A specific stain for the detection of nonheme iron proteins in polyacrylamide gels.

Nonheme iron proteins can be visualized as blue bands in native polyacrylamide gels using a staining method that is both simple and rapid. The reaction of potassium ferricyanide with protein-bound iron atoms to form royal blue complexes occurs almost instantaneously and is sensitive enough to detect 1 microgram of analytical-grade ferritin and 2 micrograms of purified ferredoxin from cyanobacteria. No special treatment of reagents or apparatus was necessary. On comparison, this stain was found to be more specific than the Ferene S stain, not detecting bovine serum albumin even when present as a hundredfold excess over ferritin. The method was found to be effective for isoelectric focusing gels as well.     

Alcian blue as a protein stain for sodium alkyl sulfate-polyacrylamide gels: Application to analysis of polypeptide components of the human platelet

The cationic dye, Alcian blue, previously used as a glycoprotein-specific stain on cellulose acetate and polyacrylamide gels, was found to be capable of staining a variety of purified proteins and each of the components of the human platelet presently identifiable with Coomassie blue R or periodic acid-Schiff (PAS) reagent in sodium alkyl sulfate-polyacrylamide gel electrophoretic preparations. Evidence was obtained to indicate that staining of detergent-protein complexes by Alcian blue occurs by virtue of the affinity of the stain for accessible sulfate groups of detergent molecules, especially sodium tetradecyl sulfate, hydrophobically associated with polypeptide chains. Thus, Alcian blue fails to stain nonglycosylated proteins when pure sodium dodecyl sulfate (C₁₂) is used as the detergent, but does so readily when small quantities of sodium tetradecyl sulfate are also present. The advantages of using Alcian blue to determine platelet protein composition and to make quantitative comparisons between bands in sodium alkyl sulfate gels are discussed.     

Protein transfer from fixed, stained, and dried polyacrylamide gels and immunoblot with protein A-gold

The method of electrophoretically transferring proteins from fixed and stained polyacrylamide gels onto nitrocellulose paper has been reevaluated. It is shown that the tedious destaining of gels is not necessary because Coomassie brilliant blue, although it binds tenaciously to nitrocellulose paper, does not reduce the transfer efficiency of proteins. However, its presence impairs the visibility of proteins as detected, for instance, by the immunogold technique. Therefore, a rapid method for the complete removal of the stain from the nitrocellulose paper after completion of the immunogold procedure was developed. Furthermore, it is shown that proteins from dried polyacrylamide gels can still be transferred onto nitrocellulose sheets with an efficiency of approximately 50% compared to proteins transferred from fixed gels.     

Staining protein in isoelectric focusing gels with fast green

A rapid, simple technique for staining proteins in isoelectric focusing polyacrylamide gels was demonstrated using fast green in 10% acetic acid. Fast green has the distinct advantage of not binding to ampholytes, thus staining only protein. Maximum staining was achieved within 5 min, and bands were visible after 3 to 6 h of destaining. Background stain removal, however, was not complete until 72 h after placing gels in a diffusion destainer. Gel quantitation was demonstrated with actin using fast green and Coomassie brilliant blue R-250. A standard curve prepared with fast green was linear from 0.5 to 8 μg of actin in contrast to Coomassie brilliant blue R-250 which provided linearity from 0.1 to 2.5 μg actin. Application of fast green staining to quantitation of α-actin from cultured muscle satellite cells has been demonstrated.     

Localization of lipoprotein unesterified cholesterol in nondenaturing gradient gels with filipin

A method is described for the staining of lipoprotein unesterified cholesterol in nondenaturing polyacrylamide gradient gels with the fluorescent polyene antibiotic, filipin. The sensitivity of the filipin stain was comparable to that of oil red O and Coomassie R250 in terms of the amount of lipoprotein applied. Filipin successfully stained discoidal complexes of apoA-I-phosphatidylcholine-cholesterol, which in turn were stained poorly with oil red O. The potential for the identification of unesterified cholesterol-enriched lipoprotein subclasses was demonstrated.     

A fluorescent natural product for ultra sensitive detection of proteins in one-dimensional and two-dimensional gel electrophoresis

Lightning Fast is a sensitive fluorescence-based stain for detecting proteins in one-dimensional and two-dimensional polyacrylamide electrophoresis gels. It contains the fluorophore epicocconone from the fungus Epicoccum nigrum that interacts noncovalently with sodium dodecyl sulfate and protein. Stained proteins can be excited optimally by near-ultraviolet light of about 395 nm or with visible light of about 520 nm. The stain can be excited using a range of sources used in image analysis systems including UVA (ca. 365 nm) and UVB (ca. 302 nm) transilluminators; Xenon-arc lamps; 488 nm and 457 nm Argon-ion lasers; 473 nm and 532 nm neodymium: yttrium aluminum garnet (Nd:YAG) solid-state lasers; 543 nm helium-neon lasers, and emerging violet, blue and green diode lasers. Maximum fluorescence emission of the dye is at approximately 610 nm. The limit of detection in one-dimensional gels stained with Lightning Fast protein gel stain is less than 100 pg of protein, rivaling the current limits of matrix-assisted laser desorption/ionization-mass spectrometry (MALDI-MS). Lightning Fast was found to be considerably more sensitive than SYPRO Ruby, SYPRO Orange, silver and Coomassie Brilliant Blue G-250 in matched experiments. Staining takes as little as 3.5 h and stained proteins displayed quantitative linearity over more than four orders of magnitude, thereby allowing visualization of entire proteomes. Lightning Fast protein gel staining is compatible with subsequent peptide mass fingerprinting using MALDI-MS and Edman-based sequencing chemistry.     

A simplified ultrasensitive silver stain for detecting proteins in polyacrylamide gels

We have simplified the highly sensitive silver stain of R. C. Switzer III, C. R. Merril, and S. Shifrin (1979, Anal. Biochem.98, 231–237) for visualizing proteins in polyacrylamide gels. We have reduced the number of steps in the procedure from 10 to 6, simplified the reagents in each step, and reduced the amount of silver required by a factor of 10, thus greatly reducing the expense of the procedure. In common with the original silver stain, our procedure is 100 times more sensitive than Coomassie brilliant blue and is comparable in sensitivity to radioautography of radioactively labeled proteins.     

Specific indication of hemoproteins in polyacrylamide gels using a double-staining process

Hemoproteins were revealed in polyacrylamide gels in the presence of sodium dodecyl sulfate by staining with different benzidine derivatives. When the protein samples were treated with either beta-mercaptoethanol or dithiothreitol, a significant decrease in peroxidase activity of the proteins possessing noncovalently bound heme led to diminished staining. However, when Coomassie blue R-250 staining followed the hemespecific stain it was observed that the hemoprotein bands stained more intensely than duplicate sample bands that had been stained only with the Coomassie blue R-250. This staining property allows the indication of hemoproteins in gels even after the peroxidase yield has been significantly depleted by reducing agents.     

微量蛋白检测中不同银染方法的比较与分析

随着生物化学技术的不断发展,作为检测SDS-聚丙烯酰胺凝胶电泳(SDS-PAGE)中微量蛋白的银染方法也在不断改进和发展.采用4种不同的银染方法检测不同含量的牛血清白蛋白,结果显示单纯的银染过程中如果使用戊二醛固定会使蛋白检出更快速灵敏,而结合考马斯亮蓝的复合银染则较单纯银染灵敏度提高了5～7个数量级.     

Quantitative determination of Coomassie R bound to proteins in polyacrylamide gel. A facilitated method for multi-spot analysis of electrograms

Dimethylsulfoxide (DMSO) was found to be an efficient solvent for extraction of Coomassie Blue R 250 (Coomassie R) from stained proteins on polyacrylamide gels. Kinetic measurements show that the extraction of the dye from a 2-D gel reached equilibrium in 48 h. Staining of E. coli ribosomal proteins by Coomassie R dissolved in trichloroacetic acid exhibited two types of dye-protein complexes, the majority of them yield a blue-purple colour, while the rest are stained with a light-blue tone and fluorescent appearance as well. The absorbance spectra of the complexes in the gel matrix differ significantly from each other. However, the DMSO-extracted Coomassie show identical absorbance profiles with lambda max at 602 nm, thus the amount of the bound dye can easily be measured spectrophotometrically.     

Staining properties of bovine low molecular weight hydrophobic surfactant proteins after polyacrylamide gel electrophoresis.

Reports describing polyacrylamide gel electrophoresis patterns of bovine hydrophobic surfactant proteins are not consistent. In this study, we found unusual staining characteristics of these proteins that may explain some of these inconsistencies. Low molecular weight surfactant proteins extracted from bronchoalveolar lavage with organic solvent are partially delipidated with Sephadex LH-20 chromatography using chloroform and methanol. Fractions from the first protein peak are dried under nitrogen then subjected to SDS electrophoresis on 20% polyacrylamide gels. Under nonreducing conditions, silver staining identifies 5- and 26-kDa bands, and Coomassie blue identifies 6-, 12-, and 26-kDa bands. When gels are stained with Coomassie blue then silver, the 5- and 26-kDa bands stain with silver and 6- and 12-kDa bands remain stained with Coomassie blue. If gels are first stained with silver then Coomassie blue, similar results occur. We modified the silver staining protocol by treating gels with dithiothreitol or 2-mercaptoethanol after electrophoresis. With this modification, 5-, 6-, 12-, 26-, and also 17-kDa bands are identifiable. Using the modified protocol and restaining gels previously stained with silver, 6-, 12-, and 17-kDa bands that were not identified previously all became visible. In further experiments, protein bands of 6-, 12-, and 26-kDa that were identified by Coomassie blue were electroeluted under nonreducing conditions. After electrophoresis of the eluted 26-kDa protein, bands of 17-, and 26-kDa under nonreducing, and 8-kDa only under reducing conditions, were apparent by using the modified silver protocol.(ABSTRACT TRUNCATED AT 250 WORDS)     

Double staining to increase the sensitivity of protein detection in polyacrylamide gels.

As more and more researchers are examining proteins that are available only in extremely limited quantities, i.e., cellular extracts or genetic engineering products, it is critical to utilize staining methods that maximize sensitivity. The protocol we describe here--double staining of polyacrylamide electrophoresis gels with Pro-Blue (colloidal blue stain) followed by silver staining--yields an extremely sensitive, nonspecific protein stain. On average, this double-staining technique resulted in a 40-fold increase in sensitivity and intensity vs. silver stain alone. This is a tremendous return for a small investment in additional time and materials.     

Quantitation of proteins by elution of Coomassie brilliant blue R from stained bands after sodium dodecyl sulfate-polyacrylamide gel electrophoresis

A simple method for the extraction of Coomassie brilliant blue R from stained protein bands excised from polyacrylamide gels is described. Spectrophotometric measurement of the eluted dye forms the basis of a sensitive assay to quantitate proteins in gels in the range 0.5-10 micrograms. The method requires no unusual equipment and is suitable for measurement of multiple samples. The polypeptide is not extracted and remains available for further analysis. The technique has been applied to three proteins and gels of various acrylamide percentages.     

A sensitive silver stain for detecting lipopolysaccharides in polyacrylamide gels

A sensitive silver stain for detecting bacterial lipopolysaccharides in polyacrylamide gels is developed by modifying the silver-staining method used for proteins (cf. R. C. Switzer III, C. R. Merril, and S. Shifrin, Anal. Biochem.98, 231–237 (1979). Lipopolysaccharides are analyzed by polyacrylamide gel electrophoresis in the presence of sodium dodecyl sulfate followed by visualization with either the modified silver stain or periodic acid-Schiff stain. The lipopolysaccharides are stained dark brown by the silver stain. The silver stain is 500 times more sensitive than the periodic acid-Schiff stain and can detect less than 5 ng of rough type lipopolysaccharides. Analyses of 5μg of smooth-type lipopolysaccharides from Salmonella typhimurium and Escherichia coli O111: B4 show each to have 30–40 components of different molecular weights. The use of a lipopolysaccharide having a known structure and variable numbers of repeating units in the O side chain, such as one of the two lipopolysaccharides mentioned above, as molecular weight markers is proposed for the estimation of the molecular weights of other lipopolysaccharides or their components. The lipopolysaccharides can also be stained grayish green, but become grayish blue with a heavy sample load, using a silver-based color-staining method (D. W. Sammons, L. D. Adams, and E. E. Nishizawa, Electrophoresis2, 135–141 (1981)).     

Eosin Y staining of proteins in polyacrylamide gels.

A staining method is described in which various proteins in polyacrylamide gels can be stained by using eosin Y. After a brief incubation of a polyacrylamide gel in an acidic solution of 1% eosin Y, various proteins, including human erythrocyte membrane sialoglycoproteins which are not detectable by Coomassie blue R-250 (CB), can be detected with a sensitivity of 10 ng protein. This is far more sensitive than CB staining and is comparable to the sensitivity of silver staining. In a Western blot, the antigenicity of an eosin Y stained protein is retained. In addition, proteins on an immunoblot sheet can be detected by eosin Y staining. The method described is rapid, sensitive, and reproducible with various proteins in polyacrylamide gels and has the added advantage of also staining sialoglycoproteins.     

Visualization by chilling of protein bands in polyacrylamide gels containing 8 M urea: preparation and quantitation of foot-and-mouth disease virus capsid proteins

Protein bands become visible in polyacrylamide gels containing 8 m urea after chilling the gels in air for 5 to 10 min at ?70°C. Urea appears to crystallize preferentially as opaque bands in regions of the gel where protein reduces the amount of free water available as solvent for the urea molecules. Thus detected, the gel sections containing protein bands from foot-and-mouth disease virus can be immediately cut out, and their proteins obtained by electrophoretic elution or extraction procedures. Analysis of the proteins for purity and concentration is then carried out by electrophoresing measured aliquots on analytical gels, staining with Coomassie brilliant blue, scanning the gels for absorbance at 600 nm, and converting peak areas to micrograms of protein using Folin phenol standard curves determined for each purified capsid protein. The most basic capsid protein and its in virion proteolytic-cleavage products stain metachromatically.     

Visible fluorescent detection of proteins in polyacrylamide gels without staining

2,2,2-Trichloroethanol (TCE) incorporated into polyacrylamide gels before polymerization provides fluorescent visible detection of proteins in less than 5min of total processing time. The tryptophans in proteins undergo an ultraviolet light-induced reaction with trihalocompounds to produce fluorescence in the visible range so that the protein bands can be visualized on a 300-nm transilluminator. In a previous study trichloroacetic acid or chloroform was used to stain polyacrylamide gel electrophoresis (PAGE) gels for protein visualization. This study shows that placing TCE in the gel before electrophoresis can eliminate the staining step. The gel is removed from the electrophoresis apparatus and placed on a transilluminator and then the protein bands develop their fluorescence in less than 5min. In addition to being rapid this visualization method provides detection of 0.2microg of typical globular proteins, which for some proteins is slightly more sensitive than the standard Coomassie brilliant blue (CBB) method. Integral membrane proteins, which do not stain well with CBB, are visualized well with the TCE in-gel method. After TCE in-gel visualization the same gel can then be CBB stained, allowing for complementary detection of proteins. In addition, visualization with TCE in the gel is compatible with two-dimensional PAGE, native PAGE, Western blotting, and autoradiography.     

A new stain for copper-protein complexes: its use with crustacean hemocyanins.

A cyanide-tetrazolium medium is suggested as a rapid histochemical stain for copper. Red bands clearly mark the site of copper-protein complexes on polyacrylamide gels. The stain is darker, more specific, and more permanent than other methods currently in use and is particularly useful in the electrophoretic characterization of crustacean serum.     

Copper staining: a five-minute protein stain for sodium dodecyl sulfate-polyacrylamide gels

We present a new method for visualizing proteins electrophoresed in sodium dodecyl sulfate-polyacrylamide gels. After electrophoresis, gels are incubated in CuCl2 to produce a negative image of colorless protein bands against a semiopaque background. Gels are stained completely within 5 min, do not require destaining, and can be stored indefinitely without loss of the image. Because proteins are not permanently fixed within the gel, they can be quantitatively eluted after chelation of Cu with EDTA. The sensitivity of the CuCl2 stain falls between that of Coomassie blue and silver. We anticipate that CuCl2 will be useful in the rapid analysis of proteins by polyacrylamide gel electrophoresis and in the preparation of purified polypeptides by elution from gel slices.     

A highly sensitive silver stain for detecting proteins and peptides in polyacrylamide gels.

We have developed a highly sensitive stain for visualizing proteins in polyacrylamide gels. Our modification of the procedure for de Olmos' neural, cupric-silver stain is 100 times more sensitive than the conventional Coomassie blue stain (e.g., detection of 0.38 vs 38 ng/mm² of serum albumin), and is comparable to the sensitivity attained with an autoradiogram of ¹⁴C-methylated proteins following a 5-day exposure. This silver stain will be especially useful for analysis of patterns of proteins from tissue where attainment of the high specific activity of isotope labeling which is necessary to detect minor protein components is expensive, technically difficult or, as in humans, prohibited. In preliminary results with material such as unconcentrated cerebrospinal fluid, the silver stain revealed a complex pattern of proteins not visible with Coomassie blue.