Speciation of ionic alkyllead compounds in human urine by gas chromatography–mass spectrometry after butylation through a Grignard reaction

One analytical procedure for the determination of ionic alkyllead in human urine has been studied. The system consists of the extraction of Me₃Pb⁺, Et₃Pb⁺ and Pb²⁺ at pH 9.0 with diethyldithiocarbamate to an organic phase. Then, the ionic compounds are butylated with BuMgCl and the final organic solution is analyzed by GC–MS–SIM. The elimination of both foam and gels in the extraction step and the general procedure for the urine are discussed. The recovery of compounds ranges from 105.1% for Me₃Pb⁺ to 97.2% for Et₃Pb⁺ using hexane as extracting agent and detection limits are 18.4 pg/ml of Me₃Pb⁺ and 19.2 pg/ml of Et₃Pb⁺ in urine. The speciation of ionic alkylleads in the urine of a petrol station worker showed a value of 27.9 pg/ml of Me₃Pb⁺ in urine and Et₃Pb⁺ was below the detection limit.     

High cytotoxicity and membrane permeability of Et3Pb+ in mammalian and plant cells

Cells of mammalian origin as well as those of higher plants appear to be very sensitive to triethyllead ion (Et₃Pb⁺). Neuroblastoma cells kept in the presence of 1 μM Et₃Pb⁺ lost their viability within 6 h. Growth of suspension culture cells of soybean (G. max(L.)Merr.) was inhibited by 1 μM Et₃Pb⁺, and finally the cells died. Morphologically, Et₃Pb⁺ caused the complete breakdown of microtubular structures in neuroblastoma cells; thus microtubules appeared to be the main target for the toxin. While in a previous study the effect of Et₃Pb⁺ on microtubules has been well documented at concentrations of 50–200 μM ¹, the present study demonstrates that the formation of microtubules from pig brain tubulin is disturbed at concentrations of Et₃Pb⁺ as low as 0.5 to 1 μM . We conclude from these data that Et₃Pb⁺ freely permeates the plasma membranes of mammalian as well as plant cells.     

Effect of High Dipole Moment Cation on Layered 2D Organic–Inorganic Halide Perovskite Solar Cells

Layered 2D organic–inorganic hybrid perovskite is appearing as a rising star in the photovoltaic field, thanks to its superior moisture resistance by the organic spacer cations. Unfortunately, these cations lead to high exciton binding energy in the 2D perovskites, which suffers from lower efficiency in the devices. It thus requires a clear criterion to select/design appropriate organic spacer cations to improve the device efficiency based on this class of materials. Here, 2,2,2‐trifluoroethylamine (F₃EA⁺) is introduced to combine with butylammonium (BA⁺) cations as mixed spacers. While BA⁺ enables self‐assembly of 2D perovskite crystals by van der Waals interaction, the introduction of F₃EA⁺ spacers with a high dipole moment suppress nonradiative recombination and promote separation of photogenerated electron–hole pairs by taking the advantage of electronegativity of fluorine. The resultant solar cells based on [(BA)_1–x(F₃EA)_x]₂(MA)₃Pb₄I₁₃ exhibit substantially increased open circuit voltage and fill factor compared with that of (BA)₂(MA)₃Pb₄I₁₃. The champion [(BA)_0.94(F₃EA)_0.06]₂(MA)₃Pb₄I₁₃ solar cell yields a power conversion efficiency of 12.51%, which is among the best performances so far. These findings suggest an effective strategy to design organic spacer cations in layered perovskite for solar cells and other optoelectronic applications.     

Efficient Perovskite Solar Cells Fabricated by Co Partially Substituted Hybrid Perovskite

In the past years, hybrid perovskite materials have attracted great attention due to their superior optoelectronic properties. In this study, the authors report the utilization of cobalt (Co²⁺) to partially substitute lead (Pb²⁺) for developing novel hybrid perovskite materials, CH₃NH₃Pb_1‐xCo_xI₃ (where x is nominal ratio, x = 0, 0.1, 0.2 and 0.4). It is found that the novel perovskite thin films possess a cubic crystal structure with superior thin film morphology and larger grain size, which is significantly different from pristine thin film, which possesses the tetragonal crystal structure, with smaller grain size. Moreover, it is found that the 3d orbital of Co²⁺ ensures higher electron mobilities and electrical conductivities of the CH₃NH₃Pb_1‐xCo_xI₃ thin films than those of pristine CH₃NH₃Pb₄ thin film. As a result, a power conversion efficiency of 21.43% is observed from perovskite solar cells fabricated by the CH₃NH₃Pb_0.9Co_0.1I₃ thin film. Thus, the utilization of Co, partially substituting for Pb to tune physical properties of hybrid perovskite materials provides a facile way to boost device performance of perovskite solar cells.     

Sorption of Heavy Metal Cations by Corn Mitochondria and the Effects on Electron and Energy Transfer Reactions

The passive sorption of Pb⁺², Cd⁺², Zn⁺², Co⁺², Ni⁺², and Mn⁺² by isolated corn mitochondria was determined, and, except for Pb⁺², the maximum sorption for each cation was about 58 nmol per milligram of protein. Sorption of Pb⁺² was apparently ten times greater, but precipitation may have been the cause of this larger value. The effects of Pb⁺², Cd⁺², Zn⁺², Co⁺², and Ni⁺² on acceptorless rates of electron transport for three substrates were determined. Greater than 50% inhibitions of oxidation were observed for succinate after additions of >0.1 mM Cd⁺², Zn⁺², or Pb⁺²: for NADH after additions of >0.5 mM Cd⁺² or Zn⁺²; and for malate + pyruvate after additions of >0.1 mM Cd⁺². Some inhibition of the rate of substrate oxidation was observed for most cations at higher concentrations. Coupling, as measured by ADP/O ratios, was inhibited at lowest concentrations by Cd⁺² or Zn⁺² and at higher concentrations by Co⁺² or Ni⁺². Substantial swelling of mitochondria oxidizing succinate was observed following additions of O.1 mM Cd⁺² or Pb⁺², Correlations are drawn between the effects of Pb⁺², Cd⁺², Zn⁺², Co⁺², and Ni⁺² and their sorption to mitochondrial membranes.     

Confining the sodium pump in a phosphoenzyme form: the effect of lead(II) ions

The effect of Pb²⁺ ions on the Na⁺,K⁺-ATPase was investigated in detail by means of steady-state fluorescence spectroscopy. Experiments were performed by using the electrochromic styryl dye RH421. It is shown that Pb²⁺ ions can bind reversibly to the protein and do not affect the Na⁺ and K⁺ binding affinities in the E₁ and P-E₂ conformations of the enzyme. The pH titrations indicate that lead(II) favors binding of one H⁺ to the P-E₂ conformation in the absence of K⁺. A model scheme is proposed that accounts for the experimental results obtained for backdoor phosphorylation of the enzyme in the presence of Pb²⁺ ions. Taken together, our results clearly indicate that Pb²⁺ bound to the enzyme stabilizes an E₂-type conformation. In particular, under conditions that promote enzyme phosphorylation, Pb²⁺ ions are able to confine the Na⁺,K⁺-ATPase into a phosphorylated E₂ state.     

Long-term stability of a biofilter treating dimethyl sulphide

 The biofiltration of dimethyl sulphide (Me₂S) and other volatile sulphur compounds results in the accumulation of the metabolite sulphuric acid in the carrier material. Regeneration of an acidified (pH 4.7), Hyphomicrobium-MS3-inoculated compost biofilter degrading Me₂S was not possible by trickling tap water (days 0–28) or a KH₂PO₄/K₂HPO₄ buffer solution (1.26 g PO^3- ₄ l^-1, pH 7) (days 29–47) over the bioreactor at a superficial liquid flow rate of 34 lm^-2 day^-1. Since the protons produced displaced nutrient cations (Na⁺, K⁺, Ca²⁺, Mg²⁺, NH⁺ ₄) from the cation-exchange sites on the compost material, 95% of the SO^2- ₄ was leached as the corresponding sulphate salts and not as sulphuric acid. Concomitantly, the pH of the compost material decreased from 4.7 to 3.9 over the 47 days rinsing period. Moreover, the rinsing procedure resulted in the leaching of essential microbial nutrients from the compost material, such as NH⁺ ₄ (22.3% wash-out over the 47-day rinsing period) and PO^3- ₄ (39.3% washout over the 28-day tap-water rinsing period). However, mixing limestone powder into the Me₂S-degrading compost biofilter was a successful approach to controlling the pH in the optimal range for the inoculum Hyphomicrobium MS3 (pH 6–7). A stoichiometric neutralisation reaction (molar ratio CaCO₃/H₂SO₄=1.1) was observed between the CaCO₃ added and the metabolite of the Me₂S degradation, while high elimination capacities (above 100 g Me₂S m^-3 day^-1) were obtained over a prolonged (more than 100 days) period. Received: 1 December 1995/Received revision: 26 April 1995 Accepted: 29 April 1996     

Characteristics of 3-O-methylfluorescein phosphate hydrolysis by the (Na+ + K+)-ATPase

With 3-O-methylfluorescein phosphate (3-OMFP) as substrate for the phosphatase reaction catalyzed by the (Na⁺ + K⁺)-ATPase, a number of properties of that reaction differ from those with the common substratep-nitrophenyl phosphate (NPP): theK _m is 2 orders of magnitude less and the V_max is two times greater, and dimethyl sulfoxide (Me₂SO) inhibits rather than stimulates. In addition, reducing the incubation pH decreases both theK _m and V_max for K⁺-activated 3-OMFP hydrolysis as well as theK _0.5 for K⁺ activation. However, reducing the incubation pH increases inhibition by P_i and the V_max for 3-OMFP hydrolysis in the absence of K⁺. When choline chloride is varied reciprocally with NaCl to maintain the ionic strength constant, NaCl inhibits K⁺-activated 3-OMFP hydrolysis modestly with 10 mM KCl, but stimulates (in the range 5–30 mM NaCl) with suboptimal (0.35 mM) KCl. In the absence of K⁺, however, NaCl stimulates increasingly over the range 5–100 mM when the ionic strength is held constant. These observations are interpreted in terms of (a) differential effects of the ligands on enzyme conformations; (b) alternative reaction pathways in the absence of Na⁺, with a faster, phosphorylating pathway more readily available to 3-OMFP than to NPP; and (c) a (Na⁺ + K⁺)-phosphatase pathway, most apparent at suboptimal K⁺ concentrations, that is also more readily available to 3-OMFP.Abbreviations Et₃N triethyl amine - FITC fluorescein isothiocyanate - HEPES N-2-hydroxyethylpiperazine-N-2-ethanesulfonate - MES 2-(N-morpholino)ethanesulfonate - Me₂SO dimethyl sulfoxide - NPP p-nitrophenyl phosphate - 3-OMFP 3-O-methylfluorescein phosphate - TNP-ATP 2, (or 3)-O-(2,4,6-trinitrophenyl)-ATP     

Biosorption of Cd, Cu, Pb, and Zn from aqueous solutions by the fruiting bodies of jelly fungi (Tremella fuciformis and Auricularia polytricha)

In this study, dried and humid fruiting bodies of Tremella fuciformis and Auricularia polytricha were examined as cost-effective biosorbents in treatment of heavy metals (Cd²⁺, Cu²⁺, Pb²⁺, and Zn²⁺) in aqueous solution. The humid T. fuciformis showed the highest capacity to adsorb the four metals in the multi-metal solutions. The Pb²⁺ adsorption rates were 85.5%, 97.8%, 84.8%, and 91.0% by dried T. fuciformis, humid T. fuciformis, dried A. polytricha, and humid A. polytricha, respectively. The adsorption amount of Pb²⁺ by dried and humid T. fuciformis in Cd²⁺ + Pb²⁺, Cu²⁺ + Pb²⁺, Pb²⁺ + Zn²⁺, Cd²⁺ + Cu²⁺ + Pb²⁺, and Cd²⁺ + Zn²⁺ + Pb²⁺ solutions were not lower than that in Pb²⁺ solutions. The results suggested that in humid T. fuciformis, Cd²⁺, Cu²⁺, and Zn²⁺ promoted the Pb²⁺ adsorption by the biomass. In the multi-metal solutions of Cd²⁺ + Cu²⁺ + Pb²⁺ + Zn²⁺, the adsorption amount and rates of the metals by all the test biosorbents were in the order of Pb²⁺ > Cu²⁺ > Zn²⁺ > Cd²⁺. Compared with the pseudo first-order model, the pseudo second-order model described the adsorption kinetics much better, indicating a two-step biosorption process. The present study confirmed that fruiting bodies of the jelly fungi should be useful for the treatment of wastewater containing Cd²⁺, Cu²⁺, Pb²⁺, and Zn²⁺.     

Production of hydrogen peroxide by aryl-alcohol oxidase from the ligninolytic fungusPleurotus eryngii

Summary Production of extracellular hydrogen peroxide by fungal oxidases is been investigated as a requirement for lignin degradation. Aryl-alcohol oxidase activity is described in extracellular liquid and mycelium ofPleurotus eryngii and studied under non-limiting nitrogen conditions. This aryl-alcohol oxidase catalyses conversion of primary aromatic alcohols to the corresponding aldehydes and H₂O₂, showing no activity with aliphatic and secondary aromatic alcohols. The enzyme is stable at pH 4.0–9.0, has maximal activity at 45°–50°C and pH 6.0–6.5, is inhibited by Ag⁺, Pb²⁺ and NaN₃, and has aK _m of 1.2 mM using veratryl alcohol as substrate. A single protein band with aryl-alcohol oxidase activity was found in zymograms of extracellular and intracellular crude enzyme preparations fromP. eryngii.     

Block of the sheep cardiac sarcoplasmic reticulum Ca2+-release channel by tetra-alkyl ammonium cations

Summary The purified ryanodine receptor channel of the sheep cardiac muscle sarcoplasmic reticulum (SR) membrane functions as a calcium-activated cation-selective channel under voltage-clamp conditions following reconstitution into planar phospholipid bilayers. We have investigated the effects of the tetra-alkyl ammonium (TAA) cations, (C _n H_2n+1)₄N⁺ and the trimethyl ammonium cations, ethyltrimethyl ammonium and propyltrimethyl ammonium, on potassium conductance through the receptor channel. Small TAA cations (n = 1–3) and the trimethyl ammonium derivatives act as asymmetric, voltage-dependent blockers of potassium current. Quantitative analysis of the voltage dependence of block indicates that the conduction pathway of the sheep cardiac SR ryanodine receptor channel contains two distinct sites for the interaction of these small organic cations. Sites are located at approximately 50% for tetramethyl ammonium (TMA ⁺) and 90% for tetraethyl ammonium (TEA⁺) and tetrapropyl ammonium (TPrA⁺) of the voltage drop across the channel from the cytosolic face of the protein. The chemical substitution of an ethyl or propyl group for one of the methyl groups in TMA⁺ increases the voltage dependence of block to a level similar to that of TEA ⁺ and TPrA⁺. The zero-voltage dissociation constant (K _b(0)) falls with the increasing number of methyl and methylene groups for those blockers acting 90% of the way across the voltage drop. This is interpreted as suggesting a hydrophobic binding site at this point in the conduction pathway. The degree of block increases as the concentration of small TAA cations is raised. The concentration dependence of tetraethyl ammonium block indicates that the cation interacts with a single site within the conduction pathway with a K _m of 9.8±1.7 mm (mean±sd) at 40 mV. Larger TAA cations (n = 4–5) do not induce voltage-dependent block of potassium current of the form seen with the smaller TAA cations. These data support the contention that the sheep cardiac SR ryanodine receptor channel may be occupied by at most one ion at a time and suggest that a large proportion of the voltage drop falls over a relatively wide region of the conduction pathway.This work was supported by funds from the Medical Research Council and the British Heart Foundation. We would like to thank Richard Montgomery for his considerable help with the chemical synthesis. We are grateful to Drs. John Chambers, Nick Price and staff for showing us the intricacies of NMR spectroscopy.     

Purification of glucose‐6‐phosphate dehydrogenase from rat (Rattus norvegicus) erythrocytes and inhibition effects of some metal ions on enzyme activity

Glucose‐6‐phosphate dehydrogenase (G6PD) is the first enzyme on which the pentose phosphate pathway was checked. In this study, purification of a G6PD enzyme was carried out by using rat erythrocytes with a specific activity of 13.7 EU/mg and a yield of 67.7 and 155.6‐fold by using 2′,5′‐ADP Sepharose‐4B affinity column chromatography. For the purpose of identifying the purity of enzyme and molecular mass of the subunit, a sodium dodecyl sulfate‐polyacrylamide gel electrophoresis was carried out. The molecular mass of subunit was calculated 56.5 kDa approximately. Then, an investigation was carried out regarding the inhibitory effects caused by various metal ions (Fe²⁺, Pb²⁺, Cd²⁺, Ag⁺, and Zn²⁺) on G6PD enzyme activities, as per Beutler method at 340 nm under in vitro conditions. Lineweaver–Burk diagrams were used for estimation of the IC₅₀ and K_i values for the metals. K_i values for Pb⁺², Cd⁺², Ag⁺, and Zn⁺² were 113.3, 215.2, 19.4, and 474.7 μM, respectively.     

Stabilities of complexes formed between lead(II) and simple phosphonate or phosphate monoester ligands including some pyrimidine-nucleoside 5′-monophosphates (CMP2–, UMP2–, dTMP2–)

 The stability constants of the 1 : 1 complexes formed between Pb²⁺ and several simple phosphate monoesters (4-nitrophenyl phosphate, phenyl phosphate, d-ribose 5-monophosphate, n-butyl phosphate) or phosphonate ligands (methylphosphonate, ethylphosphonate) (R-PO^2– ₃) were determined by potentiometric pH titrations in aqueous solution (25  °C;I=0.1 M, NaNO₃). The construction of a log K ^P _P ^b _b(R-PO3) versus pK ^H _H(R-PO3) plot for the mentioned ligand systems results in a straight line on which the data pairs (the corresponding equilibrium constants were also measured) for uridine 5′-monophosphate (UMP^2–) and thymidine 5′-monophosphate (dTMP^2–) also fall; this result shows that in the Pb²⁺ complexes of UMP^2– and dTMP^2– the nucleobase residues do not interfere, in neither a positive nor a negative way, with the binding of Pb²⁺ and that the stability of all these complexes is determined by the basicity of the phosph(on)ate group. The mentioned straight-line correlation (as defined by the least-squares procedure) allowed us to demonstrate (via constants determined now) that the stability of the Pb²⁺ complex of cytidine 5′-monophosphate (CMP^2–) is also solely determined by the basicity of its phosphate group. A similar evaluation, based on literature data, for the Pb(HPO₄) complex reveals that its stability corresponds closely to the expectations based on the Pb(R-PO₃) data, though there is a slight hint that Pb(HPO₄) may be somewhat more stable [which would be in agreement with previous observations of other M(HPO₄) complexes]; clearly, more such comparisons are possible with the reference line given now. Based on the stability constants of the monoprotonated Pb(H;CMP)⁺ complex and the Pb(cytidine)²⁺ species (which was also measured now), it is concluded that in Pb(H;CMP)⁺ the proton is located at the phosphate group and Pb²⁺ mainly at the N3/(C2)O site of the cytosine residue. Regarding nucleic acids in solution, it is further concluded that the affinity of Pb²⁺ towards the negatively mono-charged phosphate unit, —O—P(O)₂ ^–—O—, of a nucleic acid backbone is comparable to that of the cytosine moiety, the affinity towards other nucleobase residues being smaller. This information may prove helpful regarding the properties of lead ribozymes. Received: 16 April 1999 / Accepted: 2 June 1999     

Improved Bulk Materials with Thermoelectric Figure‐of‐Merit Greater than 1: Tl10–xSnxTe6 and Tl10–xPbxTe6

Noting the steadily worsening problem of depleted fossil fuel sources, alternate energy sources have become increasingly important; these include thermoelectrics, which may use waste heat to generate electricity. To be economically viable, the thermoelectric figure‐of‐merit, zT, which is related to the energy conversion efficiency, needs to be in excess of unity (zT > 1). Tl₄SnTe₃ and Tl₄PbTe₃ were reported to attain a thermoelectric figure‐of‐merit zT _max = 0.74 and 0.71, respectively, at 673 K. Here, the thermoelectric properties of both materials are presented as a function of x in Tl_10–x Sn _x Te₆ and Tl_10–x Pb _x Te₆, with x varying between 1.9 and 2.05, culminating in zT values in excess of 1.2. These materials are charge balanced when x = 2, according to (Tl⁺)₈(Sn²⁺)₂(Te^2?)₆ and (Tl⁺)₈(Pb²⁺)₂(Te^2?)₆ (or: (Tl⁺)₄Pb²⁺(Te^2?)₃). Increasing x causes an increase in valence electrons, and thus a decrease in the dominating p‐type charge carriers. Larger x values occur with a smaller electrical conductivity and a larger Seebeck coefficient. In each case, the lattice thermal conductivity remains under 0.5 W m^?1 K^?1, resulting in several samples attaining the desired zT _max > 1. The highest values thus far are exhibited by Tl_8.05Sn_1.95Te₆ with zT = 1.26 and Tl_8.10Pb_1.90Te₆ with zT = 1.46 around 685 K.     

Modulation of Na+ transport across leech skin by pesticides and heavy metals

The aim of the present study was to investigate the effects of environmental pollutants, such as heavy metals and pesticides on ion transport across the skin of the leech (Hirudo medicinalis). We wanted to examine the suitability of this epithelium as a model system for studies concerning the mechanisms of toxic action caused by environmental pollutants. For this purpose we performed Ussing chamber experiments to test three representative heavy metals and pesticides, respectively, for their effects on current flow across leech dorsal integument. Two representatives of each substance class showed distinct effects on ion transport across this epithelium. The heavy metal ions Pb²⁺ and Hg²⁺ produced a significant inhibition of amiloride-sensitive Na⁺ transport across leech skin in concentrations below or close to their limiting values in waste water. Therefore, it seems feasible to use leech skin for future investigations of the toxic actions of these heavy metals. The fact that Pb²⁺ and Hg²⁺ exerted their effects only when applied apically points to a specific action of these divalent cations on ion channels in the apical membrane. However, this inhibition does not seem to be a general feature of divalent cations because Cd²⁺ did not influence ion transport across leech skin at all. Since current flow through amiloride-sensitive Na⁺ channels in typical vertebrate tight epithelia is stimulated by numerous divalent cations, the pronounced inhibition of amiloride-sensitive Na⁺ channels in leech skin by Pb²⁺ and Hg²⁺ might lead to a further differentiation of amiloride-sensitive Na⁺ channels. The two widespread pesticides lindane and promecarb exerted their effects only at comparativ high concentrations. This low sensitivity restricts the usefulness of leech skin as a subject for further analysis of toxicity mechanisms, at least for these two pesticides.     

The Spacer Cations Interplay for Efficient and Stable Layered 2D Perovskite Solar Cells

Organic spacer cations in layered 2D (A₁)₂(A₂)_n?1B_nX_3n+1 (where A₁ is an organic cation acting as a spacer between the perovskite layers, A₂ is a monovalent cation, e.g., Cs⁺,CH₃NH₃⁺, CH(NH₂)₂⁺) perovskite materials improve the long‐term stability of the resulting solar cells, but hamper their power conversion efficiency due to poor carrier generation/transportation. Rational guidelines are thus required to enable the design of organic spacer cations. Herein, mixed A₁ cations are employed in layered 2D perovskites to investigate the interplay between alkylamine cations and unsaturated alkylamine cations. It is revealed that alkylamine spacer cations are able to facilitate precursor assembly, which results in the orientated growth of perovskite crystals. Unsaturated alkylamine cations further lead to reduced exciton binding energy, which improves carrier pathway in the 2D perovskites. By mixing both cations, substantially improved open circuit voltage is observed in the resultant photovoltaic cells with the efficiency of 15.46%, one of the highest one based on (A₁)₂(A₂)₃Pb₄I₁₃ layered 2D perovskites. The generality of the design principle is further extended to other cation combinations.     

FTIR, Raman, and UV-Vis spectroscopic and DFT investigations of the structure of iron-lead-tellurate glasses

In this work, the effects of iron ion intercalations on lead–tellurate glasses were investigated via FTIR, Raman and UV-Vis spectroscopies. This homogeneous glass system has compositions xFe₂O₃·(100−x)[4TeO₂·PbO₂], where x = 0–60 mol%. The presented observations in these mechanisms show that the lead ions have a pronounced affinity towards [TeO₃] structural units, resulting in the deformation of the Te–O–Te linkages, and leading to the intercalation of [PbO _n ] (n = 3, 4) and [FeO _n ] (n = 4, 6) entities in the [TeO₄] chain network. The formation of negatively charged [FeO₄]¹⁻ structural units implies the attraction of Pb²⁺ ions in order to compensate for this electrical charge. Upon increasing the Fe₂O₃ content to 60 mol%, the network can accommodate an excess of oxygen through the formation of [FeO₆] structural units and the conversion of [TeO₄] into [TeO₃] structural units. For even higher Fe₂O₃ contents, Raman spectra indicate a greater degree of depolymerization of the vitreous network than FTIR spectra do. The bands due to the Pb–O bond vibrations are very strongly polarized and the [TeO₄] structural units convert into [TeO₃] units via an intermediate coordination stage termed “[TeO₃₊₁]” structural units. Our UV-Vis spectroscopic data show two mechanisms: (i) the conversion of the Fe³⁺ to Fe²⁺ at the same time as the oxidation of Pb²⁺ to Pb⁺⁴ ions for samples with low Fe₂O₃ contents; (ii) when the Fe₂O₃ content is high (x ≥ 50 mol%), the Fe²⁺ ions capture positive holes and are transferred to Fe³⁺ ions through a photochemical reaction, while the Pb²⁺ ions are formed by the reduction of Pb⁴⁺ ions. DFT calculations show that the addition of Fe₂O₃ to lead–tellurate glasses seems to break the axial Te–O bonds, and the [TeO₄] structural units are gradually transformed into [TeO₃₊₁]- and [TeO₃]-type polyhedra. Analyzing these data further indicates a gradual conversion of the lead ions from covalent to ionic environment. There is then a charge transfer between the tri- and tetracoordinated tellurium atoms due to the capacity of the lead–tellurate network to form the appropriate coordination environments containing structural units of opposite charge, such as iron ions, [FeO₄]¹⁻.     

Uptake and accumulation of lead by roots,hypocotyls and shoots of Indian mustard [Brassica juncea (L.)]

The effects of different concentrations of lead nitrate on root, hypocotyl and shoot growth of Indian mustard (Brassica juncea var. Megarrhiza), and the uptake and accumulation of Pb²⁺ by its roots, hypocotyls and shoots were investigated in the present study. The concentrations of lead nitrate (Pb(NO₃)₂) used were in the range of 10⁻⁵–10⁻³ M. Root growth decreased progressively with increasing concentration of Pb²⁺ in solutions. The seedlings exposed to 10⁻³ M Pb exhibited substantial growth reduction and produced chlorosis. Brassica juncea has considerable ability to remove Pb from solutions and accumulate it. The Pb content in roots of B. juncea increased with increasing solution concentration of Pb²⁺. The amount of Pb in roots of plants treated with 10⁻⁴, 10⁻³ and 10⁻⁵ M Pb²⁺ were 184-, 37- and 6-fold, respectively, greater than that of roots of the control plant. However, the plants transported and concentrated only a small amount of Pb in their hypocotyls and shoots, except for the group treated with 10⁻³ M Pb²⁺.     

Isobutyraldehyde as a competitor of the dimethyl sulfide degrading activity in biofilters

Upon inoculation with Hyphomicrobium MS3, theelimination capacity of a lab-scale biofilter for theodorant dimethyl sulfide (Me₂S) can be stronglyincreased from less than 10 to more than 35 and 1000 gm^-3d^-1 using wood bark and compost as acarrier material, respectively. However, uponsupplementation of isobutyraldehyde (IBA) as a secondgaseous substrate, sequential degradation profiles of IBAand Me₂S in physically separated sections wereobserved in the Hyphomicrobium MS3-inoculatedwood bark and compost biofilters. Contrary to this, thebiofiltration efficiency for Me₂S remainedunaffected upon the supplementation of toluene as asecond gaseous substrate. Batch experiments with theliquid Hyphomicrobium MS3 culture confirmed thecompetitive effect of IBA on the Me₂S degradingactivity: in the presence of both compounds, Hyphomicrobium MS3 preferred degradation of thecarbonyl compound. In technical terms, this means thatthe complete purification of a waste gas stream containingboth IBA and Me₂S should be performed usingsufficiently high or bistage HyphomicrobiumMS3-inoculated biofilters. Design criteria have to beconceived in this respect.     

Infrared and Mössbauer studies on adducts R3SnOH · R3MX (M = Sn,Pb; X = Pseudohalide)

The synthesis of the solid adducts Me₃SnOH · Me₃ SnNCO, Me₃SnOH · Me₃SnNCS, Me₃SnOH · Me₃PbN₃, Ph₃SnOH · Ph₃SnN₃ is reported. The compounds have been investigated by infrared and Mössbauer spectroscopy. Their structure probably consists of polymeric OH-R₃Sn-X-R₃Sn(Pb) chains in which hydroxyl and pseudohalide (X) groups are bridging pentacoordinate tin atoms. In contrast to the triphenyl compound, the trimethyl derivatives show evidence of hydrogen bonding between adjacent chains.