Ethanol injection method for hydrophilic and lipophilic drug-loaded liposome preparation

In this article, a hydrophobic (beclomethasone dipropionate; BDP) and a hydrophilic (cytarabine; Ara-C) drugs have been encapsulated in liposomes in order to be administered via the pulmonary route. For this aim, a liposome preparation method, which is easy to scale up, the ethanol injection method, has been selected. The effects of critical process and formulation parameters have been investigated. The drug-loaded liposomes were prepared and characterized in terms of size, zeta potential, encapsulation efficiency, release study, cell uptake, and aerodynamic behavior. Small multilamellar vesicles, with sizes ranging from about 80 to 170?nm, were successfully obtained. Results indicated a significant influence of phospholipid and cholesterol amounts on liposome size and encapsulation efficiency. The higher encapsulation efficiencies were about 100% for the hydrophobic drug (BDP) and about 16% for the hydrophilic one (Ara-C). The in vitro release study showed a prolonged release profile for BDP, in contrast with Ara-C, which was released more rapidly. The cell-uptake test revealed that fluorescent liposomes have been well internalized into the cytoplasm of SW-1573 human lung carcinoma cells, confirming the possibility to use liposomes for lung cell targeting. Nebulized Ara-C and BDP liposomes presented aerodynamic diameters compatible with deep lung deposition. In conclusion, the elaborated liposomes seem to be promising carriers for both Ara-C and BDP pulmonary delivery.     

Physicochemical evaluation of a stability-driven approach to drug entrapment in regular and in surface-modified liposomes

The traditional mode of encapsulating drugs in liposomes poses risks to drug stability, especially when recognition agents are attached to the liposomal surface to obtain targeted liposomes. To reduce such risks, we devised a simple, novel method to entrap drugs in liposomes, consisting of (i) preparation and lyophilization of drug-free regular and surface-modified liposomes and (ii) drug encapsulation in the course of liposome reconstitution through rehydration in an aqueous solution of the drug. In this paper, we report physicochemical studies in which we compared regular and surface-modified liposomes made by this novel approach (denoted N-liposomes) to respective liposomes made by the traditional mode (denoted T-liposomes). The studies were performed with fluorescein, sucrose, histidine, mitomycin C (MMC), and chloramphenicol (CAM) encapsulated (each) in regular and in bioadhesive liposomes, the latter having hyaluronic acid as the surface-bound ligand. Our major findings are as follows: (1) The drug-specific encapsulation efficiencies spanning the range of 10-90% were, excepting sucrose, either similar in the N- and T-liposomes or better in the N- than in the T-liposomes, for both regular and bioadhesive liposomes. (2) For all liposome types and methods of preparation, fluorescein, histidine, and MMC did not adsorb to the liposomal surface. Sucrose and MMC did adsorb to the liposomal surface irrespective of the liposome preparation mode, sucrose favoring bioadhesive over regular liposomes and MMC having the opposite trend. (3) For both regular and bioadhesive liposomes, the mechanism of drug efflux from the N-liposomes was found to be governed by a single rate constant, as previously found for the T-liposomes. The magnitudes obtained, ranging from 3.5(+/-0.2) x 10(-3) to 400(+/-17) x 10(-3) h(-1), were always drug specific and occasionally also liposome type (i.e., regular or bioadhesive) specific. For MMC and CAM, the novel approach rendered liposomes with improved sustained release. The results reported here attest, overall, to the potential of this novel approach, meriting further investigations. Studies currently underway with MMC indicate N-liposomes also have functional advantages.     

6-Mercaptopurine and Daunorubicin Double Drug Liposomes—Preparation,Drug-Drug Interaction and Characterization

This article addresses and investigates the dual incorporation of daunorubicin (DR) and 6-mercaptopurine (6-MP) in liposomes for better chemotherapy. These drugs are potential candidates for interaction due to the quinone (H acceptor) and hydroxyl (H donor) groups on DR and 6-MP, respectively. Interactions between the two drugs in solution were monitored by UV/Vis and fluorescence spectroscopy. Interaction between the two drugs inside the liposomes was evaluated by HPLC (for 6-MP) and by fluorescence spectroscopy (for daunorubicin) after phospholipase-mediated liposome lysis. Our results provide evidence for the lack of interaction between the two drugs in solution and in liposomes. The entrapment efficiencies of 6-MP in the neutral Phosphatidyl choline (PC):Cholesterol (Chol):: 2:1 and anionic PC:Chol:Cardiolipin (CL) :: 4:5:1 single and double drug liposomes were found to be 0.4% and 1.5% (on average), respectively. The entrapment efficiencies of DR in the neutral and anionic double drug liposomes were found to be 55% and 31%, respectively. The corresponding entrapment of daunorubicin in the single drug liposomes was found to be 62% on average. Our thin layer chromatography (TLC) and transmission electron microscopy (TEM) results suggest stability of lipid and liposomes, thus pointing plausible existence of double drug liposomes. Cytotoxicity experiments were performed by using both single drug and double drug liposomes. By comparing the results of phase contrast and fluorescence microscopy, it was observed that the double drug liposomes were internalized in the jurkat and Hut78 (highly resistant cell line) leukemia cells as viewed by the fluorescence of daunorubicin. The cytotoxicity was dose dependent and had shown a synergistic effect when double drug liposome was used.     

6-mercaptopurine and daunorubicin double drug liposomes-preparation, drug-drug interaction and characterization

This article addresses and investigates the dual incorporation of daunorubicin (DR) and 6-mercaptopurine (6-MP) in liposomes for better chemotherapy. These drugs are potential candidates for interaction due to the quinone (H acceptor) and hydroxyl (H donor) groups on DR and 6-MP, respectively. Interactions between the two drugs in solution were monitored by UV/Vis and fluorescence spectroscopy. Interaction between the two drugs inside the liposomes was evaluated by HPLC (for 6-MP) and by fluorescence spectroscopy (for daunorubicin) after phospholipase-mediated liposome lysis. Our results provide evidence for the lack of interaction between the two drugs in solution and in liposomes. The entrapment efficiencies of 6-MP in the neutral Phosphatidyl choline (PC):Cholesterol (Chol):: 2:1 and anionic PC:Chol:Cardiolipin (CL) :: 4:5:1 single and double drug liposomes were found to be 0.4% and 1.5% (on average), respectively. The entrapment efficiencies of DR in the neutral and anionic double drug liposomes were found to be 55% and 31%, respectively. The corresponding entrapment of daunorubicin in the single drug liposomes was found to be 62% on average. Our thin layer chromatography (TLC) and transmission electron microscopy (TEM) results suggest stability of lipid and liposomes, thus pointing plausible existence of double drug liposomes. Cytotoxicity experiments were performed by using both single drug and double drug liposomes. By comparing the results of phase contrast and fluorescence microscopy, it was observed that the double drug liposomes were internalized in the jurkat and Hut78 (highly resistant cell line) leukemia cells as viewed by the fluorescence of daunorubicin. The cytotoxicity was dose dependent and had shown a synergistic effect when double drug liposome was used.     

Engineering liposomes of leaf extract of seabuckthorn (SBT) by supercritical carbon dioxide (SCCO2)-mediated process

Seabuckthorn (SBT; Hipphophae rhamnoides) leaf extract obtained by supercritical carbon dioxide (SCCO(2)) using ethanol as an entrainer, containing mainly flavanoids as bioactive principles with antioxidant and antibacterial properties, was used for the preparation of liposomes. Liposomes are promising drug carriers with sustained release because they can enhance the membrane penetration of drugs, deliver the entrapped drugs across cell membranes, and improve extract stability and bioavailability. The aim of the present study was to compare the two different methods of liposome production: the Bangham thin-film method and SCCO(2) gas antisolvent method (SCCO(2) GAS) for the incorporation of SBT leaf extract in terms of particle size, morphology, encapsulation efficiency, antioxidant activity, and thermal stability. Liposomes obtained with the thin-film method were multilamellar vesicles with average particle size (3,740 nm), encapsulation efficiency (14.60%), and particle-size range (1.57-6.0 μm), respectively. On the other hand, liposomes by the SCCO(2) GAS method were nanosized (930 nm) with an improved encapsulation efficiency (28.42%) and narrow range of size distribution (0.48-1.07 μm), respectively. Further, the antioxidant activity of leaf extract of SBT was determined by the 2 diphenyl-1-picrylhydrazyl method and expressed as Trolox equivalents as well as of the intercalated extract in liposomes. The oxidative stability of SBT encapsulated in liposomes was again estimated using differential scanning calorimetry (DSC). Thermal-oxidative decomposition of the samples (i.e., pure liposomes and encapsulated extracts) and the modification of the main transition temperature for the lipid mixture and the splitting of the calorimetric peak in the presence of the antioxidants were also studied by DSC. After encapsulation in liposomes, antioxidant activity proved to be higher than those of the same extracts in pure form.     

Evaluation of tetraether lipid-based liposomal carriers for encapsulation and retention of nucleoside-based drugs

Although liposomal nanoparticles are one of the most versatile class of drug delivery systems, stable liposomal formulation of small neutral drug molecules still constitutes a challenge due to the low drug retention of current lipid membrane technologies. In this study, we evaluate the encapsulation and retention of seven nucleoside analog-based drugs in liposomes made of archaea-inspired tetraether lipids, which are known to enhance packing and membrane robustness compared to conventional bilayer-forming lipids. Liposomes comprised of the pure tetraether lipid generally showed improved retention of drugs (up to 4-fold) compared with liposomes made from a commercially available diacyl lipid. Interestingly, we did not find a significant correlation between the liposomal leakage rates of the molecules with typical parameters used to assess lipophilicity of drugs (such logD or topological polar surface area), suggesting that specific structural elements of the drug molecules can have a dominant effect on leakage from liposomes over general lipophilic character.     

Preclinical Studies with Doxorubicin Encapsulated in Polyethyleneglycol-Coated Liposomes

Abstract

Doxorubicin (DOX) has been encapsulated with high efficiency in the water phase of small-sized lipid vesicles. Plasma-induced drug leakage from these vesicles is minimal when hydrogenated phosphatidylcholine is present as the main component. A prolonged circulation time of liposome-encapsulated DOX is observed in animal models when a small fraction of polyethyleneglycol-derivatized phospholipid (PEG) is present in the liposome bilayer. Using these PEG-coated liposomes, we found that the concentration of DOX in tumor implants of the mouse M-109 carcinoma is significantly enhanced by liposome delivery. The antitumor activity of liposome-encapsulated DOX in a lung metastases model of the M-109 carcinoma is superior to that of free DOX. The minimal lethal dose of DOX to tumor-free mice was substantially increased by encapsulation in PEG-coated liposomes, indicating that toxicity is reduced. We also found that the vesicant of DOX after intradermal injection is prevented by liposome encapsulation. These preclinical observations, suggesting that encapsulation of DOX in PEG-coated liposomes may lead to a significant improvement of the therapeutic index of DOX, have led to the initiation of clinical trials in cancer patients.     

Constant Pressure-controlled Extrusion Method for the Preparation of Nano-sized Lipid Vesicles

Liposomes are artificially prepared vesicles consisting of natural and synthetic phospholipids that are widely used as a cell membrane mimicking platform to study protein-protein and protein-lipid interactions³, monitor drug delivery^4,5, and encapsulation⁴. Phospholipids naturally create curved lipid bilayers, distinguishing itself from a micelle.⁶ Liposomes are traditionally classified by size and number of bilayers, i.e. large unilamellar vesicles (LUVs), small unilamellar vesicles (SUVs) and multilamellar vesicles (MLVs)⁷. In particular, the preparation of homogeneous liposomes of various sizes is important for studying membrane curvature that plays a vital role in cell signaling, endo- and exocytosis, membrane fusion, and protein trafficking⁸. Several groups analyze how proteins are used to modulate processes that involve membrane curvature and thus prepare liposomes of diameters <100 - 400 nm to study their behavior on cell functions³. Others focus on liposome-drug encapsulation, studying liposomes as vehicles to carry and deliver a drug of interest⁹. Drug encapsulation can be achieved as reported during liposome formation⁹. Our extrusion step should not affect the encapsulated drug for two reasons, i.e. (1) drug encapsulation should be achieved prior to this step and (2) liposomes should retain their natural biophysical stability, securely carrying the drug in the aqueous core. These research goals further suggest the need for an optimized method to design stable sub-micron lipid vesicles.Nonetheless, the current liposome preparation technologies (sonication¹⁰, freeze-and-thaw¹⁰, sedimentation) do not allow preparation of liposomes with highly curved surface (i.e. diameter <100 nm) with high consistency and efficiency^10,5, which limits the biophysical studies of an emerging field of membrane curvature sensing. Herein, we present a robust preparation method for a variety of biologically relevant liposomes.Manual extrusion using gas-tight syringes and polycarbonate membranes^10,5 is a common practice but heterogeneity is often observed when using pore sizes <100 nm due to due to variability of manual pressure applied. We employed a constant pressure-controlled extrusion apparatus to prepare synthetic liposomes whose diameters range between 30 and 400 nm. Dynamic light scattering (DLS)¹⁰, electron microscopy¹¹ and nanoparticle tracking analysis (NTA)¹² were used to quantify the liposome sizes as described in our protocol, with commercial polystyrene (PS) beads used as a calibration standard. A near linear correlation was observed between the employed pore sizes and the experimentally determined liposomes, indicating high fidelity of our pressure-controlled liposome preparation method. Further, we have shown that this lipid vesicle preparation method is generally applicable, independent of various liposome sizes. Lastly, we have also demonstrated in a time course study that these prepared liposomes were stable for up to 16 hours. A representative nano-sized liposome preparation protocol is demonstrated below.     

Multifunctional liposomes for nasal delivery of the anti-Alzheimer drug tacrine hydrochloride

The purpose of this study was the development of multifunctional liposomes for nasal administration of tacrine hydrochloride. Liposomes were prepared using traditional excipients (cholesterol and phosphatidylcholine), partly enriched with α-tocopherol and/or Omega3 fatty acids. This approach was chosen in order to obtain at the same time two positive results: an enhanced drug permeation through nasal mucosa and a concomitant neuroprotective effect. Several liposome formulations were prepared using the Reverse Phase Evaporation technique followed by membrane filter extrusion. In particular, liposome capacity to enhance drug permeation was evaluated by means of membrane permeation and cellular uptake studies. Furthermore, liposome effect on neuronal viability and intracellular ROS production was evaluated as well as their cytoprotective effect against oxidative stress. All liposome formulations showed a mean diameter in the range of 175?nm to 219?nm with polydispersity index lower than 0.22, a lightly negative zeta potential and excellent encapsulation efficiency. Moreover, along with good mucoadhesive properties, multifunctional liposomes showed a markedly increase in tacrine permeability, which can be related to liposome fusion with cellular membrane, a hypothesis, which was also supported by cellular uptake studies. Finally, the addition of α-tocopherol without Omega3 fatty acids, was found to increase the neuroprotective activity and antioxidant properties of liposomes.     

Characterization of sterically stabilized cisplatin liposomes by nuclear magnetic resonance

Extensive scientific efforts are directed towards finding new and improved platinum anticancer agents. A promising approach is the encapsulation of cisplatin in sterically stabilized, long circulating, PEGylated 100 nm liposomes. This liposomal cisplatin (STEALTH cisplatin, formerly known as SPI-77) shows excellent stability in plasma and has a longer circulation time, greater efficacy and lower toxicity than much free cisplatin. However, so far, the physicochemical characterization of STEALTH cisplatin has been limited to size distribution, drug-to-lipid ratio and stability. Information on the physical state of the drug in the liposome aqueous phases and the drug's interaction with the liposome membrane has been lacking. This study was aimed at filling this gap. We report a multinuclear NMR study in which several techniques have been used to assess the physical nature of cisplatin in liposomal formulations and if and to what extent the drug affects the liposome phospholipids. Since NMR detects only the soluble cisplatin in the liposomes and not the insoluble drug, combining NMR and atomic absorption data enables one to determine how much of the encapsulated drug is soluble in the intraliposomal aqueous phase. Our results indicate that almost all of the cisplatin remains intact during the loading process, and that the entire liposomal drug is present in a soluble form in the internal aqueous phase of the liposomes.     

Liposomes composed of a double-chain cationic amphiphile (vectamidine) induce their own encapsulation into human erythrocytes

Vectamidine is a liposome-forming double-chain cationic amphiphile. The present work was aimed to microscopically study the interactions of Vectamidine liposomes with the human erythrocyte plasma membrane. Vectamidine rapidly induced stomatocytic shapes. Attachment of Vectamidine liposomes to the erythrocyte induced a strong local invagination of the membrane. This frequently resulted in a complete encapsulation of the liposome. Liposomes composed of phosphatidylcholine (neutral) or phosphatidylserine/phosphatidylcholine (anionic) did not perturb the erythrocyte shape. Our results indicate that besides an attraction of Vectamidine liposomes to the plasma membrane, there is a preference of Vectamidine for the inner bilayer leaflet. We suggest that cationic amphiphiles may transfer from membrane-attached liposomes to the plasma membrane and then translocate to the inner bilayer leaflet where they induce a strong local inward bending of the plasma membrane resulting in an encapsulation of the liposome.     

Dual-targeting for brain-specific liposomes drug delivery system: Synthesis and preliminary evaluation

The treatment of glioma has become a great challenge because of the existence of brain barrier (BB). In order to develop an efficient brain targeting drug delivery system to greatly improve the brain permeability of anti-cancer drugs, a novel brain-targeted glucose-vitamin C (Glu-Vc) derivative was designed and synthesized as liposome ligand for preparing liposome to effectively deliver paclitaxel (PTX). The liposome was prepared and its particle size, zeta potential, encapsulation efficiency, release profile, stability, hemolysis and cytotoxicity were also characterized. What’s more, the cellular uptake of CFPE-labeled Glu-Vc-Lip on GLUT₁- and SVCT₂-overexpressed C6 cells was 4.79-, 1.95-, 4.00- and 1.53-fold higher than that of Lip, Glu-Lip, Vc-Lip and Glu?+?Vc-Lip. Also, the Glu-Vc modified liposomes showed superior targeting ability in vivo evaluation compared with naked paclitaxel, non-coated, singly-modified and co-modified by physical blending liposomes. The relative uptake efficiency was enhanced by 7.53 fold to that of naked paclitaxel, while the concentration efficiency was up to 7.89 times. What’s more, the Glu-Vc modified liposomes also displayed the maximum accumulation of DiD-loaded liposomes at tumor sites with the strongest fluorescence in the brain in vivo imaging. Our results suggest that chemical modification of liposomes with warheads of glucose and vitamin C represents a promising and efficient strategy for the development of brain-specific liposomes drug delivery system by utilizing the endogenous transportation mechanism of the warheads.     

The Experimental Design as Practical Approach to Develop and Optimize a Formulation of Peptide-Loaded Liposomes

To investigate the encapsulation of Print 3G, a peptidic agent that could reduce the angiogenic development of breast tumors, pegylated liposomes used as intravenous vectors were studied and characterized. Recently, the path of liposomes has been explored with success to improve the pharmacological properties of peptidic drugs and to stabilize them. In this study, loaded unilamellar vesicles composed of SPC:CHOL:mPEG2000-DSPE (47:47:6) were prepared by the hydration of lipid film technique. An HPLC method was developed and validated for the determination of Print 3G to calculate its encapsulation efficiency. Observed Print 3G adsorption on different materials employed during liposome preparation (such as glass beads, tubing, and connections for extrusion) led to the modification of the manufacturing method. The freeze-thawing technique was used to enhance the amount of Print 3G encapsulated into blank liposomes prepared using the hydration of lipid film procedure. Many factors may influence peptide entrapment, namely the number of freeze-thawing cycles, the lipid concentration, the peptide concentration, and the mixing time. Consequently, a design of experiments was performed to obtain the best encapsulation efficiency while minimizing the number of experiments. The lipid concentration and the number of freeze-thawing cycles were identified as the positive factors influencing the encapsulation. As a result of the optimization, an optimum was found and encapsulation efficiencies were improved from around 30% to 63%. Liposome integrity was evaluated by photon correlation spectroscopy and freeze-fracture electron microscopy to ensure that the selected formulation possesses the required properties to be a potential candidate for further in vitro and in vivo experiments.     

Supramolecular organization of S12363-liposomes prepared with two different remote loading processes

The S12363 anticancer drug was encapsulated into liposomes in an attempt to increase its therapeutic index. Loading of S12363 was achieved using two different processes based on the formation of either a pH gradient or an ammonium gradient between the acidic inner liposomal compartment and the basic outer phase. High encapsulation yields (> 90%) were obtained using both processes for sphingomyelin/cholesterol/cholesterol-PEG vesicles. Spectrofluorimetry measurements have shown that liposomes were characterized by an internal pH around 4 for both loading processes. This internal pH was stable over a period of at least 20 days. Differential scanning calorimetry coupled with time-resolved synchrotron X-ray diffraction was used to study the drug/carrier supramolecular organization. In ammonium sulfate, S12363 was inserted into the bilayer in the vicinity of the polar headgroup. In citrate buffer, S12363 was mainly adsorbed at the water-lipid interface. The drug partitioning into the membrane was inhomogeneous and led to the formation of drug-rich and drug-poor domains. This effect was enhanced in the presence of cholesterol, especially in ammonium sulfate. To conclude, for both processes, the encapsulated drug was found inside the liposome aqueous core but strongly interacting with the membrane.     

Novel vaginal drug delivery system: deformable propylene glycol liposomes-in-hydrogel

Deformable propylene glycol-containing liposomes (DPGLs) incorporating metronidazole or clotrimazole were prepared and evaluated as an efficient drug delivery system to improve the treatment of vaginal microbial infections. The liposome formulations were optimized based on sufficient trapping efficiencies for both drugs and membrane elasticity as a prerequisite for successful permeability and therapy. An appropriate viscosity for vaginal administration was achieved by incorporating the liposomes into Carbopol hydrogel. DPGLs were able to penetrate through the hydrogel network more rapidly than conventional liposomes. In vitro studies of drug release from the liposomal hydrogel under conditions simulating human treatment confirmed sustained and diffusion-based drug release. Characterization of the rheological and textural properties of the DPGL-containing liposomal hydrogels demonstrated that the incorporation of DPGLs alone had no significant influence on mechanical properties of hydrogels compared to controls. These results support the great potential of DPGL-in-hydrogel as an efficient delivery system for the controlled and sustained release of antimicrobial drugs in the vagina.     

Construction of stable anionic liposome-plasmid particles using the heating method: a preliminary investigation

Recent advances in liposome technology have resulted in the production of effective drug delivery formulations, although toxicity concerns remain. In order to overcome this problem we prepared anionic liposomes without using any volatile organic solvent or detergent. Liposomes prepared by this heating method (HM-liposomes) were characterised in terms of morphology, stability and DNA incorporation efficiency. Scanning tunnelling microscopy (STM) and optical microscopy were used to study the morphological characteristics and size distribution of HM-liposomes. Microscopic studies revealed formation of spherical bilayered structures with stabilities of at least eight months and also enabled measuring the diameter and the bilayer thickness of the vesicles. Plasmid DNA encapsulation efficiencies of up to 70.3% were determined for HM-liposomes.     

Pros and Cons of the Liposome Platform in Cancer Drug Targeting

Coating of liposomes with polyethylene-glycol (PEG) by incorporation in the liposome bilayer of PEG-derivatized lipids results in inhibition of liposome uptake by the reticulo-endothelial system and significant prolongation of liposome residence time in the blood stream. Parallel developments in drug loading technology have improved the efficiency and stability of drug entrapment in liposomes, particularly with regard to cationic amphiphiles such as anthracyclines. An example of this new generation of liposomes is a formulation of pegylated liposomal doxorubicin known as Doxil® or Caelyx®, whose clinical pharmacokinetic profile is characterized by slow plasma clearance and small volume of distribution. A hallmark of these long-circulating liposomal drug carriers is their enhanced accumulation in tumors. The mechanism underlying this passive targeting effect is the phenomenon known as enhanced permeability and retention (EPR) which has been described in a broad variety of experimental tumor types. Further to the passive targeting effect, the liposome drug delivery platform offers the possibility of grafting tumor-specific ligands on the liposome membrane for active targeting to tumor cells, and potentially intracellular drug delivery. The pros and cons of the liposome platform in cancer targeting are discussed vis-à-vis nontargeted drugs, using as an example a liposome drug delivery system targeted to the folate receptor.     

Pros and cons of the liposome platform in cancer drug targeting

Coating of liposomes with polyethylene-glycol (PEG) by incorporation in the liposome bilayer of PEG-derivatized lipids results in inhibition of liposome uptake by the reticulo-endothelial system and significant prolongation of liposome residence time in the blood stream. Parallel developments in drug loading technology have improved the efficiency and stability of drug entrapment in liposomes, particularly with regard to cationic amphiphiles such as anthracyclines. An example of this new generation of liposomes is a formulation of pegylated liposomal doxorubicin known as Doxil or Caelyx, whose clinical pharmacokinetic profile is characterized by slow plasma clearance and small volume of distribution. A hallmark of these long-circulating liposomal drug carriers is their enhanced accumulation in tumors. The mechanism underlying this passive targeting effect is the phenomenon known as enhanced permeability and retention (EPR) which has been described in a broad variety of experimental tumor types. Further to the passive targeting effect, the liposome drug delivery platform offers the possibility of grafting tumor-specific ligands on the liposome membrane for active targeting to tumor cells, and potentially intracellular drug delivery. The pros and cons of the liposome platform in cancer targeting are discussed vis-à-vis nontargeted drugs, using as an example a liposome drug delivery system targeted to the folate receptor.     

Preparation of submicron liposomes exhibiting efficient entrapment of drugs by freeze-drying water-in-oil emulsions

A novel liposome preparation method is described as freeze-drying of water-in-oil emulsions containing sucrose in the aqueous phase (W) and phospholipids and poly(ethylene glycol)₁₅₀₀ (PEG) in the oil phase (O). The water-in-oil emulsions were prepared by sonication and then lyophilized to obtain dry products. Upon rehydration, the dry products formed liposomes with a size smaller than 200 nm and an encapsulation efficiency (EE) higher than 60% for model drugs. The presence of lyoprotectant and PEG was found to be a prerequisite for the formation of liposomes with desirable properties, such as a small particle size and high EE. The lyophilates were stable and could be rehydrated to form liposomes without any change in size or EE even after a storage period of 6 months. Also, the lipophilic drug-containing FWE liposomes were stable and could be stored for at least 6 months although the liposomes containing hydrophilic drugs showed significant leakage. Based on the vesicle size and EEs of the model drugs, as well as the scanning electron micrograph (SEM) and small angle X-ray scattering (SAXS) pattern of the lyophilates, a possible mechanism for the liposome formation is proposed.