Biotechnological potential of Azolla filiculoides for biosorption of Cs and Sr: Application of micro-PIXE for measurement of biosorption

The presence of Cs and Sr in culture medium of Azolla filiculoides caused about 27.4% and 46.3% inhibition of biomass growth, respectively, in comparison to A. filiculoides control weight which had not metals. Biosorption batch experiments were conducted to determine the Cs and Sr binding ability of native biomass and chemically modified biosorbents derived from Azolla namely ferrocyanide Azolla sorbents type 1 and type 2 (FAS1 and FAS2) and hydrogen peroxide Azolla sorbent (HAS). The best Cs and Sr removal results were obtained when A. filiculoides was treated by 2 M MgCl₂ and 30 ml H₂O₂ 8 mM at pH 7 for 12 h and it was then washed by NaOH solution at pH 10.5 for 6 h. Pretreatment of Azolla have been suggested to modify the surface characteristics which could improve biosorption process. The binding of Cs and Sr on the cell wall of Azolla was studied with micro-PIXE and FT-IR.     

Use of Spirulina platensis micro and nanoparticles for the removal synthetic dyes from aqueous solutions by biosorption

In this research, micro and nanoparticles of Spirulina platensis dead biomass were obtained, characterized and employed to removal FD&C red no. 40 and acid blue 9 synthetic dyes from aqueous solutions. The effects of particle size (micro and nano) and biosorbent dosage (from 50 to 750 mg) were studied. Pseudo-first order, pseudo-second order and Elovich models were used to evaluate the biosorption kinetics. The biosorption nature was verified using energy dispersive X-ray spectroscopy (EDS). The best results for both dyes were found using 250 mg of nanoparticles, in these conditions, the biosorption capacities were 295 mg g^?1 and 1450 mg g^?1, and the percentages of dye removal were 15.0 and 72.5% for the FD&C red no. 40 and acid blue 9, respectively. Pseudo-first order model was the more adequate to represent the biosorption of both dyes onto microparticles, and Elovich model was more appropriate to the biosorption onto nanoparticles. The EDS results suggested that the dyes biosorption onto microparticles occurred mainly by physical interactions, and for the nanoparticles, chemisorption was dominant.     

Modeling studies on mono and binary component biosorption of phenol and cyanide from aqueous solution onto activated carbon derived from saw dust

Biosorption is an effective treatment method for the removal of phenol and cyanide from aqueous solution by saw dust activated carbon (SDAC). Batch experiments were achieved as a function of several experimental parameters, i.e. influence of biosorbent dose (5–60 g/L) contact time (2–40 h), pH (4–12), initial phenol concentration (100–1000 mg/L) and initial cyanide concentration (10–100 mg/L) and temperature (20–40 °C). The biosorption capacities of the biosorbent were detected as 178.85 mg/g for phenol with 300 mg/L of initial concentration and 0.82 mg/g for cyanide with 30 mg/L of initial concentration. The optimum pH is found to be 8 for phenol and 9 for cyanide biosorption. The mono component biosorption equilibrium data for both phenol and cyanide were well defined by Redlich–Peterson model and binary component adsorption equilibrium data well fitted by extended Freundlich model. The percentage removal of phenol and cyanide using SDAC was 66.67% and 73.33%, respectively. Equilibrium established within 30 h for phenol and 28 h for cyanide. Kinetic studies revealed that biosorption of phenol followed pseudo second order indicating adsorption through chemisorption and cyanide followed pseudo first order kinetic model indicating adsorption through physisorption. Thermodynamic studies parameters, i.e., enthalpy (Δh₀), entropy (ΔS₀) and Gibb’s free energy (ΔG₀) have also been considered for the system. Thermodynamic modeling studies revealed that the process of cyanide biosorption was endothermic and phenol biosorption was exothermic in nature.     

Biosorption kinetics and isotherm studies of Acid Red 57 by dried Cephalosporium aphidicola cells from aqueous solutions

Equilibrium, kinetics and thermodynamic studies on the removal of Acid Red 57 (AR57) by biosorption onto dried Cephalosporium aphidicola (C. aphidicola) cells have been investigated in a batch system with respect to pH, contact time and temperature. The results showed that the equilibrium time was attained within 40 min and the maximum biosorption capacity of AR57 dye onto C. aphidicola cells was 2.08 × 10⁻⁴ mol g⁻¹ or 109.41 mg g⁻¹ obtained after contact with 0.4 g dm⁻³ biosorbent concentration, pH₀ of 1 and at a temperature of 20 °C. The pseudo-second-order kinetic model was observed to provide the best correlation of the experimental data among the kinetic models studied. Biosorption isotherm models were developed and the Langmuir, Freundlich and Dubinin–Radushkevich (D–R) isotherm models were conformed well to the experimental data. The changes of free energy, enthalpy and entropy of biosorption were also evaluated for the biosorption of AR57 dye onto C. aphidicola cells.     

Desarrollo de un bioadsorbente laminar con Phanerochaete chrysosporium hipertolerante al cadmio,al níquel y al plomo para el tratamiento de aguas

BackgroundThe use of basidiomycetes for metal removal is an alternative to traditional methods. In this, the biomass acts as a natural ionic exchanger removing metals from solution.ObjectiveTo develop a laminar biosorbent using a basidiomycete fungus resistant to high Cd, Ni and Pb concentrations.MethodsThe tolerance of Trametes versicolor, Pleurotus ostreatus and Phanerochaete chrysosporium was evaluated using increasing concentrations of the heavy metal salts, cadmium sulphate, lead acetate and nickel chloride. A biosorbent system was developed based on polyethylene sheets with a fungal biomass. It was evaluated in bubble columns using synthetic wastewater with the 3 metal salts at a rate of 300 mg/l. Finally, in a complementary experiment using shake flasks, the effect of a higher amount of biomass related to the metal removal efficiency was evaluated.ResultsP. chrysosporium strain was more tolerant to C₄H₆O₄Pb (10,000 mg/l), Cl₂Ni (300 mg/l) and CdSO₄·8H₂O (1,500 mg/l). In a reactor, under non-ligninolytic conditions, the fungus removed 69% of the chemical oxygen demand and produced enzymes such as LiP (0.01 U/l) and MnP (0.6 U/l.). An accumulation of metals in the wall was observed. By increasing the biomass to 1.6 (w/v), the metal biosorption was favored in the mixture (57% Pb, 74% Cd, and 98% Ni) and separately (95% Pb, 60% Cd, and 56% Ni). Competition between Ni and Pb by ligands of the wall was observed.ConclusionA novel laminar system based on P. chrysosporium viable biomass was developed. It has a large surface area and tolerance to high concentrations of Cd, Ni and Pb. It seems to be an alternative for the removal of metals from water.     

Biosorption of Fe3+ from aqueous solution by a bacterial dead Streptomyces rimosus biomass

The iron biosorption capacity of a Streptomyces rimosus biomass treated with NaOH was studied in batch mode. After pretreatment of biomass at the ambient temperature, optimum conditions of biosorption were found to be: a biomass particle size between 50 and 160 μm, an average saturation contact time of 4 h, a biomass concentration of 3 g/l and a stirring speed of 250 rpm. The equilibrium data could be fitted by Langmuir isotherm equation. Under these optimal conditions, 122 mg _Fe/g_biomass were fixed.     

Removal of Zn(II) ions from aqueous solution using Moringa oleifera Lam. (horseradish tree) biomass

The removal of Zn(II) ions from aqueous solution using pure and chemically pretreated biomass of Moringa oleifera was investigated at 30 ± 1 °C in this study. The experimental results explored that the maximum pH (pH_max) for efficient sorption of Zn(II) was 7 ± 0.1 at which evaluated biosorbent dosage and biosorbent particle size, were 0.5 g/L, <0.255 mm, respectively. The cellular Zn(II) concentration increased with the concentrations of Zn(II) in solution. Pretreatment of M. oleifera biomass affected the sorption process and the uptake capacity (mg/g) of biomass for Zn(II) uptake was in following order: NaOH (45.76) > H₂SO₄ (45.00) > CTAB (42.80) > Ca(OH)₂ (42.60) > Triton X-100 (42.06) > H₃PO₄ (41.22) > Al(OH)₃ (41.06) > SDS (40.41) > HCl (37.00) > non-treated biomass (36.07). There was significant increase in uptake capacity of M. oleifera biomass, which suggested that affinity between metal and sorbent can be increased after some sort of pretreatment. Both Langmuir and Freundlich isotherm model fitted well to data of Zn(II) biosorption as represented by high value of their correlation coefficient (i.e. R² ≈ 1). Kinetic studies revealed that Zn(II) uptake was fast with 90% or more of uptake occurring with in 40 min of contact time and the equilibrium was reached in 50 min of contact time. The sorption rates were better described by a second order expression than by a more commonly applied Lagergren equation. Finally it was concluded that pretreatment of M. oleifera biomass can achieve superior Zn(II) uptake capacity in comparison to non-pretreated biomass.     

Lead biosorption efficiency of Levilactobacillus brevis MZ384011 and Levilactobacillus brevis MW362779: A response surface based approach

Lead (Pb) is a substantial contaminant in the environment and a potent toxin for living organisms. Current study describes probiotic characteristics of Pb-biosorbing lactic acid bacteria (LAB), and response surface methodology (RSM) based optimization of physical conditions for maximum Pb biosorption. A total of 18 LAB, isolated from carnivore feces (n = 8) and human breast milk (n = 9), along with one reference strain Lactobacillus acidophilus ATCC4356 were included in the study. Pb biosorption was strain specific. Eight strains, demonstrating ≥ 70 % lead biosorption, were selected for further testing. The lactobacillus-Pb complex was found to be stable and strains had a negative surface charge. The strains displayed good probiotic properties with the survival rate of 71–90 % in simulated gastric environment, 36–69 % in intestinal condition (1.8 % bile salts) and 55–72 % hydrophobicity. On the basis of excellent probiotic ability, Levilactobacillus brevis MZ384011 and Levilactobacillus brevis MW362779 were selected for optimization of physical conditions of Pb biosorption through RSM. Maximum biosorption was observed at pH 6 in 60 min at a cell density of 1 g/L. L. brevis MZ384011 and L. brevis MW362779 are recommended for experimentation on Pb toxicity amelioration and safety evaluation in in-vivo setting.     

Adsorptive removal of cadmium ions by Spirulina platensis dry biomass

Cadmium is one of the most toxic substances found in aquatic ecosystems. This metal tends to accumulate in photosynthetic plants and fish and is transferred to humans causing many diseases. It has to be removed from our environment to reduce any health risks. Dry biomass of the microalga (cyanobacterium) Spirulina platensis was used as biosorbent for the removal of cadmium ions (Cd²⁺) from aqueous solutions. The effects of different levels of pH (3–9), biomass concentration (0.25–2 g), temperature (18–46 °C), metal concentration (40–200 mg/l) and contact time (30–120 min) were tested. Batch cultures were carried out in triplicate in an orbital shaker at 150 rpm. After centrifuging the biomass, the remaining levels of cadmium ions were measured in the supernatant by Atomic Absorption Spectrometer. Very high levels of removal, reaching up to 87.69% were obtained. The highest percentage of removal was reached at pH 8, 2 g of biosorbent, 26 °C, and 60 mg/l of cadmium concentration after 90 min of contact time. Langmuir and Freundlich isotherm models were applied to describe the adsorption isotherm of the metal ions by S. platensis. Langmuir model was found to be in better correlation with experimental data (R² = 0.92). Results of this study indicated that S. platensis is a very good candidate for the removal of heavy metals from aquatic environments. The process is feasible, reliable and eco-friendly.     

Application of seaweeds for the removal of lead from aqueous solution

Ten different seaweed species were compared on the basis of lead uptake at different pH conditions. The brown seaweed, Turbinaria conoides, exhibited maximum lead uptake (at pH 4.5) and hence was selected for further studies. Sorption isotherms, obtained at different pH (4–5) and temperature (25–35 °C) conditions were fitted using Langmuir and Sips models. According to the Langmuir model, the maximum lead uptake of 439.4 mg/g was obtained at optimum pH (4.5) and temperature (30 °C). The Sips model better described the sorption isotherms with high correlation coefficients at all conditions examined. Various thermodynamic parameters such as ΔG°, ΔH° and ΔS° were calculated indicating that the present system was a spontaneous and endothermic process. Through potentiometric titrations, number of binding sites (carboxyl groups) and pK₁ were determined as 4.1 mmol/g and 4.4, respectively. The influence of co-ions (Na⁺, K⁺, Mg²⁺ and Ca²⁺) on lead uptake was well pronounced in the case of divalent ions compared to monovalent ions. The solution of 0.1 M HCl successfully eluted all lead ions from lead-loaded T. conoides biomass. The regeneration experiments revealed that the alga could be successfully reused for five cycles without any loss in lead biosorption capacity. A glass column (2 cm i.d. and 35 cm height) was used to study the continuous lead biosorption performance of T. conoides. At 25 cm (bed height), 5 ml/min (flow rate) and 100 mg/l (initial lead concentration), T. conoides exhibited lead uptake of 220.1 mg/g. The column was successfully eluted using 0.1 M HCl, with elution efficiency of 99.7%.     

Soil microbial biomass influence on growth and biocontrol efficacy of Trichoderma harzianum

Hyphal growth and biocontrol efficacy of Trichoderma harzianum may depend on its interactions with biotic components of the soil environment. Effects of soil microbial biomass on growth and biocontrol efficacy of the green fluorescent protein transformant T. harzianum ThzID1-M3 were investigated using different levels of soil microbial biomass (153, 328, or 517 μg biomass carbon/g of dry soil). Hyphal growth of T. harzianum was significantly inhibited in soil containing 328 or 517 μg biomass carbon/g of dry soil compared with soil containing 153 μg biomass carbon/g. However, when ThzID1-M3 was added to soil as an alginate pellet formulation, recoverable populations of ThzID1-M3 varied, with the highest populations in soil containing 517 μg biomass carbon/g. When sclerotia of Sclerotinia sclerotiorum were added to soils (10 sclerotia per 150 g soil) with ThzID1-M3 (20 pellets per 150 g soil), colonization of sclerotia by ThzID1-M3 was significantly lower in the soil containing the highest level of biomass. Addition of alginate pellets of ThzID1-M3 to soils (10 pellets per 50 g) resulted in increased indigenous microbial populations (total fungi, bacteria, fluorescent Pseudomonas spp., and actinomycetes). Our results suggest that higher levels of microbial soil biomass result in increased interactions between introduced T. harzianum and soil microorganisms, and further that microbial competition in soil favors a shift from hyphal growth to sporulation in T. harzianum, potentially reducing its biocontrol efficacy.     

Effects of plant diversity on biomass production and substrate nitrogen in a subsurface vertical flow constructed wetland

Most biodiversity experiments have been conducted in grassland ecosystems with nitrogen limitation, while little research has been conducted on relationships between plant biomass production, substrate nitrogen retention and plant diversity in wetlands with continuous nitrogen supply. We conducted a plant diversity experiment in a subsurface vertical flow constructed wetland for treating domestic wastewater in southeastern China. Plant aboveground biomass production ranged from 20 to 3121 g m^?2 yr^?1 across all plant communities. In general, plant biomass production was positively correlated with species richness (P = 0.001) and functional group richness (P = 0.001). Substrate nitrate concentration increased significantly with increasing plant species richness (P = 0.046), but not with functional group richness (P = 0.550). Furthermore, legumes did not affect biomass production (P = 0.255), retention of substrate nitrate (P = 0.280) and ammonium (P = 0.269). Compared to the most productive of the corresponding monocultures, transgressive overyielding of mixed plant communities did not occur in most polycultures. Because greater diversity of plant community led to higher biomass production and substrate nitrogen retention, thus we recommend that plant biodiversity should be incorporated in constructed wetlands to improve wastewater treatment efficiency.     

Removal of nutrients and heavy metals from wastewater with mangrove Sonneratia apetala Buch-Ham

Mangrove wetlands are important in the removal of nutrients, heavy metals, and organic pollutants from wastewater within estuarine systems due to the presence of oxidized and reduced conditions, periodic flooding by incoming and outgoing tides, and high clay and organic matter content. This study investigated the removal efficiency of nutrients and heavy metals from wastewater by the mangrove Sonneratia apetala Buch-Ham in a simulated wetland. Eight different treatments, namely, three concentration levels of wastewaters, with and without planting of the mangrove species, and one control (with salted water) each for both with and without planting of the mangrove species, were employed in this study. Results showed that the amounts of total mangrove biomass from different treatments were in the following order: PL-TW (planted with ten times higher-than-normal wastewater concentration) > PL-FW (planted with five times higher-than-normal wastewater concentration) > PL-SW (planted with normal wastewater concentration) > PL-NW (planted with no wastewater), whereas the magnitude of the heavy metal contents in the biomass was in the following order: Cu > Pb > Cd > Zn. Very good linear correlations existed between the biomass and the nutrients or heavy metals. The Sonneratia apetala Buch-Ham species had its own selectivity for uptake of heavy metals regardless of the initial heavy metal contents and was more effective in the removal of nutrients than heavy metals. Our study suggested that mangrove wetlands with Sonneratia apetala Buch-Ham species had great potential for the removal of nutrients and heavy metals in coastal areas.     

Cyanobacterial biomass as N-supplement to agro-waste for hyper-production of laccase from Pleurotus ostreatus in solid state fermentation

The potential application of dry biomass of a cyanobacterium Anacystis nidulans as a supplement in SSF for the production of laccase from Pleurotus ostreatus was evaluated. Experiments were carried out in solid culture using groundnut shell as a basic substrate supplemented with four independent nitrogen sources (ammonium sulphate, urea, yeast extract and dry powder of cyanobacteria). All the four supplements enhanced the enzyme yield, and yeast extract showed precedence over inorganic nitrogenous sources. However, when dry biomass of A. nidulans was used as an additive to groundnut shell (agricultural residues), it supported maximum cell growth (56.83 ± 5.56 mg/g dry substrate) and laccase production (49.21 ± 4.89 U/g dry substrate). Addition of 1 mM copper salt in the medium containing groundnut shell supplemented with yeast extract gave laccase activity of 32.64 ± 3.4 U/g dry substrate. When dry powder of cyanobacterial biomass was used as N-supplement, laccase production enhanced to 65.42 ± 6.48 U/g dry substrate. In addition to the enhancement to enzyme production inhibitory effects of high concentrations of copper was also diminished in the medium having dry cyanobacterial biomass. This study, forms the first report on the potential application of cyanobacterial biomass as an additive for production of laccase by Pleurotus ostraetus MTCC 1804 in solid state fermentation and has relevance in scale-up production of this fungal enzyme of commercial significance.     

Evaluation of fermentation waste (Corynebacterium glutamicum) as a biosorbent for the treatment of nickel(II)-bearing solutions

This research highlights the possibility of employing a fermentation industry waste (Corynebacterium glutamicum) for the removal of nickel(II) ions from aqueous solution. Furthermore, it necessitates the importance of detailed examinations on the possible differences in the biosorption performance, even for the same biomass, but from different origins. Two types of C. glutamicum, obtained from different industrial sources, were used in this study. With respect to nickel speciation and biosorption performance, pH 6 was identified as an optimal condition. Of the two types of C. glutamicum used, the biomass with excess negatively charged groups performed well in the binding of Ni²⁺ ions. To enhance the feasibility of using the biomass in column mode, as well as its reuse for multiple cycles, C. glutamicum was immobilized in a polysulfone matrix. Both the free and immobilized biomasses performed relatively well, with maximum experimental uptakes of 111.4 and 102.4 mg g⁻¹, respectively. An up-flow packed column loaded with immobilized biomass was employed for the removal of Ni²⁺ ions. The column performed well in the biosorption of nickel(II), and exhibited a delayed and favorable breakthrough curve, with Ni²⁺ uptake and percentage removal of 48.1 mg g⁻¹ biomass and 60.4%, respectively.     

High efficiency bioethanol production from barley straw using a continuous pretreatment reactor

We developed a new pretreatment process for producing high-efficiency bioethanol from a lignocellulosic biomass. Barley straw was pretreated with sodium hydroxide in a twin-screw extruder for continuous pretreatment. The biomass to ethanol ratio (BTER) for optimal pretreatment conditions was evaluated by response surface methodology. Simultaneous saccharification and fermentation (SSF) was conducted to investigate the BTER with 30 FPU/g cellulose of enzyme and 7% (v/v) yeast (Saccharomyces cerevisiae CHY 1011) using 10% (w/v) pretreated biomass under various pretreatment conditions. The maximum BTER was 73.00% under optimal pretreatment conditions (86.61 °C, 0.58 M, and 84.79 mL/min for temperature, sodium hydroxide concentration, and solution flow rate, respectively) and the experimental BTER was 70.01 ± 0.59%. SSF was performed to investigate the optimal enzyme and biomass dosage. As a result, maximum ethanol concentration and ethanol yield were 46.00 g/L and 77.36% at a loading pretreated biomass of 20% with 30 FPU/g cellulose of the enzyme dosage for barley straw to bioethanol. These results are a significant contribution to the production of bioethanol from barley straw.     

Effect of salinity on vanadate biosorption by Halomonas sp. GT-83: Preliminary investigation on biosorption by micro-PIXE technique

Thirty-eight soil samples were collected from crude oil contaminated land in south of Iran. Initial screening of a total of 100 bacterial isolates, resulted in the selection of one isolate with maximum adsorption capacity of 52.7 mg vanadate/g dry weight. It was tentatively identified as Halomonas sp. according to morphological and biochemical properties and named strain GT-83. Removal of vanadate by biosorption with Halomonas sp. GT-83 was very sensitive to solution pH. Vanadate adsorption decreased with increasing pH, with maximum adsorption capacities achieved in at pH 3.0 in the absence and in the presence of increasing concentrations of salt. Vanadate-salt biosorption studies were also performed at this pH value. Equilibrium uptakes of vanadate increased with increasing vanadate concentration up to 600 mg/l. Maximum metal removal (91.8%) took place at pH 3.0 with initial vanadate concentration of 100 mg/l, which got reduced (84.8%) in the presence of 50 g/l salt. The equilibrium sorption data were analyzed by using Freundlich isotherm. The specific uptake of vanadate increased at low cell concentration and decreased when cell concentration exceeded 0.75 g/l. The paper also demonstrates the potential value of micro-PIXE in biosorption studies.     

Microencapsulating aerial conidia of Trichoderma harzianum through spray drying at elevated temperatures

Conidia of Trichoderma harzianum produced from either solid or liquid fermentation must be dried to prevent spoilage by microbial contamination, and to induce dormancy for formulation development and prolonged self-life. Drying conidia of Trichoderma spp. in large scale production remains the major constraint because conidia lose viability during the drying process at elevated temperatures. Moreover, caking must be avoided during drying because heat generated by milling conidial chunks will kill conidia. It is ideal to dry conidia into a flow-able powder for further formulation development. A method was developed for microencapsulation of Trichoderma conidia with sugar through spray drying. Microencapsulation with sugars, such as sucrose, molasses or glycerol, significantly (P < 0.05) increased the survival percentages of conidia after drying. Microencapsulation of conidia with 2% sucrose solution resulted in the highest survival percentage when compared with other sucrose concentrations and had about 7.5 × 10¹⁰ cfu in each gram of dried conidia, and 3.4 mg of sucrose added to each gram of dried conidia. The optimal inlet/outlet temperature setting was 60/31 °C for spray drying and microencapsulation. The particle size of microencapsulated conidia balls ranged from 10 to 25 μm. The spray dried biomass of T. harzianum was a flow-able powder with over 99% conidia, which could be used in a variety of formulation developments from seed coatings to sprayable formulations.