Fatty acid transport and activation and the expression patterns of genes involved in fatty acid trafficking

These studies defined the expression patterns of genes involved in fatty acid transport, activation and trafficking using quantitative PCR (qPCR) and established the kinetic constants of fatty acid transport in an effort to define whether vectorial acylation represents a common mechanism in different cell types (3T3-L1 fibroblasts and adipocytes, Caco-2 and HepG2 cells and three endothelial cell lines (b-END3, HAEC, and HMEC)). As expected, fatty acid transport protein (FATP)1 and long-chain acyl CoA synthetase (Acsl)1 were the predominant isoforms expressed in adipocytes consistent with their roles in the transport and activation of exogenous fatty acids destined for storage in the form of triglycerides. In cells involved in fatty acid processing including Caco-2 (intestinal-like) and HepG2 (liver-like), FATP2 was the predominant isoform. The patterns of Acsl expression were distinct between these two cell types with Acsl3 and Acsl5 being predominant in Caco-2 cells and Acsl4 in HepG2 cells. In the endothelial lines, FATP1 and FATP4 were the most highly expressed isoforms; the expression patterns for the different Acsl isoforms were highly variable between the different endothelial cell lines. The transport of the fluorescent long-chain fatty acid C₁-BODIPY-C₁₂ in 3T3-L1 fibroblasts and 3T3-L1 adipocytes followed typical Michaelis–Menten kinetics; the apparent efficiency (k_cat/K_T) of this process increases over 2-fold (2.1 × 10⁶–4.5 × 10⁶ s⁻¹ M⁻¹) upon adipocyte differentiation. The V_max values for fatty acid transport in Caco-2 and HepG2 cells were essentially the same, yet the efficiency was 55% higher in Caco-2 cells (2.3 × 10⁶ s⁻¹ M⁻¹ versus 1.5 × 10⁶ s⁻¹ M⁻¹). The kinetic parameters for fatty acid transport in three endothelial cell types demonstrated they were the least efficient cell types for this process giving V_max values that were nearly 4-fold lower than those defined form 3T3-L1 adipocytes, Caco-2 cells and HepG2 cells. The same cells had reduced efficiency for fatty acid transport (ranging from 0.82 × 10⁶ s⁻¹ M⁻¹ to 1.35 × 10⁶ s⁻¹ M⁻¹).     

Direct oxidation of boronates by peroxynitrite: Mechanism and implications in fluorescence imaging of peroxynitrite

In this study, we show that boronates, a class of synthetic organic compounds, react rapidly and stoichiometrically with peroxynitrite (ONOO⁻) to form stable hydroxy derivatives as major products. Using a stopped-flow kinetic technique, we measured the second-order rate constants for the reaction with ONOO⁻, hypochlorous acid (HOCl), and hydrogen peroxide (H₂O₂) and found that ONOO⁻ reacts with 4-acetylphenylboronic acid nearly a million times (k = 1.6 × 10⁶ M^− 1 s^− 1) faster than does H₂O₂ (k = 2.2 M^− 1 s^− 1) and over 200 times faster than does HOCl (k = 6.2 × 10³ M^− 1 s^− 1). Nitric oxide and superoxide together, but not alone, oxidized boronates to the same phenolic products. Similar reaction profiles were obtained with other boronates. Results from this study may be helpful in developing a novel class of fluorescent probes for the detection and imaging of ONOO⁻ formed in cellular and cell-free systems.     

Kinetic analyses for bindings of concanavalin A to dispersed and condensed mannose surfaces on a quartz crystal microbalance

A biotinylated mannotriose (Man3-bio) was dispersively immobilized in the matrix of biotinylated lactose (Gal-Glc-bio) on a streptavidin-covered, 27-MHz quartz crystal microbalance (QCM), and binding kinetics of concanavalin A (Con A) to Man3-bio in the Gal-Glc-bio matrix could be obtained from frequency decreases (mass increases) of the QCM. Association constants (K_a) and binding and dissociation rate constants (k_on and k_off) could be determined separately as the 1:1 and 1:2 bindings of Con A to Man3-bio on the surface. When Man3-bio was immobilized with content of 1 to 5 mol% in the matrix, the 1:1 binding of Con A to Man3-bio was obtained as K_a = (4 ± 1) × 10⁶ M⁻¹, k_on = (4 ± 1) × 10⁴ M⁻¹ s⁻¹, and k_off = (12 ± 2) × 10^–3 s⁻¹. On the contrary, when Man3-bio was immobilized with content of 20 to 100 mol% in the matrix, the 1:2 binding of Con A to Man3-bio was obtained as K_a = (14 ± 2) × 10⁶ M⁻¹, k_on = (14 ± 2) × 10⁴ M⁻¹ s⁻¹, and k_off = (7 ± 2) × 10^–3 s⁻¹. Thus, K_a for the 1:2 binding was 10 times larger than that for the 1:1 binding, with a three times larger binding rate constant (k_on) and a three times smaller dissociation rate constant (k_off). This is the first example to obtain separate kinetic parameters for the 1:1 and 1:2 bindings of lectins to carbohydrates on the surface.     

Quantification of hydrogen peroxide and glucose using 3-methyl-2-benzothiazolinonehydrazone hydrochloride with 10,11-dihydro-5H-benz(b,f)azepine as chromogenic probe

A sensitive, selective, and rapid enzymatic method is proposed for the quantification of hydrogen peroxide (H₂O₂) using 3-methyl-2-benzothiazolinonehydrazone hydrochloride (MBTH) and 10,11-dihydro-5H-benz(b,f)azepine (DBZ) as chromogenic cosubstrates catalyzed by horseradish peroxidase (HRP) enzyme. MBTH traps free radical released during oxidation of H₂O₂ by HRP and gets oxidized to electrophilic cation, which couples with DBZ to give an intense blue-colored product with maximum absorbance at 620 nm. The linear response for H₂O₂ is found between 5 × 10⁻⁶ and 45 × 10⁻⁶ mol L⁻¹ at pH 4.0 and a temperature of 25 °C. Catalytic efficiency and catalytic power of the commercial peroxidase were found to be 0.415 × 10⁶ M⁻¹ min⁻¹ and 9.81 × 10⁻⁴ min⁻¹, respectively. The catalytic constant (k_cat) and specificity constant (k_cat/K_m) at saturated concentration of the cosubstrates were 163.2 min⁻¹ and 4.156 × 10⁶ L mol⁻¹ min⁻¹, respectively. This method can be incorporated into biochemical analysis where H₂O₂ undergoes catalytic oxidation by oxidase. Its applicability in the biological samples was tested for glucose quantification in human serum.     

Characterization and properties of catalase immobilized onto controlled pore glass and its application in batch and plug-flow type reactors

Bovine liver catalase was covalently immobilized onto controlled pore glass (CPG) beads modified with 3-aminopropyltriethoxysilane (3-APTES) followed by treatment with glutaraldehyde. Coupling of catalase onto CPG was optimized to improve the efficiency of the overall immobilization procedure. The optimum coupling conditions: pore diameter of CPG, pH, buffer concentration, temperature, coupling time and initial catalase amount per grams of carrier were determined as 70 nm, 6.0, 75 mM, 5 °C, 7 h and 6 mg catalase, respectively. Catalytic efficiencies (k_cat/K_m) and thermal inactivation rate constants (k_i) of ICPG1 were determined and compared with that of free catalase. Suitability of ICPG1 was also investigated by using it in batch and plug-flow type reactors. When the remaining activity of ICPG1 retained was about 50% of its initial activity the highest total productivity of ICPG1 was determined as 7.6 × 10⁶ U g immobilized catalase⁻¹ in plug-flow type reactor. However, the highest total productivity of ICPG1 was 6.2 × 10⁵ U g immobilized catalase⁻¹ in batch type reactor. ICPG1 may have great potentials as biocatalyst for the application in decomposition of hydrogen peroxide in plug-flow type reactor.     

Cation binding to β-casein. a comparison of electrostatic models

The binding of cations of β-casein at pH 6.6 was considered previously. Available for three sodium concentiations, I = 0.04, 0.08, or 0.16 M are: [1] proton releases between I and [2] for each I, as calcium activity is increased, correlated sequences of monomer net charge, proton release, site bound calcium and protein Solvation- Models for ion binding are examined. Critical considerations are the intrinsic binding constants between hydrogen[H], calcium[Ca] and sodium[Na] ions and phosphate[P] and caiboxyIate[C] sites, and the effects of electrostatic interaction between sites as influenced by spatial fixed charge distribution, ionic strength and dielectric constant [D]. Anticipated intrinsic binding constants are k_H,P^o = 3 × 10⁶, k_Ca,P^o = 120, k_Na,P^o = 1, k_H,C^o = 7 × 10⁴ and k_Ca,C^o = 5.6Distributed charge models, either surface or volume, are inadequate since any reasonable monomer size yields fixed charge densities requiring k_H,P^o and k_Ca,C^o which are too low when the maximum in D is 75. Also, with increasing calcium binding, calculated proton release is only 0.4 to 0.5 of that observed.Discrete charge models accept anticipated k^o and yield calculated sequences of calcium binding and proton release which are in good agreement with those observed provided that: (1) using the known amino acid sequence of the phosphate-containing acidic peptide portion of the molecule, pep tide fixed charge is distributed at the lowest I so as to minimize electrostatic free energy; (2) in the region of fixed charge, D is approximately 5; (3) the distances between peptide fixed charges decrease with increasing ionic strength or calcium binding and (4) while protein is in solution, the acidic peptide and the remainder of the molecule are essentially electrostatically independent.     

Laccase-catalyzed oxidation of phenolic compounds in organic media

Rhus vernificera laccase-catalyzed oxidation of phenolic compounds, i.e., (+)-catechin, (−)-epicatechin and catechol, was carried out in selected organic solvents to search for the favorable reaction medium. The investigation on reaction parameters showed that optimal laccase activity was obtained in hexane at 30 °C, pH 7.75 for the oxidation of (+)-catechin as well as for (−)-epicatechin, and in toluene at 35 °C, pH 7.25 for the oxidation of catechol. E_a and Q₁₀ values of the biocatalysis in the reaction media of the larger log p solvents like isooctane and hexane were relatively higher than those in the reaction media of lower log p solvents like toluene and dichloromethane. Maximum laccase activity in the organic media was found with 6.5% of buffer as co-solvent. A wider range of 0–28 μg protein/ml in hexane than that of 0–16.7 μg protein/ml in aqueous medium was observed for the linear increasing conversion of (+)-catechin. The kinetic studies revealed that in the presence of isooctane, hexane, toluene and dichloromethane, the K_m values were 0.77, 0.97, 0.53 and 2.9 mmol/L for the substrate of (+)-catechin; 0.43, 0.34, 0.14 and 3.4 mmol/L for (−)-epicatechin; 2.9, 1.8, 0.61 and 1.1 mmol/L for catechol, respectively, while the corresponding V_max values were 2.1 × 10⁻², 2.3 × 10⁻², 0.65 × 10⁻² and 0.71 × 10⁻² δA/μg protein min); 1.8 × 10⁻², 0.88 × 10⁻², 0.19 × 10⁻² and 1.0 × 10⁻² δA/μg protein min); 0.48 × 10⁻², 0.59 × 10⁻², 0.67 × 10⁻² and 0.54 × 10⁻² δA/μg protein min), respectively. FT-IR indicated the formation of probable dimer from (+)-catechin in organic solvent. These results suggest that this laccase has higher catalytic oxidation capacity of phenolic compounds in suitable organic media and favorite oligomers could be obtained.     

Chemical stability of prostacyclin (PGI2) in aqueous solutions

The rate constant for the hydrolysis of prostacyclin (PGI₂) to 6-keto-PGF_1α was measured by monitoring the UV spectral change, over a pH range 6 to 10 at 25°C and the total ionic strength of 0.5 M. The first-order rate constant (k_obs) extrapolated to zero buffer concentration follows an expression, k_obs = k_H+ (H+), where k_H+ is a second-order rate constant for the specific acid catalyzed hydrolysis. The value of k_H+ obtained (3.71 × 10⁴ sec⁻¹ M⁻¹) is estimated approximately 700-fold greater than a k_H+ value expected from the hydrolysis of other vinyl ethers. Such an unusually high reactivity of PGI₂ even for a vinyl ether is attributed to a possible ring strain release that would occur upon the rate controlling protonation of C₅. A Brønsted slope (α) of 0.71 was obtained for the acid (including H₃O+) catalytic constants, from which a pH independent first-order rate constant for the spontaneous hydrolysis (catalyzed by H₂O as a general acid) was estimated to be 1.3 × 10⁻⁶ sec⁻¹. An apparent activation energy (E_a) of 11.85 Kcal/mole was obtained for the hydrolysis at pH 7.48, from which a half-life of PGI₂ at 4°C was estimated to be approximately 14.5 min. when the total phosphate concentration is 0.165 M (cf. 3.5 min. at 25°C).     

Characterization of galactomannans isolated from legume endosperms of Caesalpinioideae and Faboideae subfamilies by multidetection aqueous SEC

Galactomannans isolated from legume seed endosperms, including those of commercial interest, have been characterized by multidetection aqueous SEC. Galactomannans derived from seeds of the Faboideae subfamily had substantially higher M_w than those from Caesalpinioideae seeds (M_w,Fab = 2.4–3.1 × 10⁶ g/mol, M_w,Caes. = 0.86–2.1 × 10⁶ g/mol) and within the latter botanical subfamily, an apparent correlation between M_w and the degree of galactose substitution DG was found. The molar mass distributions were unimodal and differed primarily by a scale factor, with distributional widths narrower than a true Flory ‘most-probable distribution’; good fits to Schulz–Zimm model were obtained. Across subfamilies no differences were found in the exponents of [η]–M and R_v–M relationships (0.61 ± 0.02, 0.54 ± 0.01, respectively), the Flory chain stiffness ratio (C_∞ = 20 ± 1 (BSF analysis)), or the persistence length (L_p = 5.5 ± 0.2 nm) obtained from SEC fraction data. However, it was found that prefactors in the [η]–M and R_v–M relationships as well as the unperturbed parameter K_Θ decrease in proportion to DG and therefore chain density. Generalized relationships incorporating galactose-dependent prefactors were therefore developed to model SEC fraction data of native galactomannans ([η]_GM = (1800 ± 200) × M_o^−1.61 × M^0.61±0.02, R_v,GM = 0.63 ± 0.05 × M_o^−0.54 × M^0.54±0.01) as well as lower-M fractions obtained by ultrasonication ([η]_GM = (730 ± 100) × M_o^−1.71 × M_w^0.71±0.02, R_v,GM = 0.49 ± 0.05 × M_o^−0.57 × M_w^0.57±0.01, M ≈ 1 × 10⁵-native). As a consequence of this dependence and the observed patterns in molar mass variation, [η] varies within a narrow range for galactomannans as a whole despite substantial M_w differences.     

Pine nut peroxidase immobilized on chitosan crosslinked with citrate and ionic liquid used in the construction of a biosensor

A biosensor based on the ionic liquid 1-butyl-3-methylimidazolium bis(trifluoromethylsulfonyl)imide (BMI·Tf₂N) and a novel source of peroxidase (tissue from the pine nuts of Araucaria angustifolia) was constructed. This enzyme was immobilized on chitosan crosslinked with citrate and the biosensor used for the determination of rosmarinic acid by square-wave voltammetry. The peroxidase in the presence of hydrogen peroxide catalyzes the oxidation of rosmarinic acid to quinone and the electrochemical reduction of the product was obtained at a potential of +0.15 V vs. Ag/AgCl. Different analytical parameters influencing the biosensor response, that is, peroxidase units, pH, hydrogen peroxide concentration and parameters for the square-wave voltammetry (frequency, pulse amplitude and scan increment), were investigated. The best performance was observed for the biosensor under the following conditions: 1000 units mL⁻¹ peroxidase, pH 7.0 and 8.3 × 10⁻⁴ mol L⁻¹ hydrogen peroxide with a frequency of 30 Hz, pulse amplitude of 100 mV and scan increment of 5.0 mV. The biosensor gave a linear response to rosmarinic acid over the concentration range of 9.07 × 10⁻⁷ to 4.46 × 10⁻⁶ mol L⁻¹ with a detection limit of 7.25 × 10⁻⁸ mol L⁻¹. The recovery of rosmarinic acid in plant extracts ranged from 97.0% to 109.6% and the determination of this substance in these samples using the biosensor compared favorably with that using the capillary electrophoresis method.     

Ascaris suum NADH-methemo(myo)globin reductase systems recovering differential functions of hemoglobin and myoglobin, adapting to environmental hypoxia

We reported previously that Ascaris suum cytochrome b₅, specifically expressed in this nematode at the adult stage and dually localized in extracellular perienteric fluid and hypodermis, is involved in both perienteric NADH-methemoglobin and cytosolic NADH-metmyoglobin reduction, where cytochrome b₅ functions as an electron carrier between NADH-mediated cytochrome b₅ reductase and substrates, methemo(myo)globins to reduce the nonfunctional globins back to functional ferrous hemo(myo)globins. To further characterize NADH-methemo(myo)globin reductase systems, the midpoint potentials of A. suum perienteric hemoglobin and body wall myoglobin, as well as the affinities of Ascaris methemoglobin and metmyoglobin toward cytochrome b₅, were evaluated using potentiometric titration and surface plasmon resonance techniques, respectively. Midpoint potentials of + 7.2 mV and + 19.5 mV were obtained for Ascaris perienteric hemoglobin and body wall myoglobin, respectively. The affinities of Ascaris perienteric methemoglobin and body wall metmyoglobin toward the nematode cytochrome b₅ were comparable to that for mammalian hemoglobin and cytochrome b₅; association constants were 0.585 × 10³ M^− 1 and 2.32 × 10³ M^− 1, respectively, with rapid equilibration kinetics. These observations highlight the physiological importance of A. suum perienteric NADH-methemoglobin and cytosolic metmyoglobin reductase systems. Differential roles of A. suum perienteric hemoglobin and body wall myoglobin are also discussed from the viewpoint of oxygen homeostasis under hypoxic conditions.     

Glucose biosensor based on immobilization of glucose oxidase in poly(o-aminophenol) film on polypyrrole-Pt nanocomposite modified glassy carbon electrode

Novel Pt nanoclusters embedded polypyrrole nanowires (PPy-Pt) composite was electrosynthesized on a glassy carbon electrode, denoted as PPy-Pt/GCE. A glucose biosensor was further fabricated based on immobilization of glucose oxidase (GOD) in an electropolymerized non-conducting poly(o-aminophenol) (POAP) film that was deposited on the PPy-Pt/GCE. The morphologies of the PPy nanowires and PPy-Pt nanocomposite were characterized by field emission scanning electron microscope (FE-SEM). Effect of experimental conditions involving the cycle numbers for POAP deposition and Pt nanoclusters deposition, applied potential used in glucose determination, temperature and pH value of the detection solution were investigated for optimization. The biosensor exhibited an excellent current response to glucose over a wide linear range from 1.5 × 10⁻⁶ to 1.3 × 10⁻² M (r = 0.9982) with a detection limit of 4.5 × 10⁻⁷ M (s/n = 3). Based on the combination of permselectivity of the POAP and the PPy films, the sensor had good anti-interference ability to ascorbic acid (AA), uric acid (UA) and acetaminophen. The apparent Michaelis–Menten constant (K_m) and the maximum current density (I_m) were estimated to be 23.9 mM and 378 μA/cm², respectively. In addition, the biosensor had also good sensitivity, stability and reproducibility.     

Molecular mass and chain conformations of Rhizoma Panacis Japonici polysaccharides

The molecular mass and size of five water-soluble polysaccharides isolated from Rhizoma Panacis Japonici (RPJ) were determined with laser light scattering (LLS), size-exclusion chromatography (SEC) combined with LLS (SEC–LLS), dynamic light scattering (DLS), as well as transmission electron microscope (TEM). Their weight-average molecular masses (M_w) were 3.5 × 10⁴, 1.47 × 10⁵, 1.24 × 10⁶, 9.26 × 10⁵ and 1.36 × 10⁶, radii of gyration (<s²>_z^1/2) were 14.7, 31.7, 50.8, 41.8 and 40.4 nm, and hydrodynamic radii (R_h) were 19.9, 37.5, 66.2, 52.1, and 55.2 nm, respectively. The results showed that molecular masses and sizes of the polysaccharides were influenced by the pH and temperature of the extraction mediums. The conformation parameters were calculated from the above data according to polymer solution theory. The values of ρ (= <s²>_z^1/2/R_h) were from 0.7 to 0.8, exponents (ν) of <s²>_z^1/2 = k M_w^ν were from 0.31 to 0.43, and fractal dimension (d_f) were from 2.3 to 3.2, respectively. The results revealed that all of the polysaccharides existed as spheres in 0.15 M NaCl aqueous solution. TEM and atomic force microscope (AFM) further confirmed the spherical morphologies of these molecules. The spherical conformations of the polysaccharides were a result of their highly branched structures.     

Effect of dietary chitosans on trace iron, copper and zinc in mice

Dietary chitosans with different molecular weight M_w and the degree of deacetylation DDA (high molecular weight chitosan HCS with M_w 7.60 × 10⁵ and DDA 85.5%, middle molecular weight chitosan MCS with M_w 3.27 × 10⁴ and DDA 85.2%, chito-oligomer COS with M_w 0.99 × 10³ and DDA 85.7% and water-soluble chitosan WSC with M_w 3.91 × 10⁴ and DDA 52.6%) were used at the 1.05% level to feed mice for 90 days. Afterwards no pathological symptoms, clinical signs or deaths were observed. The body weight of mice in chitosan group and control group showed no significant difference. Although HCS, COS and WSC had no significant effect on the level of Fe, Zn and Cu in the tested mice’s liver, spleen, heart and kidney, MCS significantly increased the level of Fe, Zn and Cu in liver. Therefore dietary ingestion of chitosan did not depress the level of Fe, Zn and Cu in mice.     

Kinetics parameter estimation for the binding process of salicylic acid to human serum albumin (HSA) with capacitive sensing technique

A novel method for real-time investigating the binding interaction between human serum albumin (HSA) and salicylic acid with capacitive sensing technique was successfully proposed. HSA was immobilized on the surface of a gold electrode modified with an insulating poly (o-phenylenediamine) (o-PD) film and colloid Au nanoparticles layers. The bioactivity of HSA was remained and major binding sites were available because of the excellent biocompatibility of gold nanoparticles. The capacitance and interfacial electron resistance of the sensor were altered, owing to the binding of HSA to salicylic acid. The time courses of the capacitance change were acquired with capacitive sensing technique during the binding process. Based on the capacitance response curves with time, the response model for the binding was derived in theory and the corresponding regression parameters were determined by fitting the real-time experimental data to the model. The binding and the dissociation rate constants (k₁ and k_− 1) were estimated to be 54.8 (mol l^− 1)^− 1 s^− 1 and 2.9 × 10^− 3 s^− 1, respectively. And the binding equilibrium constant (K_a) was calculated to be 1.89 × 10⁴ (mol l^− 1)^− 1.     

Polyphenolic Antioxidants Efficiently Protect Urease from Inactivation by Ultrasonic Cavitation

Inactivation of urease (25 nM) in aqueous solutions (pH 5.0–6.0) treated with low-frequency ultrasound (LFUS; 27 kHz, 60 W/cm², 36–56°C) or high-frequency ultrasound (HFUS; 2.64 MHz, 1 W/cm², 36 or 56°C) has been characterized quantitatively, using first-order rate constants: k _in, total inactivation; k _in ^*, thermal inactivation; and k _in(us), ultrasonic inactivation. Within the range from 1 nM to 10 M, propyl gallate (PG) decreases by approximately threefold the rate of LFUS-induced inactivation of urease (56°C), whereas resorcinol poly-2-disulfide stops this process at 1 nM or higher concentrations. PG completely inhibits HFUS-induced inactivation of urease at 1 nM (36°C) or 10 nM (56°C). At 0.2–1.0 M, human serum albumin (HSA) increases the resistance of urease treated with HFUS to temperature- and cavitation-induced inactivation. Complexes of gallic acid polydisulfide (GAPDS) with HSA (GAPDS–HSA), formed by conjugation of 1.0 nM GAPDS with 0.33 nM HSA, prevent HFUS-induced urease inactivation (56°C).     

Efficient hydrolysis of chitosan in ionic liquids

Effective hydrolysis of chitosan, the N-deacetylated product of chitin, remains challenging. Here, we report acid-promoted hydrolysis of chitosan in imidazolium based ionic liquids with good total reducing sugars (TRS) yield under mild conditions. TRS yield reached over 60% in the presence of about 6.0 wt% concentrated hydrochloric acid at 100 °C within 7 h. Kinetic modeling of a typical experimental data set suggested that the hydrolysis most likely followed a consecutive first-order reaction sequence, where k₁ and k₂, the rate constants for TRS formation and degradation, were determined to be 0.01372 and 0.00015 min⁻¹, respectively. Our method may be useful to explore new applications of natural chitin resources.     

Direct ab initio dynamics studies of the hydrogen abstraction reactions of hydrogen atom with n-propyl radical and isopropyl radical

The kinetics of the hydrogen abstraction reactions of hydrogen atom with n-propyl radical and isopropyl radical were studied using the direct ab initio dynamics approach. BHandHLYP/cc-pVDZ method was employed to optimize the geometries of stationary points as well as the points on the minimum energy path (MEP). The energies of all the points for the two reactions were further refined at the QCISD(T)/cc-pVTZ level of theory. No barrier was found at the QCISD(T)/cc-pVTZ//BHandHLYP/cc-pVDZ level of theory for both reactions. The forward and reverse rate constants were evaluated with both canonical variational transition state theory (CVT) and microcanonical variational transition state theory ( VT) in the temperature range of 300–2,500 K. The fitted three-parameter Arrhenius expression of the calculated CVT rate constants at the QCISD(T)/cc-pVTZ//BHandHLYP/cc-pVDZ level of theory are k^CVT (n – C₃H₇)=1.68×10^–14 T^0.84 e^(319.5/T) cm³ molecule^–1 s^–1 and k^CVT (iso-C₃H₇)=4.99×10^–14 T^0.90 e^(159.5/T) cm³ molecule^–1 s^–1 for reactions of n-C₃H₇ + H and iso-C₃H₇ + H, respectively, which are in good agreement with available literature data. The variational effects were analysed.Figure Comparison of the calculated forward rate constants at the QCISD(T)/cc-pVTZ//BHandHLYP/cc-pVDZ level of theory and the available experimental and theoretical data of the reaction vs 1,000/T for the two reactions.     

PEGylation of rhIL-1RA increased its solution stability at room temperature

Recombinant human interleukin-1 receptor antagonist (rhIL-1RA) is an important cytokine in the treatment of inflammatory diseases. However, it is instable in aqueous solution and prone to degrade without the addition of any excipient. Following the 30- or 60-day storage in 50 mM sodium acetate (pH 5.0) at room temperature, rhIL-1RA markedly degraded into three species (denoted as P1, P2 and P3 in this study), the bioactivities of which to a different extent was lost (from 9.72 × 10⁴ UI/mg to 3.07 × 10³ UI/mg for P1, 5.49 × 10³ UI/mg for P2, 1.09 × 10⁴ UI/mg for P3, respectively). To solve this problem, we prepared the mono-PEGylated rhIL-1RA with propionaldehyde mPEG (ALD-PEG, M_w 5000 Da). The conjugate showed more favorable stability than original protein, and remained homogeneous under the similar storage conditions. In addition, the activity of the conjugate was well retained (from 5.80 × 10⁴ UI/mg to 4.92 × 10⁴ UI/mg), compared to that of original protein. The results based on the combination analysis of CD, ion exchange chromatography and RP-HPLC, revealed that the stability improvement of rhIL-1RA majorly benefited from the PEG strands protection against the protein conformational changes occurred during the storage.     

Rheological properties of concentrated solutions of gellan in an ionic liquid

The rheological properties of solutions of gellan were examined at high concentrations where there is entanglement coupling between gellan chains. An ionic liquid 1-butyl-3-methylimidazolium chloride (BmimCl) was used as a solvent. Concentrated solutions of gellan in BmimCl were obtained by using a hot-molding technique. The concentration of gellan was varied from 1.9 × 10² to 4.8 × 10² kg m⁻³. The measurement temperature ranged from 50 to 100 °C. The master curve of the angular frequency dispersion of the storage modulus for the gellan solutions showed a rubbery plateau at high angular frequency. The molecular weight between entanglements (M_e) for gellan was obtained from the plateau modulus. From the concentration dependence curve of M_e, M_e for gellan in the molten state was determined to be 2.3 × 10³.