Seeding-dependent propagation and maturation of amyloid fibril conformation

Recent studies of amyloid fibrils have focused on the presence of multiple amyloid forms even with one protein and their propagation by seeding, leading to conformational memory. To establish the structural basis of these critical features of amyloid fibrils, we used the amyloidogenic fragment Ser20-Lys41 (K3) of beta2-microglobulin, a protein responsible for dialysis-related amyloidosis. In 20% (v/v) 2,2,2-trifluoroethanol and 10 mM HCl (pH approximately 2), K3 peptide formed two types of amyloid-like fibrils, f218 and f210, differing in the amount of beta-sheet as measured by circular dichroism spectroscopy and Fourier transform infrared spectroscopy. Atomic force microscopy showed that the fibril with a larger amount of beta-sheet (f210) is thinner and longer. Both fibrils were reproduced by seeding, showing the template-dependent propagation of a fibril's conformation. However, upon repeated self-seeding, f218 fibrils were gradually transformed into f210 fibrils, revealing the conformational maturation. The observed maturation can be explained fully by a competitive propagation of two fibrils. The maturation of amyloid fibrils might play a role during the development of amyloidosis.     

Kinetically controlled thermal response of beta2-microglobulin amyloid fibrils

Calorimetric measurements were carried out using a differential scanning calorimeter in the temperature range from 10 to 120 degrees C for characterizing the thermal response of beta2-microglobulin amyloid fibrils. The thermograms of amyloid fibril solution showed a remarkably large decrease in heat capacity that was essentially released upon the thermal unfolding of the fibrils, in which the magnitude of negative heat capacity change was not explicable in terms of the current accessible surface area model of protein structural thermodynamics. The heat capacity-temperature curve of amyloid fibrils prior to the fibril unfolding exhibited an unusual dependence on the fibril concentration and the heating rate. Particularly, the heat needed to induce the thermal response was found to be linearly dependent on the heating rate, indicating that its thermal response is under a kinetic control and precluding the interpretation in terms of equilibrium thermodynamics. Furthermore, amyloid fibrils of amyloid beta peptides also exhibited a heating rate-dependent exothermic process before the fibril unfolding, indicating that the kinetically controlled thermal response may be a common phenomenon to amyloid fibrils. We suggest that the heating rate-dependent negative change in heat capacity is coupled to the association of amyloid fibrils with characteristic hydration pattern.     

Core and heterogeneity of beta2-microglobulin amyloid fibrils as revealed by H/D exchange

Dialysis-related amyloidosis, which occurs in the patients receiving a long-term hemodialysis with high frequency, accompanies the deposition of amyloid fibrils composed of beta(2)-microglobulin (beta2-m). In vitro, beta2-m forms two kinds of fibrous structures at acidic pH. One is a rigid "mature fibril", and the other is a flexible thin filament often called an "immature fibril". In addition, a 22-residue peptide (K3 peptide) corresponding to Ser20 to Lys41 of intact beta2-m forms rigid amyloid-like fibrils similar to mature fibrils. We compared the core of these three fibrils at single-residue resolution using a recently developed hydrogen/deuterium (H/D) exchange method with the dissolution of fibrils by dimethylsulfoxide (DMSO). The exchange time-course of these fibrils showed large deviations from a single exponential curve showing that, because of the supramolecular structures, the same residue exists in different environments from molecule to molecule, even in a single fibril. The exchange profiles revealed that the core of the immature fibril is restricted to a narrow region compared to that of the mature fibril. In contrast, all residues were protected from exchange in the K3 fibril, indicating that a whole region of the peptide is engaged in the beta-sheet network. These results suggest the mechanism of amyloid fibril formation, in which the core beta-sheet formed by a minimal sequence propagates to form a rigid and extensive beta-sheet network.     

Main-chain dominated amyloid structures demonstrated by the effect of high pressure

It has been suggested that, while the globular native forms of proteins are a side-chain-dominated compact structure evolved by pursuing a unique fold with optimal packing of amino acid residues, amyloid fibrils are a main-chain-dominated structure with an extensive hydrogen bond network. To address this issue, the effects of hydrostatic pressure on amyloid fibrils of beta2-microglobulin (beta2-m), involved in dialysis-related amyloidosis, were studied. A systematic analysis at various pressures and concentrations of guanidine hydrochloride conducted by monitoring thioflavin T fluorescence, light-scattering, and tryptophan fluorescence revealed contrasting conformational changes occurring consecutively: first, a pressure-induced reorganization of fibrils and then a pressure-induced unfolding. The changes in volume as well as the observed structural changes indicate that the beta2-m amyloid fibrils under ambient pressure are less tightly packed with a larger number of cavities, consistent with the main-chain-dominated amyloid structure. Moreover, the amyloid structure without optimal packing will enable various isoforms to form, suggesting the structural basis of multiple forms of amyloid fibrils in contrast to the unique native-fold.     

Seeding-dependent maturation of beta2-microglobulin amyloid fibrils at neutral pH

Beta2-microglobulin (beta2-m) is a major component of amyloid fibrils deposited in patients with dialysis-related amyloidosis. Recent studies have focused on the mechanism by which amyloid fibrils are formed under physiological conditions, which had been difficult to reproduce quantitatively. Yamamoto et al. (Yamamoto, S., Hasegawa, K., Yamaguchi, I., Tsutsumi, S., Kardos, J., Goto, Y., Gejyo, F. & Naiki, H. (2004) Biochemistry 43, 11075-11082) showed that a combination of seed fibrils prepared under acidic conditions and a low concentration of sodium dodecyl sulfate below its critical micelle concentration enabled extensive fibril formation at pH 7.0. Here, we found that repeated self-seeding at pH 7.0 with fibrils formed at the same pH causes a marked acceleration of growth, indicating the maturation of fibrils. The observed maturation can be simulated by assuming the existence of two types of fibrils with different growth rates. Importantly, some mutations of beta2-m or the addition of a low concentration of urea, both destabilizing the native conformation, were not enough to extend the fibrils at pH 7.0, and a low concentration of sodium dodecyl sulfate (i.e. 0.5 mM) was essential. Thus, even though the first stage fibrils in patients are unstable and require stabilizing factors to remain at neutral pH, they can adapt to a neutral pH with repeated self-seeding, implying a mechanism of development of amyloid deposition after a long latent period in patients.     

Structure of interacting segments in the growing amyloid fibril of beta2-microglobulin probed with IR spectroscopy

Inter-segmental interaction at the growing tip of the amyloid fibril of beta2-microglobulin (beta2m) was investigated using IR microscopy. Cross-seeded fibril formation was implemented, in which the amyloid fibril of the #21-31 fragment of beta2m (fA[#21-31]) was generated on the beta2m amyloid fibril (fA[beta2m]) as a seed. Differences between the IR spectra of the cross-seeded fibril and those of the seed were attributed to the contribution from the tip, whose structure is discussed. The results indicated that 6.5 +/- 1.0 out of 11 residues of the fA[#21-31] tip on fA[beta2m] are contained in a beta-sheet at pH 2.5, which was smaller than the corresponding value (7.5 +/- 1.1 residues) of the spontaneous fA[#21-31] at pH 2.5. The tip was suggested to have a planar structure, indicating the planarity of the interacting segment. The N-terminal region of fA[#21-31] in the fibril is more exposed to the solvent than that in the tip, and vice versa for the C-terminal region. This is consistent with the different protonation levels of these regions, and the direction of peptide in the fibrils is determined from these results.     

Thiol compounds inhibit the formation of amyloid fibrils by beta 2-microglobulin at neutral pH

Dialysis-related amyloidosis frequently develops in patients undergoing long-term hemodialysis, in which the major component of fibrils is β₂-microglobulin (β2-m). To prevent the disease, it is important to stop the formation of fibrils. β2-m has one disulfide bond, which stabilizes the native structure, and amyloid fibrils. Here, the effects of reductants (i.e., dithiothreitol and cysteine) on the formation of β2-m amyloid fibrils were examined at neutral pH. Fibrils were generated by three methods: seed-dependent, ultrasonication-induced, and salt-and-heat-induced fibrillation. Thioflavin T fluorescence, electron microscopy, and far-UV circular dichroism revealed that the addition of reductants significantly inhibits seed-dependent and ultrasonication-induced fibrillation. For salt-and-heat-induced fibrillation, where the solution of β2-m was strongly agitated, formation of amyloid fibrils was markedly reduced in the presence of reductants, although a small number of fibrils formed even after the reduction of the disulfide bond. The results suggest that reductants such as cysteine and dithiothreitol would be useful for preventing the formation of β2-m amyloid fibrils under physiological conditions.     

Topological investigation of amyloid fibrils obtained from beta2-microglobulin

Amyloid fibrils of patients treated with regular hemodialysis essentially consists of beta2-microglobulin (beta2-m) and its truncated species DeltaN6beta2-m lacking six residues at the amino terminus. The truncated fragment has a more flexible three-dimensional structure and constitutes an excellent candidate for the analysis of a protein in the amyloidogenic conformation. The surface topology of synthetic fibrils obtained from intact beta2-m and truncated DeltaN6beta2-m was investigated by the limited proteolysis/mass spectrometry approach that appeared particularly suited to gain insights into the structure of beta2-m within the fibrillar polymer. The distribution of prefential proteolytic sites observed in both fibrils revealed that the central region of the protein, which had been easily cleaved in the full-length globular beta2-m, was fully protected in the fibrillar form. In addition, the amino- and carboxy-terminal regions of beta2-m became exposed to the solvent in the fibrils, whereas they were masked completely in the native protein. These data indicate that beta2-m molecules in the fibrils consist of an unaccessible core comprising residues 20-87 with the strands I and VIII being not constrained in the fibrillar polymer and exposed to the proteases. Moreover, proteolytic cleavages observed in vitro at Lys 6 and Lys 19 reproduce specific cleavages that have to occur in vivo to generate the truncated forms of beta2-m occurring in natural fibrils. On the basis of these data, a possible mechanism for fibril formation from native beta2-m is discussed and an explanation for the occurrence of truncated protein species in natural fibrils is given.     

Heat-induced conversion of beta(2)-microglobulin and hen egg-white lysozyme into amyloid fibrils

Thermodynamic parameters characterizing protein stability can be obtained for a fully reversible folding/unfolding system directly by differential scanning calorimetry (DSC). However, the reversible DSC profile can be altered by an irreversible step causing aggregation. Here, to obtain insight into amyloid fibrils, ordered and fibrillar aggregates responsible for various amyloidoses, we studied the effects on human beta(2)-microglobulin and hen egg-white lysozyme of a combination of agitation and heating. Aggregates formed by mildly agitating protein solutions in the native state in the presence of NaCl were heated in the cell of the DSC instrument. For beta(2)-microglobulin, with an increase in the concentration of NaCl at neutral pH, the thermogram began to show an exothermic transition accompanied by a large decrease in heat capacity, followed by a kinetically controlled thermal response. Similarly, the aggregated lysozyme at a high concentration of NaCl revealed a similar distinct transition in the DSC thermogram over a wide pH range. Electron microscopy demonstrated the conformational change into amyloid fibrils. Taken together, the combined use of agitation and heating is a powerful way to generate amyloid fibrils from two proteins, beta(2)-microglobulin and hen egg-white lysozyme, and to evaluate the effects of heat on fibrillation, in which the heat capacity is crucial to characterizing the transition.     

Role of the N and C-terminal strands of beta 2-microglobulin in amyloid formation at neutral pH

Beta 2-microglobulin (beta(2)m) is known to form amyloid fibrils de novo in vitro under acidic conditions (below pH 4.8). Fibril formation at neutral pH, however, has only been observed by deletion of the N-terminal six residues; by the addition of pre-assembled seeds; or in the presence of Cu(2+). Based on these observations, and other structural data, models for fibril formation of beta(2)m have been proposed that involve the fraying of the N and C-terminal beta-strands and the consequent loss of edge strand protective features. Here, we examine the role of the N and C-terminal strands in the initiation of fibrillogenesis of beta(2)m by creating point mutations in strands A and G and comparing the properties of the resulting proteins with variants containing similar mutations elsewhere in the protein. We show that truncation of buried hydrophobic side-chains in strands A and G promotes rapid fibril formation at neutral pH, even in unseeded reactions, and increases the rate of fibril formation under acidic conditions. By contrast, similar mutations created in the remaining seven beta-strands of the native protein have little effect on the rate or pH dependence of fibril formation. The data are consistent with the view that perturbation of the N and C-terminal edge strands is an important feature in the generation of assembly-competent states of beta(2)m.     

Conformational stability of amyloid fibrils of beta2-microglobulin probed by guanidine-hydrochloride-induced unfolding

Although the stability of globular proteins has been studied extensively, that of amyloid fibrils is scarcely characterized. Beta2-microglobulin (beta2-m) is a major component of the amyloid fibrils observed in patients with dialysis-related amyloidosis. We studied the effects of guanidine hydrochloride on the amyloid fibrils of beta2-m, revealing a cooperative unfolding transition similar to that of the native state. The stability of amyloid fibrils increased on the addition of ammonium sulfate, consistent with a role of hydrophobic interactions. The results indicate that the analysis of unfolding transition is useful to obtain insight into the structural stability of amyloid fibrils.     

Mechanism by which the amyloid-like fibrils of a beta 2-microglobulin fragment are induced by fluorine-substituted alcohols

Although the formation of an alpha-helix or partial unfolding of proteins has been suggested to be important for amyloid fibrils to form in alcohols, the exact mechanism involved remains elusive. To obtain further insight into the development of amyloid fibrils, we used a 22-residue peptide, K3, corresponding to Ser20 to Lys41 of intact beta2-microglobulin. Although K3 formed an alpha-helix at high concentrations of 2,2,2-trifluoroethanol (TFE) and 1,1,1,3,3,3-hexafluoroisopropanol (HFIP) in 10 mM HCl (pH approximately 2), the helical content was not high, indicating a low preference to do so. The partly alpha-helical conformation was converted with time into a highly ordered beta-sheet with a fibrillar morphology as revealed by atomic force microscopy. Importantly, the TFE and HFIP-induced fibrillation exhibited a concentration dependence with a maximum at approximately 20 and approximately 10% (v/v), respectively, slightly below the concentrations at which these alcohols form dynamic clusters. Focusing on the similarity of the effects of alcohol on proteins with those of sodium dodecyl sulfate (SDS), we examined the effects of SDS on K3. SDS also induced fibrils to form with a maximum at approximately 4 mM, slightly below the critical micelle concentration. These results indicate that, with an increase in the concentration of hydrophobic cosolvent (TFE, HFIP, or SDS), a delicate balance of decreasing hydrophobic interactions and increasing polar interactions (i.e. H-bonds) in and between peptides leads to the formation of ordered fibrils with a bell-shaped concentration dependence.     

A systematic investigation into the effect of protein destabilisation on beta 2-microglobulin amyloid formation

Beta-2-microglobulin (beta(2)m) has been shown to form amyloid fibrils with distinct morphologies under acidic conditions in vitro. Short, curved fibrils (<600 nm in length), form rapidly without a lag phase, with a maximum rate at pH 3.5. By contrast, fibrils with a long (approximately 1 microm), straight morphology are produced by incubation of the protein at pH< or =3.0. Both fibril types display Congo red birefringence, bind Thioflavin-T and have X-ray fibre diffraction patterns consistent with a cross-beta structure. In order to investigate the role of different partially folded states in generating fibrils of each type, and to probe the effect of protein stability on amyloid formation, we have undertaken a detailed mutagenesis study of beta(2)m. Thirteen variants containing point mutations in different regions of the native protein were created and their structure, stability and fibril forming propensities were investigated as a function of pH. By altering the stability of the native protein in this manner, we show that whilst destabilisation of the native state is important in the generation of amyloid fibrils, population of specific denatured states is a pre-requisite for amyloid formation from this protein. Moreover, we demonstrate that the formation of fibrils with different morphologies in vitro correlates with the relative population of different precursor states.     

Association of MR1 protein, an MHC class I-related molecule, with beta(2)-microglobulin.

MR1 is a major histocompatibility complex (MHC) class I-related gene conserved among mammals, and its predicted amino acid sequence is relatively closer to the classical MHC class I molecules among several divergent class I molecules. However, as its molecular nature and function have not yet been clarified, we set out in this study to establish transfected P388 murine cell lines that stably produce a large number of MR1 proteins and conducted analyses to investigate the molecular nature of MR1. Immunoprecipitation and Western blot analyses with specific antisera revealed that the MR1 protein can associate with beta(2)-microglobulin, suggesting its molecular form of a typical class I heterodimer composed of a heavy and a light chain (beta(2)-microglobulin), like the classical MHC class I molecules.     

Strong acids induce amyloid fibril formation of β2-microglobulin via an anion-binding mechanism

Amyloid fibrils, crystal-like fibrillar aggregates of proteins associated with various amyloidoses, have the potential to propagate via a prion-like mechanism. Among known methodologies to dissolve preformed amyloid fibrils, acid treatment has been used with the expectation that the acids will degrade amyloid fibrils similar to acid inactivation of protein functions. Contrary to our expectation, treatment with strong acids, such as HCl or H₂SO₄, of β₂-microglobulin (β2m) or insulin actually promoted amyloid fibril formation, proportionally to the concentration of acid used. A similar promotion was observed at pH 2.0 upon the addition of salts, such as NaCl or Na₂SO₄. Although trichloroacetic acid, another strong acid, promoted amyloid fibril formation of β2m, formic acid, a weak acid, did not, suggesting the dominant role of anions in promoting fibril formation of this protein. Comparison of the effects of acids and salts confirmed the critical role of anions, indicating that strong acids likely induce amyloid fibril formation via an anion-binding mechanism. The results suggest that although the addition of strong acids decreases pH, it is not useful for degrading amyloid fibrils, but rather induces or stabilizes amyloid fibrils via an anion-binding mechanism.     

Structural basis of the differential stability and receptor specificity of H-2Db in complex with murine versus human beta2-microglobulin

beta(2)-Microglobulin (beta(2)m) is non-covalently linked to the major histocompatibility complex (MHC) class I heavy chain and interacts with CD8 and Ly49 receptors. Murine MHC class I heavy chains can bind human beta(2)m (hbeta(2)m) and peptide, and such hybrid molecules are often used in structural and functional studies. The replacement of mouse beta(2)m (mbeta(2)m) with hbeta(2)m has several functional consequences for MHC class I complex stability and specificity, but the structural basis for this is presently unknown. To investigate the impact of species-specific beta(2)m subunits on MHC class I conformation, we provide a crystallographic comparison of H-2D(b) in complex with LCMV-derived gp33 peptide and either hbeta(2)m or mbeta(2)m. The conformation of the gp33 peptide is not affected by the beta(2)m species. Comparison of the interface between beta(2)m and the alpha(1)alpha(2) domains of the heavy chain in these two crystal structures reveals a marked increase in both polarity and number of hydrogen bonds between hbeta(2)m and the alpha(1)alpha(2) domains of H-2D(b). We propose that the positioning of two hydrogen bond rich regions at the hbeta(2)m/alpha(1)alpha(2) interface plays a central role in the increased overall stability and peptide exchange capacity in the H-2D(b)/hbeta(2)m complex. These two regions act as bridges, holding and stabilizing the underside of the alpha(1) and alpha(2) helices, enabling a prolonged peptide-receptive conformation of the peptide binding cleft. Furthermore, analysis of H-2D(b) in complex with either mbeta(2)m or hbeta(2)m provides a structural explanation for the differential binding of H-2D(b)/hbeta(2)m to both Ly49A and Ly49C. Our comparative structural study emphasizes the importance of beta(2)m residues at positions 3, 6 and 29 for binding to Ly49A and suggests that sterical hindrance by residue K6 on hbeta(2)m impairs the recognition of Ly49C by H-2D(b)/gp33/hbeta(2)m. Finally, comparison of the two H-2D(b) crystal structures implies that the beta(2)m species may affect the strength of TCR recognition by affecting CD8 binding.     

Lysine 58-cleaved beta2-microglobulin is not detectable by 2D electrophoresis in ex vivo amyloid fibrils of two patients affected by dialysis-related amyloidosis

The lysine 58 cleaved and truncated variant of beta(2)-microglobulin (DeltaK58-beta2m) is conformationally unstable and present in the circulation of a large percentage of patients on chronic hemodialysis, suggesting that it could play a role in the beta2-microglobulin (beta2m) amyloid fibrillogenesis associated with dialysis-related amyloidosis (DRA). However, it has yet to be detected in the amyloid deposits of such patients. Here, we extracted amyloid fibrils, without denaturation or additional purification, from different amyloidotic tissues of two unrelated individuals suffering from DRA, and characterized them by high-sensitivity bidimensional gel electrophoresis (2D-PAGE), immunoblotting, MALDI time-of-flight mass spectrometry, and protein sequencing. To confirm whether or not this species could be identified by our proteomic approaches, we mapped its location in 2D-PAGE, in mixtures of pure DeltaK58-beta2m, and extracts of amyloid fibrils from patients, to a discrete region of the gel distinct from other isoforms of beta2m. Using this approach, the two known principal isoforms found in beta2m amyloid were identified, namely, the full-length protein and the truncated species lacking six N-terminal amino acid residues (DeltaN6-beta2m). In contrast, we found no evidence for the presence of DeltaK58-beta2m.     

The controlling roles of Trp60 and Trp95 in beta2-microglobulin function, folding and amyloid aggregation properties

Amyloidosis associated to hemodialysis is caused by persistently high β₂-microglobulin (β₂m) serum levels. β₂m is an intrinsically amyloidogenic protein whose capacity to assemble into amyloid fibrils in vitro and in vivo is concentration dependent; no β₂m genetic variant is known in the human population. We investigated the roles of two evolutionary conserved Trp residues in relation to β₂m structure, function and folding/misfolding by means of a combined biophysical and functional approach. We show that Trp60 plays a functional role in promoting the association of β₂m in class I major histocompatibility complex; it is exposed to the solvent at the apex of a protein loop in order to accomplish such function. The Trp60 → Gly mutation has a threefold effect: it stabilizes β₂m, inhibits β₂m amyloidogenic propensity and weakens the interaction with the class I major histocompatibility complex heavy chain. On the contrary, Trp95 is buried in the β₂m core; the Trp95 → Gly mutation destabilizes the protein, which is unfolded in solution, yielding nonfibrillar β₂m aggregates. Trp60 and Trp95 therefore play differential and complementary roles in β₂m, being relevant for function (Trp60) and for maintenance of a properly folded structure (Trp95) while affecting in distinct ways the intrinsic propensity of wild-type β₂m towards self-aggregation into amyloid fibrils.     

Competing pathways determine fibril morphology in the self-assembly of beta2-microglobulin into amyloid

Despite its importance in biological phenomena, a comprehensive understanding of the mechanism of amyloid formation remains elusive. Here, we use atomic force microscopy to map the formation of beta2-microglobulin amyloid fibrils with distinct morphologies and persistence lengths, when protein concentration, pH and ionic strength are varied. Using the resulting state-diagrams, we demonstrate the existence of two distinct competitive pathways of assembly, which define an energy landscape that rationalises the sensitivity of fibril morphology on the solution conditions. Importantly, we show that semi-flexible (worm-like) fibrils, which form rapidly during assembly, are kinetically trapped species, formed via a non-nucleated pathway that is explicitly distinct from that leading to the formation of the relatively rigid long-straight fibrils classically associated with amyloid. These semi-flexible fibrils also share an antibody epitope common to other protein oligomers that are known to be toxic species linked to human disease. The results demonstrate the heterogeneity of amyloid assembly, and have important implications for our understanding of the importance of oligomeric states in amyloid disease, the origins of prion strains, and the development of therapeutic strategies.     

The solution structure of human beta2-microglobulin reveals the prodromes of its amyloid transition

The solution structure of human beta2-microglobulin (beta2-m), the nonpolymorphic component of class I major histocompatibility complex (MHC-I), was determined by (1)H NMR spectroscopy and restrained modeling calculations. Compared to previous structural data obtained from the NMR secondary structure of the isolated protein and the crystal structure of MHC-I, in which the protein is associated to the heavy-chain component, several differences are observed. The most important rearrangements were observed for (1) strands V and VI (loss of the C-terminal and N-terminal end, respectively), (2) interstrand loop V-VI, and (3) strand I, including the N-terminal segment (displacement outward of the molecular core). These modifications can be considered as the prodromes of the amyloid transition. Solvation of the protected regions in MHC-I decreases the tertiary packing by breaking the contiguity of the surface hydrophobic patches at the interface with heavy chain and the nearby region at the surface charge cluster of the C-terminal segment. As a result, the molecule is placed in a state in which even minor charge and solvation changes in response to pH or ionic-strength variations can easily compromise the hydrophobic/hydrophilic balance and trigger the transition into a partially unfolded intermediate that starts with unpairing of strand I and leads to polymerization and precipitation into fibrils or amorphous aggregates. The same mechanism accounts for the partial unfolding and fiber formation subsequent to Cu(2+) binding, which is shown to occur primarily at His 31 and involve partially also His 13, the next available His residue along the partial unfolding pathway.