Draft Genome Sequence of the Hydrocarbon-Degrading and Emulsan-Producing Strain Acinetobacter venetianus RAG-1T

We report the draft genome sequence of Acinetobacter venetianus strain RAG-1(T), which is able to degrade hydrocarbons and to synthesize a powerful biosurfactant (emulsan) that can be employed for oil removal and as an adjuvant for vaccine delivery. The genome sequence of A. venetianus RAG-1(T) might be useful for bioremediation and/or clinical purposes.     

Engineering bacterial biopolymers for the biosorption of heavy metals; new products and novel formulations

Bioremediation of heavy metal pollution remains a major challenge in environmental biotechnology. One of the approaches considered for application involves biosorption either to biomass or to isolated biopolymers. Many bacterial polysaccharides have been shown to bind heavy metals with varying degrees of specificity and affinity. While various approaches have been adopted to generate polysaccharide variants altered in both structure and activity, metal biosorption has not been examined. Polymer engineering has included structural modification through the introduction of heterologous genes of the biosynthetic pathway into specific mutants, leading either to alterations in polysaccharide backbone or side chains, or to sugar modification. In addition, novel formulations can be designed which enlarge the family of available bacterial biopolymers for metal-binding and subsequent recovery. An example discussed here is the use of amphipathic bioemulsifiers such as emulsan, produced by the oil-degrading Acinetobacter lwoffii RAG-1, that forms stable, concentrated (70%), oil-in-water emulsions (emulsanosols). In this system metal ions bind primarily at the oil/water interface, enabling their recovery and concentration from relatively dilute solutions. In addition to the genetic modifications described above, a new approach to the generation of amphipathic bioemulsifying formulations is based on the interaction of native or recombinant esterase and its derivatives with emulsan and other water-soluble biopolymers. Cation-binding emulsions are generated from a variety of hydrophobic substrates. The features of these and other systems will be discussed, together with a brief consideration of possible applications. Received: 2 February 2000 / Received revision: 2 June 2000 / Accepted: 3 June 2000     

Discovery of the dual polysaccharide composition of emulsan and the isolation of the emulsion stabilizing component

Emulsan has been reported as an emulsion stabilizing amphipathic lipoheteropolysaccharide secreted by the oil-degrading bacterium Acinetobacter venetianus RAG-1. Previously, emulsan was regarded as a single polymer. As a result of developing a new purification process, we have discovered that emulsan is a complex of approximately 80% (w/w) lipopolysaccharide (LPS) and 20% (w/w) high molecular weight exopolysaccharide (EPS). The EPS was purified to 98% (w/w) using tangential flow filtration, Triton X-114 phase extraction, ammonium sulfate precipitation, and hydrophobic interaction chromatography. Several previously reported physical properties of emulsan can be attributed to the LPS fraction, such as charge, fatty acid profile, and solution behavior, while the EPS is responsible for the emulsion stabilization activity. The EPS is believed to be cationic in nature, thus providing an electrostatic binding mechanism for the formation of the emulsan complex.     

Bacterial degradation of emulsan.

Emulsan is a polyanionic heteropolysaccharide bioemulsifier produced by Acinetobacter calcoaceticus RAG-1. A mixed bacterial population was obtained by enrichment culture that was capable of degrading emulsan and using it as a carbon source. From this mixed culture, an emulsan-degrading bacterium, termed YUV-1, was isolated. Strain YUV-1 is an aerobic, gram-negative, non-spore-forming, rod-shaped bacterium which grows best in media containing yeast extract. When placed on preformed lawns of A. calcoaceticus RAG-1, strain YUV-1 produced translucent plaques which grew in size until the entire plate was covered. Plaque formation was due to solubilization of the emulsan capsule of RAG-1. Plaque formation was not observed on emulsan-negative mutants of RAG-1. As a consequence of the solubilization of the emulsan capsule, RAG-1 cells became more hydrophobic, as determined by adherence to hexadecane. Growth of YUV-1 on a medium containing yeast extract and emulsan was biphasic. During the initial 24 h, cell concentration increased 10-fold, but emulsan was not degraded; during the lag in growth (24 to 48 h), emulsan was inactivated and depolymerized but not consumed; during the second growth phase (48 to 70 h) the depolymerized emulsan products were consumed.     

Bacterial degradation of emulsan

Emulsan is a polyanionic heteropolysaccharide bioemulsifier produced by Acinetobacter calcoaceticus RAG-1. A mixed bacterial population was obtained by enrichment culture that was capable of degrading emulsan and using it as a carbon source. From this mixed culture, an emulsan-degrading bacterium, termed YUV-1, was isolated. Strain YUV-1 is an aerobic, gram-negative, non-spore-forming, rod-shaped bacterium which grows best in media containing yeast extract. When placed on preformed lawns of A. calcoaceticus RAG-1, strain YUV-1 produced translucent plaques which grew in size until the entire plate was covered. Plaque formation was due to solubilization of the emulsan capsule of RAG-1. Plaque formation was not observed on emulsan-negative mutants of RAG-1. As a consequence of the solubilization of the emulsan capsule, RAG-1 cells became more hydrophobic, as determined by adherence to hexadecane. Growth of YUV-1 on a medium containing yeast extract and emulsan was biphasic. During the initial 24 h, cell concentration increased 10-fold, but emulsan was not degraded; during the lag in growth (24 to 48 h), emulsan was inactivated and depolymerized but not consumed; during the second growth phase (48 to 70 h) the depolymerized emulsan products were consumed.     

Production of emulsan in a fermentation process using soybean oil (SBO) in a carbon-nitrogen coordinated feed

A fermentation process for the microbial production of an amphipatic lipopolysaccharide, emulsan, has been established using a triglyceride carbon source in a coordinated carbon-nitrogen feed strategy. The polysaccharide was produced by the Acinetobacter strain at a productivity of about 0.5 g emulsan/L h while utilizing only the fatty acids (FA) portion of the triglycerides or free fatty acids that were fed into the medium.A useful correlation between the utilization of the fatty acids and the consumption of the nitrogen was found and employed for the practical feed strategy using an appropriate C--N ratio (7.7 g C/g N) of the soybeanoil (SBO) (carbon source) to the ammonium hydroxide base (nitrogen source). Either the pH control or the supervising computer system could accomplish the adequate balanced feed in to the fermentor. Lipolysis slowdown was overcome by switching from a triglyceride carbon source to a free fatty acids one. A yield of about 0.2 g emulsan/g fatty acids was obtained and a final concentration of over 20 g/L was reached. The polymeric product was found to be partially associated with the cell-oil complexes in the fermentation broth unless the oily carbon source was efficiently exhausted. A fedbatch fermentation that employed a shift of the carbon source feed from triglycerides to free fatty acids appeared to be an appropriate and feasible way of producing the polymer.     

Conversion of agricultural feedstock and coproducts into poly(hydroxyalkanoates)

Aside from their importance to the survival and general welfare of mankind, agriculture and its related industries produce large quantities of feedstocks and coproducts that can be used as inexpensive substrates for fermentative processes. Successful adoption of these materials into commercial processes could further the realization of a biorefinery industry based on agriculturally derived feedstocks. One potential concept is the production of poly(hydroxyalkanoate) (PHA) polymers, a family of microbial biopolyesters with a myriad of possible monomeric compositions and performance properties. The economics for the fermentative production of PHA could benefit from the use of low-cost agricultural feedstocks and coproducts. This mini-review provides a brief survey of research performed in this area, with specific emphasis on studies describing the utilization of intact triacylglycerols (vegetable oils and animal fats), dairy whey, molasses, and meat-and-bone meal as substrates in the microbial synthesis of PHA polymers.Mention of trade names or commercial products in this article is solely for the purpose of providing specific information and does not imply recommendation or endorsement by the U.S. Department of Agriculture.     

Properties of hydrocarbon-in-water emulsions stabilized by Acinetobacter RAG-1 emulsan

Emulsan is a polymeric extracellular emulsifying agent produced by Acinetobacter RAG-1. Hydrocarbon-in-water emulsions (V(f) of hydrocarbon of 0.01-0.10) were stabilized by small quantities of emulsan (0.02-0.2 mg/mL). Although both aliphatic and aromatic hydrocarbon emulsions were stabilized by emulsan, mixtures containing both aliphatics and aromatics were better substrates for emulsan than the individual hydrocarbon by themselves. The emulsan remained tightly bound to the hydrocarbon even after centrifugation as determined by (a) residual emulsan in the aqueous phase and (b) the fact that the resulting "cream" readily dispersed in water to reform stable emulsions. With hexadecane-to-emulsan weight ratio of 39 and 155, the noncoalescing oil droplets had average droplet diameters of 2.0 and 4.0 mum, respectively. Dialysis studies showed that the water-soluble dye Rhodamine B adsorbed tightly to the interface of hexadecane-emulsan droplets although the dye did not bind to either hexadecane or emulsan alone. At saturating concentrations of dye, 2.2 mumol of dye were bound per mg emulsan.     

Protein engineering of wzc to generate new emulsan analogs

Acinetobacter venetianus Rag1 produces an extracellular, polymeric lipoheteropolysaccharide termed apoemulsan. This polymer is putatively produced via a Wzy-dependent pathway. According to this model, the length of the polymer is regulated by polysaccharide-copolymerase (PCP) protein. A highly conserved proline and glycine motif was identified in all members of the PCP family of proteins and is involved in regulation of polymer chain length. In order to control the structure of apoemulsan, defined point mutations in the proline-glycine-rich region of the apoemulsan PCP protein (Wzc) were introduced. Modified wzc variants were introduced into the Rag1 genome via homologous recombination. Stable chromosomal mutants were confirmed by Southern blot analysis. The molecular weight of the polymer was analyzed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. Five of the eight point mutants produced polymers having molecular weights higher than the molecular weight of the polymer produced by the wild type. Moreover, four of these five polymers had modified biological properties. Replacement of arginine by leucine (R418L) resulted in the most significant change in the molecular weight of the polymer. The R418L mutant was the most hydrophilic mutant, exhibiting decreased adherence to polystyrene, and inhibited biofilm formation. The results described in this report show the functional effect of Wzc modification on the molecular weight of a high-molecular-weight polysaccharide. Moreover, in the present study we developed a genetic system to control polymerization of apoemulsan. The use of selective exogenous fatty acid feeding strategies, as well as genetic manipulation of sugar backbone chain length, is a promising new approach for bioengineering emulsan analogs.     

Hydrocarbon degradation by Acinetobacter calcoaceticus RAG-1 using the self-cycling fermentation technique

The use of self-cycling fermentations (SCFs) as a method for dealing with insoluble carbon substrates was examined. The emulsan-producing Acinetobacter calcoaceticus RAG-1 was used as the test organism. Limiting concentrations of hexadecane, 1-hexadecene, or 1-chlorohexadecane were used as the carbon substrate. The parameters monitored were residual hydrocarbon concentration, cycle time (doubling time), biomass concentration and emulsan concentration. Cycle-to-cycle variations of the measured parameters were found to be samll. In all cases, no residual hydrocarbon was detected. The minimum dissolved oxygen concentration was found to correspond with the complete dissappearance of the carbon source. A correlation between minimum dissolved exygen concentration, biomass concentration, and emulsan concentration was noted, thus making it easy to determine when steady-state conditions had been reached with respect to biomass and emulsan concentrations. The specific emulsan and biomass yields were found to increase during early stages of the fermentation, attaining their respective maxima at steady-state. Foaming problems often associated with the complete utilization of the insoluble substrate were eliminated using SCF technology, because harvesting occurs immediately following carbon depletion. From the results, SCFs provide a convenient method by which to produce and harvest emulsan. (c) 1992 John Wiley & Sons, Inc.     

Bio-generated metal binding polysaccharides as catalysts for synthetic applications and organic pollutant transformations

Iron and palladium binding an exopolysaccharide (EPS) were obtained and purified from cultures of bacterial cells of Klebsiella oxytoca BAS-10. The strain BAS-10 was able to grow under anaerobic conditions with Fe(III)-citrate as energy and carbon source, producing Fe(III)-EPS that was extracted and used as catalyst in the oxidation reaction of phenol with H(2)O(2). The same bacterial strain was cultivated anaerobically with Na-citrate and Pd(2)(NO)(3) was added during the exponential growth to afford a Pd-EPS, named Bio-Pd (A), that, after isolation and purification, was used as catalyst in the reductive dehalogenation of chlorobenzene as model reaction. For comparison other two palladium binding polysaccharides were prepared: (a) a second type Pd-EPS, named Bio-Pd (B), was obtained by an exchange reaction with Pd acetate starting from an iron-free EPS produced by strain BAS-10 growing on Na-citrate medium; (b) a third type of palladium, named Bio-Pd (C), bound to a different polysaccharide, was recovered after the same exchange reaction applied on glycolipid emulsan obtained from an aerobic culture of Acinetobacter venetianus RAG 1. The superiority of Bio-Pd (A), as catalyst, vs Bio-Pd (B) and (C) was demonstrated. This approach to use microorganisms to prepare metal bound polysaccharides is novel and permits to prepare metal species, sequestrated in aqueous phase that can be useful either as catalysts for synthetic applications or to support the microbial biotransformation of pollutants.     

Production of exopolysaccharides by Acinetobacter strains in a controlled fed-batch fermentation process using soap stock oil (SSO) as carbon source

The production of two extracellular capsular heteropolysaccharides by two different Acinetobacter strains has been studied in separate controlled fermentation processes with a view to their industrial applications as specific dispersing agents. The first, emulsan, is an extracellular polyanionic amphipathic heteropolysaccharide (MW 10(6) D) made by A. calcoaceticus RAG-1. It forms and stabilizes oil in water emulsions. The other, biodispersan (PS-A2), is another extracellular zwitterionic heteropolysaccharide (MW 51 kD) made by A. calcoaceticus A2. This polysaccharide disperses big solid limestone granules forming micron-size water suspension. Both polysaccharides are synthesized within the cells, exported to their outer surface to form an extracellular cell-associated capsule and released subsequently into the growth medium. The polymers were produced in a computer-controlled fed-batch intensively aerated fermentation process. A commercially available and cheap fatty acids mixture (soap stock oil) served as the carbon source, and was fed in coordination with the required nitrogen. The coordinated feed of carbon and nitrogen was operated on the basis of two metabolic correlations: The first correlation related the cell protein produced and the ammonium nitrogen consumed with the outcoming coeffients of 24 and 21 mM NH3/g protein for the emulsan and the biodispersan fermentations respectively. The second correlation linked the consumption of the fatty acids with that of the nitrogen source dictating the appropriate C/N ratio of the feed into the operating fermentor. These ratios were 7.7 g C/g N for the emulsan fermentation and 8.5 gC/g N in the case of the biodispersan production process.(ABSTRACT TRUNCATED AT 250 WORDS)     

An exocellular protein from the oil-degrading microbe Acinetobacter venetianus RAG-1 enhances the emulsifying activity of the polymeric bioemulsifier emulsan

The oil-degrading microorganism Acinetobacter venetianus RAG-1 produces an extracellular polyanionic, heteropolysaccharide bioemulsifier termed emulsan. Emulsan forms and stabilizes oil-water emulsions with a variety of hydrophobic substrates. Removal of the protein fraction yields a product, apoemulsan, which exhibits much lower emulsifying activity on hydrophobic substrates such as n-hexadecane. One of the key proteins associated with the emulsan complex is a cell surface esterase. The esterase (molecular mass, 34.5 kDa) was cloned and overexpressed in Escherichia coli BL21(DE3) behind the phage T7 promoter with the His tag system. After overexpression, about 80 to 90% of the protein was found in inclusion bodies. The overexpressed esterase was recovered from the inclusion bodies by solubilization with deoxycholate and, after slow dialysis, was purified by metal chelation affinity chromatography. Mixtures containing apoemulsan and either the catalytically active soluble form of the recombinant esterase isolated from cell extracts or the solubilized inactive form of the enzyme recovered from the inclusion bodies formed stable oil-water emulsions with very hydrophobic substrates such as hexadecane under conditions in which emulsan itself was ineffective. Similarly, a series of esterase-defective mutants were generated by site-directed mutagenesis, cloned, and overexpressed in E. coli. Mutant proteins defective in catalytic activity as well as others apparently affected in protein conformation were also active in enhancing the apoemulsan-mediated emulsifying activity. Other proteins, including a His-tagged overexpressed esterase from the related organism Acinetobacter calcoaceticus BD4, showed no enhancement.     

Biosynthesis of PHB tercopolymer by Bacillus cereus UW85

AIMS: The study was attempted to determine the ability of a Gram-positive Bacillus cereus UW85 strain to biosynthesize poly (3-hydroxybutyrate) copolymers when epsilon-caprolactone, or epsilon-caprolactone and glucose, were used as carbon sources. METHODS AND RESULTS: Bacillus cereus was grown for 24 h under nitrogen-limited conditions in a mineral salts medium. Growth was monitored by measurement of turbidity. Glucose level was determined by the colorimetric anthrone METHOD: The epsilon-caprolactone concentration was determined by gas chromatography. The bacterial biopolymers were extracted with chloroform in a Soxhlet extractor and then characterized by nuclear magnetic resonance and gel permeation chromatography. When epsilon-caprolactone was used as a carbon substrate, the bacterial strain produced tercopolymer with 3-hydroxybutyrate, 3-hydroxyvalerate and 6-hydroxyhexanoate units. However, when caprolactone and glucose were supplied together, only homopolymer of poly (3-hydroxybutyrate) was produced. CONCLUSION: All tercopolymers isolated from B. cereus UW85 cells were obtained with yields up to 9% (w/w) and low number-average molecular weight compared with the homopolymer PHB. SIGNIFICANCE AND IMPACT OF THE STUDY: Bacillus cereus UW85 produced tercopolymer with a low molecular weight from one substrate (epsilon-caprolactone) used as a carbon source. The results are significant for the potential future application of Bacillus biopolymers to bioplastics production.     

Acinetobacter sp. HM746599 isolated from leatherback turtle blood

A newly described bacterial isolate, Acinetobacter sp. HM746599, has been obtained from leatherback sea turtle hatchling blood. The implication is that the hatchling was infected during development in the egg, which is substantiated by other studies to be reported by us in the future. The 16S rRNA gene sequence of the bacterium (GenBank accession number: HM746599) showed the greatest similarity to the identified species, Acinetobacter beijerinckii (97.6-99.78%) and Acinetobacter venetianus (99.78%). Acinetobacter sp. HM746599 are gram-negative, rod-shaped coccobacilli and are hemolytic/cytotoxic to human and sea turtle red blood cells (RBCs). Hemolysis is not the result of any detectable soluble toxin. Acinetobacter beijerinckii and A. venetianus hemolyze sheep RBCs while Acinetobacter sp. HM746599 does not, and unlike A. venetianus, the growth of Acinetobacter sp. HM746599 and A. beijerinckii is not supported by l-arginine. Many Acinetobacter species, especially hemolytic ones, are pathogenic to immunologically compromised humans and it is possible that, in addition to sea turtles, this bacterium might also be a danger to susceptible humans who handle infected hatchlings. The bacteria are available from CCUG (Culture Collection, University Gothenburg, G?teborg, Sweden) and from NRRL (Agricultural Research Service Culture Collection, Peoria, IL).     

Purification and properties of the myo-inositol-binding protein from a Pseudomonas sp.

Emulsan, the extracellular polyanionic emulsifying agent produced by Acinetobacter calcoaceticus RAG-1, has been implicated as a receptor for a specific virulent RAG-1 bacteriophage, ap3. Aqueous solutions of emulsan did not interfere with phage ap3 adsorption to RAG-1 cells. However, binding of phage ap3 occurred at the interfaces of hexadecane-in-water emulsions specifically stabilized by emulsan polymers. Binding of ap3 to emulsions was inhibited either in the presence of anti-emulsan antibodies or in the presence of a specific emulsan depolymerase. Moreover, when the phage was first bound to emulsan-stabilized emulsions and the emulsions subsequently treated with emulsan depolymerase, viable phage was released, indicating that phage ap3 DNA ejection was not triggered by binding. The results indicate that emulsan functions as the ap3 receptor and suggest that to function as a receptor, emulsan assumes a specific conformation conferred on it by its specific interaction with hydrophobic surfaces.     

Enzymatic depolymerization of emulsan

Emulsan, the polyanionic emulsifying agent synthesized by Acinetobacter calcoaceticus RAG-1, was depolymerized by an enzyme obtained from a soil bacterium YUV-1. The extracellular emulsan depolymerase was produced when strains RAG-1 and YUV-1 were grown together on agar medium. The enzyme was extracted from the agar and concentrated by ultrafiltration and ammonium sulfate precipitation. The molecular weight of the enzyme was estimated to be 89,000. Emulsan depolymerase activity was due to an eliminase reaction which split glycosidic linkages within the heteropolysaccharide backbone of emulsan to generate reducing groups and alpha, beta-unsaturated uronides with an absorbance maximum of 233 nm. Deesterified emulsan was degraded by emulsan depolymerase at only 27% of the rate of the native polymer. The treatment of emulsan solutions with emulsan depolymerase for brief periods caused a rapid and parallel drop in viscosity and emulsifying activity. More than 75% of the viscosity and emulsifying activity was lost at a time when less than 0.5% of the glycosidic linkages were broken. These data indicate that (i) emulsan depolymerase is an endoglycosidase and (ii) the higher the molecular weight of emulsan, the greater its emulsifying activity. Exhaustive digestion of emulsan with emulsan depolymerase produced oligosaccharides with a number average molecular weight of about 3,000. The fractionation of the digest on Bio-Gel P-6 yielded four broad peaks. The pooled fractions from each of the peaks contained the same relative amounts of reducing sugar and had an absorbance at 233 nm. The molar ratio of esterified sugar to reducing groups was close to 2 in each fraction.     

The potential of restaurant waste lipids as biodiesel feedstocks

Biodiesel is usually produced from food-grade vegetable oils that are more expensive than diesel fuel. Therefore, biodiesel produced from food-grade vegetable oil is currently not economically feasible. Waste cooking oils, restaurant grease and animal fats are potential feedstocks for biodiesel. These inexpensive feedstocks represent one-third of the US total fats and oil production, but are currently devoted mostly to industrial uses and animal feed. The characteristics of feedstock are very important during the initial research and production stage. Free fatty acids and moisture reduce the efficiency of transesterification in converting these feedstocks into biodiesel. Hence, this study was conducted to determine the level of these contaminants in feedstock samples from a rendering plant. Levels of free fatty acids varied from 0.7% to 41.8%, and moisture from 0.01% to 55.38%. These wide ranges indicate that an efficient process for converting waste grease and animal fats must tolerate a wide range of feedstock properties.     

Bioengineered emulsans from Acinetobacter calcoaceticusRAG-1 transposon mutants

Transposon mutants of Acinetobacter calcoaceticus strain RAG-1 were studied in an effort to control fatty acid (FA) substitution patterns of emulsan, a bioemulsifier secreted by the organism. The disrupted genes, involved in the biosynthetic pathways of biotin, histidine, cysteine or purines, influenced the level and types of FAs incorporated into emulsan. The structural variants of emulsan generated by the transposon mutants were characterized for yield, FA content, molecular weight, and emulsification behavior when grown on a series of FAs of different chain lengths from C11 to C18. Yields of emulsan from the transposon mutants were found to be lower than the parent strain and depended on the type of FA used to supplement the growth medium. Mutants 13D (His-) and 52D (Cys-) grown on LB plus C16 or C14, respectively, exhibited enhanced emulsifying activity compared to A. calcoaceticus RAG-1. The presence and composition of long chain FAs on the polysaccharide backbone influenced emulsification behavior: particularly a high mole percentage of C16 (48%) and C18 (42%). The results provide important insight into the bioengineering of bioemulsifier-producing microorganisms and provide a path towards highly tailored novel amphipathic structures to utilize as biodegradable in environmental, biomedical, and personal care applications.     

Exocellular esterase and emulsan release from the cell surface of Acinetobacter calcoaceticus

An esterase activity has been found, both in the cell-free growth medium and on the cell surface of the hydrocarbon-degrading Acinetobacter calcoaceticus RAG-1. The enzyme catalyzed the hydrolysis of acetyl and other acyl groups from triglycerides and aryl and alkyl esters. Emulsan, the extracellular heteropolysaccharide bioemulsifier produced by strain RAG-1, was also a substrate for the enzyme. Gel filtration showed that the cell-free enzyme was released from the cell surface either emulsan free or associated with the bioemulsifier. The partially purified enzyme was found to interact specifically with the esterified fully active emulsan, but not with the deesterified polymer. A role for esterase in emulsan release from the cell surface was indicated when the enzyme was preferentially depleted from the cell surface under conditions in which emulsan was not released. Such cells lost the capacity to release the biopolymer.