Determination of gene copy number and genotype of transgenic Arabidopsis thaliana by competitive PCR

A simple and rapid method is described for determining the integrated T-DNA copy number and the genotype in transgenic Arabidopsis thaliana by two-step competitive PCR. First, the amount of genomic DNA in the extracts, obtained from an individual A. thaliana transformant, was accurately determined by the 1st competitive PCR using a known single copy gene, 4HPPD (4-hydroxyphenylpyruvate dioxygenase), as a target. Second, the number of T-DNA copies per genome was estimated by quantifying the NPTII gene, which was involved in the T-DNA, by the 2nd competitive PCR using exactly the same amount of genomic DNA for each sample. The estimated copy number and genotype obtained by this procedure were identical to those determined by Southern blot analysis and segregation analysis.     

Calibration-curve-free quantitative PCR: a quantitative method for specific nucleic acid sequences without using calibration curves

We have developed a simple quantitative method for specific nucleic acid sequences without using calibration curves. This method is based on the combined use of competitive polymerase chain reaction (PCR) and fluorescence quenching. We amplified a gene of interest (target) from DNA samples and an internal standard (competitor) with a sequence-specific fluorescent probe using PCR and measured the fluorescence intensities before and after PCR. The fluorescence of the probe is quenched on hybridization with the target by guanine bases, whereas the fluorescence is not quenched on hybridization with the competitor. Therefore, quench rate (i.e., fluorescence intensity after PCR divided by fluorescence intensity before PCR) is always proportional to the ratio of the target to the competitor. Consequently, we can calculate the ratio from quench rate without using a calibration curve and then calculate the initial copy number of the target from the ratio and the initial copy number of the competitor. We successfully quantified the copy number of a recombinant DNA of genetically modified (GM) soybean and estimated the GM soybean contents. This method will be particularly useful for rapid field tests of the specific gene contamination in samples.     

Quantitative analysis of total mitochondrial DNA: competitive polymerase chain reaction versus real-time polymerase chain reaction

An efficient and effective method for quantification of small amounts of nucleic acids contained within a sample specimen would be an important diagnostic tool for determining the content of mitochondrial DNA (mtDNA) in situations where the depletion thereof may be a contributing factor to the exhibited pathology phenotype. This study compares two quantification assays for calculating the total mtDNA molecule number per nanogram of total genomic DNA isolated from human blood, through the amplification of a 613-bp region on the mtDNA molecule. In one case, the mtDNA copy number was calculated by standard competitive polymerase chain reaction (PCR) technique that involves co-amplification of target DNA with various dilutions of a nonhomologous internal competitor that has the same primer binding sites as the target sequence, and subsequent determination of an equivalence point of target and competitor concentrations. In the second method, the calculation of copy number involved extrapolation from the fluorescence versus copy number standard curve generated by real-time PCR using various dilutions of the target amplicon sequence. While the mtDNA copy number was comparable using the two methods (4.92 +/- 1.01 x 10(4) molecules/ng total genomic DNA using competitive PCR vs 4.90 +/- 0.84 x 10(4) molecules/ng total genomic DNA using real-time PCR), both inter- and intraexperimental variance were significantly lower using the real-time PCR analysis. On the basis of reproducibility, assay complexity, and overall efficiency, including the time requirement and number of PCR reactions necessary for the analysis of a single sample, we recommend the real-time PCR quantification method described here, as its versatility and effectiveness will undoubtedly be of great use in various kinds of research related to mitochondrial DNA damage- and depletion-associated disorders.     

Determination of Transgene Copy Number in Stably Transfected Mammalian Cells by PCR-Capillary Electrophoresis Assay

The quantitative determination of transgene copy number in stably transfected mammalian cells has been traditionally estimated by Southern blot analysis. Recently, other methods have become available for appraisal of gene copy number, such as real-time PCR. Herein we describe a new method based on a fluorescently labeled PCR, followed by capillary electrophoresis. We amplified our target gene (prothrombin) and the internal control originating from genomic DNA (18S rRNA) in the same PCR tube and calculated the mean peak height ratio of the target:control gene for every cell clone sample. With this approach we identified stably transfected cell clones bearing the same transgene copy number. The results of our assay were confirmed by real-time PCR. Our method proves to be fast, low-cost, and reproducible compared with traditionally used methods. This assay can be used as a rapid screening tool for the determination of gene copy number in gene expression experiments.     

Detection of differential gene copy number using denaturing high performance liquid chromatography

Genomic rearrangements leading to deletion or duplication of gene(s) resulting in alterations in gene copy number underlie the molecular lesion in several genetic disorders. Methods currently used to determine gene copy number including real time PCR, southern hybridization, fluorescence in situ hybridization, densitometric scanning of PCR product etc. have certain disadvantages and are also expensive and time consuming. Herein, we describe a simple and rapid method to assess gene copy number using denaturing high performance liquid chromatography (dHPLC). We used X chromosome genes as model to compare the gene copy numbers present on this chromosome in males and females. DNA from these samples were amplified by biplex PCR using primer pairs specific for X chromosome genes only (target gene) and for genes present on both X and Y chromosomes (internal control). Amplified products were analyzed using HPLC under non-denaturing conditions. The ratio of peak areas (target gene/internal control) of the amplified products was approximately twice in female samples than male samples (p < 0.001) demonstrating that the differential gene copy number can be easily detected using this method. This method can potentially be used for diagnostic purpose where the need is to distinguish samples based on the differential gene copy numbers.     

Quantification of the carbazole 1,9a-dioxygenase gene by real-time competitive PCR combined with co-extraction of internal standards

The fluorogenic probe assay, competitive polymerase chain reaction (PCR) and co-extraction with internal standard cells were combined to develop a rapid, sensitive, and accurate quantification method for the copy number of a target carbazole 1,9a-dioxygenase gene (carAa) and the cell number of Pseudomonas sp. strain CA10. The internal standard DNA was modified by replacement of a 20-bp long region with one for binding a specific probe in fluorogenic PCR (TaqMan). The resultant DNA fragment was similar to the corresponding region of the intact carAa gene in terms of G+C content. When used as a competitor in the PCR reaction, the internal standard DNA was distinguishable from the target carAa gene by two specific fluorogenic probes with different fluorescence labels, and was automatically detected in a single tube using the ABI7700 sequence detection system. To minimize variations in the efficiency of cell lysis and DNA extraction between the samples, the co-extraction method was combined. A mini-transposon was used to introduce competitor DNA into the genome of other pseudomonads, and the resultant construct was used as the standard cell. After the addition of a fixed amount of the internal standard cells to soil samples, total DNA was extracted (co-extraction). Using this method, the copy number of the carAa gene and the cell number of strain CA10 in soil samples could be quantified rapidly.     

Theoretical and experimental dissection of competitive PCR for accurate quantification of DNA

We frequently use competitive PCR in the plateau phase in quantifying DNA species with a small number of cells. However, the basic issues of this method are poorly understood. Here, first we analyze this method theoretically under a generalized condition that competitor and target DNA products accumulate with different amplification efficiencies. We show a theoretical reason that competitive PCR might quantify DNA more accurately during the plateau phase than during the exponential phase. Second, we demonstrate that the theoretical predictions are supported by the experimental results of beta-globin gene amplification using the lysates of human diploid fibroblast WS1 cells. We also demonstrate that we can correctly quantify target DNA by keeping the starting concentration of target DNA close to a constant preset value while using a constant number of PCR cycles and by using WS1 cells as control. Finally, we show the experimental errors in routine measurements of c-myc copy number/cell in human leukemia HL-60 cells with various levels of c-myc multiplication. The number of c-myc copies/cell was determined with an error rate of less than 10%, where agarose gel bands were stained with ethidium bromide for the product quantitation.     

基于数字PCR的单分子DNA定量技术研究进展

数字PCR是一项针对单分子目标DNA的绝对定量技术．该技术是将含有DNA模板的反应溶液分配到大量独立的反应室中并且发生扩增反应,通过统计反应室中的阳性信号来定量DNA的拷贝数．DNA样品在反应室中随机和独立分布是单分子成功扩增和准确定量DNA拷贝数的关键因素．本文综述了数字PCR的发展历史、数字PCR与实时荧光定量PCR的区别,以及数字PCR在临床诊断、转基因成分定量、单细胞基因表达、环境微生物检测和下一代测序等方面的最新进展,并展望了该技术的应用前景．     

A novel multiplex fluorescent competitive PCR for copy number variation detection

The copy number variation (CNV) is an important genetic marker in cancer and other diseases. To detect CNVs of specific genetic loci, the multiplex ligation-dependent probe amplification (MLPA) is an appropriate approach, but the experimental optimization and probe synthesis are still great challenges. The multiplex competitive PCR is an alternative method for CNV detection. However, the construction of internal competitive template and establishment of a stable multiplex PCR system are the main limiting factors for this method. Here, we introduce a novel multiplex fluorescent competitive PCR (NMFC-PCR) for detecting CNVs. In this method, the blunt hairpin primers are used to rapidly establish a stable multiplex PCR system due to the reduction of non-specific amplification, and limited cycles' amplification is used to obtain the internal competitive template instead of artificial synthesis. With this method, we tested 21 clinical samples with potential LIM homeobox 1 (LHX1) or T-box 6 (TBX6) deletion. Every three segments located on the LHX1 and TBX6 were selected as the target regions, while two segments located on X-chromosome and five segments located on autosome were selected as the reference regions for detecting CNVs. The results showed that the gender information of 21 samples can be accurately inferred by the copy number ratio (CNR) of X-chromosomal reference region to autosomal reference region (X/A), and 2 samples had one copy of LHX1 and 9 samples had one copy of TBX6. To evaluate the accuracy of NMFC-PCR, 5 random samples with CNV were also detected by array-based comparative genomic hybridization (aCGH), and the results of aCGH were consistent with the NMFC-PCR results. To further assess the performance of NMFC-PCR, 60 normal samples were simultaneously tested. The results showed that the gender results were exactly the same as known information, and CNVs of LHX1 or TBX6 were not found. In conclusion, the method is a cheap, efficient, accurate, and convenient competitive PCR method for CNV detection.     

Comparison of droplet digital PCR with quantitative real-time PCR for determination of zygosity in transgenic maize

This study evaluated the applicability of droplet digital PCR (ddPCR) as a tool for maize zygosity determination using quantitative real-time PCR (qPCR) as a reference technology. Quantitative real-time PCR is commonly used to determine transgene copy number or GMO zygosity characterization. However, its effectiveness is based on identical reaction efficiencies for the transgene and the endogenous reference gene. Additionally, a calibrator sample should be utilized for accuracy. Droplet digital PCR is a DNA molecule counting technique that directly counts the absolute number of target and reference DNA molecules in a sample, independent of assay efficiency or external calibrators. The zygosity of the transgene can be easily determined using the ratio of the quantity of the target gene to the reference single copy endogenous gene. In this study, both the qPCR and ddPCR methods were used to determine insect-resistant transgenic maize IE034 zygosity. Both methods performed well, but the ddPCR method was more convenient because of its absolute quantification property.     

Analysis of copy number variation using quantitative interspecies competitive PCR

Over recent years small submicroscopic DNA copy-number variants (CNVs) have been highlighted as an important source of variation in the human genome, human phenotypic diversity and disease susceptibility. Consequently, there is a pressing need for the development of methods that allow the efficient, accurate and cheap measurement of genomic copy number polymorphisms in clinical cohorts. We have developed a simple competitive PCR based method to determine DNA copy number which uses the entire genome of a single chimpanzee as a competitor thus eliminating the requirement for competitive sequences to be synthesized for each assay. This results in the requirement for only a single reference sample for all assays and dramatically increases the potential for large numbers of loci to be analysed in multiplex. In this study we establish proof of concept by accurately detecting previously characterized mutations at the PARK2 locus and then demonstrating the potential of quantitative interspecies competitive PCR (qicPCR) to accurately genotype CNVs in association studies by analysing chromosome 22q11 deletions in a sample of previously characterized patients and normal controls.     

A proportional analysis method using non-kinetic real-time PCR

Prompted by increasing interest in proportional analysis of genetic types, we developed a simple assay technique for determining the ratio of a specific target gene in the total genes that can be amplified with the same PCR primer. The key feature of this method is that the following two tasks are performed in a single-tube real-time PCR system: task 1, PCR amplification of the total genes including the target using a labeled PCR primer, with concurrent monitoring of the total copy number of the PCR product; task 2, detection of the signal of the target gene at each cycle of amplification, using a labeled nucleotide probe. In principle, the ratio of the target gene to the total genes is represented by the signal detected in 'task 2' at the cycle in which the PCR product reached a prescribed copy number (assessed by 'task 1').     

Accurate Determination of Zygosity in Transgenic Rice by Real-time PCR Does Not Require Standard Curves or Efficiency Correction

A number of quantitative, real-time PCR methods have been developed for determining transgene copy numbers in plants. Here, we demonstrate that the Roche LightCycler^TM system can be used to determine the zygosity of transgenic lines without the use of standard curves or efficiency correction calculations. We have developed a duplex PCR assay which permits the determination of zygosity, relative to a calibrator sample, in transgenic rice lines containing the gene for a viral glycoprotein. Our data demonstrate that unambiguous 2-fold discrimination of copy number can be attained by calculating relative copy number using the threshold crossing point (Ct) calculated by the LightCycler^TM software combined with delta delta Ct calculations, provided that the appropriate calibrator sample is included in each run. The method presented here is rapid, sensitive, robust and easy to optimise.     

Accuracy in copy number calling by qPCR and PRT: a matter of DNA

The possible implication of copy number variation (CNV) in the genetic susceptibility to human disease needs to be assessed using robust methods that can be applied at a population scale. In this report, we analyze the performance of the two major techniques, quantitative PCR (qPCR) and paralog ratio test (PRT), and investigate the influence of input DNA amount and template integrity on the reliability of both methods. Analysis of three genes (PRELID1, SYNPO and DEFB4) in a large sample set showed that both methods are prone to false copy number assignments if sufficient attention is not paid to DNA concentration and quality. Accurate normalization of samples is essential for reproducible qPCR because it avoids the effect of differential amplification efficiencies between target and control assays, whereas PRT is generally more sensitive to template degradation due to the fact that longer amplicons are usually needed to optimize sensitivity and specificity of paralog sequence PCR. The use of normalized, high quality genomic DNA yields comparable results with both methods.     

Quantitative real-time PCR as a screening tool for estimating transgene copy number in WHISKERS™-derived transgenic maize

. Quantitative real-time PCR (qRT-PCR) was adapted to estimate transgene copy number in transgenic maize callus and plants. WHISKERS™-derived transgenic callus lines and plants were generated using two different gene constructs. These transgenic materials represented a range of copy number. A 'standard curve' was established by mixing plasmid DNA with non-transgenic genomic maize DNA using a calculated ratio of target gene to host genome size. 'Estimated' copy number in the callus lines and plants using qRT-PCR was correlated with the 'actual' copy number based on Southern blot analysis. The results indicated that there was a significant correlation between the two methods with both gene constructs. Thus, qRT-PCR represents an efficient means of estimating copy number in transgenic maize.     

Potential influence of the first PCR cycles in real-time comparative gene quantifications

There is an underlying assumption in real-time PCR that the amplification efficiency is equal from the first cycles until a signal can be detected. In this study, we evaluated this assumption by analyzing genes with known gene copy number using real-time PCR comparative gene quantifications. Listeria monocytogenes has six 23S rRNA gene copies and one copy of the hlyA gene. We determined 23S rRNA gene copy numbers between 0.9 and 1.6 relative to hlyA when applying the comparative gene quantification approach. This paper focuses on the first cycles of PCR to explain the difference between known and determined gene copy numbers. Both theoretical and experimental evaluations were done. There are three different products (types 1-3) dominating in the first cycles. Type 1 is the original target, type 2 are undefined long products, while type 3 are products that accumulate during PCR. We evaluated the effects of type 1 and 2 products during the first cycles by cutting the target DNA with a restriction enzyme that cuts outside the boundaries of the PCR products. The digestion resulted in a presumed increased amplification efficiency for type 1 and 2 products. Differences in the amplification efficiencies between type 1, 2, and 3 products may explain part of the error in the gene copy number determinations using real-time PCR comparative gene quantifications. Future applications of real-time PCR quantifications should account for the effect of the first few PCR cycles on the conclusions drawn.     

Prenatal diagnosis of tetrasomy 18p using multiplex fluorescent PCR and comparison with a variety of techniques

We report genetic characterization of isochromosome 18p using a combination of cytogenetic and molecular genetic methods, including multiplex fluorescent PCR. The patient was referred for chorionic villus sampling (CVS) due to advanced maternal age and maternal anxiety. The placental karyotype was 47,XX,+mar, with the marker having the appearance of a small supernumerary isochromosome. Because differentiating between isochromosomes and other structural rearrangements is normally very difficult, a variety of genetic tests including fluorescence in situ hybridization (FISH), PCR, and multiplex fluorescent PCR were undertaken to determine chromosomal origin and copy number and, thus, allow accurate diagnosis of the corresponding syndrome. FISH determined that the marker chromosome contained chromosome 18 material. PCR of a variety of short tandem repeats (STRs) confirmed that there was at least one extra copy of the maternal 18p material. However, neither FISH nor PCR could accurately determine copy number. Multiplex fluorescent PCR (MF-PCR) of STRs simultaneously determined that: (1) the marker included 18p material; (2) the marker was maternal in origin; (3) allele copy number indicated tetrasomy; and (4) contamination of the sample could be ruled out. Results were also rapid with accurate diagnosis of the syndrome tetrasomy 18p possible within 5 hours.     

Theoretical uncertainty of measurements using quantitative polymerase chain reaction.

Current quantitative polymerase chain reaction (PCR) protocols are only indicative of the quantity of a target sequence relative to a standard, because no means of estimating the amplification rate is yet available. The variability of PCR performed on isolated cells has already been reported by several authors, but it could not be extensively studied, because of lack of a system for doing kinetic data acquisition and of statistical methods suitable for analyzing this type of data. We used the branching process theory to simulate and analyze quantitative kinetic PCR data. We computed the probability distribution of the offspring of a single molecule. We demonstrated that the rate of amplication has a severe influence on the shape of this distribution. For high values of the amplification rate, the distribution has several maxima of probability. A single amplification trajectory is used to estimate the initial copy number of the target sequence as well as its confidence interval, provided that the amplification is done over more than 20 cycles. The consequence of possible molecular fluctuations in the early stage of amplification is that small copy numbers result in relatively larger intervals than large initial copy numbers. The confidence interval amplitude is the theoretical uncertainty of measurements using quantitative PCR. We expect these results to be applicable to the data produced by the next generation of thermocyclers for quantitative applications.     

多重PCR在质粒拷贝数检测中的应用

聚合酶链式反应(PCR)作为常规分子克隆技术已在分子生物学的各个领域得到广泛应用.然而,多重PCR技术应用于质粒拷贝数检测的研究尚未见报道.为深入探索多重PCR在质粒拷贝数测定中的应用,首先利用构建的多重PCR引物设计及评估体系分别针对细菌基因组DNA和质粒载体DNA序列设计多重PCR引物;然后以转化有不同质粒载体的大...     

Simple and Versatile Molecular Method of Copy-Number Measurement Using Cloned Competitors

Variations and alterations of copy numbers (CNVs and CNAs) carry disease susceptibility and drug responsiveness implications. Although there are many molecular methods to measure copy numbers, sensitivity, reproducibility, cost, and time issues remain. In the present study, we were able to solve those problems utilizing our modified real competitive PCR method with cloned competitors (mrcPCR). First, the mrcPCR for ERBB2 copy number was established, and the results were comparable to current standard methods but with a shorter assay time and a lower cost. Second, the mrcPCR assays for 24 drug-target genes were established, and the results in a panel of NCI-60 cells were comparable to those from real-time PCR and microarray. Third, the mrcPCR results for FCGR3A and the FCGR3B CNVs were comparable to those by the paralog ratio test (PRT), but without PRT''s limitations. These results suggest that mrcPCR is comparable to the currently available standard or the most sensitive methods. In addition, mrcPCR would be invaluable for measurement of CNVs in genes with variants of similar structures, because combination of the other methods is not necessary, along with its other advantages such as short assay time, small sample amount requirement, and applicability to all sequences and genes.