An entropy-based measure of founder informativeness

Optimizing quantitative trait locus (QTL) mapping experiments requires a generalized measure of marker informativeness because variable information is obtained from different marker systems, marker distribution and pedigree types. Such a measure can be derived from the concept of Shannon entropy, a central concept in information theory. Here we introduce entropy-based founder informativeness (EFI), a new measure of information content generalized across pedigrees, maps, marker systems and mating configurations. We derived equations for inbred- and outbred-derived mapping populations. Mathematical properties of EFI include enhanced sensitivity to mapping population type and extension to any number of founders. To illustrate the use of EFI, we compared experimental designs for QTL mapping for three examples: (i) different marker systems for an F2 pedigree, (ii) different marker densities and sampling sizes for a BC1 pedigree and (iii) a comparison of haplotypic versus zygotic analyses of an outbred pedigree. As an a priori generalized measure of information content, EFI does not require phenotypic data for optimizing experimental designs for QTL mapping.     

High-resolution joint linkage disequilibrium and linkage mapping of quantitative trait loci based on sibship data

This paper proposes variance component models for high resolution joint linkage disequilibrium (LD) and linkage mapping of quantitative trait loci (QTL) based on sibship data; this can include population data if independent individuals are treated as single sibships. One application of these models is late onset complex disease gene mapping, when parental data are not available. The models simultaneously incorporate both LD and linkage information. The LD information is contained in mean coefficients of sibship data. The linkage information is contained in the variance-covariance matrices of trait values for sibships with at least two siblings. We derive formulas for calculating the probability of sharing two trait alleles identical by descent (IBD) for sibpairs in interval mapping of QTL; this is the coefficient of dominant variance of the trait covariance of sibpairs on major QTL. To investigate the performance of the formulas, we calculate the numerical values via the formulas and get satisfactory approximations. We compare the power and sample sizes for both LD and linkage mapping. By simulation and theoretical analysis, we compare the results with those of Fulker and Abecasis "AbAw" approach. It is well known that the resolution of linkage analysis can be low for complex disease gene mapping. LD mapping, on the other hand, can increase mapping precision and is useful in high resolution mapping. Linkage analysis is less sensitive to population subdivisions and admixtures. The level of LD is sensitive to population stratification which may easily lead to spurious association. Performing a joint analysis of LD and linkage mapping can help to overcome the limits of both approaches. Moreover, the advantages of the two complementary strategies can be utilized maximally. In practice, linkage analysis may be performed using pedigree data to identify suggestive linkage between markers and trait loci based on a sparse marker map. In the presence of linkage, joint LD and linkage mapping can be carried out to do fine gene mapping based on a dense genetic map using both pedigree and population data. Population and pedigree data of any type can be combined to perform a joint analysis of high resolution LD and linkage mapping of QTL by generalizing the method.     

The genetic variance for multiple linked quantitative trait loci conditional on marker information in a crossed population

In the prediction of genetic values and quantitative trait loci (QTLs) mapping via the mixed model method incorporating marker information in animal populations, it is important to model the genetic variance for individuals with an arbitrary pedigree structure. In this study, for a crossed population originated from different genetic groups such as breeds or outbred strains, the variance of additive genetic values for multiple linked QTLs that are contained in a chromosome segment, especially the segregation variance, is investigated assuming the use of marker data. The variance for a finite number of QTLs in one chromosomal segment is first examined for the crossed population with the general pedigree. Then, applying the concept of the expectation of identity-by-descent proportion, an approximation to the mean of the conditional probabilities for the linked QTLs over all loci is obtained, and using it an expression for the variance in the case of an infinite number of linked QTLs marked by flanking markers is derived. It appears that the approach presented can be useful in the segment mapping using, and in the genetic evaluation of, crosses with general pedigrees in the population of concern. The calculation of the segregation variance through the current approach is illustrated numerically, using a small data-set.     

Multiple QTL mapping in related plant populations via a pedigree-analysis approach

QTL mapping experiments in plant breeding may involve multiple populations or pedigrees that are related through their ancestors. These known relationships have often been ignored for the sake of statistical analysis, despite their potential increase in power of mapping. We describe here a Bayesian method for QTL mapping in complex plant populations and reported the results from its application to a (previously analysed) potato data set. This Bayesian method was originally developed for human genetics data, and we have proved that it is useful for complex plant populations as well, based on a sensitivity analysis that was performed here. The method accommodates robustness to complex structures in pedigree data, full flexibility in the estimation of the number of QTL across multiple chromosomes, thereby accounting for uncertainties in the transmission of QTL and marker alleles due to incomplete marker information, and the simultaneous inclusion of non-genetic factors affecting the quantitative trait.     

Prediction of identity by descent probabilities from marker-haplotypes

The prediction of identity by descent (IBD) probabilities is essential for all methods that map quantitative trait loci (QTL). The IBD probabilities may be predicted from marker genotypes and/or pedigree information. Here, a method is presented that predicts IBD probabilities at a given chromosomal location given data on a haplotype of markers spanning that position. The method is based on a simplification of the coalescence process, and assumes that the number of generations since the base population and effective population size is known, although effective size may be estimated from the data. The probability that two gametes are IBD at a particular locus increases as the number of markers surrounding the locus with identical alleles increases. This effect is more pronounced when effective population size is high. Hence as effective population size increases, the IBD probabilities become more sensitive to the marker data which should favour finer scale mapping of the QTL. The IBD probability prediction method was developed for the situation where the pedigree of the animals was unknown (i.e. all information came from the marker genotypes), and the situation where, say T, generations of unknown pedigree are followed by some generations where pedigree and marker genotypes are known.     

Admixture Mapping of Quantitative Trait Loci for BMI in African Americans: Evidence for Loci on Chromosomes 3q, 5q,and 15q

Obesity is a heritable trait and a major risk factor for highly prevalent common diseases such as hypertension and type 2 diabetes. Previously we showed that BMI was positively correlated with African ancestry among the African Americans (AAs) in the US National Heart, Lung, and Blood Institute's Family Blood Pressure Program (FBPP). In a set of 1,344 unrelated AAs, using Individual Ancestry (IA) estimates at 284 marker locations across the genome, we now present a quantitative admixture mapping analysis of BMI. We used a set of unrelated individuals from Nigeria to represent the African ancestral population and the European American (EA) in the FBPP as the European ancestral population. The analysis was based on a common set of 284 microsatellite markers genotyped in all three groups. We considered the quantitative trait, BMI, as the response variable in a regression analysis with the marker location specific excess European ancestry as the explanatory variable. After suitably adjusting for different covariates such as sex, age, and network, we found strong evidence for a positive association with European ancestry at chromosome locations 3q29 and 5q14 and a negative association on chromosome 15q26. To our knowledge, this is the largest quantitative admixture mapping effort in terms of sample size and marker locus involvement for the trait. These results suggest that these regions may harbor genes influencing BMI in the AA population.     

Combining the meiosis Gibbs sampler with the random walk approach for linkage and association studies with a general complex pedigree and multimarker loci

A linkage analysis for finding inheritance states and haplotype configurations is an essential process for linkage and association mapping. The linkage analysis is routinely based upon observed pedigree information and marker genotypes for individuals in the pedigree. It is not feasible for exact methods to use all such information for a large complex pedigree especially when there are many missing genotypic data. Proposed Markov chain Monte Carlo approaches such as a single-site Gibbs sampler or the meiosis Gibbs sampler are able to handle a complex pedigree with sparse genotypic data; however, they often have reducibility problems, causing biased estimates. We present a combined method, applying the random walk approach to the reducible sites in the meiosis sampler. Therefore, one can efficiently obtain reliable estimates such as identity-by-descent coefficients between individuals based on inheritance states or haplotype configurations, and a wider range of data can be used for mapping of quantitative trait loci within a reasonable time.     

Methods for linkage disequilibrium mapping in crops

Linkage disequilibrium (LD) mapping in plants detects and locates quantitative trait loci (QTL) by the strength of the correlation between a trait and a marker. It offers greater precision in QTL location than family-based linkage analysis and should therefore lead to more efficient marker-assisted selection, facilitate gene discovery and help to meet the challenge of connecting sequence diversity with heritable phenotypic differences. Unlike family-based linkage analysis, LD mapping does not require family or pedigree information and can be applied to a range of experimental and non-experimental populations. However, care must be taken during analysis to control for the increased rate of false positive results arising from population structure and variety interrelationships. In this review, we discuss how suitable the recently developed alternative methods of LD mapping are for crops.     

Development of a STS marker linked to a major locus controlling flour colour in wheat (Triticum aestivum L.)

Flour colour is an important quality trait in the production of bread, noodles and other related end products. Current screening for flour colour in breeding programs requires several grams of flour to be milled. In order to screen large numbers of plants, a rapid PCR-based assay is required. We report here the conversion of a codominant AFLP marker linked to a major locus controlling flour colour in hexaploid wheat, to a sequence tagged site (STS) marker for use in marker-assisted selection (MAS). The two-allelic AFLP bands were cloned and sequenced to allow specific primers to be designed. The primers amplified bands of the expected size in the parental varieties and co-segregated with the original AFLP marker in the mapping population. The primers also amplified alleles of the expected size from the DNA of parental lines of two other related mapping populations. Cultivars that contributed to the pedigree of the original parent `Schomburgk' used to generate the mapping population were also screened to determine the origin of the `yellow' allele.     

Quantitative trait loci for hip dysplasia in a crossbreed canine pedigree

Canine hip dysplasia is a common developmental inherited trait characterized by hip laxity, subluxation or incongruity of the femoral head and acetabulum in affected hips. The inheritance pattern is complex and the mutations contributing to trait expression are unknown. In the study reported here, 240 microsatellite markers distributed in 38 autosomes and the X chromosome were genotyped on 152 dogs from three generations of a crossbred pedigree based on trait-free Greyhound and dysplastic Labrador Retriever founders. Interval mapping was undertaken to map the QTL underlying the quantitative dysplastic traits of maximum passive hip laxity (the distraction index), the dorsolateral subluxation score, and the Norberg angle. Permutation testing was used to derive the chromosome-wide level of significance at p < 0.05 for each QTL. Chromosomes 4, 9, 10, 11 (p < 0.01), 16, 20, 22, 25, 29 (p < 0.01), 30, 35, and 37 harbor putative QTL for one or more traits. Successful detection of QTL was due to the crossbreed pedigree, multiple-trait measurements, control of environmental background, and marked advancement in canine mapping tools.     

Selecting pedigrees for linkage analysis of a quantitative trait: the expected number of informative meioses.

With evidence of segregation at a major locus for a quantitative trait having been found, a logical next step is to select a subset of the pedigrees to include in a linkage study to map the major locus. Ideally this subset should include much of the linkage information in the sample but include only a fraction of the pedigrees. We previously described a strategy for selecting pedigrees for linkage analysis of a quantitative trait on the basis of a pedigree likelihood-ratio statistic. For quantitative traits controlled by a major locus with a rare dominant allele, the likelihood-ratio strategy extracted nearly all the information for linkage while typically requiring marker data on only about one-third of the pedigrees. Here, we describe a new strategy to select pedigrees for linkage analysis on the basis of the expected number of potentially informative meioses in each pedigree. We demonstrate that this informative-meioses strategy provides an efficient and more general means to select pedigrees for a linkage study of a quantitative trait.     

The role of pedigree information in combined linkage disequilibrium and linkage mapping of quantitative trait loci in a general complex pedigree

Combined linkage disequilibrium and linkage (LDL) mapping can exploit historical as well as recent and observed recombinations in a recorded pedigree. We investigated the role of pedigree information in LDL mapping and the performance of LDL mapping in general complex pedigrees. We compared using complete and incomplete genotypic data, spanning 5 or 10 generations of known pedigree, and we used bi- or multiallelic markers that were positioned at 1- or 5-cM intervals. Analyses carried out with or without pedigree information were compared. Results were compared with linkage mapping in some of the data sets. Linkage mapping or LDL mapping with sparse marker spacing ( approximately 5 cM) gave a poorer mapping resolution without considering pedigree information compared to that with considering pedigree information. The difference was bigger in a pedigree of more generations. However, LDL mapping with closely linked markers ( approximately 1 cM) gave a much higher mapping resolution regardless of using pedigree information. This study shows that when marker spacing is dense and there is considerable linkage disequilibrium generated from historical recombinations between flanking markers and QTL, the loss of power due to ignoring pedigree information is negligible and mapping resolution is very high.     

Quantitative trait Loci association mapping by imputation of strain origins in multifounder crosses

Although mapping quantitative traits in inbred strains is simpler than mapping the analogous traits in humans, classical inbred crosses suffer from reduced genetic diversity compared to experimental designs involving outbred animal populations. Multiple crosses, for example the Complex Trait Consortium's eight-way cross, circumvent these difficulties. However, complex mating schemes and systematic inbreeding raise substantial computational difficulties. Here we present a method for locally imputing the strain origins of each genotyped animal along its genome. Imputed origins then serve as mean effects in a multivariate Gaussian model for testing association between trait levels and local genomic variation. Imputation is a combinatorial process that assigns the maternal and paternal strain origin of each animal on the basis of observed genotypes and prior pedigree information. Without smoothing, imputation is likely to be ill-defined or jump erratically from one strain to another as an animal's genome is traversed. In practice, one expects to see long stretches where strain origins are invariant. Smoothing can be achieved by penalizing strain changes from one marker to the next. A dynamic programming algorithm then solves the strain imputation process in one quick pass through the genome of an animal. Imputation accuracy exceeds 99% in practical examples and leads to high-resolution mapping in simulated and real data. The previous fastest quantitative trait loci (QTL) mapping software for dense genome scans reduced compute times to hours. Our implementation further reduces compute times from hours to minutes with no loss in statistical power. Indeed, power is enhanced for full pedigree data.     

A method for computing identity by descent probabilities and quantitative trait loci mapping with dominant (AFLP) markers

Amplified fragment length polymorphisms (AFLPs) are a widely used marker system: the technique is very cost-effective, easy and rapid, and reproducibly generates hundreds of markers. Unfortunately, AFLP alleles are typically scored as the presence or absence of a band and, thus, heterozygous and dominant homozygous genotypes cannot be distinguished. This results in a significant loss of information, especially as regards mapping of quantitative trait loci (QTLs). We present a Monte Carlo Markov Chain method that allows us to compute the identity by descent probabilities (IBD) in a general pedigree whose individuals have been typed for dominant markers. The method allows us to include the information provided by the fluorescent band intensities of the markers, the rationale being that homozygous individuals have on average higher band intensities than heterozygous individuals, as well as information from linked markers in each individual and its relatives. Once IBD probabilities are obtained, they can be combined into the QTL mapping strategy of choice. We illustrate the method with two simulated populations: an outbred population consisting of full sib families, and an F2 cross between inbred lines. Two marker spacings were considered, 5 or 20 cM, in the outbred population. There was almost no difference, for the practical purpose of QTL estimation, between AFLPs and biallelic codominant markers when the band density is taken into account, especially at the 5 cM spacing. The performance of AFLPs every 5 cM was also comparable to that of highly polymorphic markers (microsatellites) spaced every 20 cM. In economic terms, QTL mapping with a dense map of AFLPs is clearly better than microsatellite QTL mapping and little is lost in terms of accuracy of position. Nevertheless, at low marker densities, AFLPs or other biallelic markers result in very inaccurate estimates of QTL position.     

A Random Model Approach to Interval Mapping of Quantitative Trait Loci

Mapping quantitative trait loci in outbred populations is important because many populations of organisms are noninbred. Unfortunately, information about the genetic architecture of the trait may not be available in outbred populations. Thus, the allelic effects of genes can not be estimated with ease. In addition, under linkage equilibrium, marker genotypes provide no information about the genotype of a QTL (our terminology for a single quantitative trait locus is QTL while multiple loci are referred to as QTLs). To circumvent this problem, an interval mapping procedure based on a random model approach is described. Under a random model, instead of estimating the effects, segregating variances of QTLs are estimated by a maximum likelihood method. Estimation of the variance component of a QTL depends on the proportion of genes identical-by-descent (IBD) shared by relatives at the locus, which is predicted by the IBD of two markers flanking the QTL. The marker IBD shared by two relatives are inferred from the observed marker genotypes. The procedure offers an advantage over the regression interval mapping in terms of high power and small estimation errors and provides flexibility for large sibships, irregular pedigree relationships and incorporation of common environmental and fixed effects.     

Development of a simple functional marker for fragrance in rice and its validation in Indian Basmati and non-Basmati fragrant rice varieties

Fragrance development in rice has been reported due to a 8-bp deletion in the exon 7 of badh2 gene located on Chromosome 8S. Multiplex markers targeting the functional InDel polymorphism was earlier reported for genotyping fragrance trait, but the marker was observed to be inconsistent and difficult to use. We have developed a simple, co-dominant, functional marker for fragrance trait, which can be resolved in an agarose gel and validated in Basmati and non-Basmati aromatic rice varieties and in a mapping population segregated for fragrance trait. The marker targets the InDel polymorphism in badh2 gene and amplifies 95 and 103 bp fragments in fragrant and non-fragrant genotypes, respectively. The newly developed marker was highly efficient in discriminating all fragrant and non-fragrant genotypes and showed perfect co-segregation with the trait of fragrance in the mapping population. We recommend the use of this simple, low-cost marker in routine genotyping for fragrance trait in large scale breeding materials and germplasm.     

Quantitative trait locus mapping with background control in genetic populations of clonal F1 and double cross

In this study, we considered five categories of molecular markers in clonal F₁ and double cross populations, based on the number of distinguishable alleles and the number of distinguishable genotypes at the marker locus. Using the completed linkage maps, incomplete and missing markers were imputed as fully informative markers in order to simplify the linkage mapping approaches of quantitative trait genes. Under the condition of fully informative markers, we demonstrated that dominance effect between the female and male parents in clonal F₁ and double cross populations can cause the interactions between markers. We then developed an inclusive linear model that includes marker variables and marker interactions so as to completely control additive effects of the female and male parents, as well as the dominance effect between the female and male parents. The linear model was finally used for background control in inclusive composite interval mapping (ICIM) of quantitative trait locus (QTL). The efficiency of ICIM was demonstrated by extensive simulations and by comparisons with simple interval mapping, multiple‐QTL models and composite interval mapping. Finally, ICIM was applied in one actual double cross population to identify QTL on days to silking in maize.     

Linkage disequilibrium analysis of biallelic DNA markers, human quantitative trait loci, and threshold-defined case and control subjects

Linkage disequilibrium (LD) mapping has been applied to many simple, monogenic, overtly Mendelian human traits, with great success. However, extensions and applications of LD mapping approaches to more complex human quantitative traits have not been straightforward. In this article, we consider the analysis of biallelic DNA marker loci and human quantitative trait loci in settings that involve sampling individuals from opposite ends of the trait distribution. The purpose of this sampling strategy is to enrich samples for individuals likely to possess (and not possess) trait-influencing alleles. Simple statistical models for detecting LD between a trait-influencing allele and neighboring marker alleles are derived that make use of this sampling scheme. The power of the proposed method is investigated analytically for some hypothetical gene-effect scenarios. Our studies indicate that LD mapping of loci influencing human quantitative trait variation should be possible in certain settings. Finally, we consider possible extensions of the proposed methods, as well as areas for further consideration and improvement.     

Linkage disequilibrium mapping of quantitative trait loci under truncation selection

As a dense map of single nucleotide polymorphism (SNP) markers are available, population-based linkage disequilibrium (LD) mapping or association study is becoming one of the major tools for identifying quantitative trait loci (QTL) and for fine gene mapping. However, in many cases, LD between the marker and trait locus is not very strong. Approaches that maximize the potential of detecting LD will be essential for the success of LD mapping of QTL. In this paper, we propose two strategies for increasing the probability of detecting LD: (1) phenotypic selection and (2) haplotype LD mapping. To provide the foundations for LD mapping of QTL under selection, we develop analytic tools for assessing the impact of phenotypic selection on allele and haplotype frequencies, and LD under three trait models: single trait locus, two unlinked trait loci, and two linked trait loci with or without epistasis. In addition to a traditional chi(2) test, which compares the difference in allele or haplotype frequencies in the selected sample and population sample, we present multiple regression methods for LD mapping of QTL, and investigate which methods are effective in employing phenotypic selection for QTL mapping. We also develop a statistical framework for investigating and comparing the power of the single marker and multilocus haplotype test for LD mapping of QTL. Finally, the proposed methods are applied to mapping QTL influencing variation in systolic blood pressure in an isolated Chinese population.