High-resolution analysis of neuronal growth cone morphology by comparative atomic force and optical microscopy

Neuronal growth cones are motile sensory structures at the tip of axons, transducing guidance information into directional movements towards target cells. The morphology and dynamics of neuronal growth cones have been well characterized with optical techniques; however, very little quantitative information is available on the three-dimensional structure and mechanical properties of distinct subregions. In the present study, we imaged the large Aplysia growth cones after chemical fixation with the atomic force microscope (AFM) and directly compared our data with images acquired by light microscopy methods. Constant force imaging in contact mode in combination with force-distant measurements revealed an average height of 200 nm for the peripheral (P) domain, 800 nm for the transition (T) zone, and 1200 nm for the central (C) domain, respectively. The AFM images show that the filopodial F-actin bundles are stiffer than surrounding F-actin networks. Enlarged filopodia tips are 60 nm higher than the corresponding shafts. Measurements of the mechanical properties of the specific growth cone regions with the AFM revealed that the T zone is stiffer than the P and the C domain. Direct comparison of AFM and optical data acquired by differential interference contrast and fluorescence microscopy revealed a good correlation between these imaging methods. However, the AFM provides height and volume information at higher resolution than fluorescence methods frequently used to estimate the volume of cellular compartments. These findings suggest that AFM measurements on live growth cones will provide a quantitative understanding of how proteins can move between different growth cone regions.     

High‐resolution analysis of neuronal growth cone morphology by comparative atomic force and optical microscopy

Neuronal growth cones are motile sensory structures at the tip of axons, transducing guidance information into directional movements towards target cells. The morphology and dynamics of neuronal growth cones have been well characterized with optical techniques; however, very little quantitative information is available on the three‐dimensional structure and mechanical properties of distinct subregions. In the present study, we imaged the large Aplysia growth cones after chemical fixation with the atomic force microscope (AFM) and directly compared our data with images acquired by light microscopy methods. Constant force imaging in contact mode in combination with force‐distant measurements revealed an average height of 200 nm for the peripheral (P) domain, 800 nm for the transition (T) zone, and 1200 nm for the central (C) domain, respectively. The AFM images show that the filopodial F‐actin bundles are stiffer than surrounding F‐actin networks. Enlarged filopodia tips are 60 nm higher than the corresponding shafts. Measurements of the mechanical properties of the specific growth cone regions with the AFM revealed that the T zone is stiffer than the P and the C domain. Direct comparison of AFM and optical data acquired by differential interference contrast and fluorescence microscopy revealed a good correlation between these imaging methods. However, the AFM provides height and volume information at higher resolution than fluorescence methods frequently used to estimate the volume of cellular compartments. These findings suggest that AFM measurements on live growth cones will provide a quantitative understanding of how proteins can move between different growth cone regions. © 2006 Wiley Periodicals, Inc. J Neurobiol, 2006     

Use of molecular dynamics simulation in interpreting the atomic force microscopy data

A new approach to interpreting and refining the atomic force microscopy (AFM) data, based on comparing them with the output of computer-simulated probe scanning, has been tested with lysozyme. Distinct AFM images were obtained experimentally for individual lysozyme monomers adsorbed from a clear aqueous solution onto a mica wafer. Two steps of simulations were performed to reproduce the environment and processes in the AFM experiment. First, we used the molecular dynamics software (NAMD) to model the structure of lysozyme adsorbed from a water solution onto a silicon oxide support (the latter was modeled manually according to its crystal structure). Second, we applied molecular mechanics to reproduce probe tip interactions with the object. As a result, we have obtained the lysozyme surface height as a function of horizontal coordinates. Comparison with the real AFM data gave a fair fit in the shape of lysozyme molecules but a significant difference in size. Analysis of the possible causes of this discrepancy indicated that more detailed simulations of AFM imaging with fuller account of the experimental conditions are needed to reach a better correspondence. The first results of testing our approach provide sufficient information for improving the accuracy in further applications.     

Native polysomes of Saccharomyces cerevisiae in liquid solution observed by atomic force microscopy

The native polysomes of Saccharomyces cerevisiae were visualized in liquid solution by atomic force microscopy without external contrasting, such as shadowing and negative staining. This study showed native polysomes as lined particle with a height of ca. 27 nm, which is agreement with the height of 80S ribosomes in previous study. We found a small subparticle, located in a ring-shape or at the end of a linear structure, and visualized mRNA chains between adjacent ribosomes. Although the structures of polysomes have been studied for decades, it has remained difficult to visualize the native three-dimensional form. By the observation in liquid solution, we temporarily stopped the translation using an antibiotic to presenting the native three-dimensional structure and function of the polysomes. Our results provide not only new findings on native eukaryotic polysomes, but also great potential to visualize the influence of various environmental conditions on polysomes.     

Imaging of human metaphase chromosomes by atomic force microscopy in liquid

Human metaphase chromosomes were observed using an intermittent contact mode of atomic force microscopy (AFM) in a phosphate-buffered saline solution to clarify their conformation close to that in the physiological state. In the AFM images in liquid, symmetric alternating ridges and grooves were evident on their surface of the paired sister chromatids. The number of the ridges and grooves were rather specific to the type of the chromosome. The structural changes of chromosomes caused by trypsin treatment were also directly observable using AFM in liquid. These results suggest that the intermittent contact mode AFM is useful not only for analyzing the structure of chromosomes in a liquid condition but also for studying the effect of chemical treatments on chromosomes in relation to their structural changes.     

Atomic force microscope visualization of lipid bilayer degradation due to action of phospholipase A2 and Humicola lanuginosa lipase

An important application of liquid cell Atomic Force Microscopy (AFM) is the study of enzyme structure and behaviour in organized molecular media that mimic in-vivo systems. In this study we demonstrate the use of AFM as a tool to study the kinetics of lipolytic enzyme reactions occurring at the surface of a supported lipid bilayer. In particular, the time course of the degradation of lipid bilayers by Phospholipase A₂ (PLA₂) and Humicola Lanuginosa Lipase (HLL) has been investigated. Contact mode imaging allows visualization of enzyme activity on the substrate with high lateral resolution. Lipid bilayers were prepared by the Langmuir-Blodgett technique and transferred to an AFM liquid cell. Following injection of the enzyme into the liquid cell, a sequence of images was acquired at regular time intervals to allow the identification of substrate structure, preferred sites of enzyme activation, and enzyme reaction rates.     

Direct observation of protein secondary structure in gas vesicles by atomic force microscopy.

The protein that forms the gas vesicle in the cyanobacterium Anabaena flos-aquae has been imaged by atomic force microscopy (AFM) under liquid at room temperature. The protein constitutes "ribs" which, stacked together, form the hollow cylindrical tube and conical end caps of the gas vesicle. By operating the microscope in deflection mode, it has been possible to achieve sub-nanometer resolution of the rib structure. The lateral spacing of the ribs was found to be 4.6 +/- 0.1 nm. At higher resolution the ribs are observed to consist of pairs of lines at an angle of approximately 55 degrees to the rib axis, with a repeat distance between each line of 0.57 +/- 0.05 nm along the rib axis. These observed dimensions and periodicities are consistent with those determined from previous x-ray diffraction studies, indicating that the protein is arranged in beta-chains crossing the rib at an angle of 55 degrees to the rib axis. The AFM results confirm the x-ray data and represent the first direct images of a beta-sheet protein secondary structure using this technique. The orientation of the GvpA protein component of the structure and the extent of this protein across the ribs have been established for the first time.     

Atomic force microscopy of the myosin molecule.

Atomic force microscopy (AFM) has been used to study the structure of rabbit skeletal muscle myosin deposited onto a mica substrate from glycerol solution. Images of the myosin molecule have been obtained using contact mode AFM with the sample immersed in propanol. The molecules have two heads at one end of a long tail and have an appearance similar to those prepared by glycerol deposition techniques for electron microscopy, except that the separation of the two heads is not so well defined. The average length of the tail (155 +/- 5 nm) agrees well with previous studies. Bends in the myosin tail have been observed at locations similar to those observed in the electron microscope. By raising the applied force, it has been possible locally to separate the two strands of the alpha-helical coiled-coil tail. We conclude that the glycerol-mica technique is a useful tool for the preparation of fibrous proteins for examination by scanning probe microscopy.     

Visual representation by atomic force microscopy (AFM) of tomato spotted wilt virus ribonucleoproteins.

Atomic force microscopy (AFM) allows the observation of biological material without fixation procedures. Here we present AFM images of ribonucleoproteins (nucleocapsids) derived from a plant infecting RNA virus (tomato spotted wilt virus, TSWV), which have been recorded in contact mode. The nucleocapsids, prepared from systemically infected leaves of tobacco, were spreaded on a glass surface and dried in air, and appeared as regularly formed rings, resembling the proposed pseudocircular and panhandle structure of encapsidated genomic RNA. Average values between 1300 and 2200 nm of nucleocapsid lengths could be related to dimensions estimated by electron microscopy, thereby validating a filamentous configuration of the TSWV ribonucleoproteins. However, to our knowledge regular, ring-like forms of ribonucleoproteins have not been obtained by electron microscopy, which rather showed an amorphous structure of the virus particles. Hence, the AFM approach provides a starting point for further detailed studies on TSWV ribonucleoprotein complexes.     

Phase imaging of moving DNA molecules and DNA molecules replicated in the atomic force microscope.

Phase imaging with a tapping mode atomic force microscope (AFM) has many advantages for imaging moving DNA and DNA-enzyme complexes in aqueous buffers at molecular resolution. In phase images molecules can be resolved at higher scan rates and lower forces than in height images from the AFM. Higher scan rates make it possible to image faster processes. At lower forces the molecules are imaged more gently. Moving DNA molecules are also resolved more clearly in phase images than in height images. Phase images in tapping mode AFM show the phase difference between oscillation of the piezoelectric crystal that drives the cantilever and oscillation of the cantilever as it interacts with the sample surface. Phase images presented here show moving DNA molecules that have been replicated with Sequenase in the AFM and DNA molecules tethered in complexes with Escherichia coli RNA polymerase.     

Highly compact folding of chromatin induced by cellular cation concentrations. Evidence from atomic force microscopy studies in aqueous solution

We have performed a very extensive investigation of chromatin folding in different buffers over a wide range of ionic conditions similar to those found in eukaryotic cells. Our results show that in the presence of physiological concentrations of monovalent cations and/or low concentrations of divalent cations, small chicken erythrocyte chromatin fragments and chromatin from HeLa cells observed by transmission electron microscopy (TEM) show a compact folding, forming circular bodies of approximately 35 nm in diameter that were found previously in our laboratory in studies performed under very limited conditions. Since TEM images are obtained with dehydrated samples, we have performed atomic force microscopy (AFM) experiments to analyze chromatin structure in the presence of solutions containing different cation concentrations. The highly compact circular structures (in which individual nucleosomes are not visible as separated units) produced by small chromatin fragments in interphase ionic conditions observed by AFM are equivalent to the structures observed by TEM with chromatin samples prepared under the same ionic conditions. We have also carried out experiments of sedimentation and trypsin digestion of chromatin fragments; the results obtained confirm our AFM observations. Our results suggest that the compaction of bulk interphase chromatin in solution at room temperature is considerably higher than that generally considered in current literature. The dense chromatin folding observed in this study is consistent with the requirement of compact chromatin structures as starting elements for the building of metaphase chromosomes, but poses a difficult physical problem for gene expression during interphase.     

Viscoelasticity of living cells allows high resolution imaging by tapping mode atomic force microscopy.

Application of atomic force microscopy (AFM) to biological objects and processes under physiological conditions has been hampered so far by the deformation and destruction of the soft biological materials invoked. Here we describe a new mode of operation in which the standard V-shaped silicon nitride cantilever is oscillated under liquid and damped by the interaction between AFM tip and sample surface. Because of the viscoelastic behavior of the cellular surface, cells effectively "harden" under such a tapping motion at high frequencies and become less susceptible to deformation. Images obtained in this way primarily reveal the surface structure of the cell. It is now possible to study physiological processes, such as cell growth, with a minimal level of perturbation and high spatial resolution (approximately 20 nm).     

Measurement of dimensions of pentagonal doughnut-shaped C-reactive protein using an atomic force microscope and a dual polarisation interferometric biosensor

In order to develop the C-reactive protein (CRP) sensor chips for clinical detection of atherosclerosis and coronary heart disease, we used an atomic force microscope (AFM) and a dual polarization interferometric (DPI) biosensor to probe the surface ultrastructure and to measure the dimensions of CRP. A single pentagonal structure was directly visualized by AFM, and quantitative measurements of the dimensions of the protein were provided. The average height calculated for each pentagonal CRP particle was approximately 3.03+/-0.37 nm, which basically corresponds to that (36 A in protomer diameter) previously obtained from the structure of CRP determined by X-ray crystallography. Moreover, a experiment using dual polarization interferometric (DPI) as a biosensor was then performed, and the average monolayer thickness value (3.18+/-0.43 nm) that was calculated basically corresponds to that obtained from the experimental value (3.03+/-0.37 nm) of the height measured by an AFM method for CRP. Further investigations will be performed to study the surface ultrastructure of a single pentagonal CRP molecule, and for this purpose a CRP sample (at low concentration) was scanned in vacuum by AFM. The higher-resolution images clearly revealed the presence of doughnut-shaped CRP molecules. In addition, phase images of CRP molecules were captured simultaneously with their height images, and the lateral dimensions of the doughnut-shaped CRP molecules were then measured. It was found that the average values calculated for the outer diameter (11.13+/-1.47 nm) and pore diameter (3.52+/-0.42 nm) are respectively close to those (102 A in outer diameter and 30 A in pore diameter) previously obtained from the structure of CRP determined by X-ray crystallography. This study represents the first direct characterization of the surface ultrastructure and dimensional measurement of the CRP molecule on the sensor chip.     

DNA structure and dynamics

This review primarily outlines the most recent atomic force microscopy (AFM) studies of DNA structure and dynamics. Sample preparation techniques allowing reliable and reproducible imaging of various DNA topologies are reviewed. Such important issues as imaging of supercoiled DNA conformations at different ionic conditions and detection of local alternative structures that are stabilized by negative DNA supercoiling are discussed in length in the article. The possibility of imaging DNA structural dynamics at different levels is another major focus of the article. Using time-lapse AFM imaging mode of nondried samples, such extensive DNA dynamic processes as transition of one local structure into another (H-DNA to B-form transition), the conformational transitions of DNA Holliday junctions and their branch migration were observed. Potential future applications of this single-molecule dynamics mode of AFM to analyses of various biochemical processes involving DNA are discussed.     

The nanometer-scale structure of amyloid-Β visualized by atomic force microscopy

Amyloid-Β (AΒ) is the major protein component of neuritic plaques found in Alzheimer's disease. Evidence suggests that the physical aggregation state of AΒ directly influences neurotoxicity and specific cellular biochemical events. Atomic force microscopy (AFM) is used to investigate the three-dimensional structure of aggregated AΒ and characterize aggregate/fibril size, structure, and distribution. Aggregates are characterized by fibril length and packing densities. The packing densities correspond to the differential thickness of fiber aggregates along az axis (fiber height above thex-y imaging surface). Densely packed aggregates (≥100 nm thick) were observed. At the edges of these densely packed regions and in dispersed regions, three types of AΒ fibrils were observed. These were classified by fibril thickness into three size ranges: 2–3 nm thick, 4–6 nm thick, and 8–12 nm thick. Some of the two thicker classes of fibrils exhibited pronounced axial periodicity. Substructural features observed included fibril branching or annealing and a height periodicity which varied with fibril thickness. When identical samples were visualized with AFM and electron microscopy (EM) the thicker fibrils (4–6 nm and 8–12 nm thick) had similar morphology. In comparison, the densely packed regions of ～≥100 nm thickness observed by AFM were difficult to resolve by EM. The small, 2- to 3-nm-thick, fibrils were not observed by EM even though they were routinely imaged by AFM. These studies demonstrate that AFM imaging of AΒ fibrils can, for the first time, resolve nanometer-scale,z-axis, surface-height (thickness) fibril features. Concurrentx-y surface scans of fibrils reveal the surface submicrometer structure and organization of aggregated AΒ. Thus, when AFM imaging of AΒ is combined with, and correlated to, careful studies of cellular AΒ toxicity it may be possible to relate certain AΒ structural features to cellular neurotoxicity.     

Structural studies of a crystalline insulin analog complex with protamine by atomic force microscopy

Crystallographic studies of insulin-protamine complexes, such as neutral protamine Hagedorn (NPH) insulin, have been hampered by high crystal solvent content, small crystal dimensions, and extensive disorder in the protamine molecules. We report herein in situ tapping mode atomic force microscopy (TMAFM) studies of crystalline neutral protamine Lys(B28)Pro(B29) (NPL), a complex of Lys(B28)Pro(B29) insulin, in which the C-terminal prolyl and lysyl residues of human insulin are inverted, and protamine that is used as an intermediate time-action therapy for treating insulin-dependent diabetes. Tapping mode AFM performed at 6 degrees C on bipyramidally tipped tetragonal rod-shaped NPL crystals revealed large micron-sized islands separated by 44-A tall steps. Lattice images obtained by in situ TMAFM phase and height imaging on these islands were consistent with the arrangement of individual insulin-protamine complexes on the P4(1)2(1)2 (110) crystal plane of NPH, based on a low-resolution x-ray diffraction structure of NPH, arguing that the NPH and NPL insulins are isostructural. Superposition of the height and phase images indicated that tip-sample adhesion was larger in the interstices between NPL complexes in the (110) crystal plane than over the individual complexes. These results demonstrate the utility of low-temperature TMAFM height and phase imaging for the structural characterization of biomolecular complexes.     

AFM studies on gelation mechanism of xanthan gum hydrogels

The effect of annealing on xanthan gum molecules was investigated using atomic force microscopy (AFM). The values of height and width of xanthan gum molecules in AFM images are ca. 1 nm, which strongly indicates that xanthan gum molecules extended on the mica surface are in mono- or double layers. When xanthan gum aqueous solution was annealed, a network structure was observed. In contrast, a network structure was not observed for non-annealed solution. AFM images provide direct information concerning oscillational change of the network structure. It is concluded that xanthan gum molecular chains in aqueous solution aggregate and dissociate in an oscillational manner with increasing annealing time and that a homogeneous network structure was formed by annealing at 40 °C for 24 h.     

Sample preparation and imaging of erythrocyte cytoskeleton with the atomic force microscopy

A novel method for the covalent attachment of erythrocytes to glass microscope coverslips that can be used to image intact cells and the cytoplasmic side of the cell membrane with either solid or liquid mode atomic force microscopy (AFM) is described. The strong binding of cells to the glass surface is achieved by the interaction of cell membrane carbohydrates to lectin, which is bound to N-5-azido-2-nitrobenzoyloxysuccinimide (ANBNOS)-coated coverslips (1). The effectiveness of this method is compared with the other commonly used methods of immobilizing intact erythrocytes on glass coverslips for AFM observations. Experimental conditions of AFM imaging of biologic tissue are discussed, and typical topographies of the extracellular and the cytoplasmic surfaces of the plasma membrane in the dry state and in the liquid state are presented. Comparison of the spectrin network of cell age-separated erythrocytes has demonstrated significant loss in the network order in older erythrocytes. The changes are quantitatively described using the pixel height histogram and window size grain analysis.     

Structural analysis of heavy ion radiation-induced chromosome aberrations by atomic force microscopy

Heavy ion radiation (high linear energy transfer, LET, radiation) induces various types of chromosome aberration. In this report, we describe a new method employing an atomic force microscope (AFM) for nanometer-level structural analysis of chromosome damage induced by heavy ion irradiation. Metaphase mouse chromosomes with chromatid gap or chromatid breaks induced by heavy ion irradiation were marked under a light microscope. Then the detailed structure of chromosomes of Giemsa-stained or unstained samples was visualized by the AFM. The height data of chromosomes obtained by AFM provided useful information to distinguish chromatid gaps and breaks. A fibrous structure was observed on the unstained chromosome, the average width of which was about 45.8 nm in the image of AFM. These structures were considered to be 30-nm fibers on the chromosome. The structure of the break point regions induced by neon- or carbon-ion irradiation was imaged by AFM. In some cases, the fibrous structure of break points was detected by AFM imaging after carbon ion irradiation. These observations indicated that AFM is a useful tool for analysis of chromosome aberrations induced by heavy ion radiation.     

Visualisation of cyanobacteria in aqueous solution by atomic force microscopy

Methodical approaches for studying of living cells in aqueous solutions by atomic force microscopy (AFM) are demonstrated. Images of intact cyanobacteria Synechocystis PCC 6803 in TES buffer were captured in tapping mode using aminomodified mica as AFM substrate. Modification of freshly cleaved mica has been done in 3-aminopropyltri-ethoxysilane vapours. The average size of cyanobacteria was determined from AFM images. The linear size of Synechocystis PCC 6803 in TES buffer was equal to 70 x 90 nm and their height was about 20 nm. Possible causes of insufficiently high resolution of the cyanobacteria AFM images in aqueous solutions and possible ways for gaining molecular resolution in studies of structural, functional and micromechanical properties of living cells are discussed.