New buffers to improve the quantitative real-time polymerase chain reaction

Real-time PCR is a potent technique for nucleic acid quantification for research and diagnostic purposes, the wide dynamic range being one of the advantages over other techniques like the microarray. Several additives and enhancers have been studied to expand the PCR dynamic range in order to be more efficient in quantifying low quantities of nucleic acids, increase the yield and improve reaction efficiency. Shown here is that a combination of new buffers with the regularly used Tris buffer makes it possible to expand the real-time PCR dynamic range and to improve the efficiency and correlation coefficient. Mixing HEPES, TEA or MOPS with Tris was more efficient than Tris alone. It was also found that, if the pH value of the Tris buffer was calibrated with phosphoric acid instead of hydrochloric acid, then the dynamic range was significantly improved and low quantities could be detected and quantified more efficiently. Mixing more than one compound with the Tris buffer was also effective for expanding the dynamic range and increasing the efficiency and correlation coefficient in quantitative real-time PCR.     

The real-time polymerase chain reaction

The scientific, medical, and diagnostic communities have been presented the most powerful tool for quantitative nucleic acids analysis: real-time PCR [Bustin, S.A., 2004. A-Z of Quantitative PCR. IUL Press, San Diego, CA]. This new technique is a refinement of the original Polymerase Chain Reaction (PCR) developed by Kary Mullis and coworkers in the mid 80:ies [Saiki, R.K., et al., 1985. Enzymatic amplification of beta-globin genomic sequences and restriction site analysis for diagnosis of sickle cell anemia, Science 230, 1350], for which Kary Mullis was awarded the 1993 year's Nobel prize in Chemistry. By PCR essentially any nucleic acid sequence present in a complex sample can be amplified in a cyclic process to generate a large number of identical copies that can readily be analyzed. This made it possible, for example, to manipulate DNA for cloning purposes, genetic engineering, and sequencing. But as an analytical technique the original PCR method had some serious limitations. By first amplifying the DNA sequence and then analyzing the product, quantification was exceedingly difficult since the PCR gave rise to essentially the same amount of product independently of the initial amount of DNA template molecules that were present. This limitation was resolved in 1992 by the development of real-time PCR by Higuchi et al. [Higuchi, R., Dollinger, G., Walsh, P.S., Griffith, R., 1992. Simultaneous amplification and detection of specific DNA-sequences. Bio-Technology 10(4), 413-417]. In real-time PCR the amount of product formed is monitored during the course of the reaction by monitoring the fluorescence of dyes or probes introduced into the reaction that is proportional to the amount of product formed, and the number of amplification cycles required to obtain a particular amount of DNA molecules is registered. Assuming a certain amplification efficiency, which typically is close to a doubling of the number of molecules per amplification cycle, it is possible to calculate the number of DNA molecules of the amplified sequence that were initially present in the sample. With the highly efficient detection chemistries, sensitive instrumentation, and optimized assays that are available today the number of DNA molecules of a particular sequence in a complex sample can be determined with unprecedented accuracy and sensitivity sufficient to detect a single molecule. Typical uses of real-time PCR include pathogen detection, gene expression analysis, single nucleotide polymorphism (SNP) analysis, analysis of chromosome aberrations, and most recently also protein detection by real-time immuno PCR.     

Kinetics of baculovirus replication and release using real-time quantitative polymerase chain reaction.

The study of viral-based processes is hampered by (a) their complex, transient nature, (b) the instability of products, and (c) the lack of accurate diagnostic assays. Here, we describe the use of real-time quantitative polymerase chain reaction to characterize baculoviral infection. Baculovirus DNA content doubles every 1.7 h from 6 h post-infection until replication is halted at the onset of budding. No dynamic equilibrium exists between replication and release, and the kinetics are independent of the cell density at the time of infection. No more than 16% of the intracellular virus copies bud from the cell.     

Rapid titer determination of baculovirus by quantitative real-time polymerase chain reaction

Titer determination is a prerequisite for the study of viruses. However, the current available methods are tedious and time-consuming. To improve the efficiency of titer determination, we have developed a rapid and simple method for the routine detection of baculovirus titers using a quantitative real-time PCR. This method is based on the amplification of approximately 150-bp fragments located in the coding regions of selected genes. The PCR was found to be quantitative in a range of 10(3) to 10(9) virus particles per 200 microL of supernatant, and the results were closely correlated with titers detected from 50% tissue culture infectious doses (TCID(50)) of baculovirus. This quantitative real-time PCR requires only 30 min to perform, and the entire titer determination can be accomplished within 1 h without the need for cell seeding or further virus dilution and infection. Because this technology is easy to operate, generates data with high precision, and most importantly is very quick, it will certainly be broadly applied for titer determination of baculoviruses in the future.     

Reference gene selection for quantitative real-time polymerase chain reaction in Populus

Accurate quantification of gene expression with quantitative real-time polymerase chain reaction (qRT–PCR) relies on the choice of an appropriate reference gene. In this study, nine candidate reference genes were selected to study the expression stability for qRT–PCR normalization in adventitious rooting of Populus hardwood cuttings. geNorm, NormFinder, and BestKeeper analysis revealed that actin isoform B (ACT) was the most unstable gene across developmental stages, whereas elongation factor 1 alpha (EF1a) and 18S recombinant RNA (18S) emerged as the most appropriate reference genes for qRT–PCR analysis in this complex developmental process.     

A quantitative real-time polymerase chain reaction assay for the seagrass pathogen Labyrinthula zosterae

The protist Labyrinthula zosterae (Phylum Bigyra, sensu Tsui et al. 2009) has been identified as a causative agent of wasting disease in eelgrass (Zostera marina), of which the most intense outbreak led to the destruction of 90% of eelgrass beds in eastern North America and western Europe in the 1930s. Outbreaks still occur today, albeit at a smaller scale. Traditionally, L. zosterae has been quantified by measuring the necrotic area of Z. marina leaf tissue. This indirect method can however only lead to a very rough estimate of pathogen load. Here, we present a quantitative real-time polymerase chain reaction (qPCR) approach to directly detect and quantify L. zosterae in eelgrass tissue. Based on the internal transcribed spacer (ITS) sequences of rRNA genes, species-specific primers were designed. Using our qPCR, we were able to quantify accurately and specifically L. zosterae load both from culture and eelgrass leaves using material from Europe and North America. Our detection limit was less than one L. zosterae cell. Our results demonstrate the potential of this qPCR assay to provide rapid, accurate and sensitive molecular identification and quantification of L. zosterae. In view of declining seagrass populations worldwide, this method will provide a valuable tool for seagrass ecologists and conservation projects.     

Real-time quantitative polymerase chain reaction

In Charcot-Marie-Tooth type 1A disease (CMTIA), heterozygosity for the peripheral myelin protein 22 (PMP22) duplication increases the gene dose from two to three, whereas, in hereditary neuropathy with liability to pressure palsies (HNPP), heterozygosity for the PMP22 deletion reduces the gene dose from two to one. Thirty-eight Norwegian patients with CMT1, 4 patients with HNPP, 15 asymptomatic family members, and 45 normal controls were studied using the ABI 7700 sequence detection system and the TaqMan method of real-time quantitative polymerase chain reaction (PCR). Using a comparative threshold cycle (Ct) method and albumin as reference gene, the gene copy number by PMP22 gene duplication or deletion on chromosome 17p11.2-12 was quantified. The PMP22 duplication ratio ranged from 1.50 to 2.21, the PMP22 deletion ratio ranged from 0.44 to 0.55, and the PMP22 ratio in normals ranged from 0.82 to 1.27. All samples were run in triplicate, with a mean standard deviation of 0.07 (range 0.01-0.17). Thirty-four of thirty-eight CMT1 patients (89.6%) had the PMP22 duplication and the four HNPP patients had the PMP22 deletion. This was not found in any of the asymptomatic family members or the controls. Real-time quantitative PCR is a sensitive, specific, and reproducible method for diagnosing PMP22 duplication and deletion. The method is fast, allowing 13 patients to be diagnosed in 2 h. It involves no radioisotopes and requires no post-PCR handling. In our opinion, real-time quantitative PCR is the first method of choice in diagnosing PMP22 duplication and deletion.     

Detecting and resolving position-dependent temperature effects in real-time quantitative polymerase chain reaction

Real-time quantitative polymerase chain reaction (qPCR) depends on precise temperature control of the sample during cycling. In the current study, we investigated how temperature variation in plate-based qPCR instruments influences qPCR results. Temperature variation was measured by amplicon melting analysis as a convenient means to assess well-to-well differences. Multiple technical replicates of several SYBR Green I-based qPCR assays allowed correlation of relative well temperature to quantification cycle. We found that inadequate template denaturation results in an inverse correlation and requires increasing the denaturation temperature, adding a DNA destabilizing agent, or pretreating with a restriction enzyme. In contrast, inadequate primer annealing results in a direct correlation and requires lowering the annealing temperature. Significant correlations were found in 18 of 25 assays. The critical nature of temperature-dependent effects was shown in a blinded study of 29 patients for the diagnosis of Prader–Willy and Angelman syndromes, where eight diagnoses were incorrect unless temperature-dependent effects were controlled. A method to detect temperature-dependent effects by pairwise comparisons of replicates in routine experiments is presented and applied. Systematic temperature errors in qPCR instruments can be recognized and their effects eliminated when high precision is required in quantitative genetic diagnostics and critical complementary DNA analyses.     

Detection of infectious dengue virus by selective real-time quantitative polymerase chain reaction

Dear Editor,The dengue virus(DENV)is a single-stranded positivesense RNA virus that belongs to the family Flaviviridae(Gubler,2002),and has four serotypes,DENV1–DENV4,which are transmitted via Aedes aegypti and Aedes albopictus(Rodriguez-Roche and Gould,2013).It has been reported that more than 50 million dengue infections occur each year(Guzman et al.,2010),and a serious outbreak occurred in the Southern Provinces of     

Improved biplex quantitative real-time polymerase chain reaction with modified primers for gene expression analysis

Stabilizing modified bases incorporated in primers allows the reduction of housekeeping gene primer concentration not possible with regular primers without sacrificing amplification efficiency. Low primer concentration allows coamplification of the most abundant housekeeping genes with very rare templates without mutual inhibition. Real-time polymerase chain reaction (PCR) coamplification of 18S ribosomal RNA with several genes of interest was used in this study with MGB Eclipse (Nanogen, San Diego, CA) hybridization probes. The results may be useful for high throughput gene expression studies as they simplify validation experiments.     

PrimRglo: a multiplexable quantitative real-time polymerase chain reaction system for nucleic acid detection

We report the development of a new real-time polymerase chain reaction (PCR) detection system that uses oligonucleotide "tagged" PCR primers, a fluorophore-labeled "universal" detection oligonucleotides, and a complementary quenching oligonucleotide. The fluorescence signal decreases as PCR product accumulates due to the increase in detection/quencher hybrid formation as the tagged primer is consumed. We use plasmids containing the influenza A matrix gene and the porA and ctrA genes of Neisseria meningitidis as targets for developing the system. Cycle threshold (Ct) values were generated, and the sensitivity of the new system (dubbed "PrimRglo") compared favorably with the commonly used SYBR green and Taqman detection systems and, unlike the latter system, does not require the design of a new dual-labeled detection oligonucleotide for each new target sequence.     

Selection of reference genes for quantitative real-time polymerase chain reaction studies in rat osteoblasts

Quantitative real-time polymerase chain reaction (qRT-PCR) is a powerful tool to evaluate gene expression, but its accuracy depends on the choice and stability of the reference genes used for normalization. In this study, we aimed to identify reference genes for studies on osteoblasts derived from rat bone marrow mesenchymal stem cells (bone marrow osteoblasts), osteoblasts derived from newborn rat calvarial (calvarial osteoblasts), and rat osteosarcoma cell line UMR-106. The osteoblast phenotype was characterized by ALP activity and extracellular matrix mineralization. Thirty-one candidates for reference genes from a Taqman^® array were assessed by qRT-PCR, and their expressions were analyzed by five different approaches. The data showed that several of the most traditional reference genes, such as Actb and Gapdh, were inadequate for normalization and that the experimental conditions may affect gene stability. Eif2b1 was frequently identified among the best reference genes in bone marrow osteoblasts, calvarial osteoblasts, and UMR-106 osteoblasts. Selected stable and unstable reference genes were used to normalize the gene expression of Runx2, Alp, and Oc. The data showed statistically significant differences in the expression of these genes depending on the stability of the reference gene used for normalization, creating a bias that may induce incorrect assumptions in terms of osteoblast characterization of these cells. In conclusion, our study indicates that a rigorous selection of reference genes is a key step in qRT-PCR studies in osteoblasts to generate precise and reliable data.     

Robust regression methods for real-time polymerase chain reaction

Current real-time polymerase chain reaction (PCR) data analysis methods implement linear least squares regression methods for primer efficiency estimation based on standard curve dilution series. This method is sensitive to outliers that distort the outcome and are often ignored or removed by the end user. Here, robust regression methods are shown to provide a reliable alternative because they are less affected by outliers and often result in more precise primer efficiency estimators than the linear least squares method.     

Monitoring of Leuconostoc population during sauerkraut fermentation by quantitative real-time polymerase chain reaction

A real-time PCR assay method was established to monitor Leuconostoc spp. populations via specific amplification of the dextransucrase gene. Quantification of L. mesenteroides B-512F using both genomic DNA and cell suspensions yielded a log-linear correlation spanning approximately 5 log units. By using this method, monitoring changes of Leuconostoc spp. during sauerkraut fermentation was successfully accomplished with accuracy after inoculation of starter and sugars (sucrose and maltose).     

Measurement of Pseudomonas aeruginosa multidrug efflux pumps by quantitative real-time polymerase chain reaction

Multidrug efflux pumps contribute to multiple antibiotic resistance in Pseudomonas aeruginosa. Pump expression usually has been quantified by Western blotting. Quantitative real-time polymerase chain reaction has been developed to measure mRNA expression for genes of interest. Whether this method correlates with pump protein quantities is unclear. We devised a real-time PCR for mRNA expression of MexAB-OprM and MexXY-OprM multidrug efflux pumps. In laboratory strains differing in MexB and MexY expression and in several clinical isolates, protein and mRNA expression correlated well. Quantitative real-time PCR should be a useful alternative in quantitating expression of multidrug efflux pumps by P. aeruginosa isolates in clinical laboratories.