Interaction of lung surfactant proteins with anionic phospholipids.

Langmuir isotherms, fluorescence microscopy, and atomic force microscopy were used to study lung surfactant specific proteins SP-B and SP-C in monolayers of dipalmitoylphosphatidylglycerol (DPPG) and palmitoyloleoylphosphatidylglycerol (POPG), which are representative of the anionic lipids in native and replacement lung surfactants. Both SP-B and SP-C eliminate squeeze-out of POPG from mixed DPPG/POPG monolayers by inducing a two- to three-dimensional transformation of the fluid-phase fraction of the monolayer. SP-B induces a reversible folding transition at monolayer collapse, allowing all components of surfactant to remain at the interface during respreading. The folds remain attached to the monolayer, are identical in composition and morphology to the unfolded monolayer, and are reincorporated reversibly into the monolayer upon expansion. In the absence of SP-B or SP-C, the unsaturated lipids are irreversibly lost at high surface pressures. These morphological transitions are identical to those in other lipid mixtures and hence appear to be independent of the detailed lipid composition of the monolayer. Instead they depend on the more general phenomena of coexistence between a liquid-expanded and liquid-condensed phase. These three-dimensional monolayer transitions reconcile how lung surfactant can achieve both low surface tensions upon compression and rapid respreading upon expansion and may have important implications toward the optimal design of replacement surfactants. The overlap of function between SP-B and SP-C helps explain why replacement surfactants lacking in one or the other proteins often have beneficial effects.     

Lipid oxidation and signalling in programmed cell death

The pulmonary surfactant lines as a complex monolayer of lipids and proteins the alveolar epithelial surface. The monolayer dynamically adapts the surface tension of this interface to the varying surface areas during inhalation and exhalation. Its presence in the alveoli is thus a prerequisite for a proper lung function. The lipid moiety represents about 90% of the surfactant and contains mainly dipalmitoylphosphatidylcholine (DPPC) and phosphatidylglycerol (PG). The surfactant proteins involved in the surface tension adaption are called SP-A, SP-B and SP-C. The aim of the present investigation is to analyse the properties of monolayer films made from pure SP-C and from mixtures of DPPC, DPPG and SP-C in order to mimic the surfactant monolayer with minimal compositional requirement. Pressure-area diagrams were taken. Ellipsometric measurements at the air-water interface of a Langmuir film balance allowed measurement of the changes in monolayer thickness upon compression. Isotherms of pure SP-C monolayers exhibit a plateau between 22 and 25 mN/m. A further plateau is reached at higher compression. Structures of the monolayer formed during compression are reversible during expansion. Together with ellipsometric data which show a stepwise increase in film thickness (coverage) during compression, we conclude that pure SP-C films rearrange reversibly into multilayers of homogenous thickness.

Lipid monolayers collapse locally and irreversibly if films are compressed to approximately 0–4 nm²/molecule. In contrast, mixed DPPG/SP-C monolayers with less than 5 mol% protein collapse in a controlled and reversible way. The pressure-area diagrams exhibit a plateau at 20 mN/m, indicating partial demixing of SP-C and DPPG. The thickness isotherm obtained by ellipsometry indicates a transformation into multilayer structures. In DPPC/DPPG/SP-C mixtures again a reversible collapse was observed but without a drastic increase in surface layer thickness which may be due to the formation of protrusion under the surface. Thus lipid monolayers containing small amounts of SP-C may mimic the lung surfactant.     

Effect of the hydrophobic surfactant proteins on the surface activity of spread films in the captive bubble surfactometer

The main function of pulmonary surfactant, a mixture of lipids and proteins, is to reduce the surface tension at the air/liquid interface of the lung. The hydrophobic surfactant proteins SP-B and SP-C are required for this process. When testing their activity in spread films in a captive bubble surfactometer, both SP-B and SP-C showed concentration dependence for lipid insertion as well as for lipid film refinement. Higher activity in DPPC refinement of the monolayer was observed for SP-B compared with SP-C. Further differences between both proteins were found, when subphase phospholipid vesicles, able to create a monolayer-attached lipid reservoir, were omitted. SP-C containing monolayers showed gradually increasing minimum surface tensions upon cycling, indicating that a lipid reservoir is required to prevent loss of material from the monolayer. Despite reversible cycling dynamics, SP-B containing monolayers failed to reach near-zero minimum surface tensions, indicating that the reservoir is required for stable films.     

Fluorescence, polarized fluorescence, and Brewster angle microscopy of palmitic acid and lung surfactant protein B monolayers

Fluorescence, polarized fluorescence, and Brewster angle microscopy reveal that human lung surfactant protein SP-B and its amino terminus (SP-B[1-25]) alter the phase behavior of palmitic acid monolayers by inhibiting the formation of condensed phases and creating a new fluid protein-rich phase. This fluid phase forms a network that separates condensed phase domains at coexistence and persists to high surface pressures. The network changes the monolayer collapse mechanism from heterogeneous nucleation/growth and fracturing processes to a more homogeneous process through isolating individual condensed phase domains. This results in higher surface pressures at collapse, and monolayers easier to respread on expansion, factors essential to the in vivo function of lung surfactant. The network is stabilized by a low-line tension between the coexisting phases, as confirmed by the observation of extended linear domains, or "stripe" phases, and a Gouy-Chapman analysis of protein-containing monolayers. Comparison of isotherm data and observed morphologies of monolayers containing SP-B(1-25) with those containing the full SP-B sequence show that the shortened peptide retains most of the native activity of the full-length protein, which may lead to cheaper and more effective synthetic replacement formulations.     

Lipid-protein interactions alter line tensions and domain size distributions in lung surfactant monolayers

The size distribution of domains in phase-separated lung surfactant monolayers influences monolayer viscoelasticity and compressibility which, in turn, influence monolayer collapse and set the compression at which the minimum surface tension is reached. The surfactant-specific protein SP-B decreases the mean domain size and polydispersity as shown by fluorescence microscopy. From the images, the line tension and dipole density difference are determined by comparing the measured size distributions with a theory derived by minimizing the free energy associated with the domain energy and mixing entropy. We find that SP-B increases the line tension, dipole density difference, and the compressibility modulus at surface pressures up to the squeeze-out pressure. The increase in line tension due to SP-B indicates the protein avoids domain boundaries due to its solubility in the more fluid regions of the film.     

A concentration-dependent mechanism by which serum albumin inactivates replacement lung surfactants.

Endogenous lung surfactant, and lung surfactant replacements used to treat respiratory distress syndrome, can be inactivated during lung edema, most likely by serum proteins. Serum albumin shows a concentration-dependent surface pressure that can exceed the respreading pressure of collapsed monolayers in vitro. Under these conditions, the collapsed surfactant monolayer can not respread to cover the interface, leading to higher minimum surface tensions and alterations in isotherms and morphology. This is an unusual example of a blocked phase transition (collapsed to monolayer form) inhibiting bioactivity. The concentration-dependent surface activity of other common surfactant inhibitors including fibrinogen and lysolipids correlates well with their effectiveness as inhibitors. These results show that respreading pressure may be as important as the minimum surface tension in the design of replacement surfactants for respiratory distress syndrome.     

Lung surfactant protein SP-B promotes formation of bilayer reservoirs from monolayer and lipid transfer between the interface and subphase

We investigated the possible role of SP-B proteins in the function of lung surfactant. To this end, lipid monolayers at the air/water interface, bilayers in water, and transformations between them in the presence of SP-B were simulated. The proteins attached bilayers to monolayers, providing close proximity of the reservoirs with the interface. In the attached aggregates, SP-B mediated establishment of the lipid-lined connection similar to the hemifusion stalk. Via this connection, a lipid flow was initiated between the monolayer at the interface and the bilayer in water in a surface-tension-dependent manner. On interface expansion, the flow of lipids to the monolayer restored the surface tension to the equilibrium spreading value. SP-B induced formation of bilayer folds from the monolayer at positive surface tensions below the equilibrium. In the absence of proteins, lipid monolayers were stable at these conditions. Fold nucleation was initiated by SP-B from the liquid-expanded monolayer phase by local bending, and the proteins lined the curved perimeter of the growing fold. No effect on the liquid-condensed phase was observed. Covalently linked dimers resulted in faster kinetics for monolayer folding. The simulation results are in line with existing hypotheses on SP-B activity in lung surfactant and explain its molecular mechanism.     

Folding of lipid monolayers containing lung surfactant proteins SP-B1-25 and SP-C studied via coarse-grained molecular dynamics simulations

To explore the role of lung surfactant proteins SP-B and SP-C in storing and redelivering lipid from lipid monolayers during the compression and re-expansion occurring in lungs during breathing, we simulate the folding of lipid monolayers with and without these proteins. We utilize the MARTINI coarse-grained force field to simulate monolayers containing pure dipalmitoylphosphatidylcholine (DPPC) and DPPC mixed with palmitoyloleoylphosphatidylglycerol (POPG), palmitic acid (PA), and/or peptides. The peptides considered include the 25-residue N-terminal fragment of SP-B (SP-B_1-25), SP-C, and several SP-B_1-25 mutants in which charged and hydrophilic residues are replaced by hydrophobic ones, or vice-versa. We observe two folding mechanisms: folding by the amplification of undulations and folding by nucleation about a defect. The first mechanism is observed in monolayers containing either POPG or peptides, while the second mechanism is observed only with peptides present, and involves the lipid-mediated aggregation of the peptides into a defect, from which the fold can nucleate. Fold nucleation from a defect displays a dependence on the hydrophobic character of the peptides; if the number of hydrophobic residues is decreased significantly, monolayer folding does not occur. The addition of POPG or peptides to the DPPC monolayer has a fluidizing effect, which assists monolayer folding. In contrast, the addition of PA has a charge-dependent condensing affect on DPPC monolayers containing SP-C. The peptides appear to play a significant role in the folding process, and provide a larger driving force for folding than POPG. In addition to promoting fold formation, the peptides also display fusogenic behavior, which can lead to surface refining.     

Characterization of lipid insertion into monomolecular layers mediated by lung surfactant proteins SP-B and SP-C

Pulmonary surfactant proteins, SP-B and SP-C, if present in preformed monolayers can induce lipid insertion from lipid vesicles into the monolayer after the addition of (divalent) cations [Oosterlaken-Dijksterhuis, M. A., Haagsman, H. P., van Golde, L. M. G., & Demel, R. A. (1991) Biochemistry 30, 8276-8287]. This model system was used to study the mechanisms by which SP-B and SP-C induce monolayer formation from vesicles. Lipid insertion proceeds irrespectively of the molecular class, and PG is not required for this process. In addition to lipids that are immediately inserted from vesicles into the monolayer, large amounts of vesicles are bound to the monolayer and their lipids eventually inserted when the surface area is expanded. SP-B and SP-C are directly responsible for the binding of vesicles to the monolayer. By weight, the vesicle binding capacity of SP-B is approximately 4 times that of SP-C. For vesicle binding and insertion, the formation of close contacts between monolayer and vesicles is essential. SP-B and SP-C show very similar surface properties. Both proteins form extremely stable monolayers (collapse pressures 36-37 mN/m) of alpha-helical structures oriented parallel to the interface. In monolayers consisting of DPPC and SP-B or SP-C, an increase in mean molecular area is observed, which is mainly attributed to the phospholipid. This will greatly enhance the insertion of new lipid material into the monolayer. The results of this study suggest that the surface properties and the hydrophobic nature of SP-B and SP-C are important for the protein-mediated monolayer formation.     

Electrostatic barrier to recovery of dipalmitoylphosphatidylglycerol monolayers after collapse

The reincorporation of lipids into monolayers at the air-water interface after collapse is important to the maintenance of low surface tensions on subsequent expansion and compression cycles. For single component, anionic dipalmitoylphosphatidylglycerol monolayers, the fraction of recovered lipid is proportional to the subphase ionic strength. The collapse mechanism and structure of the collapsed materials appear unchanged with ionic strength. A simple electrostatic barrier model shows that the fractional recovery depends exponentially on the Debye length; this is verified by experiment. This simple model suggests possible catalytic roles for the cationic lung surfactant specific proteins SP-B and SP-C that induce structural changes in the monolayer that may act as charge-neutralizing docking sites for surfactant in the subphase, leading to faster and more efficient recovery.     

Kinetics of phospholipid insertion into monolayers containing the lung surfactant proteins SP-B or SP-C

The lung surfactant proteins SP-B and SP-C are pivotal for fast and reversible lipid insertion at the air/liquid interface, a prerequisite for functional lung activity. We used a model system consisting of a preformed monolayer at the air/liquid interface supplemented with surfactant protein SP-B or SP-C and unilamellar vesicles injected into the subphase of a film balance. The content of SP-B or SP-C was similar to that found in lung lavage. In order to elucidate distinct steps of lipid insertion, we measured the time-dependent pressure increase as a function of the initial surface pressure, the temperature and the phosphatidylglycerol content by means of surface tension measurements and scanning force microscopy (SFM). The results of the film balance study are indicative of a two-step mechanism in which initial adsorption of vesicles to the protein-containing monolayer is followed by rupture and integration of lipid material. Furthermore, we found that vesicle adsorption on a preformed monolayer supplemented with SP-B or SP-C is strongly enhanced by negatively charged lipids as provided by DPPG and the presence of Ca2+ ions in the subphase. Hence, long-range electrostatic interactions are thought to play an important role in attracting vesicles to the surface, being the initial step in replenishment of lipid material. While insertion into the monolayer is independent of the type of protein SP-B or SP-C, initial adsorption is faster in the presence of SP-B than SP-C. We propose that the preferential interaction between SP-B and negatively charged DPPG leads to accumulation of negative charges in particular regions, causing strong adhesion between DPPG-containing vesicles and the monolayer mediated by Ca2+ ions, which eventually causes flattening and rupture of attached liposomes as observed by in situ SFM.     

Surface properties of sulfur- and ether-linked phosphonolipids with and without purified hydrophobic lung surfactant proteins

Two novel C16:0 sulfur-linked phosphonolipids (S-lipid and SO(2)-lipid) and two ether-linked phosphonolipids (C16:0 DEPN-8 and C16:1 UnDEPN-8) were studied for surface behavior alone and in mixtures with purified bovine lung surfactant proteins (SP)-B and/or SP-C. Synthetic C16:0 phosphonolipids all had improved adsorption and film respreading compared to dipalmitoyl phosphatidylcholine, and SO(2)-lipid and DEPN-8 reached maximum surface pressures of 72mN/m (minimum surface tensions of <1mN/m) in compressed films on the Wilhelmy balance (23 degrees C). Dispersions of DEPN-8 (0.5mg/ml) and SO(2)-lipid (2.5mg/ml) also reached minimum surface tensions of <1mN/m on a pulsating bubble surfactometer (37 degrees C, 20cycles/min, 50% area compression). Synthetic lung surfactants containing DEPN-8 or SO(2)-lipid+0.75% SP-B+0.75% SP-C had dynamic surface activity on the bubble equal to that of calf lung surfactant extract (CLSE). Surfactants containing DEPN-8 or SO(2)-lipid plus 1.5% SP-B also had very high surface activity, but less than when both apoproteins were present together. Adding 10wt.% of UnDEPN-8 to synthetic lung surfactants did not improve dynamic surface activity. Surfactants containing DEPN-8 or SO(2)-lipid plus 0.75% SP-B/0.75% SP-C were chemically and biophysically resistant to phospholipase A(2) (PLA(2)), while CLSE was severely inhibited by PLA(2). The high activity and inhibition resistance of synthetic surfactants containing DEPN-8 or SO(2)-lipid plus SP-B/SP-C are promising for future applications in treating surfactant dysfunction in inflammatory lung injury.     

Influence of lipid saturation grade and headgroup charge: a refined lung surfactant adsorption model

Rapid adsorption of surfactant material to the air/liquid interface of the lung is essential for maintaining normal lung function. The detailed mechanism of this process, however, remains unclear. In this study, we elucidate the influence of lipid saturation grade and headgroup charge of surface layer lipids on surfactant protein (SP)-induced vesicle insertion into monolayers spread at the air/water interface of a film balance. We used dipalmitoylphosphatidlycholine (DPPC),1,2-dipalmitoyl-sn-glycero-3-phosphoglycerol (DPPG), 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphocholine (POPC), and 1-palmitoyl-2-oleoyl-sn-glycero-3-phosphoglycerol (POPG) as monolayer lipids doped with either hydrophobic surfactant-specific protein SP-B or SP-C (0.2 and 0.4 mol %, respectively). Vesicles consisting of DPPC/DPPG (4:1, mol ratio) were injected into a stirred subphase to quantify adsorption kinetics. Based on kinetic film balance and fluorescence measurements, a refined model describing distinct steps of vesicle adsorption to surfactant monolayers is presented. First, in a protein-independent step, lipids from vesicles bridged to the interfacial film by Ca²⁺ ions are inserted into defects of a disordered monolayer at low surface pressures. Second, in a SP-facilitated step, active material insertion involving an SP-B- or SP-C-induced flip-flop of lipids occurs at higher surface pressures. Negatively charged lipids obviously influence the threshold pressures at which this second protein-mediated adsorption mechanism takes place.     

Surfactant-associated proteins: functions and structural variation

Pulmonary surfactant is a barrier material of the lungs and has a dual role: firstly, as a true surfactant, lowering the surface tension; and secondly, participating in innate immune defence of the lung and possibly other mucosal surfaces. Surfactant is composed of approximately 90% lipids and 10% proteins. There are four surfactant-specific proteins, designated surfactant protein A (SP-A), SP-B, SP-C and SP-D. Although the sequences and post-translational modifications of SP-B and SP-C are quite conserved between mammalian species, variations exist. The hydrophilic surfactant proteins SP-A and SP-D are members of a family of collagenous carbohydrate binding proteins, known as collectins, consisting of oligomers of trimeric subunits. In view of the different roles of surfactant proteins, studies determining the structure-function relationships of surfactant proteins across the animal kingdom will be very interesting. Such studies may reveal structural elements of the proteins required for surface film dynamics as well as those required for innate immune defence. Since SP-A and SP-D are also present in extrapulmonary tissues, the hydrophobic surfactant proteins SP-B and SP-C may be the most appropriate indicators for the evolutionary origin of surfactant. SP-B is essential for air-breathing in mammals and is therefore largely conserved. Yet, because of its unique structure and its localization in the lung but not in extrapulmonary tissues, SP-C may be the most important indicator for the evolutionary origin of surfactant.     

Surface activity of a synthetic lung surfactant containing a phospholipase-resistant phosphonolipid analog of dipalmitoyl phosphatidylcholine

Surface activity and sensitivity to inhibition from phospholipase A2 (PLA2), lysophosphatidylcholine (LPC), and serum albumin were studied for a synthetic C16:0 diether phosphonolipid (DEPN-8) combined with 1.5% by weight of mixed hydrophobic surfactant proteins (SP)-B/C purified from calf lung surfactant extract (CLSE). Pure DEPN-8 had better adsorption and film respreading than the major lung surfactant phospholipid dipalmitoyl phosphatidylcholine and reached minimum surface tensions <1 mN/m under dynamic compression on the Wilhelmy balance and on a pulsating bubble surfactometer (37 degrees C, 20 cycles/min, 50% area compression). DEPN-8 + 1.5% SP-B/C exhibited even greater adsorption and had overall dynamic surface tension lowering equal to CLSE on the bubble. In addition, films of DEPN-8 + 1.5% SP-B/C on the Wilhelmy balance had better respreading than CLSE after seven (but not two) cycles of compression-expansion at 23 degrees C. DEPN-8 is structurally resistant to degradation by PLA2, and DEPN-8 + 1.5% SP-B/C maintained high adsorption and dynamic surface activity in the presence of this enzyme. Incubation of CLSE with PLA2 led to chemical degradation, generation of LPC, and reduced surface activity. DEPN-8 + 1.5% SP-B/C was also more resistant than CLSE to direct biophysical inhibition by LPC, and the two were similar in their sensitivity to biophysical inhibition by serum albumin. These findings indicate that synthetic surfactants containing DEPN-8 combined with surfactant proteins or related synthetic peptides have potential utility for treating surfactant dysfunction in inflammatory lung injury.     

Surface activity in vitro: role of surfactant proteins

Pattle, who provided some of the initial direct evidence for the presence of pulmonary surfactant in the lung, was also the first to show surfactant was susceptible to proteases such as trypsin. Pattle concluded surfactant was a lipoprotein. Our group has investigated the roles of the surfactant proteins (SP-) SP-A, SP-B, and SP-C using a captive bubble tensiometer. These studies show that SP-C>SP-B>SP-A in enhancing surfactant lipid adsorption (film formation) to the equilibrium surface tension of approximately 22-25 mN/m from the 70 mN/m of saline at 37 degrees C. In addition to enhancing adsorption, surfactant proteins can stabilize surfactant films so that lateral compression induced through surface area reduction results in the lowering of surface tension (gamma) from approximately 25 mN/m (equilibrium) to values near 0 mN/m. These low tensions, which are required to stabilize alveoli during expiration, are thought to arise through exclusion of fluid phospholipids from the surface monolayer, resulting in an enrichment in the gel phase component dipalmitoylphosphatidylcholine (DPPC). The results are consistent with DPPC enrichment occurring through two mechanisms, selective DPPC adsorption and preferential squeeze-out of fluid components such as unsaturated phosphatidylcholine (PC) and phosphatidylglycerol (PG) from the monolayer. Evidence for selective DPPC adsorption arises from experiments showing that the surface area reductions required to achieve gamma near 0 mN/m with DPPC/PG samples containing SP-B or SP-A plus SP-B films were less than those predicted for a pure squeeze-out mechanism. Surface activity improves during quasi-static or dynamic compression-expansion cycles, indicating the squeeze-out mechanism also occurs. Although SP-C was not as effective as SP-B in promoting selective DPPC adsorption, this protein is more effective in promoting the reinsertion of lipids forced out of the surface monolayer following overcompression at low gamma values. Addition of SP-A to samples containing SP-B but not SP-C limits the increase in gamma(max) during expansion. It is concluded that the surfactant apoproteins possess distinct overlapping functions. SP-B is effective in selective DPPC insertion during monolayer formation and in PG squeeze-out during monolayer compression. SP-A can promote adsorption during film formation, particularly in the presence of SP-B. SP-C appears to have a superior role to SP-B in formation of the surfactant reservoir and in reinsertion of collapse phase lipids.     

Effects of pulmonary surfactant proteins SP-B and SP-C and calcium ions on the surface properties of hydrophobic fractions of lung surfactant

This study focused on two hydrophobic fractions (HF-A and HF-B) isolated from porcine lung surfactant (LS) that had similar phospholipid composition, but HF-A consisted of the hydrophobic LS specific proteins (SP-B and SP-C), in contrast to HF-B. Monolayers spread in a Langmuir trough were formed at the air/water interface of both fractions and the rate of adsorption-desorption and the respreading potential of the LS constituents was studied during six consecutive compression/decompression cycles of the monolayers. By drawing a comparison between the behavior of HF-A and HF-B monolayers on the subphase of 150 mm NaCl, either with or without additional Ca²⁺, we estimated the role of hydrophobic LS proteins and Ca²⁺ ions for LS surface activity. The results demonstrated much higher ability of the HF-A sample, compared to HF-B, to maintain lower surface tension (γ) during monolayer compression and its better respreading capacity during decompression. For instance, at a surface concentration corresponding to 80 Ų per phospholipid molecule, the HF-A monolayers showed a much lower γ _max value (surface tension at 100% of the trough area), being ca. 31.0 mN/m, compared to the HF-B monolayers (γ _max? 62.0 mN/m). The surface tension after compression to 20% of the initial area (γ _min) reached ca. 7.0 and 19.0 mN/m in the HF-A and HF-B monolayers, respectively. Better respreading of the HF-A monolayers compared to the HF-B monolayers was due to the faster adsorption and spreading of LS phospholipids during decompression, facilitated by the hydrophobic proteins. As the phospholipid composition of both fractions was similar, we showed that the hydrophobic surfactant proteins were responsible also for the prevention of the irreversible loss of material from the surface during monolayer compression/decompression. The effects observed demonstrated also that the hydrophobic surfactant proteins were the stronger determinant, compared with Ca²⁺ ions, for the surface tension decrease and respreading of the monolayers during film compression/decompression. For instance, when the HF-A monolayers were spread on a subphase with an additional 5 mm Ca²⁺ ion content, no significant changes were detected in the γ _min and γ _max values between the first and sixth cycle, compared to the monolayers spread on a subphase of 150 mm NaCl only. However, in the absence of positively charged SP-B and SP-C (HF-B sample) in highly compressed monolayers, Ca²⁺ ions were able to cause the effects shown by SP-B and SP-C, although to a less extent. The role of the electrostatic and hydrophobic interactions is discussed for the better respreading of LS components in the presence of LS proteins and Ca²⁺ ions.     

Monolayer–multilayer transitions in a lung surfactant model: IR reflection–absorption spectroscopy and atomic force microscopy

A hydrophobic pulmonary surfactant protein, SP-C, has been implicated in surface-associated activities thought to facilitate the work of breathing. Model surfactant films composed of lipids and SP-C display a reversible transition from a monolayer to surface-associated multilayers upon compression and expansion at the air/water (A/W) interface. The molecular-level mechanics of this process are not yet fully understood. The current work uses atomic force microscopy on Langmuir–Blodgett films to verify the formation of multilayers in a dipalmitoylphosphatidylcholine, dipalmitoylphosphatidylglycerol, cholesterol, and SP-C model system. Isotherms of SP-C-containing films are consistent with exclusion and essentially complete respreading during compression and expansion, respectively. Multilayer formation was not detected in the absence of SP-C. Most notable are the results from IR reflection–absorption spectroscopy (IRRAS) conducted at the A/W interface, where the position and intensity of the Amide I band of SP-C reveal that the predominantly helical structure changes its orientation in monolayers versus multilayers. IRRAS measurements indicate that the helix tilt angle changed from approximately 80° in monolayers to a transmembrane orientation in multilayers. The results constitute the first quantitative measure of helix orientation in mixed monolayer/multilamellar domains at the A/W interface and provide insight into the molecular mechanism for SP-C-facilitated respreading of surfactant.     

Pulmonary surfactant in birds: coping with surface tension in a tubular lung

As birds have tubular lungs that do not contain alveoli, avian surfactant predominantly functions to maintain airflow in tubes rather than to prevent alveolar collapse. Consequently, we have evaluated structural, biochemical, and functional parameters of avian surfactant as a model for airway surfactant in the mammalian lung. Surfactant was isolated from duck, chicken, and pig lung lavage fluid by differential centrifugation. Electron microscopy revealed a uniform surfactant layer within the air capillaries of the bird lungs, and there was no tubular myelin in purified avian surfactants. Phosphatidylcholine molecular species of the various surfactants were measured by HPLC. Compared with pig surfactant, both bird surfactants were enriched in dipalmitoylphosphatidylcholine, the principle surface tension-lowering agent in surfactant, and depleted in palmitoylmyristoylphosphatidylcholine, the other disaturated phosphatidylcholine of mammalian surfactant. Surfactant protein (SP)-A was determined by immunoblot analysis, and SP-B and SP-C were determined by gel-filtration HPLC. Neither SP-A nor SP-C was detectable in either bird surfactant, but both preparations of surfactant contained SP-B. Surface tension function was determined using both the pulsating bubble surfactometer (PBS) and capillary surfactometer (CS). Under dynamic cycling conditions, where pig surfactant readily reached minimal surface tension values below 5 mN/m, neither avian surfactant reached values below 15 mN/m within 10 pulsations. However, maximal surface tension of avian surfactant was lower than that of porcine surfactant, and all surfactants were equally efficient in the CS. We conclude that a surfactant composed primarily of dipalmitoylphosphatidylcholine and SP-B is adequate to maintain patency of the air capillaries of the bird lung.     

Effects of cholesterol on surface activity and surface topography of spread surfactant films

Pulmonary surfactant forms a monolayer of lipids and proteins at the alveolar air/liquid interface. Although cholesterol is a natural component of surfactant, its function in surface dynamics is unclear. To further elucidate the role of cholesterol in surfactant, we used a captive bubble surfactometer (CBS) to measure surface activity of spread films containing dipalmitoylphosphatidylcholine/1-palmitoyl-2-oleoylphosphatidylcholine/1-palmitoyl-2-oleoylphosphatidylglycerol (DPPC/POPC/POPG, 50/30/20 molar percentages), surfactant protein B (SP-B, 0.75 mol %), and/or surfactant protein C (SP-C, 3 mol %) with up to 20 mol % cholesterol. A cholesterol concentration of 10 mol % was optimal for reaching and maintaining low surface tensions in SP-B-containing films but led to an increase in maximum surface tension in films containing SP-C. No effect of cholesterol on surface activity was found in films containing both SP-B and SP-C. Atomic force microscopy (AFM) was used, for the first time, to visualize the effect of cholesterol on topography of SP-B- and/or SP-C-containing films compressed to a surface tension of 22 mN/m. The protrusions found in the presence of cholesterol were homogeneously dispersed over the film, whereas in the absence of cholesterol the protrusions tended to be more clustered into network structures. A more homogeneous dispersion of surfactant lipid components may facilitate lipid insertion into the surfactant monolayer. Our data provide additional evidence that natural surfactant, containing SP-B and SP-C, is superior to surfactants lacking one of the components, and furthermore, this raises the possibility that the cholesterol found in surfactant of warm-blooded mammals does not have a function in surface activity.