Improved hybridization assays employing tailed oligonucleotide probes: a direct comparison with 5'-end-labeled oligonucleotide probes and nick-translated plasmid probes

Terminal deoxynucleotidyl transferase was used to add labeled dAMP residues to the 3' end of oligonucleotide probes that hybridize to the 5' end of the neomycin phosphotransferase II gene. Southern hybridization conditions were described in which the sensitivity per unit of exposure time was about 30-fold greater for the tailed probe as compared to the 5'-end-labeled probe. The tailed oligonucleotide probe had the sensitivity per unit of exposure time comparable to that of a nick-translated probe of high specific activity: in 3 h of autoradiographic exposure both easily detected an amount of target equivalent to a single-copy gene in 10 micrograms of human DNA. The thermal dissociation profiles of 5'-end-labeled and tailed oligonucleotide probes were virtually identical and the tailed oligonucleotide probe was as allele specific as the 5'-end-labeled oligonucleotide probe. The useful lifetime of a 32P-tailed probe was about 1-2 weeks. Finally, by adding 50 35S-labeled nucleotides to the 3' end, we prepared a stable oligonucleotide probe with a sensitivity per unit of exposure time comparable to that of the unstable 5'-32P-labeled oligonucleotide probe.     

Probing distance and electrical potential within a protein pore with tethered DNA

DNA molecules tethered inside a protein pore can be used as a tool to probe distance and electrical potential. The approach and its limitations were tested with alpha-hemolysin, a pore of known structure. A single oligonucleotide was attached to an engineered cysteine to allow the binding of complementary DNA strands inside the wide internal cavity of the extramembranous domain of the pore. The reversible binding of individual oligonucleotides produced transient current blockades in single channel current recordings. To probe the internal structure of the pore, oligonucleotides with 5' overhangs of deoxyadenosines and deoxythymidines up to nine bases in length were used. The characteristics of the blockades produced by the oligonucleotides indicated that single-stranded overhangs of increasing length first approach and then thread into the transmembrane beta-barrel. The distance from the point at which the DNA was attached and the internal entrance to the barrel is 43 A, consistent with the lengths of the DNA probes and the signals produced by them. In addition, the tethered DNAs were used to probe the electrical potential within the protein pore. Binding events of oligonucleotides with an overhang of five bases or more, which threaded into the beta-barrel, exhibited shorter residence times at higher applied potentials. This finding is consistent with the idea that the main potential drop is across the alpha-hemolysin transmembrane beta-barrel, rather than the entire length of the lumen of the pore. It therefore explains why the kinetics and thermodynamics of formation of short duplexes within the extramembranous cavity of the pore are similar to those measured in solution, and bolsters the idea that a "DNA nanopore" provides a useful means for examining duplex formation at the single molecule level.     

A novel endonuclease IV post-PCR genotyping system

Here we describe a novel endonuclease IV (Endo IV) based assay utilizing a substrate that mimics the abasic lesions that normally occur in double-stranded DNA. The three component substrate is characterized by single-stranded DNA target, an oligonucleotide probe, separated from a helper oligonucleotide by a one base gap. The oligonucleotide probe contains a non-fluorescent quencher at the 5′ end and fluorophore attached to the 3′ end through a special rigid linker. Fluorescence of the oligonucleotide probe is efficiently quenched by the interaction of terminal dye and quencher when not hybridized. Upon hybridization of the oligonucleotide probe and helper probe to their complementary target, the phosphodiester linkage between the rigid linker and the 3′ end of the probe is efficiently cleaved, generating a fluorescent signal. In this study, the use of the Endo IV assay as a post-PCR amplification detection system is demonstrated. High sensitivity and specificity are illustrated using single nucleotide polymorphism detection.     

Signal amplification of padlock probes by rolling circle replication.

Circularizing oligonucleotide probes (padlock probes) have the potential to detect sets of gene sequences with high specificity and excellent selectivity for sequence variants, but sensitivity of detection has been limiting. By using a rolling circle replication (RCR) mechanism, circularized but not unreacted probes can yield a powerful signal amplification. We demonstrate here that in order for the reaction to proceed efficiently, the probes must be released from the topological link that forms with target molecules upon hybridization and ligation. If the target strand has a nearby free 3' end, then the probe-target hybrids can be displaced by the polymerase used for replication. The displaced probe can then slip off the targetstrand and a rolling circle amplification is initiated. Alternatively, the target sequence itself can prime an RCR after its non-base paired 3' end has been removed by exonucleolytic activity. We found the Phi29 DNA polymerase to be superior to the Klenow fragment in displacing the target DNA strand, and it maintained the polymerization reaction for at least 12 h, yielding an extension product that represents several thousand-fold the length of the padlock probe.     

Application of synthetic oligonucleotides to the diagnosis of human genetic diseases

Under appropriate conditions synthetic oligonucleotide hybridization probes display essentially absolute hybridization specificity. That is, every nucleotide must form a Watson-Crick base pair in order that the probe forms a stable duplex. All of the non-Watson-Crick base pairs, including G-T, have a destabilizing effect. Thus, it is possible to choose stringent conditions of hybridization such that, while a perfectly matched duplex between an oligonucleotide and complementary DNA will form, duplexes mismatched at one or more position will not. Mutations in a single base in the DNA sequence of a gene can and do result in genetic diseases. The hybridization of oligonucleotides to the region of DNA containing these base changes would be affected by the mutations and thus, oligonucleotide hybridization provides a means of detecting single base changes. In an attempt to develop a non-radioactive method for the detection of human genetic diseases, we have prepared biotinylated-oligonucleotides by an enzymatic method. An oligonucleotide probe (23-mer) containing a single biotinylated deoxyuridine residue at the 3'-terminus was prepared by a primer extention reaction using E. coli DNA polymerase I (Klenow fragment). The probe could be specifically and tightly bound with Avidin D in 1 M NaCl. It could be hybridized to a plasmid DNA containing a perfectly matched complementary sequence, but not to a DNA containing 5 non-consecutive non-complementary bases. The hybridized biotinylated probe could be visualized by Avidin D and biotinylated alkaline phosphatase, even when 1.8 ng of the plasmid DNA (0.5 fmol) was used. A general approach to the enzymatic synthesis of oligonucleotides containing a single biotinylated deoxyuridine at the 3' end is described.     

Measuring single-molecule DNA hybridization by active control of DNA in a nanopore

We present a novel application of active voltage control of DNA captured in a nanopore to regulate the amount of time the DNA is available to molecules in the bulk phase that bind to the DNA. In this work, the control method is used to measure hybridization between a single molecule of DNA captured in a nanopore and complementary oligonucleotides in the bulk phase. We examine the effect of oligonucleotide length on hybridization, and the effect of DNA length heterogeneity on the measurements. Using a mathematical model, we are able to deduce the binding rate of complementary oligonucleotides, even when DNA samples in experiments are affected by heterogeneity in length. We analyze the lifetime distribution of DNA duplexes that are formed in the bulk phase and then pulled against the pore by reversing the voltage. The lifetime distribution reveals several dissociation modes. It remains to be resolved whether these dissociation modes are due to DNA heterogeneity or correspond to different states of duplex DNA. The control method is unique in its ability to detect single-molecule complex assembly in the bulk phase, free from external force and with a broad (millisecond-to-second) temporal range.     

Intramolecular recombination R-triplex in solution: stabilization by bis-intercalator YOYO

Recognition of double-stranded DNA with a mixed nucleotide sequence by oligonucleotide is a long-term challenge. This aim can be achieved via formation of the recombination R-triplex, accommodating two identical DNA strands in parallel orientation, and antiparallel complementary strand. In the absence of proteins the R-triplex stability is low, however, so that intermolecular R-triplex is not formed by three DNA strands in a ligand-free system. Recently, recognition of DNA with mixed base sequence by single-stranded oligonucleotide in the presence of bis-intercalator YOYO was reported. Here, we describe thermodynamic characteristics of YOYO complexes with the model oligonucleotides 5'-GT-2AP-GACTGAG TTTT CTCAGTCTACGC GAA GCGTAGACTGAG-3' (R(2AP)CW) bearing a single reporting 2-aminopurine (2AP) in place of adenine and 5'-CTCAGTCTACGC GAA GCGTAGACTGAG-3' (CW). We found that each oligonucleotide is able to bind two YOYO molecules via intercalation mode in 0.5 M LiCl. Fluorescence intensity of YOYO intercalated in triplex R(2AP)CW and in CW hairpin increased 40-fold compared to the free YOYO. Remarkably, the melting temperature of the triplex (determined using temperature dependence of the 2AP fluorescence) increased from 19 degrees C to 33 degrees C upon binding two YOYO molecules. Further increase in the YOYO concentration resulted in binding of up to five YOYO molecules to R(2AP)CW triplex and up to six YOYO molecules to CW hairpin.     

Porphyrin conjugated to DNA by a 2'-amido-2'-deoxyuridine linkage

A porphyrin that contains a single carboxylic acid group was synthesized and coupled to 2'-amino-2'-deoxyuridine. The resultant product contained a free 3' hydroxyl group and a 4,4'-dimethoxytrityl (DMT) protecting group on the 5' hydroxyl of the uridine, making it suitable for use in oligonucleotide synthesis. The 3' H-phosphonate derivative of this molecule was synthesized and used to form a conjugate with a 19 nucleotide sequence of DNA (5'-CCTCCAGTGGAAATCAAGG-3'). This was carried out with the DNA attached at the 3' end to a control pore glass (CPG) substrate, allowing for rapid purification. After removal of the DMT group, an additional three nucleotides were added, leaving the porphyrin as an internal modification. This is the first report of porphyrin attached internally to an oligonucleotide using a hydrogen-bonding nucleoside analog. This allows oligonucleotides to be used as a scaffold for precise positioning of multiple porphyrins within biomimetic arrays.     

Direct probing: covalent attachment of probe DNA to double-stranded target DNA.

We report a novel procedure, which can be applied to probing of specific DNA, for covalently attaching probe DNA to complementary sequences in double-stranded target DNA. Employing hairpin-like oligonucleotide probes in combination with successive use of recA protein and DNA ligase, probes can be attached directly to target DNA molecules without dissociation of the DNA. The hairpin-like structure of the probes was designed so that the terminus of the probe oligonucleotide can be brought into close stereochemical proximity to the terminus of the complementary strand of target DNA for ligation. Because of the elimination of the DNA dissociation and subsequent hybridization (and washing) steps in the currently employed method, the probing process has become greatly simplified and more efficient and may lead to development of fully automated probing systems.     

Analysis of single nucleotide incorporation reactions by capillary electrophoresis

Single nucleotide incorporation assays have been used to probe the kinetic parameters of many DNA and RNA polymerases. Traditionally, oligonucleotide primers are 5'-(32)P labeled using T4 kinase and annealed to a complementary template with a 5' overhang. To quantify the reaction kinetics, the products of the primer extension reactions are usually separated using denaturing polyacrylamide gel electrophoresis and quantified using a phosphorimager or other method to measure radioactivity. We have developed a method using a 5' fluorescently labeled oligonucleotide to examine the kinetics of single nucleotide incorporation catalyzed by recombinant human mitochondrial polymerase gamma (Pol gamma) holoenzyme. Using laser-induced fluorescence detection in the P/ACE MDQ instrument, primers 5' labeled with fluorescent probes such as 6-carboxyfluorescein can be rapidly separated and quantified. However, we also show that only select probes can be used, presumably due to unfavorable interactions between Pol gamma and certain 5' labels.     

Correlation between microarray DNA hybridization efficiency and the position of short capture probe on the target nucleic acid

The hybridization behavior of small oligonucleotides arrayed on glass slides is currently unpredictable. In order to examine the hybridization efficiency of capture probes along target nucleic acid, 20-mer oligonucleotide probes were designed to hybridize at different distances from the 5' end of two overlapping 402- and 432-bp ermB products amplified from the target DNA. These probes were immobilized via their 5' end onto glass slides and hybridized with the two labeled products. Evaluation of the hybridization signal for each probe revealed an inverse correlation with the length of the 5' overhanging end of the captured strand and the hybridization signal intensity. Further experiments demonstrated that this phenomenon is dependent on the reassociation kinetics of the free overhanging tail of the captured DNA strand with its complementary strand. This study delineates key predictable parameters that govern the hybridization efficiency of short capture probes arrayed on glass slides. This should be most useful for designing arrays for detection of PCR products and nucleotide polymorphisms.     

Directed covalent immobilization of aminated DNA probes on aminated plates

A new protocol that enables the immobilization of DNA probes on aminated micro-titer plates activated with aldehyde-dextran via an amino group artificially introduced in the 3' end of the oligonucleotide probe is reported in this work. The method is based on the use of hetero-functional-dextran as a long and multifunctional spacer arm covalently attached to an aminated surface capable of immobilizing DNA oligonucleotides. The immobilization occurred only via the amino introduced in the 3' end of the probe, with no implication of the DNA bases in the immobilization, ensuring that the full length of the probe is available for hybridization. These plates having immobilized oligonucleotide probes are able to hybridize complementary DNA target molecules. The tailor-made hetero-functional aldehyde-aspartic-dextran together with the chemical blocking of the remaining primary amino groups on the support using acetic anhydride avoid the nonspecific adsorption of DNA on the surface of the plates. Using these activated plates, (studying the effect of the probe concentration, temperature, and time of the plate activation on the achieved signal), thus, the covalent immobilization of the aminated DNA probe was optimized, and the sensitivity obtained was similar to that achieved using commercial biotin-streptavidin systems. The new DNA plates are stable under very drastic experimental conditions (90% formamide, at 100 degrees C for 30 min or in 100 mM NaOH).     

Specificity of site directed psoralen addition to RNA.

We describe the attachment of a psoralen derivative (site specific psoralen, SSP) to the 5' end of a DNA oligonucleotide and the hybridization and the photoreaction of this reagent with a complementary target site on an RNA molecule. SSP was coupled to a variety of DNA oligonucleotides to investigate the structural requirements for addition to the RNA. Efficient SSP photoadducts were made on specific uridines by designing an intercalation site at an unpaired nucleotide in the RNA strand within the heteroduplex region. The optimal location for this site was five nucleotides from the oligonucleotide 5' end and just 5' to the target uridine residue. Because the attachment of the SSP to the oligonucleotide is through a disulfide bond, the DNA oligonucleotide can be removed with reduction to leave SSP attached to the RNA strand. The SSP adduct made in this way will be useful for subsequent biochemical and biophysical experiments.     

DNA microarrays on a dendron-modified surface improve significantly the detection of single nucleotide variations in the p53 gene

Selectivity and sensitivity in the detection of single nucleotide polymorphisms (SNPs) are among most important attributes to determine the performance of DNA microarrays. We previously reported the generation of a novel mesospaced surface prepared by applying dendron molecules on the solid surface. DNA microarrays that were fabricated on the dendron-modified surface exhibited outstanding performance for the detection of single nucleotide variation in the synthetic oligonucleotide DNA. DNA microarrays on the dendron-modified surface were subjected to the detection of single nucleotide variations in the exons 5–8 of the p53 gene in genomic DNAs from cancer cell lines. DNA microarrays on the dendron-modified surface clearly discriminated single nucleotide variations in hotspot codons with high selectivity and sensitivity. The ratio between the fluorescence intensity of perfectly matched duplexes and that of single nucleotide mismatched duplexes was >5–100 without sacrificing signal intensity. Our results showed that the outstanding performance of DNA microarrays fabricated on the dendron-modified surface is strongly related to novel properties of the dendron molecule, which has the conical structure allowing mesospacing between the capture probes. Our microarrays on the dendron-modified surface can reduce the steric hindrance not only between the solid surface and target DNA, but also among immobilized capture probes enabling the hybridization process on the surface to be very effective. Our DNA microarrays on the dendron-modified surface could be applied to various analyses that require accurate detection of SNPs.     

Individual VH genes detected with oligonucleotide probes from the complementarity-determining regions

The germ-line and expressed Ig repertoire was examined with three oligonucleotide probes from the CDR regions of VH18/2, a VH gene from the largest human VH gene family, VHIII. Each oligonucleotide probe detected small numbers of germ-line bands (1-5) under conditions in which single base differences can be detected; more than half of these bands were polymorphic. The combined results from pairs of oligonucleotides from CDR1 and CDR2 identified a single band on Southern blots, as did a probe from the 5' end of CDR2. This band contains the 18/2 germ-line gene. The nucleotide sequence of expressed VH genes that hybridized to both CDR probes or to the 5' CDR2 probe were greater than or equal to 97% homologous to 18/2 in both the framework and CDR regions. This group of closely related VH genes, the 18/2 CDR family, appears to be overexpressed. The role of polymorphisms and differential expression of individual V genes in multigenic autoimmune diseases, as well as the organization and expression of individual V genes, can be examined with pairs of oligonucleotides from CDR1 and the 3' end of CDR2, or with probes from the 5' end of CDR2.     

Dipstick-type biosensor for visual detection of DNA with oligonucleotide-decorated colored polystyrene microspheres as reporters

In recent years, there is a continuously growing interest in the development of biosensors for rapid, simple and inexpensive DNA tests suitable for the small laboratory or for on-site testing. Detection is accomplished through electrochemical, optical or gravimetric transduction. We report on the development of disposable dipstick-type DNA biosensors that employ oligonucleotide-decorated colored polystyrene microspheres as reporters and enable visual detection of DNA sequences without the use of instrumentation. The biosensors have been designed to detect DNA molecules that contain both, a biotin moiety and a segment that is complementary to the oligonucleotide attached on the surface of blue or red microspheres. Capture of the hybrids by immobilized streptavidin at the test zone results in the formation of a colored line. The biosensors were applied to: (a) detection of single-stranded DNA, (b) detection of PCR-amplified double-stranded DNA and (c) genotyping of single nucleotide polymorphisms (SNP). The results were compared with sensors based on gold nanoparticle reporters. It is also demonstrated that the microspheres offer the potential for multicolor detection of specific DNA sequences.     

两种DNA探针杂交检测结核分支杆菌方法的研究

为改进结核杆菌DNA探针的特异性与实用性,研制了以生物素标记的两种对结核分支杆菌特异的DNA探针:一个5’端标记的20bp的寡核苷酸探针和一个采用PCR方法合成的188bp长链探针。两种探针分别与结核分支杆菌的全染色体DNA,以及基因组上IS6110序列的一段317bp的PCR扩增产物进行斑点杂交,以碱性磷酸酶(AP)催化的染色反应检测,测试了两个探针的敏感性和特异性。系统地比较研究了两种探针杂交检测条件:探针的浓度选择,杂交温度与洗膜温度的选择,以及杂交与洗膜温度对检测的敏感性与特异性的影响。寡核苷酸探针和188bp探针杂交检测纯化结核分支杆菌基因组DNA的敏感性分别为100ng与6ng,杂交检测PCR产物的敏感性分别是400pg与50pg。两探针的最佳杂交浓度均为40～160ng/ml,最佳杂交温度分别是42℃与68℃,最佳洗膜温度分别是60℃与60～68℃之间。两种探针均仅与结核分支杆菌及BCG有杂交信号,而与其它受试分支杆菌及非分支杆菌杂交结果都呈阴性。它们的特异性都很强,但188bp探针的敏感性约是寡核苷酸探针的7～16倍,而且188bp探针检测本底较低,是检测结核分支杆菌的较佳选择     

Oligonucleotide hybridization studied by a surface plasmon diffraction sensor (SPDS)

A novel label-free biosensor concept based on surface plasmon-enhanced diffraction by micro- patterned interfaces was applied to the study of hybridization reactions of target DNA oligonucleotides (15mers and 75mers) from solution to probe DNA oligonucleotides attached via streptavidin to the sensor surface. The self-referencing and quadratic signal amplification mechanism of the sensor allowed highly sensitive detection of the hybridization process. Association and dissociation processes of DNA targets could be recorded in real time and used for the quantification of their binding affinities, which differ considerably with a single base pair mismatch. An equilibrium titration approach was also applied in order to obtain the binding affinities for 15mer targets, yielding similar affinity values. The hybridization efficiencies were found to be higher for the 15mers than for the 75mers, although the latter contained the same recognition sequences. The hybridization efficiency was shown to depend on the probe density and reached nearly 100% for the 15mer fully complementary targets at a probe density of ~1.2 × 10¹² molecules/cm². Using the assay as an end-point determination method, the lowest detectable coverage of a 15mer oligonucleotide was at least ~1.1 × 10¹¹ molecules/cm². The diffraction sensing concept offers a completely novel way to integrate a reference channel in large-scale, label-free screening applications, to improve the stability and to enhance the sensitivity of microarray read-out systems.     

Probe amplifier system based on chimeric cycling oligonucleotides

Amplification systems are required as part of DNA probe technology, since traditional non-amplified oligonucleotide hybridization using nonradioactive detection methods have detection limits of approximately 10(8) molecules. We present a probe amplifier technology suitable for use in large-scale automated clinical diagnostic systems. It is fast, sensitive and performs at a constant temperature. The system functions by allowing a single target molecule to act as a catalyst in converting a large number of probe molecules to a unique detectable form. We refer to this catalytic amplification process as the "cycling probe reaction." The basis of the system is an oligomer probe construction consisting of a DNA-RNA-DNA sequence.