磁性纳米颗粒固定化乙醇脱氢酶的研究

本研究采用3-丙氨基三乙氧基硅烷(APTES)和戊二醛修饰包裹有SiO2磁性Fe3O4纳米颗粒表面,将其作为固定化载体固定化乙醇脱氢酶,研究固定化条件对固定化效率的影响,并对固定化酶性质进行分析。研究发现,当Fe3O4@SiO2纳米颗粒修饰上氨基和醛基后依然具有良好的水分散性和胶体稳定性,适合作为固定化载体。通过单因素优化,发现当最适给酶量为11. 3U/100 mg,搅拌转速为150 r/min,固定化p H和固定化温度分别控制在6. 5和5℃～15℃,固定化时长为45 min时,具有较好的固定化效果,固定化率可达到60. 2%。在此条件下制备得到的固定化酶与游离酶相比,固定化酶具有良好的耐高温和耐碱性。所得固定化乙醇脱氢酶在连续使用8次后,固定化率仍保留在57%左右,表明该固定化酶具有较好的操作稳定性,可为连续生产NADH提供技术依据。     

涡旋磁纳米颗粒——崭新的生物医用磁性纳米平台

相比于超顺磁性纳米颗粒,具有涡旋磁畴的磁性纳米颗粒,由于独特的磁化闭合分布、较大的粒径尺寸及外加磁场中的磁化翻转特性,使得其兼具弱的颗粒间磁相互作用和更优异的磁学性能,在生物医学领域展现出了更好的应用优势和潜力.本综述结合近年来国内外对涡旋磁畴的研究及涡旋磁纳米颗粒在生物医学领域的报道,提出了一类新型的生物医用涡旋磁溶胶体系,并以涡旋磁氧化铁纳米盘和纳米环为例,介绍了涡旋磁纳米颗粒的化学合成,并着重论述了这类具有独特涡旋畴结构的纳米颗粒在磁共振成像、抗肿瘤治疗等生物医学应用上的最新研究进展.     

磁性纳米粒子在肿瘤热疗中的应用

本文介绍了肿瘤热疗及其存在的问题,并对磁热疗,磁性纳米粒子材料在热疗中的应用进行了综述。     

磁性纳米颗粒作为基因转染载体的研究

通过扫描电子显微镜和Zeta电位仪对磁性纳米颗粒的形貌、粒径、表面电位等进行了表征。利用凝胶电泳阻滞试验分析磁性纳米颗粒与DNA的结合情况,研究磁性纳米颗粒对DNA的保护效果,运用MTT和流式细胞术分析磁性纳米颗粒对细胞的毒性。以绿色荧光蛋白基因为报告基因进行293T细胞的转染,研究磁性纳米颗粒与质粒DNA不同比例条件下对293T细胞的转染效率,并与脂质体(Lipofectamine2000)介导的转染进行比较分析。结果表明,磁性纳米颗粒与DNA可以稳定结合,可以保护DNA免受酶的消化作用,当磁性纳米颗粒与DNA比为1 1时,转染效率最高,优于脂质体(Lipotamine2000)介导的转染,且对细胞的毒害作用小于Lipotamine2000。     

磁性纳米颗粒介导基因转染的研究进展

介绍了磁性纳米颗粒介导基因转染的最新研究进展,面临的主要问题以及将来的发展方向。     

磁性氧化铁纳米颗粒及其磁共振成像应用

磁性氧化铁纳米颗粒在磁共振成像方面的应用,已经在全世界范围内得到了广泛的关注,相关研究也被各国科学家高度重视.目前,磁性氧化铁纳米颗粒正在从早期的基于被动识别的肝部磁共振造影,快速转向基于主动识别的磁共振分子影像应用.本文将围绕磁性氧化铁纳米颗粒的生物体内应用,着重介绍磁性纳米颗粒的制备及其在疾病诊断,尤其是在肿瘤早期...     

磁性纳米颗粒作为载体在基因转染中的研究进展

磁性纳米颗粒具有很强的结合、浓缩与保护DNA的作用,具有超顺磁性、较高的安全性和低的免疫原性,可以结合大片段DNA,在外加磁场的作用下可实现安全、高效的基因靶向性运输,提高外源基因的转染效率。由于磁性纳米颗粒的独特性质,使得其作为非病毒载体在基因治疗中的应用进展迅速。我们简要介绍磁性纳米材料的特点、种类及结构,磁性纳米基因载体的特点,以及磁性纳米颗粒作为载体在基因转染中的应用情况。     

磁纳米识别探针的构造及其在真菌毒素检测中的应用进展

真菌毒素是一种由真菌产生的具有毒性的次级代谢产物,易引发严重的食品安全问题,不断探索更为高效准确的新型检测方法具有重要意义。磁纳米识别探针具有高效易分离、结合容量大、识别效果好、功能性强等优势,为复杂基质中痕量真菌毒素检测研究带来新方向。本文对磁纳米识别探针构造,由内向外对构成探针的磁纳米核心颗粒及其表面修饰物的种类及特点进行总结分析,在此基础上进而从探针的选择与功能、检测条件、检测灵敏度及特异性等方面,对近年来磁纳米识别探针在食品体系真菌毒素检测中的应用研究进行概述归纳,并对其未来的应用前景与发展方向进行展望。     

纳米颗粒作为基因载体的应用

随着纳米技术的发展,纳米颗粒因具有较高的转染效率、良好的靶向性及有效的基因保护作用而被用作基因载体。简要介绍了磁性纳米颗粒、硅纳米颗粒及阳离子多聚物颗粒等的研究进展。     

磁泳分离细菌新方法的研究

从酸性矿坑水中富集培养分离到的嗜酸氧化亚铁硫杆菌（Acidithiobacillus ferrooxidans,A.ferrooxidans）[1-2] 菌同趋磁细菌具有一定的相似性。通过显微镜观察发现,部分浸矿细菌在外加磁场的作用下具有微弱的趋磁性,基于菌种的这种特性,设计了磁泳分离仪,对其在磁场作用下泳动（磁泳）进行分析,经磁泳后的近磁、远磁菌的生理特性有较大的差异。从用涂布平板法获得的近磁菌纯培养A. ferrooxidans菌体中,分离得到纳米磁性颗粒,能谱分析表明,其主要成分为Fe和O元素。实验结果证明,A. ferrooxidans具有微弱趋磁性,采用磁泳分离该类菌体内含有磁性颗粒的细菌是可行的,这一分离技术的进一步完善和改进将为传统的微生物菌种分离提供一种新型分离技术,也将大大促进趋磁细菌的研究,而且它与浸矿工艺的结合将大大促进我国生物冶金的研究步伐。     

Magnetic nanoparticles for multi-imaging and drug delivery

Various bio-medical applications of magnetic nanoparticles have been explored during the past few decades. As tools that hold great potential for advancing biological sciences, magnetic nanoparticles have been used as platform materials for enhanced magnetic resonance imaging (MRI) agents, biological separation and magnetic drug delivery systems, and magnetic hyperthermia treatment. Furthermore, approaches that integrate various imaging and bioactive moieties have been used in the design of multi-modality systems, which possess synergistically enhanced properties such as better imaging resolution and sensitivity, molecular recognition capabilities, stimulus responsive drug delivery with on-demand control, and spatio-temporally controlled cell signal activation. Below, recent studies that focus on the design and synthesis of multi-mode magnetic nanoparticles will be briefly reviewed and their potential applications in the imaging and therapy areas will be also discussed.     

Recent Advances in Computational Methods for Nuclear Magnetic Resonance Data Processing

Although three-dimensional protein structure determination using nuclear magnetic resonance (NMR) spectroscopy is a computationally costly and tedious process that would benefit from advanced computational techniques, it has not garnered much research attention from specialists in bioinformatics and computational biology. In this paper, we review recent advances in computational methods for NMR protein structure determination. We summarize the advantages of and bottlenecks in the existing methods and outline some open problems in the field. We also discuss current trends in NMR technology development and suggest directions for research on future computational methods for NMR.     

功能化磁性纳米粒子在固定化酶研究中的应用

酶是高效的生物催化剂,在生物技术领域有广泛的应用。然而,不可再生催化的高成本和酶的有效成分分离回收,是实现大规模工业化应用需要解决的关键问题。磁性纳米粒子(magnetic nanoparticles,MNPs)具有优异的磁回收性质。通过设计和制备功能化MNPs作为固定化酶的多功能载体,是解决这一问题的有效途径之一,可为酶的工业化大规模应用提供条件。近年来,功能化磁性纳米粒子在酶的固定化领域基于载体性质、固定化方法和应用有广泛研究。文中重点介绍了近年来各种功能化磁性纳米载体,特别是Fe3O4纳米粒子,在固定化酶中的应用。根据功能化试剂的差异分类,实例讨论了不同功能化修饰的磁性纳米载体对酶的固定化,包括硅烷修饰的磁性纳米载体、有机聚合物修饰的磁性纳米载体、介孔材料修饰的磁性纳米载体以及金属-有机骨架材料(metal-organic framework,MOF)修饰的磁性纳米载体。同时,结合可持续工业催化的发展要求,对磁性复合载体固定化酶的发展前景进行了展望。     

Recent progress in electrodes for microbial fuel cells

The performance and cost of electrodes are the most important aspects in the design of microbial fuel cell (MFC) reactors. A wide range of electrode materials and configurations have been tested and developed in recent years to improve MFC performance and lower material cost. As well, anodic electrode surface modifications have been widely used to improve bacterial adhesion and electron transfer from bacteria to the electrode surface. In this paper, a review of recent advances in electrode material and a configuration of both the anode and cathode in MFCs are provided. The advantages and drawbacks of these electrodes, in terms of their conductivity, surface properties, biocompatibility, and cost are analyzed, and the modification methods for the anodic electrode are summarized. Finally, to achieve improvements and the commercial use of MFCs, the challenges and prospects of future electrode development are briefly discussed.     

Recent Progress in Biomass‐Derived Electrode Materials for High Volumetric Performance Supercapacitors

Tremendous efforts have been spent on the development of electrical energy storage (EES) systems with high volumetric performance in the past few years due to the evergrowing demand of miniaturized, portable electronic devices, and electric vehicles. Among all the EES devices, supercapacitors with electrode materials derived from biosources have attracted special attention due to their eco‐friendliness, natural abundance, their intrinsic porous structures as well as their renewable and sustainable features. However, the relatively low packing densities make their specific volumetric capacitance intrinsically low, which has largely limited their further application in the supercapacitors. To address these issues, various promising approaches ranging from structural manufacture to compositional design are applied and significant breakthroughs are witnessed in recent years. In this progress report, key factors influencing the volumetric performance of biomass‐derived electrode materials are systematically discussed with a particular focus spanning from fundamental to operational aspects. This work provides insights into the development of high‐volumetric‐performance biomass‐derived supercapacitors by comprehensively summarizing recent advances in the rational structural design and fabrication. Perspectives regarding the future challenges and promising research directions on the design of next‐generation EES devices are also provided.     

Immobilization of silver in polypropylene membrane for anti-biofouling performance

In this study, a method was developed to immobilize silver onto polypropylene (PP) membrane surfaces for improved anti-biofouling performance. A commercial PP membrane was first grafted with the thiol functional groups, and then silver ions were immobilized onto the PP membrane surface through coordinating with the thiol groups. The immobilized silver was found to be very stable, with only ～1.1% of the immobilized silver being leached out during a leaching test. The surface of the modified membrane (PPS-Ag) was examined with ATR-FTIR and XPS analysis, which verified the successful grafting of the thiol groups and the coordination of silver ions on the membrane surface. The surface properties of the membrane were also characterized by SEM, AFM and water contact angle measurements. The PPS-Ag membrane was found to have a smoother and more hydrophilic surface than the PP membrane. Both Gram-negative bacteria, Escherichia coli, and Gram-positive bacteria, Staphylococcus aureus, were used to evaluate the antibacterial and anti-biofouling performance of the PPS-Ag membrane. From disk diffusion experiments, the PPS-Ag membrane exhibited the capability of inhibiting the growth of both the Gram-negative and Gram-positive bacteria tested. The anti-biofouling performance of the membrane was assessed by immersion in a mixed suspension of E. coli and S. aureus and filtration tests. The PPS-Ag membrane showed a stable and significantly enhanced anti-biofouling performance as compared with the PP membrane. The results in this study demonstrate that biofouling of a PP membrane can be sufficiently overcome through immobilizing silver onto the membrane surface.     

Review on Challenges and Recent Advances in the Electrochemical Performance of High Capacity Li‐ and Mn‐Rich Cathode Materials for Li‐Ion Batteries

Li and Mn‐rich layered oxides, xLi₂MnO₃·(1–x)LiMO₂ (M=Ni, Mn, Co), are promising cathode materials for Li‐ion batteries because of their high specific capacity that can exceed 250 mA h g^?1. However, these materials suffer from high 1^st cycle irreversible capacity, gradual capacity fading, low rate capability, a substantial charge‐discharge voltage hysteresis, and a large average discharge voltage decay during cycling. The latter detrimental phenomenon is ascribed to irreversible structural transformations upon cycling of these cathodes related to potentials ≥4.5 V required for their charging. Transition metal inactivation along with impedance increase and partial layered‐to‐spinel transformation during cycling are possible reasons for the detrimental voltage fade. Doping of Li, Mn‐rich materials by Na, Mg, Al, Fe, Co, Ru, etc. is useful for stabilizing capacity and mitigating the discharge‐voltage decay of xLi₂MnO₃·(1–x)LiMO₂ electrodes. Surface modifications by thin coatings of Al₂O₃, V₂O₅, AlF₃, AlPO₄, etc. or by gas treatment (for instance, by NH₃) can also enhance voltage and capacity stability during cycling. This paper describes the recent literature results and ongoing efforts from our groups to improve the performance of Li, Mn‐rich materials. Focus is also on preparation of cobalt‐free cathodes, which are integrated layered‐spinel materials with high reversible capacity and stable performance.     

Improving of Catalase Stability Properties by Encapsulation in Alginate/Fe3O4 Magnetic Composite Beads for Enzymatic Removal of H2O2

The aim of this study was enhancing of stability properties of catalase enzyme by encapsulation in alginate/nanomagnetic beads. Amounts of carrier (10–100 mg) and enzyme concentrations (0.25–1.5 mg/mL) were analyzed to optimize immobilization conditions. Also, the optimum temperature (25–50°C), optimum pH (3.0–8.0), kinetic parameters, thermal stability (20–70°C), pH stability (4.0–9.0) operational stability (0–390 min), and reusability were investigated for characterization of the immobilized catalase system. The optimum pH levels of both free and immobilized catalase were 7.0. At the thermal stability studies, the magnetic catalase beads protected 90% activity, while free catalase maintained only 10% activity at 70°C. The thermal profile of magnetic catalase beads was spread over a large area. Similarly, this system indicated the improving of the pH stability. The reusability, which is especially important for industrial applications, was also determined. Thus, the activity analysis was done 50 times in succession. Catalase encapsulated magnetic alginate beads protected 83% activity after 50 cycles.