Stringent integrity requirements for both trans-activation and DNA-binding in a trans-activator, Oct3.

POU-specific and POU-homeo domains of Oct3 were produced in Echerichia coli for characterization of DNA binding to the octamer sequence. POU domain protein including A, B and H domains could bind to the octamer sequence efficiently and specifically, and DNase I footprint analysis gave an indistinguishable protection pattern between recombinant POU protein of Oct3 and native Oct3 from undifferentiated P19 cells. Truncated mutants, which contained B-specific and H domains or the H domain only, showed no binding activity, indicating that both of POU-specific and POU-homeo domains are essential for binding activity to octamer sequence. Furthermore, a 6 amino acid deletion from the N-terminal region of the A-specific domain is enough to destroy the binding activity. As for trans-activation, the N-terminal region is essential and sufficient. Deletion of the N-terminal proline-rich region rapidly eliminated trans-activating activity. These data strongly indicate the stringent integrity requirements for both trans-activation and DNA-binding domains in Oct3.     

Impact of Protein/Protein Interactions on Global Intermolecular Translocation Rates of the Transcription Factors Sox2 and Oct1 between DNA Cognate Sites Analyzed by z-Exchange NMR Spectroscopy

Oct1 and Sox2 synergistically regulate developmental genes by binding to adjacent sites within promoters. We have investigated the kinetics of global intermolecular translocation of Sox2 and Oct1 between cognate sites located on different DNA molecules by z-exchange NMR spectroscopy. In the Hoxb1 promoter, the Sox2 and Oct1 sites are immediately adjacent to one another, and the intermolecular translocation rates are too slow to be measured by z-exchange spectroscopy. By introducing a 3-bp insertion between the Sox2 and Oct1 sites to mimic the spacing in the FGF4 enhancer, the interprotein contact surface is reduced, and the translocation rates are increased. Interaction between Sox2 and the POU-specific domain (POU(S)) of Oct1 does not affect the translocation mechanism but modulates the rates. Translocation involves only jumping (dissociation and reassociation) for Sox2, but both jumping and direct intersegment transfer (no dissociation into free solution) for Oct1. The dissociation (k(off) ～1.5 s(-1)) and association (k(on) ～5.1 × 10(9) m(-1)s(-1)) rate constants for Sox2 are reduced 4-fold and increased 5-fold, respectively, in the presence of Oct1. k(off) (～3.5 s(-1)) for Oct1 is unaffected by Sox2, whereas k(on) (～1.3 × 10(9) m(-1)s(-1)) is increased ～13-fold. The direct intermolecular translocation rate (k(inter) ～1.8 × 10(4) m(-1)s(-1)) for the POU(S) domain of Oct1 is reduced 2-fold by Sox2, whereas that for the POU homeodomain (POU(HD)) of Oct1 (k(inter) ～ 1.7 × 10(4) m(-1)s(-1)) remains unaltered, consistent with the absence of contacts between Sox2 and POU(HD). The data suggest a model for the sequence of binding events involved in synergistic gene regulation by Sox2 and Oct1.     

Interplay between minor and major groove-binding transcription factors Sox2 and Oct1 in translocation on DNA studied by paramagnetic and diamagnetic NMR

The pathways whereby Sox2 scans DNA to locate its specific binding site are investigated by NMR in specific and nonspecific Sox2·DNA complexes and in a specific ternary complex with Oct1 on the Hoxb1 regulatory element. Direct transfer of Sox2 between nonspecific sites on different DNA molecules occurs without dissociation into free solution at a rate of ～10(6) M(-1) s(-1), whereas one-dimensional sliding proceeds with a diffusion constant of ≥0.1 μm(2)·s(-1). Translocation of Sox2 from one specific DNA site to another occurs via jumping, involving complete dissociation into free solution (k(d) ～5-6 s(-1)) followed by reassociation (k(a) ～5 × 10(8) M(-1) s(-1)). In the presence of Oct1 bound to an adjacent specific site, k(d) is reduced by more than 10-fold. Paramagnetic relaxation measurements, however, demonstrate that sparsely populated (<1%), transient states involving nonspecifically bound Sox2 in rapid exchange with specifically bound Sox2 are sampled in both binary Sox2·DNA- and ternary Oct1·Sox2·Hoxb1-DNA-specific complexes. Moreover, Sox2 modulates the mechanism of translocation of Oct1. Both Sox2 and the Oct1 POU(HD) domain are transiently released from the specific ternary complex by sliding to an adjacent nonspecific site, followed by direct transfer to another DNA molecule, whereas the Oct1 POU(S) domain is fixed to its specific site through direct interactions with Sox2. Intermolecular translocation of POU(HD) results in the formation of a bridged intermediate spanning two DNA molecules, enhancing the probability of complete intermolecular translocation of Oct1. By way of contrast, in the specific Oct1·DNA binary complex, POU(S) undergoes direct intermolecular translocation, whereas POU(HD) scans the DNA by sliding.     

Cloning and characterization of the rabbit POU5F1 gene.

The product of the POUSF1 gene, Oct4, plays an important role both in embryonic development and in the self-renewal and differentiation of totipotent cells. To understand the function of Oct4 in rabbit ES cells, we cloned and sequenced the rabbit POU5F1 gene, as well as the cDNA encoded by the gene. The Oct4 cDNA contains a 1083 bp ORF encoding a 360 aa protein and a 241 bp 3' UTR sequence. Oct4 mRNA was expressed at a high level in rabbit ES cells and was barely detectable in the adult spleen, kidney, brain and muscle tissues. The POU5F1 gene is approximately 6 kb in length and includes five exons and four introns. Gene organization is similar to that of the mouse, human and bovine orthologs. Sequencing of the gene revealed an 82% (mouse), 90% (human) and 89% (bovine) overall identity at the protein level. The rabbit POUSF1 gene was mapped to chromosome 12q1.1 by PCR amplification of DNA from two putative POU5F1-containing BAC clones, which were previously mapped to chromosome 12q1.1. The cloning of the rabbit POU5F1 gene will facilitate studies on its roles in rabbit embryogenesis and ES cells.     

Segments of the POU domain influence one another''s DNA-binding specificity.

The ubiquitously expressed mammalian POU-domain protein Oct-1 specifically recognizes two classes of cis-acting regulatory elements that bear little sequence similarity, the octamer motif ATGCAAAT and the TAATGARAT motif. The related pituitary-specific POU protein Pit-1 also recognizes these two motifs but, unlike Oct-1, binds preferentially to the TAATGARAT motif. Yet in our assay, Pit-1 still binds octamer elements better than does the octamer motif-binding protein Oct-3. The POU domain is responsible for recognizing these diverse regulatory sequences through multiple DNA contacts that include the two POU subdomains, the POU-specific region, and the POU homeodomain. The DNA-binding properties of 10 chimeric POU domains, in which different POU-domain segments are derived from either Oct-1 or Pit-1, reveal a high degree of structural plasticity; these hybrid proteins all bind DNA well and frequently bind particular sites better than does either of the parental POU domains. In these chimeric POU domains, the POU-specific A and B boxes and the hypervariable POU linker can influence DNA-binding specificity. The surprising result is that the influence a particular segment has on DNA-binding specificity can be greatly affected by the origin of other segments of the POU domain and the sequence of the binding site. Thus, the broad but selective DNA-binding specificity of Oct-1 is conferred both by multiple DNA contacts and by dynamic interactions within the DNA-bound POU domain.     

Comparative thermodynamics for monomer and dimer sequence-dependent binding of a heterocyclic dication in the DNA minor groove

Phenylamidine cationic groups linked by a furan ring (furamidine) and related symmetric diamidine compounds bind as monomers in the minor groove of AT sequences of DNA. DB293, an unsymmetric derivative with one of the phenyl rings of furamidine replaced with a benzimidazole, can bind to AT sequences as a monomer but binds more strongly to GC-containing minor-groove DNA sites as a stacked dimer. The dimer-binding mode has high affinity, is highly cooperative and sequence selective. In order to develop a better understanding of the correlation between structural and thermodynamic aspects of DNA molecular recognition, DB293 was used as a model to compare the binding of minor-groove agents with AT and mixed sequence DNA sites. Isothermal titration calorimetry and surface plasmon resonance results clearly show that the binding of DB293 and other related compounds into the minor groove of AT sequences is largely entropy-driven while the binding of DB293 as a dimer into the minor groove of GC-containing sequences is largely enthalpy-driven. At 25 degrees C, for example, the AT binding has DeltaG degrees, DeltaH degrees and TDeltaS degrees values of -9.6, -3.6 and 6.0 kcal/mol while the values for dimer binding to a GC-containing site are -9.0, -10.9 and -1.9 kcal/mol (per mol of bound compound), respectively. These results show that the thermodynamic components for binding of compounds of this type to DNA are very dependent on the structure, solvation and sequence of the DNA binding site.     

Molecular model for DNA recognition by the family of basic-helix-loop-helix-zipper proteins.

The basic-helix-loop-helix-zipper (bHLH-Zip) motif is a conserved region of approximately 70 amino acids that mediates both sequence-specific DNA binding and protein dimerization. This motif is found in protein sequences from many eukaryotic organisms and is contained in the protein sequence of the oncogene myc and its partner max, and a shortened version of the motif (bHLH) is found in the muscle determination factor myoD and its partner E12. An evaluation of the conserved amino acids that define the motif coupled with the published mutagenic studies of this region has led to our formulation of a molecular model for the binding of this motif as a dimer to specific sequences of DNA. This model has the dimeric protein interacting with an abutted, dyad-symmetric DNA sequence. Helix 2 of each monomer is modeled as a coiled-coil extension of the C-terminal "leucine zipper." Helix 1 does not interact with helix 1 from its partner in the dimer but with the hydrophobic surface created when the helix 2 regions of the dimer interact with each other as a coiled-coil. Sequence-specific interactions are proposed between the basic region and the invariant cis elements that all bHLH-Zip proteins bind.     

Structural changes of Escherichia coli ferric uptake regulator during metal-dependent dimerization and activation explored by NMR and X-ray crystallography

Ferric uptake regulator (Fur) is a global bacterial regulator that uses iron as a cofactor to bind to specific DNA sequences. Escherichia coli Fur is usually isolated as a homodimer with two metal sites per subunit. Metal binding to the iron site induces protein activation; however the exact role of the structural zinc site is still unknown. Structural studies of three different forms of the Escherichia coli Fur protein (nonactivated dimer, monomer, and truncated Fur-(1-82)) were performed. Dimerization of the oxidized monomer was followed by NMR in the presence of a reductant (dithiothreitol) and Zn(II). Reduction of the disulfide bridges causes only local structure variations, whereas zinc addition to reduced Fur induces protein dimerization. This demonstrates for the first time the essential role of zinc in the stabilization of the quaternary structure. The secondary structures of the mono- and dimeric forms are almost conserved in the N-terminal DNA-binding domain, except for the first helix, which is not present in the nonactivated dimer. In contrast, the C-terminal dimerization domain is well structured in the dimer but appears flexible in the monomer. This is also confirmed by heteronuclear Overhauser effect data. The crystal structure at 1.8A resolution of a truncated protein (Fur-(1-82)) is described and found to be identical to the N-terminal domain in the monomeric and in the metal-activated state. Altogether, these data allow us to propose an activation mechanism for E. coli Fur involving the folding/unfolding of the N-terminal helix.     

Reversible redox- and zinc-dependent dimerization of the Escherichia coli fur protein

Fur is a bacterial regulator using iron as a cofactor to bind to specific DNA sequences. This protein exists in solution as several oligomeric states, of which the dimer is generally assumed to be the biologically relevant one. We describe the equilibria that exist between dimeric Escherichia coli Fur and higher oligomers. The dissociation constant for the dimer-tetramer equilibrium is estimated to be in the millimolar range. Oligomerization is enhanced at low ionic strength and pH. The as-isolated monomeric form of Fur is not in equilibrium with the dimer and contains two disulfide bridges (C92-C95 and C132-C137). Binding of the monomer to DNA is metal-dependent and sequence specific with an apparent affinity 5.5 times lower than that of the dimer. Size exclusion chromatography, EDC cross-linking, and CD spectroscopy show that reconstitution of the dimer from the monomer requires reduction of the disulfide bridges and coordination of Zn2+. Reduction of the disulfide bridges or Zn2+ alone does not promote dimerization. EDC and DMA cross-links reveal that the N-terminal NH2 group of one subunit is in an ionic interaction with acidic residues of the C-terminal tail and close to Lys76 and Lys97 of the other. Furthermore, the yields of cross-link drastically decrease upon binding of metal in the activation site, suggesting that the N-terminus is involved in the conformational change. Conversely, oxidizing reagents, H2O2 or diamide, disrupt the dimeric structure leading to monomer formation. These results establish that coordination of the zinc ion and the redox state of the cysteines are essential for holding E. coli Fur in a dimeric state.