Immobilization of soybean (Glycine max) urease on alginate and chitosan beads showing improved stability: Analytical applications

The soybean (Glycine max) urease was immobilized on alginate and chitosan beads and various parameters were optimized and compared. The best immobilization obtained were 77% and 54% for chitosan and alginate, respectively. A 2% chitosan solution (w/v) was used to form beads in 1N KOH. The beads were activated with 1% glutaraldehyde and 0.5 mg protein was immobilized per ml of chitosan gel for optimum results. The activation and coupling time were 6 h and 12 h, respectively. Further, alginate and soluble urease were mixed to form beads and final concentrations of alginate and protein in beads were 3.5% (w/v) and 0.5 mg/5 ml gel. From steady-state kinetics, the optimum temperature for urease was 65 °C (soluble), 75 °C (chitosan) and 80 °C (alginate). The activation energies were found to be 3.68 kcal mol⁻¹, 5.02 kcal mol⁻¹, 6.45 kcal mol⁻¹ for the soluble, chitosan- and alginate-immobilized ureases, respectively. With time-dependent thermal inactivation studies, the immobilized urease showed improved stability at 75 °C and the t_1/2 of decay in urease activity was 12 min, 43 min and 58 min for soluble, alginate and chitosan, respectively. The optimum pH of urease was 7, 6.2 and 7.9 for soluble, alginate and chitosan, respectively. A significant change in K_m value was noticed for alginate-immobilized urease (5.88 mM), almost twice that of soluble urease (2.70 mM), while chitosan showed little change (3.92 mM). The values of V_max for alginate-, chitosan-immobilized ureases and soluble urease were 2.82 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein, 2.65 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein and 2.85 × 10² μmol NH₃ min⁻¹ mg⁻¹ protein, respectively. By contrast, reusability studies showed that chitosan–urease beads can be used almost 14 times with only 20% loss in original activity while alginate–urease beads lost 45% of activity after same number of uses. Immobilized urease showed improved stability when stored at 4 °C and t_1/2 of urease was found to be 19 days, 80 days and 121 days, respectively for soluble, alginate and chitosan ureases. The immobilized urease was used to estimate the blood urea in clinical samples. The results obtained with the immobilized urease were quite similar to those obtained with the autoanalyzer^®. The immobilization studies have a potential role in haemodialysis machines.     

Influence of the composition and preparation method on the morphology and swelling behavior of alginate–chitosan hydrogels

In this study, a 2⁴ factorial experimental design was employed in order to evaluate the influence of the reaction conditions and preparation method on alginate–chitosan hydrogel properties. Alginate content, pH, chitosan molecular weight and the hydrogel preparation method were the independent variables and the reaction yield, particle size, swelling degree and point of zero surface charge were the dependent variables. The results showed that hydrogels were spherical with an average diameter of 5.0 ± 2.0 μm. Reaction yield varied according to the parameters, and chitosan molecular weight showed the greatest influence. Furthermore, the swelling degree and point of zero surface charge showed a linear dependence on the alginate content. In this regard, the study showed that hydrogels with a specific charge and swelling degree can be obtained by controlling the alginate content using the equation here provided to give an enhanced and site-specific controlled drug release.     

The routine metabolic rate of mulloway (Argyrosomus japonicus: Sciaenidae) and yellowtail kingfish (Seriola lalandi: Carangidae) acclimated to six different temperatures

This study compared the mass-specific routine metabolic rate (RMR) of similar sized mulloway (Argyrosomus japonicus), a sedentary species, and yellowtail kingfish (Seriola lalandi), a highly active species, acclimated at one of several temperatures ranging from 10–35 °C. Respirometry was carried out in an open-top static system and RMR corrected for seawater–atmosphere O₂ exchange using mass-balance equations. For both species RMR increased linearly with increasing temperature (T). RMR for mulloway was 5.78T − 29.0 mg O₂ kg^− 0.8 h^− 1 and for yellowtail kingfish was 12.11T − 39.40 mg O₂ kg^− 0.8 h^− 1. The factorial difference in RMR between mulloway and yellowtail kingfish ranged from 2.8 to 2.2 depending on temperature. The energetic cost of routine activity can be described as a function of temperature for mulloway as 1.93T − 9.68 kJ kg^− 0.8 day^− 1 and for yellowtail kingfish as 4.04T − 13.14 kJ kg^− 0.8 day^− 1. Over the full range of temperatures tested Q₁₀ values were approximately 2 for both species while Q₁₀ responses at each temperature increment varied considerably with mulloway and yellowtail kingfish displaying thermosensitivities indicative of each species respective niche habitat. RMR for mulloway was least thermally dependent at 28.5 °C and for yellowtail kingfish at 22.8 °C. Activation energies (E_a) calculated from Arrhenius plots were not significantly different between mulloway (47.6 kJ mol^− 1) and yellowtail kingfish (44.1 kJ mol^− 1).     

Thermoregulation of water foraging wasps (Vespula vulgaris and Polistes dominulus)

A comparison of the thermoregulation of water foraging wasps (Vespula vulgaris, Polistes dominulus) under special consideration of ambient temperature and solar radiation was conducted. The body surface temperature of living and dead wasps was measured by infrared thermography under natural conditions in their environment without disturbing the insects’ behaviour. The body temperature of both of them was positively correlated with T_a and solar radiation. At moderate T_a (22–28 °C) the regression lines revealed mean thorax temperatures (T_th) of 35.5–37.5 °C in Vespula, and of 28.6–33.7 °C in Polistes. At high T_a (30–39 °C) T_th was 37.2–40.6 °C in Vespula and 37.0–40.8 °C in Polistes. The thorax temperature excess (T_th–T_a) increased at moderate T_a by 1.9 °C (Vespula) and 4.4 °C (Polistes) per kW⁻¹ m⁻². At high T_a it increased by 4.0 °C per kW⁻¹ m⁻² in both wasps. A comparison of the living water foraging Vespula and Polistes with dead wasps revealed a great difference in their thermoregulatory behaviour. At moderate T_a (22–28 °C) Vespula exhibited distinct endothermy in contrast to Polistes, which showed only a weak endothermic activity. At high T_a (30–39 °C) Vespula reduced their active heat production, and Polistes were always ectothermic. Both species exhibited an increasing cooling effort with increasing insolation and ambient temperature.     

Characterization of galactomannans isolated from legume endosperms of Caesalpinioideae and Faboideae subfamilies by multidetection aqueous SEC

Galactomannans isolated from legume seed endosperms, including those of commercial interest, have been characterized by multidetection aqueous SEC. Galactomannans derived from seeds of the Faboideae subfamily had substantially higher M_w than those from Caesalpinioideae seeds (M_w,Fab = 2.4–3.1 × 10⁶ g/mol, M_w,Caes. = 0.86–2.1 × 10⁶ g/mol) and within the latter botanical subfamily, an apparent correlation between M_w and the degree of galactose substitution DG was found. The molar mass distributions were unimodal and differed primarily by a scale factor, with distributional widths narrower than a true Flory ‘most-probable distribution’; good fits to Schulz–Zimm model were obtained. Across subfamilies no differences were found in the exponents of [η]–M and R_v–M relationships (0.61 ± 0.02, 0.54 ± 0.01, respectively), the Flory chain stiffness ratio (C_∞ = 20 ± 1 (BSF analysis)), or the persistence length (L_p = 5.5 ± 0.2 nm) obtained from SEC fraction data. However, it was found that prefactors in the [η]–M and R_v–M relationships as well as the unperturbed parameter K_Θ decrease in proportion to DG and therefore chain density. Generalized relationships incorporating galactose-dependent prefactors were therefore developed to model SEC fraction data of native galactomannans ([η]_GM = (1800 ± 200) × M_o^−1.61 × M^0.61±0.02, R_v,GM = 0.63 ± 0.05 × M_o^−0.54 × M^0.54±0.01) as well as lower-M fractions obtained by ultrasonication ([η]_GM = (730 ± 100) × M_o^−1.71 × M_w^0.71±0.02, R_v,GM = 0.49 ± 0.05 × M_o^−0.57 × M_w^0.57±0.01, M ≈ 1 × 10⁵-native). As a consequence of this dependence and the observed patterns in molar mass variation, [η] varies within a narrow range for galactomannans as a whole despite substantial M_w differences.     

Phytoaccumulation of zinc by the aquatic plant, Lemna gibba L.

The uptake of zinc (Zn) by the duckweed Lemna gibba L., native to the north-east region of Algeria, was investigated in quarter Coïc solutions enriched with 6.0, 10.0, 14.0 and 18.0 mg l⁻¹ of Zn supplied as zinc sulphate (ZnSO₄). Zinc concentrations were measured in the water daily and in duckweed biomass at the end of the experiments. These results showed that under experimental conditions (pH = 6.0 ± 0.1, T = 21 ± 1 °C, photoperiod = 12 h/j), L. gibba was able to accumulate in its biomass 4.23; 15.62; 23.88 and 25.81 mg g⁻¹ DM, respectively for the four initial concentrations selected. At these concentrations, the metal removed percentages were 61–71%. The mass balance performed on the system showed that about 49–68% of Zn (depending on the initial concentration in water) was removed by precipitation as zinc phosphate. The results showed that this aquatic plant can be successfully used for Zn removal.     

Comparisons of the release of vasodilator substances from left and right cardiac chambers of the isolated perfused rabbit heart: Implications for intraventricular thrombus formation

Prostacyclin (PgI₂) and endothelium-derived nitric oxide (EDNO) are produced by the arterial and venous endothelium. In addition to their vasodilator action on vascular smooth muscle, both act together to inhibit platelet aggregation and promote platelet disaggregation. EDNO also inhibits platelet adhesion to the endothelium. EDNO and PgI₂ have been shown to be released from the cultured endocardial cells. In this study, we examined the release of vasoactive substances from the intact endocardium by using isolated rabbit hearts perfused with physiological salt solution (95% O₂/5% CO₂, T = 37 °C). The right and left cardiac chambers were perfused through separate constant-flow perfusion loops (physiological salt solution, 8 ml min⁻¹). Effluent from left and right cardiac, separately, was bioassayed on canine coronary artery smooth muscle, which had been contracted with prostaglandin F_{2α_}(2 × 10⁻⁶ M) and no change in tension was exhibit. However, addition of calcium ionophore A23187 (10⁻⁶ M) to the cardiac chambers’ perfusion line induced vasodilation of the bioassay coronary ring, 61.4 ± 7.4% versus 70.49 ± 6.1% of initial prostaglandin F_2α contraction for the left and right cardiac chambers perfusate, respectively (mean ± SEM, n = 10, p > 0.05). Production of vasodilator was blocked totally in the left heart but, only partially blocked in the right heart by adding indomethacin (10⁻⁵ M) to the perfusate, respectively, 95.2 ± 2.2% versus 41.5 ± 4.8% (mean ± SEM, n = 10, p < 0.05). 6-Keto prostaglandin F_1α, measured in the endocardial superfusion effluent was also higher for the left cardiac chambers than for the right at the time of stimulation with the A23187, respectively, 25385.88 ± 5495 pg/ml (n = 8) versus 13,132.45 ± 1839.82 pg/ml (n = 8), (p < 0.05). These results showed that cyclooxygenase pathway plays major role in generating vasoactive substances for the left cardiac chamber endocardium; while it is not the main pathway for the right ventricular endocardium at which EDNO and PgI₂ could act together and potentiate their antithrombogenic activities in isolated perfused rabbit heart. This may be an explanation for the intraventricular thrombus mostly seen in left ventricle rather than in right ventricle as a complication of myocardial infarction.     

Cyclodextrin production by Bacillus firmus strain 37 immobilized on inorganic matrices and alginate gel

Production of β-cyclodextrin (β-CD) by Bacillus firmus strain 37 cells, immobilized by adsorption on silica–titania (SiO₂/TiO₂) and silica–manganese dioxide (SiO₂/MnO₂) matrices, was optimized for temperature, substrate concentration and initial biomass. The immobilization process was most efficient at 60 °C with 10% maltodextrin and 1.0 g of cells, resulting, after a 5-day assay, in a β-CD production of 11.7 ± 0.1 mM for cells immobilized on SiO₂/TiO₂ and 11.2 ± 0.1 mM in SiO₂/MnO₂. Entrapment in alginate gel resulted in a maximum β-CD production of 4.1 ± 0.1 mM, which was maintained constantly until the end of a 10-day assay. During this same period, free cells produced 8.3 ± 0.2 mM, and cells immobilized on SiO₂/TiO₂ and SiO₂/MnO₂, 16.7 ± 0.4 and 17.3 ± 0.5 mM, respectively. β-CD production by cells immobilized in calcium alginate in four repetitive cycles of 5 days each, showed an increase up to the third cycle, reaching 4.8 ± 0.2 mM, while production by free cells started falling from the second cycle. In this same assay, cells immobilized on SiO₂/TiO₂ and SiO₂/MnO₂, showed the best β-CD production results at the end of the first cycle, with a gradual fall occurring due to the desorption of cells thereafter.     

Macromolecular conformation of chitosan in dilute solution: A new global hydrodynamic approach

Chitosans of different molar masses were prepared by storing freshly prepared samples for up to 6 months at either 4, 25 or 40 °C. The weight-average molar masses, M_w and intrinsic viscosities, [η] were then measured using size exclusion chromatography coupled to multi-angle laser light scattering (SEC-MALLS) and a “rolling ball” viscometer, respectively.The solution conformation of chitosan was then estimated from:

(a) the Mark–Houwink–Kuhn–Sakurada (MHKS) power law relationship [η] = kM_w^a and

(b) the persistence length, L_p calculated from a new approach based on equivalent radii [Ortega, A., & Garcia de la Torre, J. (2007). Equivalent radii and ratios of radii from solution properties as indicators of macromolecular conformation, shape, and flexibility. Biomacromolecules, 8, 2464–2475].

Both the MHKS power law exponent (a = 0.95 ± 0.01) and the persistence length (L_p = 16 ± 2 nm) are consistent with a semi-flexible rod type (or stiff coil) conformation for all 33 chitosans studied. A semi-flexible rod conformation was further supported by the Wales–van Holde ratio, the translational frictional ratio and sedimentation conformation zoning.     

Use of a real-time remote monitoring network (RTRM) and shipborne sampling to characterize a dinoflagellate bloom in the Neuse Estuary, North Carolina, USA

The spatial-temporal distribution of a dinoflagellate bloom dominated or co-dominated by Prorocentrum minimum was examined during autumn through early spring in a warm temperate, eutrophic estuary. The developing bloom was first detected from a web-based alert provided by a network of real-time remote monitoring (RTRM) platforms indicating elevated dissolved oxygen and pH levels in upper reaches of the estuary. RTRM data were used to augment shipboard sampling, allowing for an in-depth characterization of bloom initiation, development, movement, and dissipation. Prolonged drought conditions leading to elevated salinities, and relatively high nutrient concentrations from upstream inputs and other sources, likely pre-disposed the upper estuary for bloom development. Over a 7-month period (October 2001–April 2002), the bloom moved toward the northern shore of the mesohaline estuary, intensified under favorable conditions, and finally dissipated after a major storm. Bloom location and transport were influenced by prevailing wind structure and periods of elevated rainfall. Chlorophyll a within bloom areas averaged 106 ± 13 μg L⁻¹ (mean ± 1 S.E.; maximum, 803 μg L⁻¹), in comparison to 20 ± 1 μg L⁻¹ outside the bloom. There were significant positive relationships between dinoflagellate abundance and TN and TP. Ammonium, NO₃⁻, and SRP concentrations did not decrease within the main bloom, suggesting that upstream inputs and other sources provided nutrient-replete conditions. In addition, PAM fluorometric measurements (09:00–13:00 h) of maximal PSII quantum yield (F_v/F_m) were consistently 0.6–0.8 within the bloom until late March, providing little evidence of photo-physiological stress as would have been expected under nutrient-limiting conditions. Nitrogen uptake kinetics were estimated for P. minimum during the period when that species was dominant (October–December 2001), based on literature values for N uptake by an earlier P. minimum bloom (winter 1999) in the Neuse Estuary. The analysis suggests that NH₄⁺ was the major N species that supported the bloom. Considering the chlorophyll a concentrations during October and December and the estimated N uptake rates, phytoplankton biomass was estimated to have doubled once per day. Bloom displacement (January–February) coincided with higher diversity of heterotrophic dinoflagellate species as P. minimum abundance decreased. This research shows the value of RTRM in bloom detection and tracking, and advances understanding of dinoflagellate bloom dynamics in eutrophic estuaries.     

Response surface design for the optimization of enzymatic detection of mercury in aqueous solution using immobilized urease from vegetable waste

Soluble and alginate immobilized urease was utilized for detection and quantitation of mercury in aqueous samples. Urease from the seeds of pumpkin, being a vegetable waste, was extracted and purified to apparent homogeneity (sp. activity 353 U/mg protein; A₂₈₀/A₂₆₀ = 1.12) by heat treatment at 48 ± 0.1 °C and gel filtration through Sephadex G-200. Homogeneous enzyme preparation was immobilized in 3.5% alginate leading to 86% immobilization, no leaching of enzyme was found over a period of 15 days at 4 °C. Urease catalyzed urea hydrolysis by soluble and immobilized enzyme revealed a clear dependence on the concentration of Hg²⁺. Inhibition caused by Hg²⁺ was non-competitive (K_i = 1.2 × 10⁻¹ μM for soluble and 1.46 × 10⁻¹ μM for alginate immobilized urease.). Time-dependent inhibition both in presence and in absence of Hg²⁺ ion revealed a biphasic inhibition in activity. For optimization of this process response surface methodology (RSM) was utilized where two-level-two-full factorial (2²) central composite design (CCD) has been employed. The regression equation and analysis of variance (ANOVA) were obtained using MINITAB^® 15 software. Predicted values thus obtained were closed to experimental value indicating suitability of the model. 3D response surface plot, iso-response contour plot and process optimization curve were helpful to predict the results by performing only limited set of experiments.     

Amino acid modified chitosan beads: Improved polymer supports for immobilization of lipase from Candida rugosa

Amino acid modified chitosan beads (CBs) for immobilization of lipases from Candida rugosa were prepared by activation of a chitosan backbone with epichlorohydrin followed by amino acid coupling. The beads were analyzed by elemental analysis and solid state NMR with coupling yields of the amino acids ranging from 15 to 60%. The immobilized lipase on unmodified chitosan beads showed the highest immobilization yield (92.7%), but its activity was relatively low (10.4%). However, in spite of low immobilization yields (15–50%), the immobilized lipases on the amino acid modified chitosan beads showed activities higher than that of the unmodified chitosan beads, especially on Ala or Leu modified chitosan beads (Ala-CB or Leu-CB) with 49% activity for Ala-CB and 51% for Leu-CB. The immobilized lipases on Ala-CB improved thermal stability at 55 °C, compared to free and immobilized lipases on unmodified chitosan beads and the immobilized lipase on Ala-CB retained 93% of the initial activity when stored at 4 °C for 4 weeks. In addition, the activity of the immobilized lipase on Ala-CB retained 77% of its high initial activity after 10 times of reuse. The kinetic data (k_cat/K_m) supports that the immobilized lipase on Ala-CB can give better substrate specificity than the unmodified chitosan beads.     

Effects of temperature, salinity and irradiance on the growth of the red tide dinoflagellate Gyrodinium instriatum Freudenthal et Lee

The effects of temperature, salinity and irradiance on the growth of the red tide dinoflagellate Gyrodinium instriatum Freudenthal et Lee were examined in the laboratory. Exposed to 45 different combinations of temperature (10–30 °C) and salinity (0–40) under saturating irradiance, G. instriatum exhibited its maximum growth rate of 0.7 divisions/day at a combination of 25 °C and a salinity of 30. Optimum growth rates (>0.5 divisions/day) were observed at temperatures ranging from 20 to 30 °C and at salinities from 10 to 35. The organism could not grow at ≤10 °C. In addition, G. instriatum burst at a salinity of 0 at all temperatures, but grew at a salinity of 5 at temperatures between 20 and 25 °C. It is noteworthy that G. instriatum is a euryhaline organism that can live under extremely low salinity. Factorial analysis revealed that the contributions of temperature and salinity to its growth of the organism were almost equal. The irradiance at the light compensation point (I₀) was 10.6 μmol/(m² s) and the saturated irradiance for growth (I_s) was 70 μmol/(m² s), which was lower than I_s for several other harmful dinoflagellates (90–110 μmol/(m² s)).     

ICChI, a glycosylated chitinase from the latex of Ipomoea carnea

A multi-functional enzyme ICChI with chitinase/lysozyme/exochitinase activity from the latex of Ipomoea carnea subsp. fistulosa was purified to homogeneity using ammonium sulphate precipitation, hydrophobic interaction and size exclusion chromatography. The enzyme is glycosylated (14–15%), has a molecular mass of 34.94 kDa (MALDI–TOF) and an isoelectric point of pH 5.3. The enzyme is stable in pH range 5.0–9.0, 80 °C and the optimal activity is observed at pH 6.0 and 60 °C. Using p-nitrophenyl-N-acetyl-β-d-glucosaminide, the kinetic parameters K_m, V_max, K_cat and specificity constant of the enzyme were calculated as 0.5 mM, 2.5 × 10⁻⁸ mol min⁻¹ μg enzyme⁻¹, 29.0 s⁻¹ and 58.0 mM⁻¹ s⁻¹ respectively. The extinction coefficient was estimated as 20.56 M⁻¹ cm⁻¹. The protein contains eight tryptophan, 20 tyrosine and six cysteine residues forming three disulfide bridges. The polyclonal antibodies raised and immunodiffusion suggests that the antigenic determinants of ICChI are unique. The first fifteen N-terminal residues G–E–I–A–I–Y–W–G–Q–N–G–G–E–G–S exhibited considerable similarity to other known chitinases. Owing to these unique properties the reported enzyme would find applications in agricultural, pharmaceutical, biomedical and biotechnological fields.     

Physicochemical properties and antitumor activities for sulfated derivatives of lentinan

Five fractions of lentinan, a β-(1→3)-d-glucan bearing β-(1→6)-d-glucopyranosyl branches, were treated with chlorosulfonic acid for 90 min at 60 °C in pyridine medium to synthesize water-soluble sulfated derivatives having the substitution degree of 1.44–1.76. The ¹³C NMR spectra of the sulfated β-glucans indicated that the C-6 position was preferentially substituted by the sulfate groups. The values of the weight-average molecular weight (M_w), radius of gyration (), and intrinsic viscosity ([η]) of the sulfated lentinan fractions were determined by size-exclusion chromatography with multi-angle laser light scattering (SEC–MALLS) and viscometry in 0.15 M aq NaCl at 25 °C, respectively. The dependence of [η] on M_w for the sulfated lentinan was found to be [η] = 8.93 × 10⁻³ (mL/g) in 0.15 M aq NaCl (for M_w ranging from 14.6 × 10⁴ to 50.4 × 10⁴). On the basis of the Yamakawa–Fujii–Yoshizaki (YFY) theory, the conformational parameters of the sulfated lentinan were calculated as 950 nm⁻¹ for the molar mass per unit contour length (M_L), 4.8 nm for the persistence length (q), and 13.9 for the characteristic ratio (C_∞), indicating relatively extended single flexible chains in solution. The sulfated glucan fractions exhibited in vitro antiproliferative activities against sarcoma 180 (S-180) cells, and their inhibition ratios were lower than that of the triple-helix lentinan, but higher than that for the one with single random-coil lentinan chains.     

Novel chitosan membranes as support for lipases immobilization: Characterization aspects

Membranes of chitosan (QS), chitosan treated with glutaraldehyde (QGA) and chitosan crown ether (QCE) were utilized as carriers for immobilization of Candida antarctica and Candida rugosa lipases. Membrane supports were characterized by several techniques (Raman spectroscopy, elemental analysis by CHN determination and Energy Dispersive X-ray (EDX), water sorption isotherms, and surface area from nitrogen sorption data). To verify the presence of enzymes, some of these techniques were also used for lipase on chitosan biocatalytic systems. Measurements of protein load from Biuret assays and catalytic activity in esterification in nonaqueous media were also made for the immobilized enzymes. Sorption isotherms at 20, 30, 40 and 50 °C for QS, QGA and QCE supports were fitted to the Guggenheim, Anderson and Böer model. GAB monolayer moisture parameter, Xm, varied between 0.029 and 0.051 for QS, 0.039 and 0.058 for QGA and 0.039–0.075 g of water g⁻¹ s.s. for QCE membranes. Elemental analysis and Raman spectra measurements of the lipase, supports and immobilized lipase systems gave evidence of the presence of enzymes on supports. Chitosan supports with internal surface area (m2 g⁻¹) among 3.31 and 1.26 were obtained. Regardless of these low values, acceptable protein load (0.61 to 3.21%) and esterification initial rates were achieved (0.88–2.75 mmol min⁻¹ g of protein⁻¹).     

Kinetic analyses for bindings of concanavalin A to dispersed and condensed mannose surfaces on a quartz crystal microbalance

A biotinylated mannotriose (Man3-bio) was dispersively immobilized in the matrix of biotinylated lactose (Gal-Glc-bio) on a streptavidin-covered, 27-MHz quartz crystal microbalance (QCM), and binding kinetics of concanavalin A (Con A) to Man3-bio in the Gal-Glc-bio matrix could be obtained from frequency decreases (mass increases) of the QCM. Association constants (K_a) and binding and dissociation rate constants (k_on and k_off) could be determined separately as the 1:1 and 1:2 bindings of Con A to Man3-bio on the surface. When Man3-bio was immobilized with content of 1 to 5 mol% in the matrix, the 1:1 binding of Con A to Man3-bio was obtained as K_a = (4 ± 1) × 10⁶ M⁻¹, k_on = (4 ± 1) × 10⁴ M⁻¹ s⁻¹, and k_off = (12 ± 2) × 10^–3 s⁻¹. On the contrary, when Man3-bio was immobilized with content of 20 to 100 mol% in the matrix, the 1:2 binding of Con A to Man3-bio was obtained as K_a = (14 ± 2) × 10⁶ M⁻¹, k_on = (14 ± 2) × 10⁴ M⁻¹ s⁻¹, and k_off = (7 ± 2) × 10^–3 s⁻¹. Thus, K_a for the 1:2 binding was 10 times larger than that for the 1:1 binding, with a three times larger binding rate constant (k_on) and a three times smaller dissociation rate constant (k_off). This is the first example to obtain separate kinetic parameters for the 1:1 and 1:2 bindings of lectins to carbohydrates on the surface.     

Evaluation of Gracilaria caudata J. Agardh for bioremediation of nutrients from shrimp farming wastewater

The accelerated development of shrimp farming in Brazil in recent decades has caused negative impacts to the environment. The most evident effects resulting from this activity is the increase in organic material, the reduction in oxygen and the excessive rise in water nutrients. Thus, there is a need for finding alternative solutions that can mitigate the negative impacts caused by this activity. A potentially viable solution is the use of macroalgae to remove nutrients from the cultivation systems. This study examined in situ (shrimp pond), the growth and storage of nitrogen and phosphorous from the macroalga Gracilaria caudata. A short-term measurement experiment was also conducted to evaluate the bioremediation potential this species. These results showed positive values for biomass and growth during the study period, except at day 45 for the tubular nets and day 75 for the cages, when they reached lower values than those of the initial weight. The results obtained indicate that G. caudata may reach annual production of 59.16 ton ha⁻¹ of wet weight, which corresponds to 11.83 ton dry weight. Nitrogen and phosphorous content in the algal tissues increased with time. The mean for the period was 2.61 ± 0.26% and 0.20 ± 0.03% for the nitrogen and phosphorous, respectively. An estimate of the data showed that 1 ha of cultivated algae has the potential to remove 0.309 ton ha⁻¹ year⁻¹ of nitrogen and 0.024 ton ha⁻¹ year⁻¹ of phosphorous. The study of the biofiltration capacity of G. caudata showed a significant reduction in nutrients. The removal of NH₄–N was around 59.5%, NO₃–N 49.6% and PO₄–P 12.3% in 4 h. These results suggest that although G. caudata showed relatively modest growth rates, they can be cultivated together with shrimp and can contribute to the removal of nitrogen and phosphorous from the pond. Moreover, the capacity to efficiently remove nutrients demonstrated in laboratory experiments encourages the use of this alga as a bioremediation agent.     

Study on biomass circulation and gasification performance in a clapboard-type internal circulating fluidized bed gasifier

We investigated the solid particle flow characteristics and biomass gasification in a clapboard-type internal circulating fluidized bed reactor. The effect of fluidization velocity on particle circulation rate and pressure distribution in the bed showed that fluidization velocities in the high and low velocity zones were the main operational parameters controlling particle circulation. The maximum internal circulation rates in the low velocity zone came almost within the range of velocities in the high velocity zone, when u_H/u_mf = 2.2–2.4 for rice husk and u_H/u_mf = 3.5–4.5 for quartz sand. In the gasification experiment, the air equvalence ratio (ER) was the main controlling parameter. Rice husk gasification gas had a maximum heating value of around 5000 kJ/m³ when ER = 0.22–0.26, and sawdust gasification gas reached around 6000–6500 kJ/m³ when ER = 0.175–0.24. The gasification efficiency of rice husk reached a maximum of 77% at ER = 0.28, while the gasification efficiency of sawdust reached a maximum of 81% at ER = 0.25.     

High-performance affinity capture-removal of bacterial pyrogen from solutions

Synthetic peptide S3Δ has high affinity for bacterial endotoxin or lipopolysaccharide (LPS). Under tested conditions of pH 5–9 and 0–0.4 M NaCl, the affinity constant, K_D ranged from 2·10⁻⁶ to 2·10⁻⁹ M⁻¹. A novel affinity matrix based on peptide S3Δ was developed for removal of LPS from solutions such as: water; buffers with a wide range of ionic strength and pH; medium for cell culture; and protein solutions under optimized conditions. At a starting LPS of ≈100 EU/ml, a post-purification level below 0.005 EU/ml was achieved.