Imaging polysaccharides by atomic force microscopy

Techniques have been developed for the routine reliable imaging of polysaccharides by atomic force microscopy (AFM). The polysaccharides are deposited from aqueous solution onto the surface of freshly cleaved mica, air dried, and then imaged under alcohols. The rationale behind the development of the methodology is described and data is presented for the bacterial polysaccharides xanthan, acetan, and the plant polysaccharides 1-carrageenan and pectin. Studies on uncoated polysaccharides have demonstrated the improved resolution achievable when compared to more traditional metal-coated samples or replicas. For acetan the present methodology has permitted imaging of the helical structure. Finally, in addition to data obtained on individual polysaccharides, AFM images have also been obtained of the network structures formed by κ-carrageenan and gellan gum. © 1996 John Wiley & Sons, Inc.     

Hierarchical assembly of beta2-microglobulin amyloid in vitro revealed by atomic force microscopy

The kinetics of spontaneous assembly of amyloid fibrils of wild-type beta(2)-microglobulin (beta(2)M) in vitro, under acid conditions (pH 2.5) and low ionic strength, has been followed using thioflavin-T (ThT) binding. In parallel experiments, the morphology of the different fibrillar species present at different time-points during the growth process were characterised using tapping-mode atomic force microscopy (TM-AFM) in air and negative stain electron microscopy (EM). The thioflavin-T assay shows a characteristic lag phase during which the nucleation of fibrils occurs before a rapid growth in fibril density. The volume of fibrils deposited on mica measured from TM-AFM images at each time-point correlates well with the fluorescence data. TM-AFM and negative-stain EM revealed the presence of various kinds of protein aggregates in the lag phase that disappear concomitantly with a rise in the density of amyloid fibrils, suggesting that these aggregates precede fibril growth and may act as nucleation sites. Three distinct morphologies of mature amyloid fibrils were observed within a single growth experiment, as observed previously for the wild-type protein and the variant N17D. Additional supercoiled morphologies of the lower-order fibrils were observed. Comparative height analysis from the TM-AFM data allows each of the mature fibril types and single protofilaments to be identified unambiguously, and reveals that the assembly occurs via a hierarchy of morphological states.     

Ultrastructural organization of amyloid fibrils by atomic force microscopy

Atomic force microscopy has been employed to investigate the structural organization of amyloid fibrils produced in vitro from three very different polypeptide sequences. The systems investigated are a 10-residue peptide derived from the sequence of transthyretin, the 90-residue SH3 domain of bovine phosphatidylinositol-3'-kinase, and human wild-type lysozyme, a 130-residue protein containing four disulfide bridges. The results demonstrate distinct similarities between the structures formed by the different classes of fibrils despite the contrasting nature of the polypeptide species involved. SH3 and lysozyme fibrils consist typically of four protofilaments, exhibiting a left-handed twist along the fibril axis. The substructure of TTR(10-19) fibrils is not resolved by atomic force microscopy and their uniform appearance is suggestive of a regular self-association of very thin filaments. We propose that the exact number and orientation of protofilaments within amyloid fibrils is dictated by packing of the regions of the polypeptide chains that are not directly involved in formation of the cross-beta core of the fibrils. The results obtained for these proteins, none of which is directly associated with any human disease, are closely similar to those of disease-related amyloid fibrils, supporting the concept that amyloid is a generic structure of polypeptide chains. The detailed architecture of an individual fibril, however, depends on the manner in which the protofilaments assemble into the fibrillar structure, which in turn is dependent on the sequence of the polypeptide and the conditions under which the fibril is formed.     

Strikingly different effects of cholesterol and 7-ketocholesterol on lipid bilayer-mediated aggregation of amyloid beta (1-42)

Oxidized cholesterol has been widely reported to contribute to the pathogenesis of Alzheimer's disease (AD). However, the mechanism by which they affect the disease is not fully understood. Herein, we aimed to investigate the effect of 7-ketocholesterol (7keto) on membrane-mediated aggregation of amyloid beta (Aβ-42), one of the critical pathogenic events in AD. We have shown that when cholesterol is present in lipid vesicles, kinetics of Aβ nuclei formation is moderately hindered while that of fibril growth was considerably accelerated. The partial substitution of cholesterol with 7keto slightly enhanced the formation of Aβ-42 nuclei and remarkably decreased fibril elongation, thus maintaining the peptide in protofibrillar aggregates, which are reportedly the most toxic species. These findings add in understanding of how cholesterol and its oxidation can affect Aβ-induced cytotoxicity.     

Imaging biomolecule arrays by atomic force microscopy.

We describe here a method for constructing ordered molecular arrays and for detecting binding of biomolecules to these arrays using atomic force microscopy (AFM). These arrays simplify the discrimination of surface-bound biomolecules through the spatial control of ligand presentation. First, photolithography is used to spatially direct the synthesis of a matrix of biological ligands. A high-affinity binding partner is then applied to the matrix, which binds at locations defined by the ligand array. AFM is then used to detect the presence and organization of the high-affinity binding partner. Streptavidin-biotin arrays of 100 x 100 microns and 8 x 8 microns elements were fabricated by this method. Contact and noncontact AFM images reveal a dense lawn of streptavidin specific to the regions of biotin derivatization. These protein regions are characterized by a height profile of approximately 40 A over the base substrate with a 350-nm edge corresponding to the diffraction zone of the photolithography. High resolution scans reveal a granular topography dominated by 300 A diameter features. The ligand-bound protein can then be etched from the substrate using the AFM tip, leaving an 8 A shelf that probably corresponds to the underlying biotin layer.     

Imaging the RecA-DNA complex by atomic force microscopy.

Atomic force microscopy (AFM) was applied to study the RecA protein and its complexes with DNA in air and in aqueous solution. RecA and DNA were reacted under several conditions, and deposited onto a mica substrate pre-treated in various ways. We found that the structure of the RecA and RecA-DNA complexes, especially the height of the molecules, was affected by the sample preparation method such as gel filtration, and environment during imaging.     

Imaging erythrocytes under physiological conditions by atomic force microscopy

Since its invention in the mid 1980s atomic force microscopy has revolutionised the way in which surfaces can be imaged. Close to atomic resolution has been achieved for some materials and numerous images of molecules on surfaces have been recorded. Atomic force microscopy has also been of benefit to biology where protein molecules on surfaces have been studied and even whole cells have been investigated. Here we report a study of red blood cells which have been imaged in a physiological medium. At high resolution, the underlying cytoskeleton of the blood cell has been resolved and flaws in the cytoskeleton structure may be observed. Comparison of the normal 'doughnut' shaped cells with swollen cells has been undertaken. Differences in both the global properties of the cells and in the local features in cytoskeleton structure have been observed.     

Mechanical manipulation of Alzheimer's amyloid beta1-42 fibrils

The 39- to 42-residue-long amyloid beta-peptide (Abeta-peptide) forms filamentous structures in the neuritic plaques found in the neuropil of Alzheimer's disease patients. The assembly and deposition of Abeta-fibrils is one of the most important factors in the pathogenesis of this neurodegenerative disease. Although the structural analysis of amyloid fibrils is difficult, single-molecule methods may provide unique insights into their characteristics. In the present work, we explored the nanomechanical properties of amyloid fibrils formed from the full-length, most neurotoxic Abeta1-42 peptide, by manipulating individual fibrils with an atomic force microscope. We show that Abeta-subunit sheets can be mechanically unzipped from the fibril surface with constant forces in a reversible transition. The fundamental unzipping force (approximately 23 pN) was significantly lower than that observed earlier for fibrils formed from the Abeta1-40 peptide (approximately 33 pN), suggesting that the presence of the two extra residues (Ile and Ala) at the peptide's C-terminus result in a mechanical destabilization of the fibril. Deviations from the constant force transition may arise as a result of geometrical constraints within the fibril caused by its left-handed helical structure. The nanomechanical fingerprint of the Abeta1-42 is further influenced by the structural dynamics of intrafibrillar interactions.     

High-speed atomic force microscopy: Imaging and force spectroscopy

Atomic force microscopy (AFM) is the type of scanning probe microscopy that is probably best adapted for imaging biological samples in physiological conditions with submolecular lateral and vertical resolution. In addition, AFM is a method of choice to study the mechanical unfolding of proteins or for cellular force spectroscopy. In spite of 28 years of successful use in biological sciences, AFM is far from enjoying the same popularity as electron and fluorescence microscopy. The advent of high-speed atomic force microscopy (HS-AFM), about 10 years ago, has provided unprecedented insights into the dynamics of membrane proteins and molecular machines from the single-molecule to the cellular level. HS-AFM imaging at nanometer-resolution and sub-second frame rate may open novel research fields depicting dynamic events at the single bio-molecule level. As such, HS-AFM is complementary to other structural and cellular biology techniques, and hopefully will gain acceptance from researchers from various fields. In this review we describe some of the most recent reports of dynamic bio-molecular imaging by HS-AFM, as well as the advent of high-speed force spectroscopy (HS-FS) for single protein unfolding.     

Interaction of calreticulin with amyloid beta peptide 1-42

The interaction of calreticulin with amyloid beta (Abeta) was investigated using solid phase and solution binding assays. Calreticulin bound Abeta 1-42 in a time and concentration dependent fashion. The binding was optimal at pH 5 and was stimulated by Ca2+ and inhibited by Zn2+ at pH 7. Interaction took place through the hydrophobic C-terminus of Abeta 1-42 and the polypeptide binding site of calreticulin. The results are discussed in the light of a reported role of calreticulin as a cell surface scavenger receptor.     

Annular oligomeric amyloid intermediates observed by in situ atomic force microscopy

Amyloidoses and related protein deposition diseases involve the transformation of normally soluble proteins into insoluble deposits, usually fibrillar in nature. Although it was originally assumed that the fibrils were the toxic species, this assumption has recently been called into question. Accumulating evidence in several systems suggests that oligomeric intermediates on the aggregation pathway may be toxic. In the present study we used in situ atomic force microscopy to monitor aggregation in aqueous solution in real time. The sample used was an amyloidogenic immunoglobulin light chain, involved in AL or light chain amyloidosis. The nature of the observed oligomeric intermediates was dependent on the conditions of incubation, especially pH and ionic strength. Several different aggregation intermediates with a variety of morphologies, including annular or torus-shaped species, were observed. The data indicate that protein aggregation can be very complex, involving a variety of different oligomeric intermediates whose population will be determined by the kinetic and thermodynamic competition between them.     

Imaging surface of gold-immunolabeled thin sections by atomic force microscopy

Atomic force microscopy (AFM) has been used to image the surface of thin sections of fungal infected plant tissue, with or without post-embedding immunocytochemical labeling with gold conjugates. Plant and fungal cells are easily identified from their size, shape and roughness. The cellular shape is similar to that observed by light or electron microscopy (LM or EM) and some internal organelles can even be individualized. The gold beads are easily observed and counted. Their dimensions varied according to the roughness of the surface, but fit with the expected sizes.     

Prostaglandin H2 (PGH2) accelerates formation of amyloid beta1-42 oligomers

Epidemiologic evidence implicates cyclooxygenase activity in the pathogenesis of Alzheimer's disease, in which amyloid plaques have been found to contain increased levels of dimers and higher multimers of the amyloid beta peptide. The product of the oxygenation of arachidonic acid by the cyclooxygenases, prostaglandin H2 (PGH2), rearranges non-enzymatically to several prostaglandins, including the highly reactive gamma-keto aldehydes, levuglandins E2 and D2. We demonstrate that PGH2 markedly accelerates the formation of dimers and higher oligomers of amyloid beta1-42. This is associated with the formation of levuglandin adducts of the peptide. These findings provide the molecular basis for a hypothesis linking cyclooxygenase activity to the formation of oligomers of amyloid beta.     

High-resolution atomic force microscopy of soluble Abeta42 oligomers

Soluble oligomers and protofibrils are widely thought to be the toxic forms of the Abeta42 peptide associated with Alzheimer's disease. We have investigated the structure and formation of these assemblies using a new approach in atomic force microscopy (AFM) that yields high-resolution images of hydrated proteins and allows the structure of the smallest molecular weight (MW) oligomers to be observed and characterized. AFM images of monomers, dimers and other low MW oligomers at early incubation times (< 1h) are consistent with a hairpin structure for the monomeric Abeta42 peptide. The low MW oligomers are relatively compact and have significant order. The most constant dimension of these oligomers is their height (approximately 1-3 nm) above the mica surface; their lateral dimensions (width and length) vary between 5 nm and 10nm. Flat nascent protofibrils with lengths of over 40 nm are observed at short incubation times (< or = 3h); their lateral dimensions of 6-8 nm are consistent with a mass-per-length of 9 kDa/nm previously predicted for the elementary fibril subunit. High MW oligomers with lateral dimensions of 15-25 nm and heights ranging from 2-8 nm are common at high concentrations of Abeta. We show that an inhibitor designed to block the sheet-to-sheet packing in Abeta fibrils is able to cap the heights of these oligomers at approximately 4 nm. The observation of fine structure in the high MW oligomers suggests that they are able to nucleate fibril formation. AFM images obtained as a function of incubation time reveal a sequence of assembly from monomers to soluble oligomers and protofibrils.     

Assessing mutant huntingtin fragment and polyglutamine aggregation by atomic force microscopy

Huntington disease (HD), a neurodegenerative disorder, is caused by an expansion of more than 35-40 polyglutamine (polyQ) repeats located near the N-terminus of the huntingtin (htt) protein. The expansion of the polyQ domain results in the ordered assembly of htt fragments into fibrillar aggregates that are the main constituents of inclusion bodies, which are a hallmark of the disease. This paper describes protocols for studying the aggregation of mutant htt fragments and synthetic polyQ peptides with atomic force microscopy (AFM). Ex situ AFM is used to characterize aggregate formation in protein incubation as a function of time. Methods to quickly and unambiguously distinguish specific aggregate species from complex, heterogeneous aggregation reactions based on simple morphological features are presented. Finally, the application of time lapse atomic force microscopy in solution is presented for studying synthetic model polyQ peptides, which allows for tracking the formation and fate of individual aggregates on surfaces over time. This ability allows for dynamic studies of the aggregation process and direct observation of the interplay between different types of aggregates.     

Imaging mixed lipid monolayers by dynamic atomic force microscopy.

Phase imaging with tapping mode atomic force microscopy (AFM) and force modulation microscopy were used to probe the mechanical properties of phase-separated lipid monolayers made of a mixture (0.25:0.75) of the surface-active lipopeptide surfactin and of dipalmitoylphosphatidylcholine (DPPC). The pi-A isotherms and the result of a molecular modeling study revealed a loose, 2-D liquid-like organization for the surfactin molecules and a closely packed, 2-D solid-like organization for DPPC molecules. This difference in molecular organization was responsible for a significant contrast in height, tapping mode phase and force modulation amplitude images. Phase imaging at light tapping, i.e., with a ratio of the set-point tapping amplitude with respect to the free amplitude A(sp)/A(0) approximately 0.9, showed larger phase shifts on the solid-like DPPC domains attributed to larger Young's modulus. However, contrast inversion was observed for A(sp)/A(0)<0.7, suggesting that at moderate and hard tapping the image contrast was dominated by the probe-sample contact area. Surprisingly, force modulation amplitude images showed larger stiffness for the liquid-like surfactin domains, suggesting that the contrast was dominated by contact area effects rather than by Young's modulus. These data emphasize the complex nature of the contrast mechanisms of dynamic AFM images recorded on mixed lipid monolayers.     

Imaging of nucleic acids with atomic force microscopy

Atomic force microscopy (AFM) is a key tool of nanotechnology with great importance in applications to DNA nanotechnology and to the recently emerging field of RNA nanotechnology. Advances in the methodology of AFM now enable reliable and reproducible imaging of DNA of various structures, topologies, and DNA and RNA nanostructures. These advances are reviewed here with emphasis on methods utilizing modification of mica to prepare the surfaces enabling reliable and reproducible imaging of DNA and RNA nanostructures. Since the AFM technology for DNA is more mature, AFM imaging of DNA is introduced in this review to provide experience and background for the improvement of AFM imaging of RNA. Examples of imaging different structures of RNA and DNA are discussed and illustrated. Special attention is given to the potential use of AFM to image the dynamics of nucleic acids at the nanometer scale. As such, we review recent advances with the use of time-lapse AFM.     

Imaging of human metaphase chromosomes by atomic force microscopy in liquid

Human metaphase chromosomes were observed using an intermittent contact mode of atomic force microscopy (AFM) in a phosphate-buffered saline solution to clarify their conformation close to that in the physiological state. In the AFM images in liquid, symmetric alternating ridges and grooves were evident on their surface of the paired sister chromatids. The number of the ridges and grooves were rather specific to the type of the chromosome. The structural changes of chromosomes caused by trypsin treatment were also directly observable using AFM in liquid. These results suggest that the intermittent contact mode AFM is useful not only for analyzing the structure of chromosomes in a liquid condition but also for studying the effect of chemical treatments on chromosomes in relation to their structural changes.     

Secondary conformations and temperature effect on structural transformation of amyloid beta (1-28), (1-40) and (1-42) peptides

Secondary structure of three amyloid b-peptides [A beta(1-28), A beta(1-40) and A beta(1-42)] in the solid state was respectively determined by Fourier transform infrared (FT-IR) microspectroscopy. Their thermal-dependent structural transformation were also investigated by FT-IR microspectroscopy equipped with a thermal analyzer. The present result demonstrates that the solid-state A beta(1-28), A beta(1-40) and A beta(1-42) peptides showed a significant IR spectral difference in the amide I and II bands. The secondary conformation of A beta(1-28) peptide was the combination of major beta-sheet and minor alpha-helix with little random coil structures, but A beta(1-40) peptide showed the co-existence of major beta-sheet and minor random coil with little alpha-helix structures. A beta(1-42) peptide mainly consisted of the predominant b-sheet structure. Although the intact A beta(1-28), A beta(1-40) or A beta(1-42) peptide exhibits a different secondary structure, a similar beta-conformation may form after thermal treatment. A thermal-dependent transition was found for solid A beta(1-28) and A beta(1-40) peptides near 40 degrees C and 45 degrees C, respectively. There was no transition temperature for solid A beta(1-42) peptide, however, due to only a very little level of alpha-helix and random coil structure containing in the solid A beta(1-42) peptide. The thermal denaturation plays an important role in the structural transformation from alpha-helix/random coil to beta-sheet.