mutations could also be combined in a synergistic manner. Our study shows efflux pumps to be an important mechanism in host engineering for olefins, and one that can be further improved using strategies such as directed evolution, to increase tolerance and potentially production. Biotechnol. Bioeng. 2015;112: 879–888. © 2015 Wiley Periodicals, Inc.     

Engineering of LadA for enhanced hexadecane oxidation using random- and site-directed mutagenesis

LadA, a monooxygenase catalyzing the oxidation of n-alkanes to 1-alkanols, is the key enzyme for the degradation of long-chain alkanes (C₁₅–C₃₆) in Geobacillus thermodenitrificans NG80-2. In this study, random- and site-directed mutagenesis were performed to enhance the activity of the enzyme. By screening 7,500 clones from random-mutant libraries for enhanced hexadecane hydroxylation activity, three mutants were obtained: A102D, L320V, and F146C/N376I. By performing saturation site-directed mutagenesis at the 102, 320, 146, and 376 sites, six more mutants (A102E, L320A, F146Q/N376I, F146E/N376I, F146R/N376I, and F146N/N376I) were generated. Kinetic studies showed that the hydroxylation activity of purified LadA mutants on hexadecane was 2–3.4-fold higher than that of the wild-type enzyme, with the activity of F146N/N376I being the highest. Effects of the mutations on optimum temperature, pH, and heat stability of LadA were also investigated. A complementary study showed that Pseudomonas fluorescens KOB2Δ1 strains expressing the LadA mutants grew more rapidly with hexadecane than the strain expressing wild-type LadA, confirming the enhanced activity of LadA mutants in vivo. Structural changes resulting from the mutations were analyzed and the correlation between structural changes and enzyme activity was discussed. The mutants generated in this study are potentially useful for the treatment of environmental oil pollution and in other bioconversion processes.     

Functional expression and molecular characterization of AtUBC2-1, a novel ubiquitin-conjugating enzyme (E2) from Arabidopsis thaliana

The first member of a novel subfamily of ubiquitin-conjugating E2-proteins was cloned from a cDNA library of Arabidopsis thaliana. Genomic blots indicate that this gene family (AtUBC2) consists of two members and is distinct from AtUBC1, the only other E2 enzyme known from this species to date (M.L. Sullivan and R.D. Vierstra, Proc. Natl. Acad. Sci. USA 86 (1989) 9861-9865). The cDNA sequence of AtUBC2-1 extends over 794 bp which would encode a protein of 161 amino acids and a calculated molecular mass of 18.25 kDa. The protein encoded by AtUBC2-1 is shown to accept ¹²⁵I-ubiquitin from wheat E1 enzymes, when expressed from Escherichia coli hosts as fusion protein carrying N-terminal extensions. It is deubiquitinated in the presence of lysine and, by these criteria, is considered a functional E2 enzyme.     

RifR mutations in the beginning of the Escherichia coli rpoB gene

In Escherichia coli, mutations conferring rifampicin (Rif) resistance map to the rpoB gene, which encodes the 1342-amino acid β subunit of RNA polymerase. Almost all sequenced RifR mutations occur within the Rif region, encompassing rpoB codons 500–575. A strong Rif^R mutation lying outside the Rif region, which changed Val¹⁴⁶ to Phe was previously reported, but was not recovered in subsequent studies. Here, we used site-directed mutagenesis followed by selection on Rif to search for Rif^R mutations in the evolutionarily conserved segment of rpoB around codon 146. Strong Rif^R mutations were obtained when Val¹⁴⁶ was mutated, and several weak Rif^R mutations were also isolated near position 146. The results define a new, N-terminal cluster of Rif^R mutations, in addition to the classical central Rif region.     

Impact of inter-subunit interactions on the dimeric arginine kinase activity and structural stability

Arginine kinase (AK) is a key enzyme for cellular energy metabolism, catalyzing the reversible phosphoryl transfer from phosphoarginine to ADP in invertebrates. In this study, the inter-subunit hydrogen bonds between the Q53 and D200 and between D57 and D200 were disrupted to explore their roles in the activity and structural stability of Stichopus japonicus (S. japonicus) AK. Mutating Q53 and/or D57 to alanine (A) can cause pronounced loss of activity and substrate synergism, and cause distinct conformational changes. Spectroscopic experiments indicated that mutations destroying the inter-subunit hydrogen bonds impaired the structure of dimer AK, and resulted in a partially unfolded state. The inability to fold to the functional compact state made the mutants prone to be inactivated and aggregate under environmental stresses. Restoring hydrogen bonds in Q53E and D57E mutants could rescue the loss of activity and substrate synergism, and conformational changes. All those results suggested that the inter-subunit interactions played a key role in keeping the activity, substrate synergism and structural stability of dimer AK. The result herein may provide a clue in understanding the folding and self-assembly processes of oligomeric proteins.     

Molecular properties of the glucosaminidase AcmA from Lactococcus lactis MG1363: Mutational and biochemical analyses

The major autolysin AcmA of Lactococcus lactis ssp. cremoris MG1363 is a modular protein consisting of an N-terminal signal sequence, a central enzymatic region (glu_acma as a glucosaminidase), and a C-terminal cell-recognition domain (LysM123). glu_acma (about 160 amino acids) belongs to the glycoside hydrolase (GH) 73 family, and the two acidic residues E128 and D153 have been thought to be catalytically important. In this study, amino-acid substitution analysis of AcmA was first carried out in the Escherichia coli system. Point mutations E94A, E94Q, E128A, D153A, and Y191A markedly reduced cell-lytic activity (3.8%, 1.1%, 4.2%, 4.8%, and 2.4%, respectively), whereas E128Q and D153N retained significant residual activities (32.1% and 44.0%, respectively). On the other hand, Y191F and Y191W mutations retained high activities (66.2% and 46.0%, respectively). These results showed that E94 (rather than E128 and D153) and the aromatic residue Y191 probably play important roles in catalysis of AcmA. Together with mutational analysis of another GH73 glucoaminidase Glu_atlwm from the Staphylococcus warneri M autolysin Atl_WM, these results suggested that the GH73 members cleave a glycosidic bond via a substrate-assisted mechanism, as postulated in the GH20 members. AcmA and Glu_atlwm were purified from E. coli recombinant cells, and their enzymatic properties were studied.     

Peptide analyses of a protein component, 50-8, of 50s ribosomal subunit from erythromycin resistant mutants of Escherichia coli and Escherichia freudii

Summary Chromatographic analyses on a Dowex 50x8 column of tryptic digests of the mutationally altered 50-8 protein component from several erythromycin resistant (ery ^r) mutants of Escherichia coli and Escherichia freundii have been performed. It was found that (1) the difference in the elution profile of the altered components detected with carboxymethyl cellulose column chromatography reflects the difference in their amino acid sequence, (2) the structural change(s) of the 50-8 protein from three E. coli ery ^r mutants examined seems to exist only in the same single peptide fragment and (3) the primary structure of the 50-8(R) protein of E. freundii (ery ^s: wild type) differs from that of E. coli Q13 (ery ^s) and the structural change in 50-8(R) component of E. freundii caused by the ery ^r mutation was found to take place in different peptide fragments from that in which the mutational change of the E. coli 50-8 component occurred.     

E292 is important for the aminoacylation activity of Escherichia coli leucyl-tRNA synthetase

Escherichia coli leucyl-tRNA synthetase (LeuRS) has a large connecting polypeptide (CP1) inserted into its active site. It was demonstrated that the peptide bond between E292–A293 was crucial for the aminoacylation activity of E. coli LeuRS. To investigate the effect of E292 on the function of Escherichia coli LeuRS, E292 was mutated to K, F, S, D, Q and A. These mutations at 292 did not change the specific activity of the amino acid activation reaction. Though the conformational change of these mutants was not detected in CD, their aminoacylation activities were impaired to varying extents. The mutation of E to K decreased the aminoacylation activity to the largest extent. Analysis of the K_m values of these mutants for the three substrates showed that the E292 was not involved in the binding of leucine and that all mutants had stronger binding with ATP.     

Proline 146 is critical to the structure, function and targeting of sod2, the Na/H exchanger of Schizosaccharomyces pombe

Sod2 is the Na⁺/H⁺ exchanger of the fission yeast Schizosaccharomyces pombe that is principally responsible for salt tolerance. We examined the role of nine polar, membrane associated amino acids in the ability of the protein to confer salt tolerance in S. pombe. Wild type sod2 protein with a C-terminal GFP tag effectively rescued salt tolerance in S. pombe with deleted endogenous sod2. Sod2 protein with the mutations P163A, P183A, D298N, D389N, E390Q, E392Q and E397Q also conveyed salt tolerance as effectively as the wild type sod2 protein. In contrast, the mutation P146A resulted in a protein that did not convey salt tolerance nearly as effectively as the wild type and did not extrude Na⁺ as well as the wild type. Mutation of Pro¹⁴⁶ to Ser, Asp or Lys had an intermediate effect. Mutation of Thr¹⁴² to Ser resulted in a slightly defective protein. Western blot analysis showed that all mutant proteins were expressed at similar levels as wild type sod2 protein. Examination of the localization of the proteins showed that wild type and most sod2 mutants were present in the plasma membrane while the P146A mutant had an intracellular localization. Limited tryptic digestion suggested that the P146A sod2 protein had a change in conformation in comparison to the wild type protein. The results suggest that Pro¹⁴⁶ is an amino acid critical to sod2 structure, function and localization.     

Biosynthesis of the human milk oligosaccharide 3-fucosyllactose in metabolically engineered Escherichia coli via the salvage pathway through increasing GTP synthesis and β-galactosidase modification

3-Fucosyllactose (3-FL) is one of the major fucosylated oligosaccharides in human milk. Along with 2′-fucosyllactose (2′-FL), it is known for its prebiotic, immunomodulator, neonatal brain development, and antimicrobial function. Whereas the biological production of 2′-FL has been widely studied and made significant progress over the years, the biological production of 3-FL has been hampered by the low activity and insoluble expression of α-1,3-fucosyltransferase (FutA), relatively low abundance in human milk oligosaccharides compared with 2′-FL, and lower digestibility of 3-FL than 2′-FL by bifidobacteria. In this study, we report the gram-scale production of 3-FL using E. coli BL21(DE3). We previously generated the FutA quadruple mutant (mFutA) with four site mutations at S46F, A128N, H129E, Y132I, and its specific activity was increased by nearly 15 times compared with that of wild-type FutA owing to the increase in k_cat and the decrease in K_m. We overexpressed mFutA in its maximum expression level, which was achieved by the optimization of yeast extract concentration in culture media. We also overexpressed L-fucokinase/GDP- L -fucose pyrophosphorylase to increase the supply of GDP-fucose in the cytoplasm. To increase the mass of recombinant whole-cell catalysts, the host E. coli BW25113 was switched to E. coli BL21(DE3) because of the lower acetate accumulation of E. coli BL21(DE3) than that of E. coli BW25113. Finally, the lactose operon was modified by partially deleting the sequence of LacZ (lacZΔm15) for better utilization of D -lactose. Production using the lacZΔm15 mutant yielded 3-FL concentration of 4.6 g/L with the productivity of 0.076 g·L⁻¹·hr⁻¹ and the specific 3-FL yield of 0.5 g/g dry cell weight.     

Participation of RNase I in MS2 Phage Growth

Participation of RNase I in the growth of phage on infection with bacteriophage MS2 was studied.

Some strains of uracil-requiring E. coli were isolated, grown in MS broth, and transferred to a minimal medium to exhaust the pool of nucleotides. The phage was then added to the cells grown in uracil-deficient medium. The growth of phage was observed to occur at the burst size of two hundreds in strains of E. coli K12S (F⁺) U^? and C600 (F⁺) U^?, which possessed RNase I, but not in strains, A19 (Hfr) U^? and Q13 (Hfr) U^?, which lacked RNase I.

A marked increase in acid-soluble fraction was observed with E. coli K12S (F⁺) U^? and C600 (F⁺) U^?, whereas the increase was little with E. coli A10 (Hfr) U^? and Q13 (Hfr) U^? Conditions for the growth of phage in uracil-deficient medium were investigated and the effect of antibiotics were also investigated.