Impact of hapten presentation on antibody binding at lipid membrane interfaces

We report the effects of ligand presentation on the binding of aqueous proteins to solid supported lipid bilayers. Specifically, we show that the equilibrium dissociation constant can be strongly affected by ligand lipophilicity and linker length/structure. The apparent equilibrium dissociation constants (K_D) were compared for two model systems, biotin/anti-biotin and 2,4-dinitrophenyl (DNP)/anti-DNP, in bulk solution and at model membrane surfaces. The binding constants in solution were obtained from fluorescence anisotropy measurements. The surface binding constants were determined by microfluidic techniques in conjunction with total internal reflection fluorescence microscopy. The results showed that the bulk solution equilibrium dissociation constants for anti-biotin and anti-DNP were almost identical, K_D(bulk) = 1.7 ± 0.2 nM vs. 2.9 ± 0.1 nM. By contrast, the dissociation constant for anti-biotin antibody was three orders of magnitude tighter than for anti-DNP at a lipid membrane interface, K_D = 3.6 ± 1.1 nM vs. 2.0 ± 0.2 μM. We postulate that the pronounced difference in surface binding constants for these two similar antibodies is due to differences in the ligands’ relative lipophilicity, i.e., the more hydrophobic DNP molecules had a stronger interaction with the lipid bilayers, rendering them less available to incoming anti-DNP antibodies compared with the biotin/anti-biotin system. However, when membrane-bound biotin ligands were well screened by a poly(ethylene glycol) (PEG) polymer brush, the K_D value for the anti-biotin antibody could also be weakened by three orders of magnitude, 2.4 ± 1.1 μM. On the other hand, the dissociation constant for anti-DNP antibodies at a lipid interface could be significantly enhanced when DNP haptens were tethered to the end of very long hydrophilic PEG lipopolymers (K_D = 21 ± 10 nM) rather than presented on short lipid-conjugated tethers. These results demonstrate that ligand presentation strongly influences protein interactions with membrane-bound ligands.     

Induction of suppressor T cells and tolerant B cells in vitro by DNP-IgG

Intravenous injection at proper time of irradiated reticulum cell sarcoma cells into SJL mice immunized with dinitrophenylated (DNP) keyhole limpet hemocyanin inhibits the production of anti-DNP IgG₁ and IgG₂ antibodies.     

Methods for the topographical patterning and patterned surface modification of hydrogels based on hydroxyethyl methacrylate

Hydrogels have gained broad acceptance as a class of biocompatible materials. In this paper, we report the topographic patterning and regiospecific functionalization of hydrogel surfaces. Both photolithography and soft lithography are combined in a hybrid process to form these topographic features. By functionalization of a base layer surface followed by lithographic patterning steps, it is possible to introduce chemical functions to specific regions of the patterned surface. The model systems investigated were based on 2-hydroxyethyl methacrylate (HEMA), which is well-known for its low toxicity and widespread use in biomedical applications. Tests of Ni-NTA modified hydrogel surfaces showed successful binding of fluorescently labeled proteins to selected regions of the patterned hydrogel surface. These processes can be expanded to a wide range of monomer systems.     

Dinitrophenyl ligand substrates and their application to immunosensors

We present an approach for the development of highly specific and sensitive antibody based biosensors by chemically tailoring the sensor surface with materials that control specific and nonspecific binding of biologically relevant molecules. As a model system we employed surface immobilized 2,4-dinitrophenyl (DNP)-ligands that bind specifically to anti-DNP antibodies. Self-assembling characteristics and minimization of the nonspecific interactions were used in the ligand design. The redox activity of the DNP-head group was used to calculate the surface density (coverage) of these assemblies using cyclic voltammetry. Quartz crystal microbalance (QCM) and impedance analysis were used to assess the ligand-antibody interaction and estimate the quantity of antibodies bound to the surface. The ligand surface density and the QCM data were useful in determining the sensitivity of our model system. A simple two-step kinetic model was shown to fit the experimental data.     

Patterned biofunctional poly(acrylic acid) brushes on silicon surfaces

Protein patterning was carried out using a simple procedure based on photolithography wherein the protein was not subjected to UV irradiation and high temperatures or contacted with denaturing solvents or strongly acidic or basic solutions. Self-assembled monolayers of poly(ethylene glycol) (PEG) on silicon surfaces were exposed to oxygen plasma through a patterned photoresist. The etched regions were back-filled with an initiator for surface-initiated atom transfer radical polymerization (ATRP). ATRP of sodium acrylate was readily achieved at room temperature in an aqueous medium. Protonation of the polymer resulted in patterned poly(acrylic acid) (PAA) brushes. A variety of biomolecules containing amino groups could be covalently tethered to the dense carboxyl groups of the brush, under relatively mild conditions. The PEG regions surrounding the PAA brush greatly reduced nonspecific adsorption. Avidin was covalently attached to PAA brushes, and biotin-tagged proteins could be immobilized through avidin-biotin interaction. Such an immobilization method, which is based on specific interactions, is expected to better retain protein functionality than direct covalent binding. Using biotin-tagged bovine serum albumin (BSA) as a model, a simple strategy was developed for immobilization of small biological molecules using BSA as linkages, while BSA can simultaneously block nonspecific interactions.     

Tin Oxide as a Protective Heterojunction with Silicon for Efficient Photoelectrochemical Water Oxidation in Strongly Acidic or Alkaline Electrolytes

Photoelectrodes without a p–n junction are often limited in efficiency by charge recombination at semiconductor surfaces and slow charge transfer to electrocatalysts. This study reports that tin oxide (SnO_x) layers applied to n‐Si wafers after forming a thin chemically oxidized SiO_x layer can passivate the Si surface while producing ≈620 mV photovoltage under 100 mW cm^?2 of simulated sunlight. The SnO_x layer makes ohmic contacts to Ni, Ir, or Pt films that act as precatalysts for the oxygen‐evolution reaction (OER) in 1.0 m KOH(aq) or 1.0 m H₂SO₄(aq). Ideal regenerative solar‐to‐O₂(g) efficiencies of 4.1% and 3.7%, respectively, are obtained in 1.0 m KOH(aq) with Ni or in 1.0 m H₂SO₄(aq) with Pt/IrO_x layers as OER catalysts. Stable photocurrents for >100 h are obtained for electrodes with patterned catalyst layers in both 1.0 m KOH(aq) and 1.0 m H₂SO₄(aq).     

Preservation of polyclonal antibody production by hybridization

The fusion of unimmunized (Balb/c × SJL)_F1, mouse spleen cells in which a polyclonal response had been induced by bacterial lipopolysaccharide with a myeloma cell line resulted in hybrid cell populations. The hybrid populations obtained elaborated antibody activity to human hemoglobin A, Keyhole Limpet hemocyanin, the dinitrophenyl (DNP) hapten, and human erythrocytes, Thus, hybridization allowed preservation of the normally transitory polyclonal response induced in mouse B cells by lipopolysaccharide. Furthermore, monospecific production of anti-DNP antibody was successfully factored out of the polyspecific production of antibodies by cloning. The expansion and subsequent injection of one of these clones into a (Balb/c × SJL)_F1 mouse resulted in the formation of an antibody-producing tumor that was successfully passed to other (Balb/c × SJL)_F1 recipients. Collection of the serum from tumor-bearing mice provided useful quantities of an anti-DNP antiserum without resort to any program of immunization whatsoever.     

Ultrathin functional star PEG coatings for DNA microarrays

In this study, star PEG coatings on glass substrates have been used as support material for oligonucleotide microarrays. These coatings are prepared from solutions of six armed star shaped prepolymers that carry reactive isocyanate endgroups. As described earlier, such films prevent the adsorption of proteins and the adhesion of cells but can easily be functionalized for specific biological recognition. Here we used the high functionality of these coatings for the covalent immobilization of amino terminated 20mer oligonucleotides, both by microcontact printing and spotting techniques. The permanent immobilization of fluorescently labeled DNA as well as hybridization of 20mer oligonucleotides have been monitored by fluorescence microscopy. The hybridization efficiency as determined by fluorescence intensity varied from 30% to 80% depending on the way of layer preparation. The direct spotting without additional activation and blocking steps of the surface demonstrates the potential of star PEG coatings as ultrathin surface modification for microarrays.     

Sul Controllo Della Glicolisi Nel Lievito

Abstract

On the control of carbohydrate utilization in yeast. — The results of a previous investigation showed that in higher plants the stimulating action of 2,4 dinitrophenol (DNP) on oxygen uptake and glycolysis is accompained by a fall of the level of reducing sugars, due to an increase of their respiratory utilization, and thus — according to every evidence — of the rate of hexose phosphate synthesis.

In the present work, the occurrence of a similar phenomenon in yeast (where the inhibiting effect of DNP on glucose uptake is not so much marked as in higher plant tissue) was investigated.

Here again DNP, at a 10^-4M concentration, induced a rapid decrease of the disaccaride trehalose and of glycogen, such as to account for the increased rate of respiration and of fermentation. The ratio between the contributions to CO₂ of Carbons 1 and respectively 6 of glucose was not significantly changed by DNP, which suggests that at least part of the DNP induced increase of glycolysis was mediated by the Embden Meyerhof pathway, and thus that a larger amount of fructose diphosphate was formed in the presence of the uncoupler.

In other experiments the effects of DNP on the dissimilation of C¹⁴ labeled glucose, glycerol and pyruvate to CO₂ and ethanol, and on the incorporation of the radioactive isotope into various fractions, 15 minutes after feeding the labeled substrates, was investigated. It was found that:

1) Glucose and glycerol uptake is not markedly inhibited by DNP at the concentration employed (^10–4M).

2) In the absence of DNP, a considerable portion of the radioactivity fed as glucose or glycerol and taken up by the yeast cells is recovered in the glycogen and trehalose fractions. (35% of the glucose, and 22% of the glycerol taken up). This is also observed for carbons 2 and 3, but not for carbon 1 of pyruvate. This indicates a reversibility of the glycolitic processes comprehended in the region between phospho-enol pyruvate andpolysac-carides; while the pyruvate kinase reaction appears to represent a sharp barrier at the « lower » end of glycolysis.

3) DNP almost completely inhibited the incorporation of C¹⁴ from glucose and glycerol into glycogen and trehalose, although it increased the rate of its dissimilation to CO₂ and ethanol. The total amount of glucose and glycerol transformed in the various metabolites (and thus — according to every evidence — phosphorylated) was somewhat lowered and proteins synthesis severely depressed. These effects are interpreted as due to the uncoupling action of DNP at the mitochondrial level, and to the consequent general decrease of the ATP and UTP levels required for protein and for polysaccharide synthesis.     

Photoinitiated alkyne-azide click and radical cross-linking reactions for the patterning of PEG hydrogels

The photolithographical patterning of hydrogels based solely on the surface immobilization and cross-linking of alkyne-functionalized poly(ethylene glycol) (PEG-tetraalkyne) is described. Photogenerated radicals as well as UV absorption by a copper chelating ligand result in the photochemical redox reduction of Cu(II) to Cu(I). This catalyzes the alkyne-azide click reaction to graft the hydrogels onto an azide-functionalized plasma polymer (N(3)PP) film. The photogenerated radicals were also able to abstract hydrogen atoms from PEG-tetraalkyne to form poly(α-alkoxy) radicals. These radicals can initiate cross-linking by addition to the alkynes and intermolecular recombination to form the PEG hydrogels. Spatially controlling the two photoinitiated reactions by UV exposure through a photomask leads to surface patterned hydrogels, with thicknesses that were tunable from tens to several hundreds of nanometers. The patterned PEG hydrogels (ca. 60 μm wide lines) were capable of resisting the attachment of L929 mouse fibroblast cells, resulting in surfaces with spatially controlled cell attachment. The patterned hydrogel surface also demonstrated spatially resolved chemical functionality, as postsynthetic modification of the hydrogels was successfully carried out with azide-functionalized fluorescent dyes via subsequent alkyne-azide click reactions.     

Direct patterning of centrosome arrays as templates for the assembly of microtubules

We have achieved, for the first time, the selective patterning of centrosomes onto solid substrates. The use of such patterned centrosome arrays as templates for the directed polymerization of microtubules was also demonstrated. Centrosomes are small organelles in animal cells that serve as nucleation and organization centers of microtubules. Directed assembly of microtubules on the patterned centrosome arrays provides a new route to control the positions and directions of microtubules on surfaces. Combining the patterning of the isolated centrosomes and the directed growth of microtubules may lead to the generation of desired microtubule networks for bio-based nanodevices.     

Development of engineered biofilms on poly- L-lysine patterned surfaces

A technique has been developed to selectively attach bacteria to solid supports using poly-l-lysine. The patterned biofilms were labeled with green fluorescent protein (GFP) or a nucleic acid stain and imaged using both confocal microscopy and GFP stereomicroscopy. E. coli DH10B, E. coli MC1061, and Pseudomonas sp. GJ1 were selectively attached to regions coated with poly-l-lysine but not to uncoated regions. In contrast, E. coli DH5, W3110 and 33456 attached indiscriminately to the coated and uncoated regions of the surface. Those organisms that selectively attached to the poly-l-lysine coated regions formed biofilms twice as thick as the organisms that attached indiscriminately to the surface. This technique can be used for selectively patterning surfaces with genetically engineered microorganisms for biosynthesis of secondary metabolites and biodegradation or for developing a bacterial-based microscale medical diagnostic tool.     

Dual Functional Electron‐Selective Contacts Based on Silicon Oxide/Magnesium: Tailoring Heterointerface Band Structures while Maintaining Surface Passivation

Silicon (Si)‐based dopant‐free heterojunction solar cells (SCs) featuring carrier‐selective contacts (CSCs) have attracted considerable interest due to the extreme simplifications in their device structure and manufacturing procedure. However, these SCs are limited by the unsatisfactory contact properties on both sides of the junction, and their efficiencies are not comparable with those of commercially available Si SCs. In this report, a high‐performance silicon‐oxide/magnesium (SiO_x/Mg) electron‐selective contact (ESC) design is described. Combining an ultrathin SiO_x and a low work function Mg layer, the novel ESC simultaneously yields low recombinative and resistive losses. In addition, deposition of Mg on SiO_x relaxes the restriction on the threshold thickness of the SiO_x for electron tunneling and therefore broadens the optimization space for rear‐sided passivation. Meanwhile, hole‐selective contact with boosted light harvesting and suppressed interfacial recombination is achieved by forming a fully conformal contact between the conducting poly(3,4‐ethylene dioxythiophene): poly(styrenesulfonate) (PEDOT: PSS) and periodic Si pyramid arrays. With the double‐sided carrier‐selective contact designs, PEDOT: PSS/Si/SiO_x/Mg SCs with efficiency of 15% are finally obtained via a totally dopant‐free processing. Subsequent calculations further indicate a pathway for the improvement of these contacts toward an efficiency that is competitive with conventionally diffused pn junction SCs.     

Dissociation kinetics of bivalent ligand-immunoglobulin E aggregates in solution

We study the dissociation of preformed bivalent ligand-bivalent receptor aggregates in solution, where the ligand is a symmetric bivalent hapten with two identical 2,4-dinitrophenyl (DNP) groups and the receptor is a fluorescein-labeled monoclonal anti-DNP IgE. We promote dissociation in two ways: by the addition of high concentrations of a monovalent hapten that competes for IgE binding sites with the bivalent hapten and by the addition of high concentrations of unlabeled IgE that binds almost all ligand binding sites that dissociate from labeled IgE. We investigate both theoretically and experimentally the two types of dissociation and find them to be quite different. Theory predicts that their kinetics will depend differently on the fundamental rate constants that characterize binding and aggregation. Using monovalent ligand to promote dissociation, we find that the fraction of labeled IgE sites bound to bivalent ligand decays with a slow and fast component. The fast decay corresponds to the dissociation of a singly bound DNP hapten. The interpretation of the slow decay depends on the detailed way in which ligand-receptor aggregates break up. We show that one possible explanation of these data is that small stable rings form before the addition of monovalent ligand. Other possible explanations are also presented.     

Tunable white light emission from single‐phased Li2SrSiO4:Dy3+ phosphors by co‐doping with Eu3+

A series of single‐phase full‐color emitting Li₂Sr_1−x−ySiO₄:xDy³⁺,yEu³⁺ phosphors were synthesized by solid‐state reaction and characterized by X‐ray diffraction and photoluminescence analyses. The samples showed emission peaks at 488 nm (blue), 572 nm (yellow), 592 nm (orange) and 617 nm (red) under 393 nm excitation. The photoluminescence excitation spectra, comprising the Eu–O charge transfer band and 4f–4f transition bands of Dy³⁺ and Eu³⁺, range from 200 to 500 nm. The Commission Internationale de I'Eclairage chromaticity coordinates for Li₂Sr_0.98−xSiO₄:0.02Dy³⁺,xEu³⁺ phosphors were simulated. By manipulating Eu³⁺ and Dy³⁺ concentrations, the color points of Li₂Sr_1−x−ySiO₄:xDy³⁺,yEu³⁺ were tuned from the greenish‐white region to white light and eventually to reddish‐white region, demonstrating that a tunable white light can be obtained by Li₂Sr_1−x−ySiO₄:xDy³⁺,yEu³⁺ phosphors. Li₂Sr_0.98−xSiO₄:0.02Dy³⁺, xEu³⁺ can serve as a white‐light‐emitting phosphor for phosphor‐converted light‐emitting diode. Copyright © 2014 John Wiley & Sons, Ltd.     

Bacterial collagen‐binding domain targets undertwisted regions of collagen

Clostridium histolyticum collagenase causes extensive degradation of collagen in connective tissue that results in gas gangrene. The C‐terminal collagen‐binding domain (CBD) of these enzymes is the minimal segment required to bind to a collagen fibril. CBD binds unidirectionally to the undertwisted C‐terminus of triple helical collagen. Here, we examine whether CBD could also target undertwisted regions even in the middle of the triple helix. Collageneous peptides with an additional undertwisted region were synthesized by introducing a Gly → Ala substitution [(POG)_xPOA(POG)_y]₃, where x + y = 9 and x > 3). ¹H–¹⁵N heteronuclear single quantum coherence nuclear magnetic resonance (HSQC NMR) titration studies with ¹⁵N‐labeled CBD demonstrated that the minicollagen binds to a 10 Å wide 25 Å long cleft. Six collagenous peptides each labeled with a nitroxide radical were then titrated with ¹⁵N‐labeled CBD. CBD binds to either the Gly → Ala substitution site or to the C‐terminus of each minicollagen. Small‐angle X‐ray scattering measurements revealed that CBD prefers to bind the Gly → Ala site to the C‐terminus. The HSQC NMR spectra of ¹⁵N‐labeled minicollagen and minicollagen with undertwisted regions were unaffected by the titration of unlabeled CBD. The results imply that CBD binds to the undertwisted region of the minicollagen but does not actively unwind the triple helix.     

Near real-time biosensor-based detection of 2,4-dinitrophenol

A fluorescent biosensor assay has been developed for near real-time detection of 2,4-dinitrophenol (DNP). The assay was based on fluorescent detection principles that allow for the analysis of antibody/antigen interactions in solution using the KinExA immunoassay instrument. Our KinExA consisted of a capillary flow observation cell containing a microporous screen that maintains a compact capture antigen-coated bead bed. The bead bed was comprised of polymethylmethacrylate (PMMA) beads coated with dinitrophenol-human serum albumin (DNP-HSA) conjugate. Phosphate buffered saline (PBS) solutions, containing various concentrations of free DNP, were incubated for 30 min with mouse anti-DNP monoclonal antibody to equilibrium. Solutions containing the DNP-monoclonal antibody complex and possible excess free antibodies were then passed over DNP-HSA labeled beads. The free monoclonal anti-DNP antibody, if available, was then bound to the DNP-HSA fixed on the beads. The system was then flushed with excess PBS to remove unbound reactants in the bead bed. The beads were then subjected to brief contact with PBS solutions containing goat anti-mouse fluorescein isothiocyanate (FITC)-labeled secondary antibody, once again, followed by a short PBS flush. The fluorescence was recorded during the addition of the FITC labeled secondary antibody to the bead bed through the final PBS flushing with the KinExA. The amount of DNP detected could then be determined from the fluorescent slopes that were generated or by the remaining fluorescence that was retained on the beads after final PBS flushing of the system. This assay has been able to detect a minimum of 5 ng/ml of DNP in solution and can be adapted for other analytes of interest simply by changing the capture antigen and antibody pairs.     

A new immunosensing method by galactose oxidase-mediated electrocatalysis using a virtual beaker array

We report a novel and convenient method for the determination of glycoproteins, especially antibodies, using galactose oxidase (GAO) on the basis of the contents of galactosyl and N-acetylgalactosaminyl residues in carbohydrate chains of glycoproteins. GAO converts galactose residues to their corresponding aldehyde and H₂O₂, the latter being electroactive and quantifiable by DC amperometry. The method does not require processes such as antibody labeling or the use of enzyme-tagged secondary antibodies. For an array-type immunosensing, the platform surface for antigen immobilization was specially designed by using differentiated surface wetting property of hydrophobic and hydrophilic patterns. We patterned the hydrophobic surface of the poly(dimethylsiloxane) substrate by microcontact printing with the poly(amidoamine) dendrimer ink, providing hydrophilic patterns on a hydrophobic base substrate. By applying aqueous solution on the patterned surface, an array of free-standing water droplets was made. With the prepared virtual beaker array, electrochemical immunosensing was performed by using anti-dinitrophenyl-IgG as a model target protein. From immunoassay with GAO-mediated electrocatalysis, a good correlation in amperometric signal with the target IgG was registered. The total assay time was about 20 min, including antibody recognition and signal registration.     

Bioelectrocatalytic signaling from immunosensors with back-filling immobilization of glucose oxidase on biorecognition surfaces

We report a novel method of electrochemical signaling from antigen-antibody interactions at immunoelectrodes with bioelectrocatalyzed enzymatic signal amplification. For the immunosensing surface construction, a poly(amidoamine) G4-dendrimer was employed not only as a building block for the electrode surface modification but also as a matrix for ligand functionalization. As a model biorecognition reaction, the dinitrophenyl (DNP) antigen-functionalized electrode was fabricated and an anti-DNP antibody was used. Glucose oxidase (GOX) was chosen to amplify electrochemical signal by enzymatic catalysis. The signal amplification strategy introduced in this study is based on the back-filling immobilization of biocatalytic enzyme to the immunosensor surface, circumventing the use of an enzyme-labeled antibody. The non-labeled native antibody was biospecifically bound to the immobilized ligand, and the activated enzyme (periodate-treated GOX) reacted and "back-filled" the remaining surface amine groups on the dendrimer layer by an imine formation reaction. From the bioelectrocatalyzed signal registration with the immobilized GOX, the surface density of biospecifically bound antibody could be estimated. The DNP functionalization reaction was optimized to facilitate the antibody recognition and signaling reactions, and approximately 6% displacement of surface amine to DNP was found to be an optimum. From quartz crystal microbalance measurement, immunosensing reaction timing and the surface inertness to the nonspecific biomolecular binding were tested. By changing the surface functionalization level of DNP in the calibration experiments, immunosensors exhibited different dynamic detection ranges and limits of detection, supporting the capability of parameters modulation for the immunosensors. For the anti-DNP antibody assay, the fabricated immunosensor having 65% functionalization ratio exhibited the linear detection range of 10(-4) to 0.1 g/L protein and a limit of detection around 2 x 10(-5) g/L.     

Endosomal density shift is related to a decrease in fusion capacity.

Dinitrophenol (DNP)-beta-glucuronidase and mannosylated anti-DNP IgG, which are endocytosed by the mannose receptor and delivered to lysosomes, were previously developed as probes for examination of fusion between early endosomes in a cell-free system. In this study, these probes were found to be transported by intact cells to endocytic vesicles with heavy buoyant density at different rates, as determined by Percoll gradient fractionation of cell homogenates. There was a concomitant loss of in vitro fusion activity as the ligands moved to dense compartments. In monensin-treated cells, DNP-beta-glucuronidase was retained in a light compartment corresponding to intracellular vesicles capable of fusion in vitro. Pulse-chase studies using a DNP-derivatized transferrin-alkaline phosphatase conjugate showed that a recycling ligand was always found in light intracellular vesicles that were capable of fusion to early endosomes in vitro. In contrast to cell-free systems, intact cells sequentially labeled with DNP-beta-glucuronidase and then mannosylated anti-DNP IgG showed ligand mixing in both early and late endocytic compartments. Treatment with nocodazole or colchicine did not affect the rate of DNP-beta-glucuronidase transport to heavy vesicles in intact cells, however, the extent of ligand mixing in late endosomes was decreased by microtubule disruption. Using sequentially labeled cells split into two groups, we directly compared ligand mixing in vitro to mixing by intact cells. Fusion alone does not mediate increases in vesicle density, since DNP-beta-glucuronidase/anti-DNP IgG complexes formed in vitro were found in light vesicles, while intact cells showed immune complexes predominantly in heavy vesicles. These results suggest that the density shift is an initial step in targeting to lysosomes.