DFT study of structure and vibrational spectra of ceramide 3: comparison to experimental data

The Fourier transform Raman and infrared (IR) spectra of the Ceramide 3 (CER3) have been recorded in the regions 200–3500 cm^? 1 and 680–4000 cm^? 1, respectively. We have calculated the equilibrium geometry, harmonic vibrational wavenumbers, electrostatic potential surfaces, absolute Raman scattering activities and IR absorption intensities by the density functional theory with B3LYP functionals having extended basis set 6-311G. This work is undertaken to study the vibrational spectra of CER3 completely and to identify the various normal modes with better wavenumber accuracy. Good consistency is found between the calculated results and experimental data for the IR and Raman spectra.     

Direct discrimination of different plant populations and study on temperature effects by Fourier transform infrared spectroscopy

Fourier transform infrared spectroscopy was used to characterise highland and lowland populations of Polygonum minus Huds. grown in different controlled environments. A thermal perturbation technique of two-dimensional correlation infrared spectroscopy (2D-IR) correlation spectra was applied to establish differences between the populations. The absorption peaks at 3,480 cm^?1 (hydroxyl group), 2,927 cm^?1 (methyl group), 1,623 cm^?1 (carbonyl group), and 1,068 cm^?1 (C–O group) were particularly powerful in separating the populations. These peaks, which indicate the presence of carbohydrate, terpenes, amide and flavonoids were more intense for the highland populations than lowland populations, and increased in environments with a higher temperature. Wavenumbers (1,634, 669 cm^?1) and (1,634, 1,555 cm^?1) in the 2D-IR correlation spectra provided fingerprint signals to differentiate plants grown at different temperatures. This study demonstrates that IR fingerprinting, which combines mid-IR spectra and 2D-IR correlation spectra, can directly discriminate different populations of P. minus and the effects of temperature.     

An investigation into possible quantum chaos in the H<Subscript>2</Subscript> molecule under intense laser fields via Ehrenfest phase space (EPS) trajectories

By employing the Ehrenfest "phase space" trajectory method for studying quantum chaos, developed in our laboratory, the present study reveals that the H₂ molecule under intense laser fields of three different intensities, I?=?1?×?10¹⁴ W/cm², 5?×?10¹⁴ W/cm², and 1?×?10¹⁵ W/cm², does not show quantum chaos. A similar conclusion is also reached through the Loschmidt echo (also called quantum fidelity) calculations reported here for the first time for a real molecule under intense laser fields. Thus, a long-standing conjecture about the possible existence of quantum chaos in atoms and molecules under intense laser fields has finally been tested and not found to be valid in the present case.     

The detection of food soils on stainless steel using energy dispersive X-ray and Fourier transform infrared spectroscopy

Organic soiling is a major issue in the food processing industries, causing a range of biofouling and microbiological problems. Energy dispersive X-ray (EDX) and Fourier transform infra red spectroscopy (FT-IR) were used to quantify and determine the biochemical groups of food soils on stainless steel surfaces. EDX quantified organic material on surfaces where oily based residues predominated, but was limited in its usefulness since other food soils were difficult to detect. FT-IR provided spectral ‘fingerprints’ for each of the soils tested. Key soiling components were associated with specific peaks, viz. oils at 3025 cm^?1–3011 cm^?1, proteins at 1698 cm^?1–1636 cm^?1 and carbohydrates at 1658 cm^?1–1596 cm^?1, 783 cm^?1–742 cm^?1. High concentrations of some soils (10%) were needed for detection by both EDX and FT-IR. The two techniques may be of use for quantifying and identifying specific recalcitrant soils on surfaces to improve cleaning and hygiene regimes.     

Structural analysis of some soluble elastins by means of FT‐IR and 2D IR correlation spectroscopy

Fourier transform infrared (FT‐IR) spectroscopy combined with 2D correlation spectroscopy has been used to offer some information about stability and structure of some soluble elastins. Temperature has been chosen as the perturbation to monitor the infrared behavior of various soluble elastins, namely, α‐elastin p, α‐elastin, and k‐elastin. In the 3800–2700 cm^?1 region, the H‐containing groups were analyzed. The bonded hydroxyls are found to decrease prior to the NH‐related hydrogen bonds and also to the conformational reorganization of hydrocarbon chains. The transition temperatures were evaluated and they were found to agree with those obtained from DSC data. The FTIR spectra and their 2nd derivatives denote that α‐ elastins exhibited amide‐I, ‐II and ‐III bands at 1656, 1539 and 1236 cm^?1, respectively, while in k‐elastin these bands were found at 1652 cm^?1 for amide I, 1540 cm^?1 for amide II and 1248 cm^?1 for amide III. The macroscopic IR finger‐print method, which combines: general IR spectra, secondary derivative spectra, and 2D‐IR correlation spectra, is useful to discriminate different elastins. Thus using the differences of the position and intensity of the bands from “fingerprint region” of studied elastins, which include the peaks assigned to C?O, C? C groups from α‐helix, β‐turn, and the peaks assigned to the amide groups, it is possible to identify and discriminate elastins from each others. Furthermore, the pattern of 2D‐IR correlation spectra under thermal perturbation, allow their direct identification and discrimination. © 2010 Wiley Periodicals, Inc. Biopolymers 93: 1072–1084, 2010. This article was originally published online as an accepted preprint. The “Published Online” date corresponds to the preprint version. You can request a copy of the preprint by emailing the Biopolymers editorial office at biopolymers@wiley.com     

Quantum chemical insight on vibration spectra of silica systems

A set of silicate ions and corresponding lithium salts have been quantum chemically (QC) simulated in a “free molecule” approach. The infrared (IR), inelastic neutron scattering (INS), and Raman spectra have been simulated and fitted to the experimentally registered ones. The complete assignment of the vibrational bands along with the intensities and potential energy distribution has been performed. The applicability of the traditionally used quasimolecule Si–O–Si model to the interpretation of bands near 440–480 cm^? 1 and so-called “Boson” peak near 50 cm^? 1 has been critically discussed.     

Comparison of mitral annulus geometry between patients with ischemic and non-ischemic functional mitral regurgitation: implications for transcatheter mitral valve implantation

Background

Transcatheter mitral valve replacement (TMVR) is a new therapeutic option for high surgical risk patients with mitral regurgitation (MR). Mitral valve (MV) geometry quantification is of paramount importance for success of the procedure and transthoracic 3D echocardiography represents a useful screening tool. Accordingly, we sought to asses MV geometry in patients with functional MR (FMR) that would potentially benefit of TMVR, focusing on the comparison of mitral annulus (MA) geometry between patients with ischemic (IMR) and non ischemic mitral regurgitation (nIMR).

Methods

We retrospectively selected 94 patients with severe FMR: 41 (43,6%) with IMR and 53 (56,4%) with nIMR. 3D MA analysis was performed on dedicated transthoracic 3D data sets using a new, commercially-available software package in two moments of the cardiac cycle (early-diastole and mid-systole). We measured MA dimension and geometry parameters, left atrial and left ventricular volumes.

Results

Maximum (MA area 10.7?±?2.5 cm² vs 11.6?±?2.7 cm², p?>?0.05) and the best fit plane MA area (9.9?±?2.3 cm² vs 10.7?±?2.5 cm², p?>?0.05, respectively) were similar between IMR and nIMR. nIMR patients showed larger mid-systolic 3D area (9.8?±?2.3 cm² vs 10.8?±?2.7 cm², p?<?0.05) and perimeter (11.2?±?1.3 cm vs 11.8?±?1.5 cm, p?<?0.05) with longer and larger leaflets, and wider aorto-mitral angle (135?±?10° vs 141?±?11°, p?<?0.05). Conversely, the area of MA at the best fit plane did not differ between IMR and nIMR patients (9?±?1.1 cm² vs 9.9?±?1.5 cm², p?>?0.05).

Conclusions

Patients with ischemic and non-ischemic etiology of FMR have similar maximum dimension, yet systolic differences between the two groups should be taken into account to tailor prosthesis’s selection.

Trial registration

N.A.

     

Isolation and Characterization of Coal Solubilizing Aerobic Microorganisms from Salt Range Coal Mines,Pakistan

Microbial solubilization of coal has been considered as a promising technology to convert raw coal into valuable products. In the present study, initially a total of 50 different aerobic bacterial and fungal isolates have been isolated from soil, coal and water samples of Dulmial Coal Mines, Chakwal, Pakistan, but on the basis of solubilization potential, only four isolates were selected for further study. The intensity of biosolubilization was measured by determining the weight loss of the coal pieces, which was observed to be about 25.93% by Pseudomonas sp. AY2, 36.36% by Bacillus sp. AY3 and 50% by Trichoderma sp. AY6, while Phanerochaete sp. AY5 showed maximum coal solubilization potential i.e. 66.67% in 30 days. UV/Vis spectrum revealed an increase in the pattern of absorbance of all treated samples compared to control referring to solubilization. Fourier transform infrared spectroscopy indicated alterations in the structure of treated coal in comparison to control coal suggesting breakdown in the complex structure of coal. The major absorbance bands in infrared spectroscopy for solubilization product were attributed to carbonyl (1,600 cm^?1), hydroxyl (3,450 cm^?1), cyclane (2,925 cm^?1), ether linkage (1,000–1,300 cm^?1), carboxyl (3,300–2,500 cm^?1) and side chains of aromatic ring (1,000–500 cm^?1). The presence of microorganisms and surface erosion of coal residues compared to control samples were observed by scanning electron microscopy, which suggested that isolated microorganisms were able to survive in coal for a longer period of time. Therefore, the present study concluded that microorganisms isolated from coal mines have excellent potential for coal solubilization which is considered as a crucial step in coal methanogenesis allowing them to be used successfully for in situ methane production to meet future energy demands.     

DNA Methylation Detection Using Resonance and Nanobowtie-Antenna-Enhanced Raman Spectroscopy

We show that DNA carrying 5-methylcytosine modifications or methylated DNA (m-DNA) can be distinguished from DNA with unmodified cytosine by Raman spectroscopy enhanced by both a bowtie nanoantenna and excitation resonance. In particular, m-DNA can be identified by a peak near 1000 cm^?1 and changes in the Raman peaks in the 1200–1700 cm^?1 band that are enhanced by the ring-absorption resonance. The identification is robust to the use of resonance Raman and nanoantenna excitation used to obtain significant signal improvement. The primary differences are three additional Raman peaks with methylation at 1014, 1239, and 1639 cm^?1 and spectral intensity inversion at 1324 (C₅=C₆) and 1473 cm^?1 (C₄=N₃) in m-DNA compared to that of DNA with unmodified cytosine. We attribute this to the proximity of the methyl group to the antenna, which brings the (C₅=C₆) mode closer to experiencing a stronger near-field enhancement. We also show distinct Raman spectral features attributed to the transition of DNA from a hydrated state, when dissolved, to a dried/denatured state. We observe a general broadening of the larger lines and a transfer of spectral weight from the ～1470 cm^?1 vibration to the two higher-energy lines of the dried m-DNA solution. We attribute the new spectral characteristics to DNA softening under high salt conditions and find that the m-DNA is still distinguishable via the ～1000 cm^?1 peak and distribution of the signal in the 1200–1700 cm^?1 band. The nanoantenna gain exceeds 20,000, whereas the real signal ratio is much less because of a low average enhanced region occupancy even with these relatively high DNA concentrations. It is improved when fixed DNA in a salt crystal lies near the nanoantenna. The Raman resonance gain profile is consistent with A-term expectations, and the resonance is found at ～259 nm excitation wavelength.     

Lake Chapo: a baseline study of a deep, oligotrophic North Patagonian lake prior to its use for hydroelectricity generation: I. Physical and chemical properties

A baseline study on a temperate, oligotrophic North Patagonian lake (Lake Chapo, Southern Chile) was made prior to the installation of a hydroelectric power station. Throughout one year (September 1986–October 1987) the physical and chemical properties of the lake were investigated monthly from the surface to a depth of 40 m. Lake Chapo is a deep, transparent (Secchi depth: 17–25 m), glacial lake located at 41°?27.5′?S and 72°?30′?W. It has a maximum depth of 298 m, mean depth of 183 m, surface area of 45.3 km² and water volume of 8.296 km³. The theoretical residence time of the water was 5.5 years. The temperature regime is monomictic with the mixed temperature between 8.1–8.8?°C. Maximum temperature at the surface was 18.7?°C during thermal stratification in summer when the epilimnion had a thickness of about 20 m. The conductivity was low (20.3–23.8 μS cm^?1) as was the buffering capacity of a predominantly CO₂-carbonate system. The predominant cations were Ca⁺²¿ Na⁺¿Mg⁺²¿K⁺. The phosphorous and nitrogen contents were very low (soluble reactive ortophosphate: 0–1.5 μg P l^?1, total phosphorus: 0.3–4 μg P l^?1 and nitrate: 0–35 μg N l^?1), which is typical of North Patagonian lakes.     

Kinetics and mathematical modeling of infrared thin-layer drying of garlic slices

Drying of garlic slices in thin-layer have been studied with Infrared (IR) at 0.075, 0.15, 0.225 and 0.3 W cm^?2 radiation intensity and 0.75 and 1.25 m s^?1 air flow velocity. The results showed increasing in drying rate and decreasing at the time of drying with decreasing air flow velocity and increasing IR radiation intensity. The effective moisture diffusivity (D_eff) was obtained using Fick’s diffusion equation and its mean values ranged between 5.83×10^?11 and 7.66×10^?10 m² s^?1 for all investigated conditions. In addition, a third-order polynomial equation linking the effective moisture diffusivity and moisture content was found. Average activation energy increased with the decrease of IR radiation and increase of air flow velocity. Thirteen different mathematical models were verified with non-linear regression analysis for describing the garlic drying process. Modified Henderson and Pabis model presented the best prediction of the drying of garlic slices.     

Monitoring of biomass composition from microbiological sources by means of FT‐IR spectroscopy

An FT‐IR spectroscopic method was developed for the simultaneous quantitative analysis of biomacromolecular components in biomass, originating from various microbiological sources. For the determination of protein, lipid and carbohydrate content, creatine phosphokinase, egg phosphatidyl choline and starch hydrolysate were chosen as external standards. This selection was based on spectral similarity and ease of availability. Protein content was based on the area under the amide II band profile around 1,545 cm^?1. Because of the heterogeneous lipid composition in the different species, lipid content was determined using integration over the C? H stretching vibrational population between 2,984 and 2,780 cm^?1. Carbohydrate content was determined using integration over a C? O and C? O? C stretching band area between 1,180 and 1,133 cm^?1. Linear regression analysis provided three calibration lines, according to which biomasses from ten species were analyzed. This approach showed good intra‐batch reproducibility. With this method we could demonstrate good reproducibility between batches of the same species with similar growth conditions while large differences in biomass composition were observed between the various species. Protein content as determined by FT‐IR spectroscopy compared well with the results obtained from elemental analysis. Biotechnol. Bioeng. 2009;103: 123–129. © 2008 Wiley Periodicals, Inc.     

Terahertz-infrared spectroscopy of <Emphasis Type="Italic">Shewanella oneidensis</Emphasis> MR-1 extracellular matrix

Employing optical spectroscopy we have performed a comparative study of the dielectric response of extracellular matrix and filaments of electrogenic bacteria Shewanella oneidensis MR-1, cytochrome c, and bovine serum albumin. Combining infrared transmission measurements on thin layers with data of the terahertz spectra, we obtain the dielectric permittivity and AC conductivity spectra of the materials in a broad frequency band from a few cm^?1 up to 7000 cm^?1 in the temperature range from 5 to 300 K. Strong absorption bands are observed in the three materials that cover the range from 10 to 300 cm^?1 and mainly determine the terahertz absorption. When cooled down to liquid helium temperatures, the bands in Shewanella oneidensis MR-1 and cytochrome c reveal a distinct fine structure. In all three materials, we identify the presence of liquid bound water in the form of librational and translational absorption bands at ≈ 200 and ≈ 600 cm^?1, respectively. The sharp excitations seen above 1000 cm^?1 are assigned to intramolecular vibrations.     

Tree Species Composition, Structure, and Aboveground Wood Biomass of a Riparian Forest of the Lower Miranda River, Southern Pantanal, Brazil

The aboveground wood biomass (AWB) of tropical forests plays an important role in the global carbon cycle, and local AWB estimates provide essential data that enable the extrapolation of biomass stocks to ecosystem or biome-wide carbon cycle modelling. Few AWB estimates exist in Neotropical freshwater floodplains, where tree species distribution and forest structure depend on the height and duration of periodic inundations. We investigated tree species composition, forest structure, wood specific gravity, and AWB of trees ≥10 cm dbh in 16 plots totalling an area of 1 ha in a seasonally inundated riparian forest of the lower Miranda River, southern Pantanal, Brazil. The 443 tree individuals belonged to 46 species. Four species (Inga vera, Ocotea suaveolens, Tabebuia heptaphylla and Cecropia pachystachya) comprised more than 50% of the Total Importance Values (TIV), and floristic similarities between the plots averaged 38%. Although we detected an overall increase in species diversity correlated with decreasing flood levels, the most important tree species had almost identical distribution patterns along the flooding gradient. The stand basal area per plot (±?s.d.) amounted to 3.0?±?1.1 m² (47.8?±?18.1 m²/ha), and the tree heights averaged 10.9?±?1.4 m. Multiplying the individual basal areas by individual tree heights and a form factor of 0.6, we estimated the aboveground wood volume (AWV) for each individual, and for each plot (24.4?±?11.7 m³, 391.1?±?188 m³/ha). Wood specific gravity (SG) varied between 0.39 g/cm³ (Cecropia pachystachya) and 0.87 g/cm³ (Tabebuia heptaphylla), with a stand level average of 0.63?±?0.12 g/cm³. Multiplying the individual AWV with species SG, we estimated the plot AWB to be 16.2?±?6.4 Mg (259.4?±?102 Mg/ha). This value is comparable to that reported for late-successional forest stands of Amazonian floodplain forests, and it is close to the worldwide tropical average AWB. Because tree heights in the present forest were comparatively low when compared to other Neotropical forests, we found that resprouting of stems accounted for comparatively high basal areas. We argue that stem resprouting is an adaptation of tree species originating in non-flooded Cerrado to the seasonal inundations of riparian forests.     

Blood clearance and occupational exposure for <Superscript>177</Superscript>Lu-DOTATATE compared to <Superscript>177</Superscript>Lu-PSMA radionuclide therapy

The main target of this work is to examine blood clearance and external exposure for ¹⁷⁷Lu-DOTATATE compared with new emerging ¹⁷⁷Lu-PSMA therapy. Blood clearance and radiation exposure of 31 patients treated with 5.5?±?1.1 GBq ¹⁷⁷Lu-DOTATATE were compared to those of 23 patients treated with 7.4 GBq ¹⁷⁷Lu-PSMA. Dose rates were measured at several distances and time points up to 120 h after treatment. Blood samples were collected conjunctively after infusion. Caregiver’s cumulative dose was measured by means of an OSL (optically stimulated luminescence) dosimeter for 4–5 days and medical staff’s dose was also estimated using electronic personal dosimeters. Finger dose was determined via ring TLD (Thermoluminescence Dosimeter) for radiopharmacists and nurses. Dose rates due to ¹⁷⁷Lu-DOTATATE at a distance of 1 m, 4 h and 6 h after infusion, were 3.0?±?2.8 and 2?±?1.9 µSv/(h GBq), respectively, while those due to ¹⁷⁷Lu-PSMA were 3.1?±?0.8 and 2.2?±?0.9 µSv/(h GBq). Total effective dose of 17 caregivers was 100–200 µSv for ¹⁷⁷Lu-DOTATATE therapy. Mean effective doses to nurses and radiopharmacists were 5 and 4 µSv per patient, respectively, while those for physicists and physicians were 2 µSv per patient. For ¹⁷⁷Lu-DOTATATE, effective half-life in blood and early elimination phase were 0.31?±?0.13 and 4.5?±?1 h, while they were found as 0.4?±?0.1 and 5?±?1 h, respectively, for ¹⁷⁷Lu-PSMA. The first micturition time following ¹⁷⁷Lu-DOTATATE infusion was noted after 36?±?14 min, while the second and third voiding times were after 74?±?9 and 128?±?41 min, respectively. It is concluded that blood clearance and radiation exposure for ¹⁷⁷Lu-DOTATATE are very similar to those for ¹⁷⁷Lu-PSMA, and both treatment modalities are reasonably reliable for outpatient treatment, since the mean dose rate [2.1 µSv/(h GBq)] decreased below the dose rate that allows release of the patient from the hospital (20 µSv/h) after 6 h at 1 m distance.     

Small differences in ombrotrophy control regional-scale variation in methane cycling among <Emphasis Type="Italic">Sphagnum</Emphasis>-dominated peatlands

Across northern Alberta, Canada, bogs experience periodic wildfire and, in the Fort McMurray region, are exposed to increasing atmospheric N deposition related to oil sands development. As the fire return interval shortens and/or growing season temperatures increase, the regional peatland CO₂–C sink across northern Alberta will likely decrease, but the magnitude of the decrease could be diminished if increasing atmospheric N deposition alters N cycling in a way that stimulates post-fire successional development in bogs. We quantified net ammonification, nitrification, and dissolved organic N (DON) production in surface peat along a post-fire chronosequence of five bogs where we also experimentally manipulated N deposition (no water controls plus 0, 10, and 20 kg N ha^?1 yr^?1 simulated deposition, as NH₄NO₃). Initial KCl-extractable NH₄⁺–N, NO₃^?–N and DON averaged 176?±?6, 54?±?0.2, and 3580?±?40 ng N cm^?3, respectively, with no consistent changes as a function of time since fire and no consistent effects of experimental N addition. Net ammonification, nitrification, and DON production averaged 3.8?±?0.3, 1.6?±?0.2, and 14.3?±?2.0 ng N cm^?3 d^?1, also with no consistent changes as a function of time since fire and no consistent effects of experimental N addition. Our hypothesis that N mineralization would be stimulated after fire because root death would create a pulse of labile soil organic C was not supported, most likely because ericaceous plant roots typically are not killed in boreal bog wildfires. The absence of any N mineralization response to experimental N addition is most likely a result of rapid immobilization of added NH₄⁺–N and NO₃^?–N in peat with a wide C:N ratio. In these boreal bogs, belowground N cycling is likely characterized by large DON pools that turn over relatively slowly and small DIN pools that turn over relatively rapidly. For Alberta bogs that have persisted at historically low N deposition values and begin to receive higher N deposition related to anthropogenic activities, peat N mineralization processes may be largely unaffected until the peat C:N ratio reaches a point that no longer favors immobilization of NH₄⁺–N and NO₃^?–N.     

Use of FT-IR Spectra and PCA to the Bulk Characterization of Cell Wall Residues of Fruits and Vegetables Along a Fraction Process

This study focuses on the analysis of polysaccharide residues from the cell walls of fruits and vegetables: tomato, potato, pumpkin, carrot and celery root. An alcohol-insoluble residue was prepared from plant material by extraction using the hot ethyl alcohol method and then cell wall fractions soluble in trans-1,2-diaminocyclohexane-N,N,N′,N′-tetraacetate, sodium carbonate and alkaline solution were sequentially extracted. Infrared spectroscopy combined with Fourier transform (FT-IR) was used to evaluate differences among cell wall residues and among species after each step of sequential extraction of pectins and hemicelluloses. Additionally, pectic substances were identified using an Automated Wet Chemistry Analyser. Principal component analysis (PCA) was applied to FT-IR spectra in two regions: 1,800–1,200 cm^?1 and 1,200–800 cm^?1 in order to distinguish different components of cell wall polysaccharides. This method also allowed us the possibility of highlighting the most important wavenumbers for each type of polysaccharide: 1,740, 1,610 and 1,240 cm^?1 denoting pectins or 1,370 and 1,317 cm^?1 denoting hemicelluloses and cellulose, respectively.     

Growth characteristics and reproductive capability of green tide algae in Rudong coast, China

Since 2007, green tides have occurred along the coast of the Yellow Sea, China. The green tide extended to 50,000 km² (floating area) within 2–3 months and the calculated covering area was about 400 km² in 2010. These facts implied that the growth and reproduction of the dominant species Ulva prolifera were stimulated. We observed that 1 cm² blades (single layer) released 2.84–6.62?×?10⁶ spores or 1.14–2.65?×?10⁷ gametes and that 91.6–96.4 % of them germinated into younger seedlings. This means that, in theory, 1 g (fresh weight) of blades was able to produce about 2.8?×?10⁸–2.7?×?10⁹ new younger seedlings. From 2009 to 2011, the growth rate of green tide algae was measured in situ in enclosure experiments in Rudong coast, Jiangsu Province and the growth curve of the algae was divided into four phases: lag phase, accelerated phase, stationary phase, and decline phase. Usually, the average daily specific relative growth rate was about 23.2–23.6 % d^?1 for a whole growth period, and it reached up to 56.2 % d^?1 in the accelerated phase. Correspondingly, the morphology of green tide algae in enclosures also showed periodic variation as follows: blades presented new filamentous branches from old thallus in the lag phase, longer filamentous branches in the accelerated phase, tubular and cystic blades in the stationary phase, and folded blades in the decline stage. Those studies may be useful for understanding the green tide blooming mechanism.     

Effect of food intake on left ventricular wall stress

Objective

Left ventricular wall stress has been investigated in a variety of populations, but the effect of food intake has not been evaluated. We assessed whether left ventricular wall stress is affected by food intake in healthy subjects.

Methods

Twenty-three healthy subjects aged 25.6?±?4.5 years were investigated. Meridional end-systolic wall stress (ESS) and circumferential end-systolic wall stress (cESS) were measured before, 30 minutes after, and 110 minutes after a standardised meal.

Results

Both ESS and cESS decreased significantly (P?<?0.001) from fasting values 30 minutes after the meal, and had not returned to baseline after 110 minutes. ESS decreased from 65?±?16 kdynes/cm² (fasting) to 44?±?12 kdynes/cm² 30 minutes after, and to 58?±?13 kdynes/cm² 110 minutes after eating. cESS decreased from 98?±?24 kdynes/cm² to 67?±?18 kdynes/cm² 30 minutes after, and to 87?±?19 kdynes/cm² 110 minutes after the meal.

Conclusion

This study shows that left ventricular wall stress is affected by food intake in healthy subjects.     

Combined effect of five single nucleotide polymorphisms related to IL23/Th17 pathway in the risk of psoriasis

Psoriasis is a common immune-mediated inflammatory skin disease with strong genetic components, in which the IL23/Th17 pathway has been implicated. To explore the effective role in psoriasis, we genotyped five single nucleotide polymorphisms in genes related to IL23/Th17 pathway in 14,929 Han Chinese samples. A Bonferroni-corrected significant single-variant association was identified between rs1512970 within IL21 (odds ratio (OR)?=?1.07, 95 % confidence interval (CI)?=?1.02–1.13, P?=?4.94?×?10^?03). We failed to validate rs744166 (OR?=?1.06, 95 % CI?=?1.01–1.11, P?=?1.52?×?10^?02) and other three SNPs (P?=?2.48?×?10^?01?～?1.27?×?10^?02) to meet the single-variant association significance threshold. However, we found that their combined effect substantially contributed to the risk of psoriasis in our sample (P?=?3.91?×?10^?07) and the highest score group conferred the largest risk effect size (OR?=?1.22, 95 % CI?=?1.11–1.34, P?=?1.85?×?10^?05). Our results implicate the ethnic heterogeneity in the susceptibility of psoriasis and suggest common variants with weak effect in IL23/Th17 pathway, which do not show significance in conventional single-variant association study, may contribute to the risk of psoriasis. This study sheds light on the important role of IL23/Th17 pathway in the susceptibility of psoriasis.