Human serum albumin chromatography by Cibacron Blue F3GA-derived microporous polyamide hollow-fiber affinity membranes

An affinity dye ligand, Cibacron Blue F3GA was covalently attached onto commercially available microporous polyamide hollow-fibre membranes for human serum albumin (HSA) adsorption from both aqueous solutions and human plasma. Different amounts of Cibacron Blue F3GA were incorporated on the polyamide hollow-fibres by changing the dye attachment conditions, i.e. initial dye concentration, addition of sodium carbonate and sodium chloride. The maximum amount of Cibacron Blue F3GA attachment was obtained at 42.5 μmol g⁻¹ when the hollow-fibres were treated with 3 M HCl for 30 min before performing the dye attachment. HSA adsorption onto unmodified and Cibacron Blue F3GA-derived polyamide hollow-fibre membranes was investigated batchwise. The non-specific adsorption of HSA was very low (6.0 mg g⁻¹ hollow-fibre). Cibacron Blue F3GA attachment onto the hollow-fibres significantly increased the HSA adsorption (147 mg g⁻¹ hollow-fibre). The maximum HSA adsorption was observed at pH 5.0. Higher HSA adsorption was observed from human plasma (230 mg HSA g⁻¹ hollow-fibre). Desorption of HSA from Cibacron Blue F3GA derived hollow-fibres was obtained using 0.1 M Tris–HCl buffer containing 0.5 M NaSCN or 1.0 M NaCl. High desorption ratios (up to 98% of the adsorbed HSA) were observed. It was possible to reuse Cibacron Blue F3GA derived polyamide hollow-fibre without significant decreases in the adsorption capacities.     

Hazards in the use of Cibacron Blue F3GA in studies of proteins.

Cibacron Blue F3GA from several commercial sources is shown to be heterogeneous. This crude dye inactivates both phosphoglycerate kinase and isoleucyl-tRNA synthetase. Purification of Cibacron Blue F3GA to homogeneity results in a dramatic decrease in inactivation of these enzymes. The inactivation is shown to be due to covalent modification of phosphoglycerate kinase and probably isoleucyl-tRNA synthetase by a minor component present in crude Cibacron Blue F3GA.     

Analytical evaluation of the purity of commercial preparations of Cibacron Blue F3GA and related dyes

The composition and purity of three commercial preparations of the widely used affinity chromatography ligand Cibacron Blue F3GA have been evaluated by TLC and by paired-ion reversed-phase HPLC and were found to contain several chromophoric species. Stepwise synthesis of the reported dye structure showed that only one commercial preparation contained any actual Cibacron Blue F3GA, and that it was present only in minor amounts. In all three preparations the major component appears to be the dichlorotriazinyl precursor of Cibacron Blue F3GA. Commercial samples of the related dyes Procion Blue MX-3G and Procion Blue MX-R are also highly heterogeneous. In addition, our experiments suggest that TLC results must be evaluated carefully to ensure that catalytic surface activity of alumina and silica has not created ghost bands.     

Cadmium removal from human plasma by Cibacron Blue F3GA and thionein incorporated into polymeric microspheres

Poly(2-hydroxyethylmethacrylate–ethyleneglycoldimethacrylate) [poly(HEMA–EGDMA)] microspheres carrying Cibacron Blue F3GA and/or thionein were prepared and used for the removal of cadmium ions Cd(II) from human plasma. The poly(HEMA–EGDMA) microspheres, in the size range of 150–200 μm in diameter, were produced by a modified suspension copolymerization of HEMA and EGDMA. The reactive triazinyl dye-ligand Cibacron Blue F3GA was then covalently incorporated into the microspheres. The maximum dye incorporation was 16.5 μmol/g. Then, thionein was bound onto the Cibacron Blue F3GA-incorporated microspheres under different conditions. The maximum amount of thionein bound was 14.3 mg/g. The maximum amounts of Cd(II) ions removed from human plasma by poly(HEMA–EGDMA)–Cibacron Blue F3GA and poly(HEMA–EGDMA)–Cibacron Blue F3GA–thionein were of 17.5 mg/g and 38.0 mg/g, respectively. Cd(II) ions could be repeatedly adsorbed and desorbed with both types of microspheres without significant loss in their adsorption capacity.     

Effect of Cibacron Blue F3GA on phosphoglycerate kinase of Lactobacillus plantarum and phosphoglycerate mutase of Leuconostoc dextranicum

Blue dextran or Cibacron Blue F3GA has been shown to inhibit yeast phosphoglycerate kinase [EC 2.7.2.3] competitively with respect to ATP (Thompson et al. (1975) Proc. Natl. Acad. Sci. U.S. 72, 663--667; Beissner and Rudolph (1979) J. Biol. Chem. 254, 6273--6277). However, we have found that phosphoglycerate kinase of Lactobacillus plantarum was inhibited by Cibacron Blue F3GA, the blue chromophore of blue dextran, noncompetitively with respect to ATP, but competitively with respect to 3-phosphoglycerate. Further inhibition studies with Cibacron Blue F3GA suggest that one molecule of the dye was bound per molecule of phosphoglycerate kinase at a saturated level of either substrate, but two molecules of the dye were bound per molecule of the kinase with an unsaturated level of either substrate used as a fixed substrate. Furthermore, phosphoglycerate mutase [EC 2.7.5.3] of Leuconostoc dextranicum was also inhibited by Cibacron Blue F3GA competitively with respect to 3-phosphoglycerate and noncompetitively with respect to 2,3-bisphosphoglycerate. These results suggest that the 3-phosphoglycerate-binding site on both phosphoglycerate kinase and phosphoglycerate mutase can interact with Cibacron Blue F3GA.     

Development of the magnetic beads for dye ligand affinity chromatography and application to magnetically stabilized fluidized bed system

Magnetic poly(2-hydroxyethylmethacrylate) [mPHEMA] beads were prepared by suspension polymerization of HEMA in the presence of Fe₃O₄ nano-powder. Cibacron Blue F3GA was covalently immobilized to the mPHEMA beads via nucleophilic substitution reaction between chloride of its triazine ring and hydroxyl groups of HEMA under alkaline conditions. The mPHEMA/Cibacron Blue F3GA beads (100–140 μm in diameter) carrying 68.3 μmol Cibacron Blue F3GA per gram polymer were used for β-casein adsorption studies. Adsorption studies were performed under different conditions in a batch system (i.e., pH, β-casein initial concentration, temperature, and ionic strength) and then in a magnetically stabilized fluidized bed (MSFB) system. The swelling ratio of the mPHEMA was 62.1%. The maximum adsorption capacity for batch system was 20.2% lower as compared to the value obtained in MSFB. The mPHEMA/Cibacron Blue F3GA beads could be repeatedly applied for β-casein adsorption without significant losses in the adsorption capacity.     

New sorbent for bilirubin removal from human plasma: Cibacron Blue F3GA-immobilized poly(EGDMA–HEMA) microbeads

Cibacron Blue F3GA-immobilized poly(EGDMA–HEMA) microbeads were investigated as a specific sorbent for bilirubin removal from human plasma. The poly(EGDMA–HEMA) microbeads were prepared by a modified suspension copolymerization technique. Cibacron Blue F3GA was covalently coupled to the poly(EGDMA–HEMA) microbeads via the nucleophilic reaction between the chloride of its triazine ring and the hydroxyl groups of the HEMA molecule, under alkaline conditions. Bilirubin adsorption was investigated from hyperbilirubinemic human plasma on the poly(EGDMA–HEMA) microbeads containing different amounts of immobilized Cibacron Blue F3GA, (between 5.0–16.5 μmol/g). The non-specific bilirubin adsorption on the unmodified poly(EGDMA–HEMA) microbeads were 0.32 mg/g from human plasma. Higher bilirubin adsorption values, up to 14.8 mg/g, were obtained with the Cibacron Blue F3GA-immobilized microbeads. Bilirubin molecules interacted with these sorbents directly. Contribution of albumin adsorption on the bilirubin adsorption was pronounced. Bilirubin adsorption increased with increasing temperature.     

Chitosan microspheres as immobilized dye affinity support for catalase adsorption

Chitosan microsphere (CS) was prepared by phase-inversion method as the support matrices. Cibacron Blue F3GA (CB) was covalently attached to the chitosan microspheres, and thus the novel dye-affinity adsorbent was obtained. These Cibacron Blue F3GA-attached chitosan microspheres (CB-CS) were used in the catalase (CAT) adsorption studies. The maximum CAT adsorption capacity of Cibacron Blue F3GA-attached chitosan microspheres was 28.4 mg/g at pH 7.0. Langmuir adsorption model was found to be applicable in interpreting CAT adsorption. Significant amount of the adsorbed CAT (up to 90.6%) was eluted in the elution medium containing 0.5 M NaSCN at pH 8.0. It appears that CB-CS can be applied for adsorption of CAT without causing any denaturation.     

Purification of alpha 2,6-sialyltransferase from rat liver by dye chromatography.

We describe a simple three-step purification for Gal-beta 1,4-GlcNAc-alpha 2,6-sialyltransferase (EC 2.4.99.1) from rat liver which uses chromatography on Cibacron Blue F3GA and f.p.l.c. It gives a highly purified (11,000-fold) enzyme in 19% yield, which is free of other sialyltransferases, CMP-NeuAc hydrolase, sialidases and proteinases.     

Dye-incorporated poly(EGDMA-HEMA) microspheres as specific sorbents for aluminum removal

Aluminum [Al(III)] adsorption onto dye-incorporated poly(ethylene glycol dimethacrylate-hydroxyethyl methacrylate) [poly(EGDMA-HEMA)] microspheres was investigated. Poly(EGDMA-HEMA) microspheres, in the size range of 150–200 μm, were produced by a modified suspension polymerization of EGDMA and HEMA. The reactive dyes (i.e., Congo Red, Cibacron Blue F3GA and Alkali Blue 6B) were covalently incorporated to the microspheres. The maximum dye load was 14.5 μmol Congo Red/g, 16.5 μmol Cibacron Blue F3GA/g and 23.7 μmol Alkali Blue 6B/g polymer. The maximum Al(III) adsorption on the dye microspheres from aqueous solutions containing different amounts of Al(III) ions were 27.9 mg/g, 17.3 mg/g and 12.2 mg/g polymer for the Congo Red, Cibacron Blue F3GA and Alkali Blue 6B, respectively. The maximum Al(III) adsorption was observed at pH 7.0 in all cases. Non-specific Al(III) adsorption was about 0.84 mg/g polymer under the same conditions. High desorption ratios (95%) were achieved in all cases by using 0.1 M HNO₃. It was possible to reuse these dye-incorporated poly(EGDMA-HEMA) microspheres without significant losses in the Al(III) adsorption capacities.     

kappa-Carrageenan as a carrier in affinity precipitation of yeast alcohol dehydrogenase

kappa-Carrageenan is a non-toxic polymer from seaweeds, which becomes reversibly insoluble upon the addition of K(+). Its conjugate with the dye, Cibacron Blue 3GA, was used to purify alcohol dehydrogenase from crude yeast extract by affinity precipitation. Response surface methodology was used to optimize conditions for affinity precipitation of the enzyme with the polymer-dye conjugate. Recovery of 58% of the enzyme activity with 13.6-fold purification was obtained.     

A rapid purification of T4 polynucleotide kinase using Blue Dextran-Sepharose chromatography.

A rapid batch procedure is described for purification of T4 polynucleotide kinase (ATP:5'-dephosphopolynucleotide 5'-phosphotransferase, EC 2.7.1.78) to near homogeneity using Blue Dextran-Sepharose chromatography. The enzyme preparation is sufficiently free of contaminating endonuclease and alkaline phosphatase activities to be suitable for radioactively labeling nucleic acids in vitro. Kinetic measurements indicate that the chromophore of Blue Dextran, Cibacron Blue F3GA, inhibits the activity of T4 polynucleotide kinase competitively with respect to single stranded DNA substrate and non-competitively with respect to the rATP substrate.     

Monosize poly(glycidyl methacrylate) beads for dye-affinity purification of lysozyme

Cibacron Blue F3GA was covalently attached onto monosize poly(glycidyl methacrylate) [poly(GMA)] beads for purification of lysozyme from chicken egg white. Monosize poly(GMA) beads, 1.6 microm in diameter, were produced by a dispersion polymerization technique. The content of epoxy groups on the surface of the poly(GMA) sample determined by the HCl-pyridine method (3.8 mmol/g). Cibacron Blue F3GA loading was 1.73 mmol/g. The monosize beads were characterized by elemental analysis, FTIR and SEM. Adsorption studies were performed under different conditions in a batch system (i.e., medium pH, protein concentration, temperature and ionic strength). Maximum lysozyme adsorption amount of poly(GMA) and poly(GMA)-Cibacron Blue F3GA beads were 1.6 and 591.7 mg/g, respectively. The applicability of two kinetic models including pseudo-first order and pseudo-second order model was estimated on the basis of comparative analysis of the corresponding rate parameters, equilibrium adsorption capacity and correlation coefficients. Results suggest that chemisorption processes could be the rate-limiting step in the adsorption process. It was observed that after 10 adsorption-elution cycle, poly(GMA)-Cibacron Blue F3GA beads can be used without significant loss in lysozyme adsorption capacity. Purification of lysozyme from egg-white was also investigated. Purification of lysozyme was monitored by determining the lysozyme activity using Micrococcus lysodeikticus as substrate. The purity of the eluted lysozyme was analyzed by SDS-PAGE and found to be 88% with recovery about 79%. The specific activity of the eluted lysozyme was high as 43,600 U/mg.     

Affinity extraction of dye- and metal ion-binding proteins in polyvinylpyrrolidone-based aqueous two-phase system

Affinity extraction of dye- and metal ion-binding proteins, respectively, in a polyvinylpyrrolidone (PVP40)-Reppal PES 100 two-phase system was investigated. Due to the ability of PVP to complex azo dyes and inorganic ions, covalent coupling of the ligands was not essential. Cibacron Blue F3GA was used as the ligand for extraction of lactate dehydrogenase (LDH) from porcine muscle, while copper ions were used for extraction of B. stearothermophilus LDH with a fusion tag of six histidine residues (His6-LDH) from recombinant Escherichia coli homogenate. The binding strength of the enzymes to their respective ligands was only slightly reduced in the presence of PVP. The partition coefficient of Cibacron Blue and Cu2+ ions in the two-phase systems composed of different concentrations of PVP and Reppal was in the range of 20-30, with maximal partitioning being observed in the 17% (w/w) PVP40-10% Reppal PES100 system. Only a minor leakage of the ligands to the bottom phase was observed with time. The partitioning of porcine LDH to the PVP phase was increased 100-fold, and a maximal recovery of 89% was obtained in the two-phase system loaded with 0.2% (w/w) Cibacron Blue. The enzyme was quantitatively recovered with further purification from the PVP-dye phase using a secondary extraction step with 170 mM phosphate or alternatively with 100 mM phosphate containing NADH or NaCl. A more than 10-fold increase in the partition coefficient of His6-LDH was achieved in the two-phase system loaded with 0.4% (w/w) copper sulfate compared to the system lacking the metal ions. The enzyme was also back-extracted into phosphate phase in the presence of imidazole.     

Cibacron Blue亲和层析及应用

以Ｆ３ＧＡ（Ｃｉｂａｃｒｏｎ　Ｂｌｕｅ　Ｆ３ＧＡ）为配基建立了一种可用于免疫毒素（ＩＴ）分离纯化的亲和层析方法。实验中用三种不同来源的核糖体灭活蛋白（ＲＩＰ）,即蓖麻毒素Ａ链（ＲＴＡ）,苦瓜毒素（ｍｏｍｏｒｄｉｎ,ＭＴ）和Ｓａｐｏｒｉｎ,以探讨ＲＩＰ与Ｆ３ＧＡ的相互作用。分析显示三种ＲＩＰ均能引起Ｆ３ＧＡ吸收光诸明显红移,提示ＲＩＰ均可与Ｆ３ＧＡ发生特异结合。将Ｆ３ＧＡ与Ｓｅｐｈａｄｅｘ交联可获得Ｂｌｕｅｄｅｘ。Ｂｌｕｅｄｅｘ亲和层析是一种经济有效,简单易行,便于在各类实验室中使用的蛋白质亲和层析技术。结果表明：在低盐溶液中ＲＴＡ和ＭＴ均可迅速地与Ｂｌｕｅｄｅｘ结合,而在高盐溶液中（０．６５ｍｏｌ／ＬＮａＣｌ）又极易被洗脱回收。这一技术用于免疫毒素的研究可有效地去除游离抗体,而不影响其杀伤活性。     

Comparative studies of the binding of some ligands to human serum albumin non-covalently attached to immobilized Cibacron Blue, or covalently immobilized on Sepharose, by column affinity chromatography.

A comparative study of the ligand-binding properties of human serum albumin was performed by the technique of affinity chromatography with the protein attached to immobilized Cibacron Blue F3GA (Blue Sepharose), or covalently immobilized on Sepharose. The binding strength of octanoate, decanoate and dodecanoate is much weaker when human serum albumin is attached to immobilized Cibacron Blue, indicating that the binding sites for fatty acids are involved in the attachment of human serum albumin to immobilized Cibacron Blue. The results revealed additional alterations of the ligand binding when human serum albumin was attached to immobilized Cibacron Blue, involving sites outside of the binding domains of fatty acids. Thus the stereoselective binding of L-tryptophan was abolished, and the resolution of the warfarin enantiomers was impaired. However, the binding strength of warfarin and salicylic acid was rather close to the values observed with human serum albumin covalently immobilized on Sepharose. It is suggested that the availability of the binding sites for L-tryptophan, warfarin and salicylic acid is partially blocked by the complex between albumin and the dye without direct participation in the complex-formation. An alternative interpretation involves an allosteric mechanism brought about by complex-formation between serum albumin and the immobilized Cibacron Blue.     

Pseudo-affinity chromatographic approach to probe heterogeneity in buffalo pituitary luteinizing hormone: probable pseudolectin-like behavior of immobilized Cibacron Blue 3GA

The alpha (α) and beta (β) subunits of buffalo pituitary luteinizing hormone (LH) were chromatographed on Cibacron Blue 3GA agarose and their immunoreactivity was quantitated using anti-α and anti-β anti sera. Subsequent analyses showed α subunits were relatively more hydrophilic than β subunits. Further, the naturally occurring free α and β subunits were more hydrophobic than their native counterparts which were dissociated and isolated from heterodimeric LH. The lesser sugar content in freely occurring α and beta subunits may be attributed for increased hydrophobicity and consequent upon the existence of their uncombined free forms. In order to ascertain putative sugar–dye interaction, crude LH carrying free subunits, pure LH, and non-glycosylated recombinant β subunit of LH were loaded separately on Cibacron Blue. Methyl mannoside was able to elute 33% of the bound protein in case of crude and pure LH, whereas there was little (3%) elution in case of recombinant LH β subunit. This study suggests a compositional heterogeneity in free and native subunits of LH from the buffalo pituitary. In addition, our findings reveal the pseudolectin-like behavior of Cibacron Blue.     

Bilirubin removal from human plasma by Cibacron Blue F3GA using immobilized microporous affinity membranous capillary method

A novel affinity sorbent system for direct bilirubin removal from human plasma was developed. These new adsorbents comprise Cibacron Blue F3GA as the specific ligand, and microporous membranous poly(tetrafluoroethylene) capillary (modified by coating with a hydrophilic layer of poly(vinyl alcohol) after activation) as the carrier matrix. The affinity adsorbents carrying 126.5 micromol Cibacron Blue F3GA/g polymer was then used to remove bilirubin in a flow-injection system. Non-specific adsorption on the poly(vinyl alcohol) coated capillary remains low, and higher affinity adsorption capacity, of up to 76.2 mg/g polymer was obtained after dye immobilization. The bilirubin adsorption capacity of the affinity capillary decreased with increase in the recirculation rate of plasma. The adsorption capacity increased with increase the temperature while decreased with increase the ionic strength. The maximum adsorption was only observed in neutral solution (pH 6-7). The adsorption isotherm fitted the Langmuir model well. These new adsorbents have higher velocity of mass transfer, better adsorption capacity, less fouling, longer service life and good reusability. The results of blood tests suggested the dye affinity capillary has good blood compatibility.     

The Interaction of Mammalian Interferons with Immobilized Cibacron Blue F3Ga: Modulation of Binding Strength

Mouse, hamster, rabbit, horse, and human interferons bind to immobilized Cibacron Blue F3GA under appropriate solvent conditions. Three forms of the immobilized ligand have been investigated: Cibacron Blue F3GA-Sepharose 4B, Blue Dextran-Sepharose 4B and Blue Sepharose CL-6B. The strength of binding of an interferon depends critically on the sorbent: Cibacron Blue F3GA-Sepharose 4B is the weakest in the series and Blue Sepharose CL-6B the strongest. The use of Blue Dextran-Sepharose 4B - a sorbent of intermediate binding properties - allows the complete separation of hamster, mouse and human fibroblast interferons in a single chromatographic step. Indeed, both the resolution, as well as the recovery, of those interferons is complete - regardless of the relative complexity of the chromatographed preparation (containing either crude or purified interferons). Thus, these ligands should prove of considerable use     

The use of various immobilized-triazine affinity dyes for the purification of 6-phosphogluconate dehydrogenase from Bacillus stearothermophilus.

1. 6-Phosphogluconate dehydrogenase from Bacillus stearothermophilus was purified approximately 260-fold on triazine-immobilized dye columns to a final specific activity of 54 mumol of NADP+ reduced/min per mg of protein and an overall yield of 62%. 2. An investigation of the capacities of different triazine dyes that inhibit 6-phosphogluconate dehydrogenase was carried out. Cibacron Blue F3G-A and Procion Red HE-3B strongly inhibited the enzyme in free solution and were therefore chosen as the ligands in the purification scheme. 3. KCl was found to be the most suitable agent for eluting 6-phosphogluconate dehydrogenase from Procion Red HE-3B-Sepharose 6B. NADP+ could specifically elute 6-phosphogluconate dehydrogenase from Cibacron Blue F3G-A-Sepharose 6B. 4. A study of the effect of temperature on the binding of pure 6-phosphogluconate dehydrogenase to both Cibacron Blue-Sepharose and Procion Red-Sepharose showed that the binding increased with an increase in temperature.