Heterodera glycines: eggshell ultrastructure and histochemical localization of chitinous components

The eggshell in most nematodes consists of an outer vitelline layer, a middle chitinous and an inner lipid layer. Earlier work with eggs of Heterodera glycines suggests the presence of two chitinous layers but the vitelline layer was not observed. From our observation the outer chitin layer described in past literature is actually a vitelline layer. Histochemical analysis has demonstrated that chitin is absent from the outer envelope. Electron microscope observations of the eggshell show a waxy appearance and osmium staining consistent with that of the proteinaceous vitelline layer found in other nematodes. Lectin localization also shows that the eggshell continues to develop past fertilization with the delivery and integration of eggshell precursors. Contrary to previous reports, we propose that the ultrastructure of the eggshell H. glycines follows the common three-layer structure observed in other nematodes.     

Effects of Paecilomyces lilacinus protease and chitinase on the eggshell structures and hatching of Meloidogyne javanica juveniles

A serine protease and an enzyme preparation consisting of six chitinases, previously semi-purified from a liquid culture of Paecilomyces lilacinus strain 251, were applied to Meloidogyne javanica eggs to study the effect of the enzymes on eggshell structures. Transmission electron microscopic studies revealed that the protease and chitinases drastically altered the eggshell structures when applied individually or in combination. In the protease-treated eggs, the lipid layer disappeared and the chitin layer was thinner than in the control. The eggs treated with chitinases displayed large vacuoles in the chitin layer, and the vitelline layer was split and had lost its integrity. The major changes in the eggshell structures occurred by the combined effect of P. lilacinus protease and chitinases. The lipid layer was destroyed; the chitin layer hydrolyzed and the vitelline layer had lost integrity. The effect of P. lilacinus protease and chitinase enzymes on the hatching of M. javanica juveniles was also compared with a commercially available bacterial chitinase. The P. lilacinus protease and chitinase enzymes, either individually or in combination, reduced hatching of M. javanica juveniles whereas a commercial bacterial chitinase had an enhancing effect. Some juveniles hatched when the eggs were exposed to a fungal protease and chitinase mixture. We also established that P. lilacinus chitinases retained their activity in the presence of endogenous protease activity.     

Eggshell chitin and chitin-interacting proteins prevent polyspermy in C. elegans

Development requires fertilization by a single sperm. In Caenorhabditis elegans, fertilization occurs in a sperm-filled spermatheca, implying the barrier to polyspermy is generated in this compartment. Eggshell chitin synthesis is initiated at fertilization, and chitin is deposited before the zygote exits the spermatheca. Whereas polyspermy is very rare in wild-type, here we report an incidence of 14%-51% in zygotes made chitin deficient by loss of chitin synthase-1 (CHS-1), the CHS-1 substrate UDP-N-acetylglucosamine, the CHS-1-interacting protein EGG-3, or the sperm-provided protein SPE-11. The spe-11(hc90) mutant deposits chitin at the male end but fails to complete a continuous layer. The polyspermy barrier is also compromised by loss of the chitin-binding protein CBD-1 or the GLD-1-regulated LDL receptor-like EGG-1, together with its homolog, EGG-2. Loss of CBD-1 or EGG-1/2 disrupts oocyte cortical distribution of CHS-1, as well as MBK-2 and EGG-3. In CBD-1 or EGG-1/2 deficiency, chitin is synthesized but the eggshell is fractured, suggesting aberrantly clustered CHS-1/MBK-2/EGG-3 may fail to support construction of a continuous eggshell. Together, our results show that eggshell chitin is required to prevent polyspermy in C. elegans, in addition to its previously reported requirement in polar body extrusion and polarization of the zygote.     

Architecture and Assembly of the Bacillus subtilis Spore Coat

Bacillus spores are encased in a multilayer, proteinaceous self-assembled coat structure that assists in protecting the bacterial genome from stresses and consists of at least 70 proteins. The elucidation of Bacillus spore coat assembly, architecture, and function is critical to determining mechanisms of spore pathogenesis, environmental resistance, immune response, and physicochemical properties. Recently, genetic, biochemical and microscopy methods have provided new insight into spore coat architecture, assembly, structure and function. However, detailed spore coat architecture and assembly, comprehensive understanding of the proteomic composition of coat layers, and specific roles of coat proteins in coat assembly and their precise localization within the coat remain in question. In this study, atomic force microscopy was used to probe the coat structure of Bacillus subtilis wild type and cotA, cotB, safA, cotH, cotO, cotE, gerE, and cotE gerE spores. This approach provided high-resolution visualization of the various spore coat structures, new insight into the function of specific coat proteins, and enabled the development of a detailed model of spore coat architecture. This model is consistent with a recently reported four-layer coat assembly and further adds several coat layers not reported previously. The coat is organized starting from the outside into an outermost amorphous (crust) layer, a rodlet layer, a honeycomb layer, a fibrous layer, a layer of “nanodot” particles, a multilayer assembly, and finally the undercoat/basement layer. We propose that the assembly of the previously unreported fibrous layer, which we link to the darkly stained outer coat seen by electron microscopy, and the nanodot layer are cotH- and cotE- dependent and cotE-specific respectively. We further propose that the inner coat multilayer structure is crystalline with its apparent two-dimensional (2D) nuclei being the first example of a non-mineral 2D nucleation crystallization pattern in a biological organism.     

fc177, a minor dec-1 proprotein,is necessary to prevent ectopic aggregation of the endochorion during eggshell assembly in Drosophila

The Drosophila eggshell is a highly specialized extracellular matrix that forms between the oocyte and the surrounding epithelial follicle cells during late oogenesis. The dec-1 gene, which is required for proper eggshell assembly, produces three proproteins that are cleaved within the vitelline membrane layer to multiple derivatives. The different spatial distributions of the cleaved derivatives suggest that they play distinct roles in eggshell assembly. Using extant dec-1 mutations in conjunction with genetically engineered dec-1 transgenes, we show that, although all three dec-1 proproteins, fc106, fc125, and fc177, are required for female fertility, gross morphological abnormalities in the eggshell are observed only in the absence of fc177. The coalescence of the roof, pillar, and floor substructures of the tripartite endochorion suggested that quantitatively minor fc177 derivatives are necessary to prevent ectopic aggregation of endochorion proteins during the assembly process. Expression of a fc177 cDNA in dec-1 null mutants was sufficient to restore spaces within the endochorion layer. Fc177 may function as a scaffolding protein akin to those utilized in viral morphogenesis.     

The structure of the egg-shell of gLobodera rostochiensis (Nematoda: Tylenchida)

Perry R. N., Wharton D. A. and Clarke A. J. 1982. The structure of the egg-shell of Globodera rostochiensis (Nematoda: Tyienchida). International Journal for Parasitology12: 481–485. The ultrastructure and histochemistry of the egg-shell of Globodera rostochiensis are described. The eggshell consists of an outer vitelline layer, a chitinous layer and an inner lipid layer. The vitelline layer is not unit membrane-like and has strands of particulate material attached to its outer surface. The chitinous layer is made up of fibres consisting of a chitin microfibril core, surrounded by a protein coat. The lipid layer contains lipoprotein membranes. These vary in number, the most commonly observed pattern being two or three membranes loosely associated with the inner surface of the egg-shell.     

Characterization of spores of Bacillus subtilis that lack most coat layers

Spores of Bacillus subtilis have a thick outer layer of relatively insoluble protein called the coat, which protects spores against a number of treatments and may also play roles in spore germination. However, elucidation of precise roles of the coat in spore properties has been hampered by the inability to prepare spores lacking all or most coat material. In this work, we show that spores of a strain with mutations in both the cotE and gerE genes, which encode proteins involved in coat assembly and expression of genes encoding coat proteins, respectively, lack most extractable coat protein as seen by sodium dodecyl sulfate-polyacrylamide gel electrophoresis, as well as the great majority of the coat as seen by atomic force microscopy. However, the cotE gerE spores did retain a thin layer of insoluble coat material that was most easily seen by microscopy following digestion of these spores with lysozyme. These severely coat-deficient spores germinated relatively normally with nutrients and even better with dodecylamine but not with a 1:1 chelate of Ca(2+) and dipicolinic acid. These spores were also quite resistant to wet heat, to mechanical disruption, and to treatment with detergents at an elevated temperature and pH but were exquisitely sensitive to killing by sodium hypochlorite. These results provide new insight into the role of the coat layer in spore properties.     

Characterization of the eggshell of Haemonchus contortus--I. Structural components.

1. By transmission electron microscopy, the eggshell of Haemonchus contortus was seen to be similar to previously studied nematodes, with an outer vitelline layer bounded by a trilaminate membrane, a broad medial region, containing chitin, and an electron dense basal region, containing lipid and protein. 2. Exposure of Haemonchus contortus eggs to proteases resulted in disruption of the shell with removal of components of the outer, medial and basal regions. Exposure to chitinase depleted fibrillar components of the medial region of the shell, while collagenase had no effect. 3. Chloroform/methanol extraction of fresh eggshells caused a minor condensation of the outer, vitelline layer and some depletion of the basal layer. 4. After normal hatching, shells appeared similar to those treated with protease and chitinase, but also lacked the basal, lipid layer. 5. Extracts of isolated unhatched eggshells and hatched eggshells, and extracts of biotin-labelled whole fresh eggs showed three major protein bands when run on sodium dodecyl sulphate-polyacrylamide gels indicating that these three proteins are most likely structural in nature and do not participate in the release of the larva from the eggshell. 6. Biotin-labelled protein bands were degraded by proteases and chitinase, but not collagenase or lipase.     

SpoVID guides SafA to the spore coat in Bacillus subtilis

Bacteria assemble complex structures by targeting proteins to specific subcellular locations. The protein coat that encases Bacillus subtilis spores is an example of a structure that requires coordinated targeting and assembly of more than 24 polypeptides. The earliest stages of coat assembly require the action of three morphogenetic proteins: SpoIVA, CotE, and SpoVID. In the first steps, a basement layer of SpoIVA forms around the surface of the forespore, guiding the subsequent positioning of a ring of CotE protein about 75 nm from the forespore surface. SpoVID localizes near the forespore membrane where it functions to maintain the integrity of the CotE ring and to anchor the nascent coat to the underlying spore structures. However, it is not known which spore coat proteins interact directly with SpoVID. In this study we examined the interaction between SpoVID and another spore coat protein, SafA, in vivo using the yeast two-hybrid system and in vitro. We found evidence that SpoVID and SafA directly interact and that SafA interacts with itself. Immunofluorescence microscopy showed that SafA localized around the forespore early during coat assembly and that this localization of SafA was dependent on SpoVID. Moreover, targeting of SafA to the forespore was also dependent on SpoIVA, as was targeting of SpoVID to the forespore. We suggest that the localization of SafA to the spore coat requires direct interaction with SpoVID.     

Mosquito embryos and eggs: polarity and terminology of chorionic layers

The development of genetically modified vectors refractory to parasites is seen as a promising strategy in the future control of endemic diseases such as malaria. Nevertheless, knowledge of mosquito embryogenesis, a pre-requisite to the establishment of transgenic individuals, has been presently neglected. We have here studied the eggs from two neotropical malaria vectors. Eggs from Anopheles (Nyssorhynchus) albitarsis and Anopheles (Nyssorhynchus) aquasalis were analyzed by laser scanning microscopy and scanning electron microscopy and compared to those of Drosophila melanogaster. We verified basic conflicting data such as mosquito egg polarity and ultrastructure of eggshell layers. A 180 degrees rotation movement of the mosquito embryo along its longitudinal axis, a phenomenon not conserved among all Diptera, was confirmed. This early event is not taken into account by several present groups, leading to a non-consensual assignment of eggshell dorsal and ventral poles. Since embryo and egg polarities, defined during oogenesis, are the same, we propose to consider the flattened egg side as the dorsal one. The structure of Anopheles eggshell was also examined. Embryos are covered by a smooth endochorion or inner chorion layer. Outside this coat lies the compound exochorion or outer chorion layer, assembled by a thin basal lamellar layer and external tubercles. The terminology related to eggshell layers is discussed.     

Formation of chitin-based nanomaterials using a chitin-binding peptide selected by phage-display

Targeting polymers with peptides is an efficient strategy to functionalize biomaterials. Phage display technology is one of the most powerful techniques for selecting specific peptides for a wide variety of targets. A method to select a chitin-binding peptide from a 12-mer random peptide library was successfully performed against chitin immobilized in wells of microtiter plates. The synthetic chitin binding peptide (ChiBP) could bind to chitin beads and disrupt their structure. This selected peptide was successfully used to immobilize alkaline phosphatase on chitin. In addition, the peptide could induce colloidal chitin in water to form a chitin coat on the surface of plastic tubes. Scanning electron microscopy (SEM) revealed that the peptide could induce colloidal chitin and chitohexaose to form networks when the temperature was raised to 42°C.     

Anatomical and biochemical changes in the composition of developing seed coats of annatto (Bixa orellana L.)

Seeds of Bixa orellana (L.) have a sclerified palisade cell layer, which constitutes a natural barrier to water uptake. In fact, newly fully developed B. orellana seeds are highly impermeable to water and thereby dormant. The purpose of this work is to investigate, from a developmental point of view, the histochemical and physical changes in the cell walls of the seed coat that are associated with the water impermeability. Seed coat samples were analyzed by histochemical and polarization microscopy techniques, as well as by fractionation/HPAEC-PAD. For histochemical analysis the tissue samples were fixed, dehydrated, embedded in paraffin and the slides were dewaxed and tested with appropriate stains for different cell wall components. Throughout the development of B. orellana seeds, there was a gradual thickening of the seed coat at the palisade region. This thickening was due to the deposition of cellulose and hemicelluloses in the palisade layer cell walls, which resulted in a highly water impermeable seed coat. The carbohydrate composition of the cell walls changed dramatically at the late developmental stages due to the intense deposition of hemicelluloses. Hemicelluloses were mainly deposited in the outer region of the palisade layer cell walls and altered the birefringent pattern of the walls. Xylans were by far the most abundant hemicellulosic component of the cell walls. Deposition of cellulose and hemicelluloses, especially xylans, could be responsible for the impermeability to water observed in fully developed B. orellana seeds.     

Assembly and interactions of cotJ-encoded proteins, constituents of the inner layers of the Bacillus subtilis spore coat

During Bacillus subtilis endospore formation, a complex protein coat is assembled around the maturing spore. The coat is made up of more than two dozen proteins that form an outer layer, which provides chemical resistance, and an inner layer, which may play a role in the activation of germination. A third, amorphous layer of the coat occupies the space between the inner coat and the cortex, and is referred to as the undercoat. Although several coat proteins have been characterized, little is known about their interactions during assembly of the coat. We show here that at least two open reading frames of the cotJ operon ( cotJA and cotJC ) encode spore coat proteins. We suggest that CotJC is a component of the undercoat, since we found that its assembly onto the forespore is not prevented by mutations that block both inner and outer coat assembly, and because CotJC is more accessible to antibody staining in spores lacking both of these coat layers. Assembly of CotJC into the coat is dependent upon expression of cotJA . Conversely, CotJA is not detected in the coats of a cotJC insertional mutant. Co-immunoprecipitation was used to demonstrate the formation of complexes containing CotJA and CotJC 6 h after the onset of sporulation. Experiments with the yeast two-hybrid system indicate that CotJC may interact with itself and with CotJA. We suggest that interaction of CotJA with CotJC is required for the assembly of both CotJA and CotJC into the spore coat.     

藏马鸡卵壳的扫描电镜观察

利用扫描电镜对我国特有珍禽──藏马鸡的卵壳进行了超微结构观察。电镜下显示：藏马鸡卵壳从内向外由壳膜层、锥体层、海绵层和表层等组成。壳膜层内层致密、含少量纤维,外层为纵横交错成网状的纤维结构,锥体层由许多乳头状突起密集排列组成,海绵层为似沉积岩层的层状结构,表层在卵壳最外面,上由具保护性的透明蛋白质薄膜覆盖。与同属的褐马鸡的卵壳进行比较,其超微结构存在差异。     

Transglutaminase-mediated cross-linking of GerQ in the coats of Bacillus subtilis spores

The spores of Bacillus subtilis show remarkable resistance to many environmental stresses, due in part to the presence of an outer proteinaceous structure known as the spore coat. GerQ is a spore coat protein essential for the presence of CwlJ, an enzyme involved in the hydrolysis of the cortex during spore germination, in the spore coat. Here we show that GerQ is cross-linked into higher-molecular-mass forms due in large part to a transglutaminase. GerQ is the only substrate for this transglutaminase identified to date. In addition, we show that cross-linking of GerQ into high-molecular-mass forms occurs only very late in sporulation, after mother cell lysis. These findings, as well as studies of GerQ cross-linking in mutant strains where spore coat assembly is perturbed, lead us to suggest that coat proteins must assemble first and that their cross-linking follows as a final step in the spore coat formation pathway.     

Cracks in the palisade cuticle of soybean seed coats correlate with their permeability to water

BACKGROUND AND AIMS: Soybean (Glycine max) is among the many legumes that are well known for 'hardseededness'. This feature can be beneficial for long-term seed survival, but is undesirable for the food processing industry. There is substantial disagreement concerning the mechanisms and related structures that control the permeability properties of soybean seed coats. In this work, the structural component that controls water entry into the seed is identified. METHODS: Six soybean cultivars were tested for their seed coat permeabilities to water. To identify the structural feature(s) that may contribute to the determination of these permeabilities, fluorescent tracer dyes, and light and electron microscopic techniques were used. KEY RESULTS: The cultivar 'Tachanagaha' has the most permeable seed coat, 'OX 951' the least permeable seed coat, and the permeabilities of the rest ('Harovinton', 'Williams', 'Clark L 67-3469', and 'Harosoy 63') are intermediate. All seeds have surface deposits, depressions, a light line, and a cuticle about 0.2 microm thick overlaying the palisade layer. In permeable cultivars the cuticle tends to break, whereas in impermeable seeds of 'OX 951' it remains intact. In the case of permeable seed coats, the majority of the cracks are from 1 to 5 micro m wide and from 20 to 200 micro m long, and occur more frequently on the dorsal side than in other regions of the seed coat, a position that correlates with the site of initial water uptake. CONCLUSIONS: The cuticle of the palisade layer is the key factor that determines the permeability property of a soybean seed coat. The cuticle of a permeable seed coat is mechanically weak and develops small cracks through which water can pass. The cuticle of an impermeable seed coat is mechanically strong and does not crack under normal circumstances.     

Functional regions of the Bacillus subtilis spore coat morphogenetic protein CotE

The Bacillus subtilis spore is encased in a resilient, multilayered proteinaceous shell, called the coat, that protects it from the environment. A 181-amino-acid coat protein called CotE assembles into the coat early in spore formation and plays a morphogenetic role in the assembly of the coat's outer layer. We have used a series of mutant alleles of cotE to identify regions involved in outer coat protein assembly. We found that the insertion of a 10-amino-acid epitope, between amino acids 178 and 179 of CotE, reduced or prevented the assembly of several spore coat proteins, including, most likely, CotG and CotB. The removal of 9 or 23 of the C-terminal-most amino acids resulted in an unusually thin outer coat from which a larger set of spore proteins was missing. In contrast, the removal of 37 amino acids from the C terminus, as well as other alterations between amino acids 4 and 160, resulted in the absence of a detectable outer coat but did not prevent localization of CotE to the forespore. These results indicate that changes in the C-terminal 23 amino acids of CotE and in the remainder of the protein have different consequences for outer coat protein assembly.     

Characterization of the Bacillus subtilis spore morphogenetic coat protein CotO

Bacillus spores are protected by a structurally and biochemically complex protein shell composed of over 50 polypeptide species, called the coat. Coat assembly in Bacillus subtilis serves as a relatively tractable model for the study of the formation of more complex macromolecular structures and organelles. It is also a critical model for the discovery of strategies to decontaminate B. anthracis spores. In B. subtilis, a subset of coat proteins is known to have important roles in assembly. Here we show that the recently identified B. subtilis coat protein CotO (YjbX) has an especially important morphogenetic role. We used electron and atomic force microscopy to show that CotO controls assembly of the coat layers and coat surface topography as well as biochemical and cell-biological analyses to identify coat proteins whose assembly is CotO dependent. cotO spores are defective in germination and partially sensitive to lysozyme. As a whole, these phenotypes resemble those resulting from a mutation in the coat protein gene cotH. Nonetheless, the roles of CotH and CotO and the proteins whose assembly they direct are not identical. Based on fluorescence and electron microscopy, we suggest that CotO resides in the outer coat (although not on the coat surface). We propose that CotO and CotH participate in a late phase of coat assembly. We further speculate that an important role of these proteins is ensuring that polymerization of the outer coat layers occurs in such a manner that contiguous shells, and not unproductive aggregates, are formed.     

Structural basis for cargo regulation of COPII coat assembly

Using cryo-electron microscopy, we have solved the structure of an icosidodecahedral COPII coat involved in cargo export from the endoplasmic reticulum (ER) coassembled from purified cargo adaptor Sec23-24 and Sec13-31 lattice-forming complexes. The coat structure shows a tetrameric assembly of the Sec23-24 adaptor layer that is well positioned beneath the vertices and edges of the Sec13-31 lattice. Fitting the known crystal structures of the COPII proteins into the density map reveals a flexible hinge region stemming from interactions between WD40 beta-propeller domains present in Sec13 and Sec31 at the vertices. The structure shows that the hinge region can direct geometric cage expansion to accommodate a wide range of bulky cargo, including procollagen and chylomicrons, that is sensitive to adaptor function in inherited disease. The COPII coat structure leads us to propose a mechanism by which cargo drives cage assembly and membrane curvature for budding from the ER.